tailscale

Commit Graph

Author	SHA1	Message	Date
Avery Pennarun	286f96e412	control/controlclient: fix a very rare httptest.Server log.Printf. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Brad Fitzpatrick	040a0d5121	derp/derphttp: don't use x/net/proxy for SOCKS on iOS We don't want those extra dependencies on iOS, at least yet. Especially since there's no way to set the relevant environment variables so it's just bloat with no benefits. Perhaps we'll need to do SOCKS on iOS later, but probably differently if/when so. Updates #227 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Avery Pennarun	fc88e34f42	wgengine/magicsock/tests: wait for home DERP connection before sending packets. This fixes an elusive test flake. Fixes #161. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	4f128745d8	magicsock/test: oops, fix a data race in nested-test logf hack. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	42a0e0c601	wgengine/magicsock/tests: call tstest.ResourceCheck for each test. This didn't catch anything yet, but it's good practice for detecting goroutine leaks that we might not find otherwise. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	08acb502e5	Add tstest.PanicOnLog(), and fix various problems detected by this. If a test calls log.Printf, 'go test' horrifyingly rearranges the output to no longer be in chronological order, which makes debugging virtually impossible. Let's stop that from happening by making log.Printf panic if called from any module, no matter how deep, during tests. This required us to change the default error handler in at least one http.Server, as well as plumbing a bunch of logf functions around, especially in magicsock and wgengine, but also in logtail and backoff. To add insult to injury, 'go test' also rearranges the output when a parent test has multiple sub-tests (all the sub-test's t.Logf is always printed after all the parent tests t.Logf), so we need to screw around with a special Logf that can point at the "current" t (current_t.Logf) in some places. Probably our entire way of using subtests is wrong, since 'go test' would probably like to run them all in parallel if you called t.Parallel(), but it definitely can't because the're all manipulating the shared state created by the parent test. They should probably all be separate toplevel tests instead, with common setup/teardown logic. But that's a job for another time. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	e0b666c5d2	tstest.ResourceCheck: clarify success message. Inclusion of the word "assert" made it seem like a failure, even though it was supposed to be identifying the name of the function (Assert()). Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	89a6f27cf8	Merge remote-tracking branch 'origin/master' into base * origin/master: types/logger: add ArgWriter wgengine: wrap tun.Device to support filtering and packet injection (#358)	5 years ago
Avery Pennarun	a7edf11a40	{ipn,control/controlclient}/tests: pass a logf function to control.New(). This matches the new API requirements. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Brad Fitzpatrick	fe97bedf67	types/logger: add ArgWriter	5 years ago
Dmytro Shynkevych	33b2f30cea	wgengine: wrap tun.Device to support filtering and packet injection (#358 ) Right now, filtering and packet injection in wgengine depend on a patch to wireguard-go that probably isn't suitable for upstreaming. This need not be the case: wireguard-go/tun.Device is an interface. For example, faketun.go implements it to mock a TUN device for testing. This patch implements the same interface to provide filtering and packet injection at the tunnel device level, at which point the wireguard-go patch should no longer be necessary. This patch has the following performance impact on i7-7500U @ 2.70GHz, tested in the following namespace configuration: ┌────────────────┐ ┌─────────────────────────────────┐ ┌────────────────┐ │ $ns1 │ │ $ns0 │ │ $ns2 │ │ client0 │ │ tailcontrol, logcatcher │ │ client1 │ │ ┌─────┐ │ │ ┌──────┐ ┌──────┐ │ │ ┌─────┐ │ │ │vethc│───────┼────┼──│vethrc│ │vethrs│──────┼─────┼──│veths│ │ │ ├─────┴─────┐ │ │ ├──────┴────┐ ├──────┴────┐ │ │ ├─────┴─────┐ │ │ │10.0.0.2/24│ │ │ │10.0.0.1/24│ │10.0.1.1/24│ │ │ │10.0.1.2/24│ │ │ └───────────┘ │ │ └───────────┘ └───────────┘ │ │ └───────────┘ │ └────────────────┘ └─────────────────────────────────┘ └────────────────┘ Before: --------------------------------------------------- \| TCP send \| UDP send \| \|------------------------\|------------------------\| \| 557.0 (±8.5) Mbits/sec \| 3.03 (±0.02) Gbits/sec \| --------------------------------------------------- After: --------------------------------------------------- \| TCP send \| UDP send \| \|------------------------\|------------------------\| \| 544.8 (±1.6) Mbits/sec \| 3.13 (±0.02) Gbits/sec \| --------------------------------------------------- The impact on receive performance is similar. Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	5 years ago
David Anderson	9ccbcda612	wgengine/router: rename config.Settings to config.Config, make pointer. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	72cae5504c	wgengine: generate and plumb router.Settings in from ipn. This saves a layer of translation, and saves us having to pass in extra bits and pieces of the netmap and prefs to wgengine. Now it gets one Wireguard config, and one OS network stack config. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	e42ec4efba	derp/derphttp: use SOCKS/etc proxies for derphttp dials Updates #227 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Wendi Yu	3663797815	Reduce logspam from node with no peers Signed-off-by: Wendi Yu <wendi.yu@yahoo.ca>	5 years ago
David Anderson	cd01bcc395	wgengine/router: allow loopback traffic from our own IP(s). Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	64f6104e63	portlist: reduce log spam/scariness for portlist in mac sandbox Fixes tailscale/corp#235	5 years ago
David Anderson	bfdc8175b1	wgengine/router: add a setting to disable SNAT for subnet routes. Part of #320. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	8eda667aa1	types/logger: simplify mutex locking in rate-limited logger Updates #365 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
halulu	874be6566d	netcheck: DERP latency over HTTPS when UDP is blocked * netcheck: DERP letency over HTTPS when UDP failed Updates #207 Signed-off-by: Zijie Lu <zijie@tailscale.com> * netcheck: async DERP latency check over HTTPS Updates #207 Signed-off-by: Zijie Lu <zijie@tailscale.com> * netcheck: DERP latency check over HTTPS: fix concurrent map Updates #207 Signed-off-by: Zijie Lu <zijie@tailscale.com> * netcheck: DERP latency check over HTTPS: some improvements Updates #207 Signed-off-by: Zijie Lu <zijie@tailscale.com> * netcheck: DERP latency check over HTTPS: use timeout context Updates #207 Signed-off-by: Zijie Lu <zijie@tailscale.com> * netcheck: DERP latency check over HTTPS: use report mutex Updates #207 Signed-off-by: Zijie Lu <zijie@tailscale.com> * netcheck: DERP latency check over HTTPS if UDP is BLOCKED Updates #207 Signed-off-by: Zijie Lu <zijie@tailscale.com> * netcheck: DERP latency check over HTTPS: new function measureHTTPSLatency Updates #207 Signed-off-by: Zijie Lu <zijie@tailscale.com>	5 years ago
Brad Fitzpatrick	8a3e77fc43	ipn, wgengine/filter: remove exported type aliases	5 years ago
David Anderson	8b0be7475b	cmd/tailscale: warn subnet route users if IP forwarding is off. #320 Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	ad1cfe8bbe	cmd/tailscale: support IPs or CIDRs in -advertise-routes. Fixes #370. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	21ac65d3da	wgengine/router: explicitly detect and complain about busybox's `ip`. Defensive programming against #368 in environments other than Docker, e.g. if you try using Tailscale in Alpine Linux directly, sans container. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	e00b814a24	Dockerfile: install iproute2 in the container image. Fixes #368. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	381b94d4d1	wgengine/router: include command output if `ip rule list` fails. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	e83d02ffd1	wgengine: don't double-close tundev on setup error. Part of #368. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	efc1feedc9	wgengine/router: include more information when iptables ops fail. The iptables package we use doesn't include command output, so we're left with guessing what went wrong most of the time. This will at least narrow things down to which operation failed. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	529e2cb31a	ipn: add AllowVersionSkew bool to Notify & Message For "tailscale status" on macOS (from separately downloaded cmd/tailscale binary against App Store IPNExtension). (This isn't all of it, but I've had this sitting around uncommitted.)	5 years ago
Wendi Yu	fde384b359	Fix macOS build staticcheck used to fail on macOS (and presumably windows) due to a variable declared in a common package that was only used by the Linux build, which would prevent `redo pr` from passing on Mac. Moved variable declaration from the common file to the Linux-specific one to resolve the compiler complaint. Signed-off-by: Wendi Yu <wendi.yu@yahoo.ca>	5 years ago
David Anderson	e16f7e48a3	wgengine: simplify wgcfg.* to netaddr.* conversion. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	48b1e85e8a	types/logger: fix deadlock in the burst case. Fixes #365. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	ccbd0937d0	wgengine: avoid v6 mapped v4 IPs when converting to netaddr types. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Sylvain Rabot	74d6ab995d	ipn/ipnstate: improve HTML output Signed-off-by: Sylvain Rabot <sylvain@abstraction.fr>	5 years ago
Wendi Yu	0c69b4e00d	Implement rate limiting on log messages (#356 ) Implement rate limiting on log messages Addresses issue #317, where logs can get spammed with the same message nonstop. Created a rate limiting closure on logging functions, which limits the number of messages being logged per second based on format string. To keep memory usage as constant as possible, the previous cache purging at periodic time intervals has been replaced by an LRU that discards the oldest string when the capacity of the cache is reached. Signed-off-by: Wendi Yu <wendi.yu@yahoo.ca>	5 years ago
Wendi Yu	499c8fcbb3	Replace our ratelimiter with standard rate package (#359 ) * Replace our ratelimiter with standard rate package Signed-off-by: Wendi Yu <wendi.yu@yahoo.ca>	5 years ago
David Anderson	b01db109f5	wgengine/router: use inet.af/netaddr, not wgcfg.CIDR. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	b8f01eed34	wgengine/router: remove wireguard-go config from settings. Instead, pass in only exactly the relevant configuration pieces that the OS network stack cares about. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	8861bb5a19	wgengine/router: alter API to support multiple addrs, and use on linux. FreeBSD and OpenBSD will error out with a complaint if we pass >1 address right now, but we don't yet so that's okay.	5 years ago
David Anderson	6802481bf5	wgengine/router: don't use gateway routes on linux.	5 years ago
David Anderson	78b1ed39ea	wgengine/router: add more documentation.	5 years ago
David Anderson	c9de43cd59	wgengine/router: fix typo. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	89af51b84d	wgengine: plumb locally advertised subnet routes. With this change, advertising subnet routes configures the firewall correctly. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	89198b1691	wgengine/router: rewrite netfilter and routing logic. New logic installs precise filters for subnet routes, plays nice with other users of netfilter, and lays the groundwork for fixing routing loops via policy routing. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	7618d7e677	wgengine/router: simplify some cmd invocations. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Zijie Lu	e3559d1c45	cmd/netcheck: better DERP latency checking output Fixes #206 Signed-off-by: Zijie Lu <zijie@tailscale.com>	5 years ago
Dmytro Shynkevych	46f4b18fe8	control/controlclient: revert extreneous synchronization. Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	5 years ago
Dmytro Shynkevych	3b94eabee3	control/controlclient: synchronize hostinfo test. Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	5 years ago
Brad Fitzpatrick	44b07aa708	netcheck: STUN less aggressively to known distant servers If Australia's far away and not going to be used, it's still going to be far away a minute later. No need to send backup just-in-case-UDP-gets-lost STUN packets to the known far away destinations. Those are the ones most likely to trigger retries due to delay anyway (in random 50-250ms, currently). But we'll keep sending 1 packet to them, just in case our airplane landed. Likewise, be less aggressive with IPv6. The main point is just to see whether IPv6 works. No need to send up to 10 packets every round. Max two is enough (except for the first round). This does mean our STUN traffic graphs for IPv4-vs-IPv6 will change shape. Oh well. It was a weird eyeball metric for IPv6 connectivity anyway and we have better metrics. We can tweak this policy over time. It's factored out and has tests now.	5 years ago
Brad Fitzpatrick	828aa6dcb0	stunner: add Stunner.MaxTries option	5 years ago

... 2 3 4 5 6 ...

797 Commits (401e2ec307c878b34e3add156dc5d3e5acbad6a9) All Branches Search

797 Commits (401e2ec307c878b34e3add156dc5d3e5acbad6a9)

All Branches