tailscale

Commit Graph

Author	SHA1	Message	Date
Anton Tolchanov	654b5a0616	derp: add optional debug logging for prober clients This allows tracking packet flow via logs for prober clients. Note that the new sclient.debug() function is called on every received packet, but will do nothing for most clients. I have adjusted sclient logging to print public keys in short format rather than full. This takes effect even for existing non-debug logging (mostly client disconnect messages). Example logs for a packet being sent from client [SbsJn] (connected to derper [dM2E3]) to client [10WOo] (connected to derper [AVxvv]): ``` derper [dM2E3]: derp client 10.0.0.1:35470[SbsJn]: register single client mesh("10.0.1.1"): 4 peers derp client 10.0.0.1:35470[SbsJn]: read frame type 4 len 40 err <nil> derp client 10.0.0.1:35470[SbsJn]: SendPacket for [10WOo], forwarding via <derphttp_client.Client [AVxvv] url=https://10.0.1.1/derp>: <nil> derp client 10.0.0.1:35470[SbsJn]: read frame type 0 len 0 err EOF derp client 10.0.0.1:35470[SbsJn]: read EOF derp client 10.0.0.1:35470[SbsJn]: sender failed: context canceled derp client 10.0.0.1:35470[SbsJn]: removing connection derper [AVxvv]: derp client 10.0.1.1:50650[10WOo]: register single client derp client 10.0.1.1:50650[10WOo]: received forwarded packet from [SbsJn] via [dM2E3] derp client 10.0.1.1:50650[10WOo]: sendPkt attempt 0 enqueued derp client 10.0.1.1:50650[10WOo]: sendPacket from [SbsJn]: <nil> derp client 10.0.1.1:50650[10WOo]: read frame type 0 len 0 err EOF derp client 10.0.1.1:50650[10WOo]: read EOF derp client 10.0.1.1:50650[10WOo]: sender failed: context canceled derp client 10.0.1.1:50650[10WOo]: removing connection ``` Signed-off-by: Anton Tolchanov <anton@tailscale.com>	2 years ago
Kyle Carberry	3862a1e1d5	derp/derphttp: cleanup WebSocket connection on close This was causing a leak in our CI! Signed-off-by: Kyle Carberry <kyle@carberry.com>	2 years ago
Mihai Parparita	6ac6ddbb47	sockstats: switch label to enum Makes it cheaper/simpler to persist values, and encourages reuse of labels as opposed to generating an arbitrary number. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Mihai Parparita	9cb332f0e2	sockstats: instrument networking code paths Uses the hooks added by tailscale/go#45 to instrument the reads and writes on the major code paths that do network I/O in the client. The convention is to use "<package>.<type>:<label>" as the annotation for the responsible code path. Enabled on iOS, macOS and Android only, since mobile platforms are the ones we're most interested in, and we are less sensitive to any throughput degradation due to the per-I/O callback overhead (macOS is also enabled for ease of testing during development). For now just exposed as counters on a /v0/sockstats PeerAPI endpoint. We also keep track of the current interface so that we can break out the stats by interface. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Brad Fitzpatrick	cf8dd7aa09	all: use Go 1.20's bytes.Clone Updates #7123 Updates #6257 (more to do in other repos) Change-Id: I073e2a6d81a5d7fbecc29caddb7e057ff65239d0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	b1248442c3	all: update to Go 1.20, use strings.CutPrefix/Suffix instead of our fork Updates #7123 Updates #5309 Change-Id: I90bcd87a2fb85a91834a0dd4be6e03db08438672 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Mihai Parparita	33520920c3	all: use strs.CutPrefix and strs.CutSuffix more Updates places where we use HasPrefix + TrimPrefix to use the combined function. Updates #5309 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Brad Fitzpatrick	da8def8e13	all: remove old +build tags The //go:build syntax was introduced in Go 1.17: https://go.dev/doc/go1.17#build-lines gofmt has kept the +build and go:build lines in sync since then, but enough time has passed. Time to remove them. Done with: perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build') Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Mihai Parparita	9d04ffc782	net/wsconn: add back custom wrapper for turning a websocket.Conn into a net.Conn We removed it in #4806 in favor of the built-in functionality from the nhooyr.io/websocket package. However, it has an issue with deadlines that has not been fixed yet (see nhooyr/websocket#350). Temporarily go back to using a custom wrapper (using the fix from our fork) so that derpers will stop closing connections too aggressively. Updates #5921 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Mihai Parparita	b2855cfd86	derp/derphttp: fix nil pointer dereference when closing a netcheck client NewNetcheckClient only initializes a subset of fields of derphttp.Client, and the Close() call added by #5707 was result in a nil pointer dereference. Make Close() safe to call when using NewNetcheckClient() too. Fixes #5919 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Josh Soref	d4811f11a0	all: fix spelling mistakes Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>	2 years ago
Eng Zer Jun	f0347e841f	refactor: move from io/ioutil to io and os packages The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit replaces the existing io/ioutil functions with their new definitions in io and os packages. Reference: https://golang.org/doc/go1.16#ioutil Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>	2 years ago
Maisem Ali	a9f6cd41fd	all: use syncs.AtomicValue Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	6a396731eb	all: use various net/netip parse funcs directly Mechanical change with perl+goimports. Changed {Must,}Parse{IP,IPPrefix,IPPort} to their netip variants, then goimports -d . Finally, removed the net/netaddr wrappers, to prevent future use. Updates #5162 Change-Id: I59c0e38b5fbca5a935d701645789cddf3d7863ad Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Charlotte Brandhorst-Satzkorn	4c0feba38e	derp: plumb '/derp' request context through (#5083 ) This change is required to implement tracing for derp. Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	2 years ago
Mihai Parparita	edc90ebc61	net/wsconn: remove homegrown wrapper for turning a websocket.Conn into a net.Conn The one from the nhooyr/websocket package seems to work equally well. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Mihai Parparita	a9f32656f5	control/controlhttp: allow client and server to communicate over WebSockets We can't do Noise-over-HTTP in Wasm/JS (because we don't have bidirectional communication), but we should be able to do it over WebSockets. Reuses derp WebSocket support that allows us to turn a WebSocket connection into a net.Conn. Updates #3157 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Tom DNetto	c8f4dfc8c0	derp/derphttp,net/netcheck: improve netcheck behavior under MITM proxies In cases where tailscale is operating behind a MITM proxy, we need to consider that a lot more of the internals of our HTTP requests are visible and may be used as part of authorization checks. As such, we need to 'behave' as closely as possible to ideal. - Some proxies do authorization or consistency checks based the on Host header or HTTP URI, instead of just the IP/hostname/SNI. As such, we need to construct a `*http.Request` with a valid URI everytime HTTP is going to be used on the wire, even if its over TLS. Aside from the singular instance in net/netcheck, I couldn't find anywhere else a http.Request was constructed incorrectly. - Some proxies may deny requests, typically by returning a 403 status code. We should not consider these requests as a valid latency check, so netcheck semantics have been updated to consider >299 status codes as a failed probe. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Brad Fitzpatrick	730aa1c89c	derp/derphttp, wgengine/magicsock: prefer IPv6 to DERPs when IPv6 works Fixes #3838 Change-Id: Ie47a2a30c7e8e431512824798d2355006d72fb6a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	70d71ba1e7	cmd/derpprobe: check derper TLS certs too Change-Id: If8c48e012b294570ebbb1a46bacdc58fafbfbcc5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	41fd4eab5c	envknob: add new package for all the strconv.ParseBool(os.Getenv(..)) A new package can also later record/report which knobs are checked and set. It also makes the code cleaner & easier to grep for env knobs. Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	2c94e3c4ad	wgengine/magicsock: don't unconditionally close DERP connections on rebind Only if the source address isn't on the currently active interface or a ping of the DERP server fails. Updates #3619 Change-Id: I6bf06503cff4d781f518b437c8744ac29577acc8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	535b925d1b	derp/derphttp: add Client.Ping, SendPing methods Continuing work in `434af15a04`, to make it possible for magicsock to probe whether a DERP server is still there. Updates #3619 Change-Id: I366a77c27e93b876734e64f445b85ef01eb590f2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	434af15a04	derp: support client->server ping (and server->client pong) In prep for a future change to have client ping derp connections when their state is questionable, rather than aggressively tearing them down and doing a heavy reconnect when their state is unknown. We already support ping/pong in the other direction (servers probing clients) so we already had the two frame types, but I'd never finished this direction. Updates #3619 Change-Id: I024b815d9db1bc57c20f82f80f95fb55fc9e2fcc Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	758c37b83d	net/netns: thread logf into control functions So that darwin can log there without panicking during tests. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
David Anderson	37c150aee1	derp: use new node key type. Update #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	eebe7afad7	derp/derphttp: only log about a weird upgrade if any was specified Otherwise random browser requests to /derp cause log spam. Change-Id: I7bdf991d2106f0323868e651156c788a877a90d5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	505f844a43	cmd/derper, derp/derphttp: add websocket support Updates #3157 Change-Id: I337a919a3b350bc7bd9af567b49c4d5d6616abdd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7cf8ec8108	net/tlsdial: bake in LetsEncrypt's ISRG Root X1 root We still try the host's x509 roots first, but if that fails (like if the host is old), we fall back to using LetsEncrypt's root and retrying with that. tlsdial was used in the three main places: logs, control, DERP. But it was missing in dnsfallback. So added it there too, so we can run fine now on a machine with no DNS config and no root CAs configured. Also, move SSLKEYLOGFILE support out of DERP. tlsdial is the logical place for that support. Fixes #1609 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	e422e9f4c9	cmd/derper: mesh over VPC network Updates #2414 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	e299300b48	net/dnscache: cache all IPs per hostname Not yet used in the dialer, but plumbed around. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	05da2691a5	cmd/derper/derpprobe: add derp prober Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7e7c4c1bbe	tailcfg: break DERPNode.DERPTestPort into DERPPort & InsecureForTests The DERPTestPort int meant two things before: which port to use, and whether to disable TLS verification. Users would like to set the port without disabling TLS, so break it into two options. Updates #1264 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c81814e4f8	derp{,/derphttp},magicsock: tell DERP server when ping acks can be expected Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	79d8288f0a	wgengine/magicsock, derp, derp/derphttp: respond to DERP server->client pings No server support yet, but we want Tailscale 1.6 clients to be able to respond to them when the server can do it. Updates #1310 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	ca51529b81	derp/derphttp: return nicer errors from Recv on Close	4 years ago
Brad Fitzpatrick	741d654aa3	derp/derphttp: add a context and infoLogger option to RunWatchConnectionLoop	4 years ago
Brad Fitzpatrick	66be052a70	net/dnscache: work on IPv6-only hosts (again) This fixes the regression where we had stopped working on IPv6-only hosts. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	1e0be5a458	tshttp, derphttp: send Proxy-Authorization, not Authorization, to proxies Whoops. But weirdly, sending Authorization sometimes worked?	4 years ago
Brad Fitzpatrick	28f9cd06f5	tshttpproxy, controlclient, derphttp, logpolicy: send Negotiate auth to proxies For Windows only, and only when built with Tailscale's Go tree. Updates tailscale/corp#583	4 years ago
Brad Fitzpatrick	e415991256	derp, derp/derphttp: remove one RTT from DERP setup * advertise server's DERP public key following its ServerHello * have client look for that DEPR public key in the response PeerCertificates * let client advertise it's going into a "fast start" mode if it finds it * modify server to support that fast start mode, just not sending the HTTP response header Cuts down another round trip, bringing the latency of being able to write our first DERP frame from SF to Bangalore from ~725ms (3 RTT) to ~481ms (2 RTT: TCP and TLS). Fixes #693 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	287522730d	derp/derphttp: support standard-ish SSLKEYLOGFILE environment variable For debugging.	4 years ago
Brad Fitzpatrick	c5eb57f4d6	net/tshttpproxy: new package, support WPAD/PAC proxies on Windows Updates tailscale/corp#553 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	6b80bcf112	derp: remove a client round-trip waiting on serverInfo It just has a version number in it and it's not really needed. Instead just return it as a normal Recv message type for those that care (currently only tests). Updates #150 (in that it shares the same goal: initial DERP latency) Updates #199 (in that it removes some DERP versioning)	4 years ago
Brad Fitzpatrick	69f3ceeb7c	derp/derphttp: don't return all nil from dialRegion when STUNOnly nodes	4 years ago
Brad Fitzpatrick	4732722b87	derp: add frameClosePeer to move around clients within a region For various reasons (mostly during rollouts or config changes on our side), nodes may end up connecting to a fallback DERP node in a region, rather than the primary one we tell them about in the DERP map. Connecting to the "wrong" node is fine, but it's in our best interest for all nodes in a domain to connect to the same node, to reduce intra-region packet forwarding. This adds a privileged frame type used by the control system that can kick off a client connection when they're connected to the wrong node in a region. Then they hopefully reconnect immediately to the correct location. (If not, we can leave them alone and stop closing them.) Updates tailscale/corp#372	4 years ago
Brad Fitzpatrick	c8cf3169ba	cmd/derper, derp/derphttp: move bulk of derp mesh code into derphttp To be reused in various other tools.	4 years ago

1 2

85 Commits (3efd83555f1ec76cb4d2f23c777bbd2f9140146c)