294 Commits (1bd1b387b298a09ae49d7084e644e0f4ff0cb4c2)

Author	SHA1	Message	Date
Brad Fitzpatrick	6b95219e3a	net/netmon, add: add netmon.State type alias of interfaces.State ... ... in prep for merging the net/interfaces package into net/netmon. This is a no-op change that updates a bunch of the API signatures ahead of a future change to actually move things (and remove the type alias) Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I477613388f09389214db0d77ccf24a65bff2199c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	3672f29a4e	net/netns, net/dns/resolver, etc: make netmon required in most places ... The goal is to move more network state accessors to netmon.Monitor where they can be cheaper/cached. But first (this change and others) we need to make sure the one netmon.Monitor is plumbed everywhere. Some notable bits: * tsdial.NewDialer is added, taking a now-required netmon * because a tsdial.Dialer always has a netmon, anything taking both a Dialer and a NetMon is now redundant; take only the Dialer and get the NetMon from that if/when needed. * netmon.NewStatic is added, primarily for tests Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	745931415c	health, all: remove health.Global, finish plumbing health.Tracker ... Updates #11874 Updates #4136 Change-Id: I414470f71d90be9889d44c3afd53956d9f26cd61 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	a4a282cd49	control/controlclient: plumb health.Tracker ... Updates #11874 Updates #4136 Change-Id: Ia941153bd83523f0c8b56852010f5231d774d91a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	723c775dbb	tsd, ipnlocal, etc: add tsd.System.HealthTracker, start some plumbing ... This adds a health.Tracker to tsd.System, accessible via a new tsd.System.HealthTracker method. In the future, that new method will return a tsd.System-specific HealthTracker, so multiple tsnet.Servers in the same process are isolated. For now, though, it just always returns the temporary health.Global value. That permits incremental plumbing over a number of changes. When the second to last health.Global reference is gone, then the tsd.System.HealthTracker implementation can return a private Tracker. The primary plumbing this does is adding it to LocalBackend and its dozen and change health calls. A few misc other callers are also plumbed. Subsequent changes will flesh out other parts of the tree (magicsock, controlclient, etc). Updates #11874 Updates #4136 Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	ebc552d2e0	health: add Tracker type, in prep for removing global variables ... This moves most of the health package global variables to a new `health.Tracker` type. But then rather than plumbing the Tracker in tsd.System everywhere, this only goes halfway and makes one new global Tracker (`health.Global`) that all the existing callers now use. A future change will eliminate that global. Updates #11874 Updates #4136 Change-Id: I6ee27e0b2e35f68cb38fecdb3b2dc4c3f2e09d68 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	5100bdeba7	types/persist: remove unused field Persist.Provider ... It was only obviously unused after the previous change, c39cde79d. Updates #19334 Change-Id: I9896d5fa692cb4346c070b4a339d0d12340c18f7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	c39cde79d2	tailcfg: remove some unused fields from RegisterResponseAuth ... Fixes #19334 Change-Id: Id6463f28af23078a7bc25b9280c99d4491bd9651 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	05bfa022f2	tailcfg: pointerify RegisterRequest.Auth, omitemptify RegisterResponseAuth ... We were storing server-side lots of: "Auth":{"Provider":"","LoginName":"","Oauth2Token":null,"AuthKey":""}, That was about 7% of our total storage of pending RegisterRequest bodies. Updates tailscale/corp#19327 Change-Id: Ib73842759a2b303ff5fe4c052a76baea0d68ae7d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	2409661a0d	control/controlclient: delete old naclbox code, require ts2021 Noise ... Updates #11585 Updates tailscale/corp#18882 Change-Id: I90e2e4a211c58d429e2b128604614dde18986442 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
James Tucker	9401b09028	control/controlclient: move client watchdog to cover initial request ... The initial control client request can get stuck in the event that a connection is established but then lost part way through, without any ICMP or RST. Ensure that the control client will be restarted by timing out that initial request as well. Fixes #11542 Signed-off-by: James Tucker <james@tailscale.com>	8 months ago
Brad Fitzpatrick	8444937c89	control/controlclient: fix panic regression from earlier load balancer hint header ... In the recent 20e9f3369 we made HealthChangeRequest machine requests include a NodeKey, as it was the oddball machine request that didn't include one. Unfortunately, that code was sometimes being called (at least in some of our integration tests) without a node key due to its registration with health.RegisterWatcher(direct.ReportHealthChange). Fortunately tests in corp caught this before we cut a release. It's possible this only affects this particular integration test's environment, but still worth fixing. Updates tailscale/corp#1297 Change-Id: I84046779955105763dc1be5121c69fec3c138672 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Joe Tsai	85febda86d	all: use zstdframe where sensible (#11491) ... Use the zstdframe package where sensible instead of plumbing around our own zstd.Encoder just for stateless operations. This causes logtail to have a dependency on zstd, but that's arguably okay since zstd support is implicit to the protocol between a client and the logging service. Also, virtually every caller to logger.NewLogger was manually setting up a zstd.Encoder anyways, meaning that zstd was functionally always a dependency. Updates #cleanup Updates tailscale/corp#18514 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	8 months ago
Brad Fitzpatrick	20e9f3369d	control/controlclient: send load balancing hint HTTP request header ... Updates tailscale/corp#1297 Change-Id: I0b102081e81dfc1261f4b05521ab248a2e4a1298 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
James 'zofrex' Sanderson	124dc10261	controlclient,tailcfg,types: expose MaxKeyDuration via localapi (#10401) ... Updates tailscale/corp#16016 Signed-off-by: James Sanderson <jsanderson@tailscale.com>	11 months ago
Andrew Lytvynov	945cf836ee	ipn: apply tailnet-wide default for auto-updates (#10508) ... When auto-update setting in local Prefs is unset, apply the tailnet default value from control. This only happens once, when we apply the default (or when the user manually overrides it), tailnet default no longer affects the node. Updates #16244 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	11 months ago
Matt Layher	a217f1fccf	all: fix nilness issues ... Signed-off-by: Matt Layher <mdlayher@gmail.com>	12 months ago
Brad Fitzpatrick	44c6909c92	control/controlclient: move watchdog out of mapSession ... In prep for making mapSession's lifetime not be 1:1 with a single HTTP response's lifetime, this moves the inactivity timer watchdog out of mapSession and into the caller that owns the streaming HTTP response. (This is admittedly closer to how it was prior to the mapSession type existing, but that was before we connected some dots which were impossible to even see before the mapSession type broke the code up.) Updates #7175 Change-Id: Ia108dac84a4953db41cbd30e73b1de4a2a676c11 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	c87d58063a	control/controlclient: move lastPrintMap field from Direct to mapSession ... It was a really a mutable field owned by mapSession that we didn't move in earlier commits. Once moved, it's then possible to de-func-ify the code and turn it into a regular method rather than an installed optional hook. Noticed while working to move map session lifetimes out of Direct.sendMapRequest's single-HTTP-connection scope. Updates #7175 Updates #cleanup Change-Id: I6446b15793953d88d1cabf94b5943bb3ccac3ad9 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Claire Wang	754fb9a8a8	tailcfg: add tailnet field to register request (#9675) ... Updates tailscale/corp#10967 Signed-off-by: Claire Wang <claire@tailscale.com>	1 year ago
Brad Fitzpatrick	425cf9aa9d	tailcfg, all: use []netip.AddrPort instead of []string for Endpoints ... It's JSON wire compatible. Updates #cleanup Change-Id: Ifa5c17768fec35b305b06d75eb5f0611c8a135a6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	3b32d6c679	wgengine/magicsock, controlclient, net/dns: reduce some logspam ... Updates #cleanup Change-Id: I78b0697a01e94baa33f3de474b591e616fa5e6af Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	9203916a4a	control/controlknobs: move more controlknobs code from controlclient ... Updates #cleanup Change-Id: I2b8b6ac97589270f307bfb20e33674894ce873b5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	3af051ea27	control/controlclient, types/netmap: start plumbing delta netmap updates ... Currently only the top four most popular changes: endpoints, DERP home, online, and LastSeen. Updates #1909 Change-Id: I03152da176b2b95232b56acabfb55dcdfaa16b79 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	42072683d6	control/controlknobs: move ForceBackgroundSTUN to controlknobs.Knobs ... This is both more efficient (because the knobs' bool is only updated whenever Node is changed, rarely) and also gets us one step closer to removing a case of storing a netmap.NetworkMap in magicsock. (eventually we want to phase out much of the use of that type internally) Updates #1909 Change-Id: I37e81789f94133175064fdc09984e4f3a431f1a1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	4e91cf20a8	control/controlknobs, all: add plumbed Knobs type, not global variables ... Previously two tsnet nodes in the same process couldn't have disjoint sets of controlknob settings from control as both would overwrite each other's global variables. This plumbs a new controlknobs.Knobs type around everywhere and hangs the knobs sent by control on that instead. Updates #9351 Change-Id: I75338646d36813ed971b4ffad6f9a8b41ec91560 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	9a86aa5732	all: depend on zstd unconditionally, remove plumbing to make it optional ... All platforms use it at this point, including iOS which was the original hold out for memory reasons. No more reason to make it optional. Updates #9332 Change-Id: I743fbc2f370921a852fbcebf4eb9821e2bdd3086 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Maisem Ali	d06a75dcd0	ipn/ipnlocal: fix deadlock in resetControlClientLocked ... resetControlClientLocked is called while b.mu was held and would call cc.Shutdown which would wait for the observer queue to drain. However, there may be active callbacks from cc already waiting for b.mu resulting in a deadlock. This makes it so that resetControlClientLocked does not call Shutdown, and instead just returns the value. It also makes it so that any status received from previous cc are ignored. Updates tailscale/corp#12827 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Brad Fitzpatrick	f7b7ccf835	control/controlclient, ipn/ipnlocal: unplumb a bool true literal opt ... Updates #cleanup Change-Id: I664f280a2e06b9875942458afcaf6be42a5e462a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	313a129fe5	control/controlclient: use slices package more ... Updates #cleanup Change-Id: Ic17384266dc59bc4e710efdda311d6e0719529da Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	55bb7314f2	control/controlclient: replace a status func with Observer interface ... For now the method has only one interface (the same as the func it's replacing) but it will grow, eventually with the goal to remove the controlclient.Status type for most purposes. Updates #1909 Change-Id: I715c8bf95e3f5943055a94e76af98d988558a2f2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	84b94b3146	types/netmap, all: make NetworkMap.SelfNode a tailcfg.NodeView ... Updates #1909 Change-Id: I8c470cbc147129a652c1d58eac9b790691b87606 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	b5ff68a968	control/controlclient: flesh out mapSession to break up gigantic method ... Now mapSession has a bunch more fields and methods, rather than being just one massive func with a ton of local variables. So far there are no major new optimizations, though. It should behave the same as before. This has been done with an eye towards testability (so tests can set all the callback funcs as needed, or not, without a huge Direct client or long-running HTTP requests), but this change doesn't add new tests yet. That will follow in the changes which flesh out the NetmapUpdater interface. Updates #1909 Change-Id: Iad4e7442d5bbbe2614bd4b1dc4b02e27504898df Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	165f0116f1	types/netmap: move some mutations earlier, remove, document some fields ... And optimize the Persist setting a bit, allocating later and only mutating fields when there's been a Node change. Updates #1909 Change-Id: Iaddfd9e88ef76e1d18e8d0a41926eb44d0955312 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	21170fb175	control/controlclient: scope a variable tighter, de-pointer a *time.Time ... Just misc cleanups. Updates #1909 Change-Id: I9d64cb6c46d634eb5fdf725c13a6c5e514e02e9a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	7dec09d169	control/controlclient: remove Opts.KeepSharerAndUserSplit ... It was added 2.5 years ago in c1dabd9436 but was never used. Clearly that migration didn't matter. We can attempt this again later if/when this matters. Meanwhile this simplifies the code and thus makes working on other current efforts in these parts of the code easier. Updates #1909 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	121d1d002c	tailcfg: add nodeAttrs for forcing OneCGNAT on/off [capver 71] ... Updates #8923 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	25663b1307	tailcfg: remove most Debug fields, move bulk to nodeAttrs [capver 70] ... Now a nodeAttr: ForceBackgroundSTUN, DERPRoute, TrimWGConfig, DisableSubnetsIfPAC, DisableUPnP. Kept support for, but also now a NodeAttr: RandomizeClientPort. Removed: SetForceBackgroundSTUN, SetRandomizeClientPort (both never used, sadly... never got around to them. But nodeAttrs are better anyway), EnableSilentDisco (will be a nodeAttr later when that effort resumes). Updates #8923 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	239ad57446	tailcfg: move LogHeapPprof from Debug to c2n [capver 69] ... And delete Debug.GoroutineDumpURL, which was already in c2n. Updates #8923 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	2398993804	control/controlclient: refactor in prep for optimized delta handling ... See issue. This is a baby step towards passing through deltas end-to-end from node to control back to node and down to the various engine subsystems, not computing diffs from two full netmaps at various levels. This will then let us support larger netmaps without burning CPU. But this change itself changes no behavior. It just changes a func type to an interface with one method. That paves the way for future changes to then add new NetmapUpdater methods that do more fine-grained work than updating the whole world. Updates #1909 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Maisem Ali	d16946854f	control/controlclient: add Auto.updateRoutine ... Instead of having updates replace the map polls, create a third goroutine which is solely responsible for making sure that control is aware of the latest client state. This also makes it so that the streaming map polls are only broken when there are auth changes, or the client is paused. Updates tailscale/corp#5761 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	734928d3cb	control/controlclient: make Direct own all changes to Persist ... It was being modified in two places in Direct for the auth routine and then in LocalBackend when a new NetMap was received. This was confusing, so make Direct also own changes to Persist when a new NetMap is received. Updates #7726 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	6aaf1d48df	types/persist: drop duplicated Persist.LoginName ... It was duplicated from Persist.UserProfile.LoginName, drop it. Updates #7726 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
salman aljammaz	25a7204bb4	wgengine,ipn,cmd/tailscale: add size option to ping (#8739) ... This adds the capability to pad disco ping message payloads to reach a specified size. It also plumbs it through to the tailscale ping -size flag. Disco pings used for actual endpoint discovery do not use this yet. Updates #311. Signed-off-by: salman <salman@tailscale.com> Co-authored-by: Val <valerie@tailscale.com>	1 year ago
Claire Wang	a17c45fd6e	control: use tstime instead of time (#8595) ... Updates #8587 Signed-off-by: Claire Wang <claire@tailscale.com>	1 year ago
Maisem Ali	60e5761d60	control/controlclient: reset backoff in mapRoutine on netmap recv ... We were never resetting the backoff in streaming mapResponses. The call to `PollNetMap` always returns with an error. Changing that contract is harder, so manually reset backoff when a netmap is received. Updates tailscale/corp#12894 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Andrew Dunham	42fd964090	control/controlclient: use dnscache.Resolver for Noise client ... This passes the *dnscache.Resolver down from the Direct client into the Noise client and from there into the controlhttp client. This retains the Resolver so that it can share state across calls instead of creating a new resolver. Updates #4845 Updates #6110 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ia5d6af1870f3b5b5d7dd5685d775dcf300aec7af	2 years ago
Mihai Parparita	7330aa593e	all: avoid repeated default interface lookups ... On some platforms (notably macOS and iOS) we look up the default interface to bind outgoing connections to. This is both duplicated work and results in logspam when the default interface is not available (i.e. when a phone has no connectivity, we log an error and thus cause more things that we will try to upload and fail). Fixed by passing around a netmon.Monitor to more places, so that we can use its cached interface state. Fixes #7850 Updates #7621 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Mihai Parparita	4722f7e322	all: move network monitoring from wgengine/monitor to net/netmon ... We're using it in more and more places, and it's not really specific to our use of Wireguard (and does more just link/interface monitoring). Also removes the separate interface we had for it in sockstats -- it's a small enough package (we already pull in all of its dependencies via other paths) that it's not worth the extra complexity. Updates #7621 Updates #7850 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Mihai Parparita	9a655a1d58	net/dnsfallback: more explicitly pass through logf function ... Redoes the approach from #5550 and #7539 to explicitly pass in the logf function, instead of having global state that can be overridden. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago