tailscale

Commit Graph

Author	SHA1	Message	Date
Brad Fitzpatrick	745931415c	health, all: remove health.Global, finish plumbing health.Tracker Updates #11874 Updates #4136 Change-Id: I414470f71d90be9889d44c3afd53956d9f26cd61 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	952e06aa46	wgengine/router: don't attempt route cleanup on Synology Trying to run iptables/nftables on Synology pauses for minutes with lots of errors and ultimately does nothing as it's not used and we lack permissions. This fixes a regression from `db760d0bac` (#11601) that landed between Synology testing on unstable 1.63.110 and 1.64.0 being cut. Fixes #11737 Change-Id: Iaf9563363b8e45319a9b6fe94c8d5ffaecc9ccef Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
James Tucker	db760d0bac	cmd/tailscaled: move cleanup to an implicit action during startup This removes a potentially increased boot delay for certain boot topologies where they block on ExecStartPre that may have socket activation dependencies on other system services (such as systemd-resolved and NetworkManager). Also rename cleanup to clean up in affected/immediately nearby places per code review commentary. Fixes #11599 Signed-off-by: James Tucker <james@tailscale.com>	8 months ago
Joonas Kuorilehto	fe0cfec4ad	wgengine/router: enable ip forwarding on gokrazy Only on Gokrazy, set sysctls to enable IP forwarding so subnet routing and advertised exit node works. Fixes #11405 Signed-off-by: Joonas Kuorilehto <joneskoo@derbian.fi>	8 months ago
Irbe Krumina	5fb721d4ad	util/linuxfw,wgengine/router: skip IPv6 firewall configuration in partial iptables mode (#11546 ) We have hosts that support IPv6, but not IPv6 firewall configuration in iptables mode. We also have hosts that have some support for IPv6 firewall configuration in iptables mode, but do not have iptables filter table. We should: - configure ip rules for all hosts that support IPv6 - only configure firewall rules in iptables mode if the host has iptables filter table. Updates tailscale/tailscale#11540 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
James Tucker	3f7313dbdb	util/linuxfw,wgengine/router: enable IPv6 configuration when netfilter is disabled Updates #11434 Signed-off-by: James Tucker <james@tailscale.com>	8 months ago
Jason Barnett	4d668416b8	wgengine/router: fix ip rule restoration Fixes #10857 Signed-off-by: Jason Barnett <J@sonBarnett.com>	9 months ago
Andrew Lytvynov	1302bd1181	all: cleanup unused code, part 1 (#10661 ) Run `staticcheck` with `U1000` to find unused code. This cleans up about a half of it. I'll do the other half separately to keep PRs manageable. Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	11 months ago
Naman Sood	d46a4eced5	util/linuxfw, wgengine: allow ingress to magicsock UDP port on Linux (#10370 ) * util/linuxfw, wgengine: allow ingress to magicsock UDP port on Linux Updates #9084. Currently, we have to tell users to manually open UDP ports on Linux when certain firewalls (like ufw) are enabled. This change automates the process of adding and updating those firewall rules as magicsock changes what port it listens on. Signed-off-by: Naman Sood <mail@nsood.in>	12 months ago
Naman Sood	0a59754eda	linuxfw,wgengine/route,ipn: add c2n and nodeattrs to control linux netfilter Updates tailscale/corp#14029. Signed-off-by: Naman Sood <mail@nsood.in>	12 months ago
James Tucker	215f657a5e	wgengine/router: create netfilter runner in setNetfilterMode This will enable the runner to be replaced as a configuration side effect in a later change. Updates tailscale/corp#14029 Signed-off-by: James Tucker <james@tailscale.com>	12 months ago
Maisem Ali	05a1f5bf71	util/linuxfw: move detection logic Just a refactor to consolidate the firewall detection logic in a single package so that it can be reused in a later commit by containerboot. Updates #9310 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
KevinLiang10	93cab56277	wgengine/router: fall back and set iptables as default again Due to the conflict between our nftables implementation and ufw, which is a common utility used on linux. We now want to take a step back to prevent regression. This will give us more chance to let users to test our nftables support and heuristic. Updates: #391 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
KevinLiang10	7ed3681cbe	tailcfg: Add FirewallMode to NetInfo to record wether host using iptables or nftables To record wether user is using iptables or nftables after we add support to nftables on linux, we are adding a field FirewallMode to NetInfo in HostInfo to reflect what firewall mode the host is running, and form metrics. The information is gained from a global constant in hostinfo.go. We set it when selection heuristic made the decision, and magicsock reports this to control. Updates: tailscale/corp#13943 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
Brad Fitzpatrick	25a8daf405	wgengine/router: always use nftables mode on gokrazy Updates gokrazy/gokrazy#209 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
KevinLiang10	411e3364a9	wgengine/router: use iptablesRunner when no firewall tool is available: The current router errors out when neither iptables nor nftables support is present. We should fall back to the previous behaviour which we creates a dummy iptablesRunner. Fixes: #8878 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
KevinLiang10	ae63c51ff1	wgengine/router: add auto selection heuristic for iptables/nftables This commit replaces the TS_DEBUG_USE_NETLINK_NFTABLES envknob with a TS_DEBUG_FIREWALL_MODE that should be set to either 'iptables' or 'nftables' to select firewall mode manually, other wise tailscaled will automatically choose between iptables and nftables depending on environment and system availability. updates: #319 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
KevinLiang10	a3c7b21cd1	util/linuxfw: add nftables support This commit adds nftable rule injection for tailscaled. If tailscaled is started with envknob TS_DEBUG_USE_NETLINK_NFTABLES = true, the router will use nftables to manage firewall rules. Updates: #391 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
KevinLiang10	243ce6ccc1	util/linuxfw: decoupling IPTables logic from linux router This change is introducing new netfilterRunner interface and moving iptables manipulation to a lower leveled iptables runner. For #391 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
Brad Fitzpatrick	a874f1afd8	all: adjust case of "IPv4" and "IPv6" Updates #docs Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Mihai Parparita	4722f7e322	all: move network monitoring from wgengine/monitor to net/netmon We're using it in more and more places, and it's not really specific to our use of Wireguard (and does more just link/interface monitoring). Also removes the separate interface we had for it in sockstats -- it's a small enough package (we already pull in all of its dependencies via other paths) that it's not worth the extra complexity. Updates #7621 Updates #7850 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
James Tucker	7b73c9628d	version/distro,wgengine/router: raise WSL eth0 MTU when too low WSL has started to set the eth0 default route interface default to 1280 MTU, which is too low to carry 1280 byte packets from tailscale0 once wrapped in WireGuard. The change down to 1280 is very likely smaller than necessary for almost all users. We can not easily determine the ideal MTU, but if all the preconditions match, we raise the MTU to 1360, which is just enough for Tailscale traffic to work. Updates #4833 Updates #7346 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Jordan Whited	ea5ee6f87c	all: update golang.zx2c4.com/wireguard to github.com/tailscale/wireguard-go (#6692 ) This is temporary while we work to upstream performance work in https://github.com/WireGuard/wireguard-go/pull/64. A replace directive is less ideal as it breaks dependent code without duplication of the directive. Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Maisem Ali	74637f2c15	wgengine/router: [linux] add before deleting interface addrs Deleting may temporarily result in no addrs on the interface, which results in all other rules (like routes) to get dropped by the OS. I verified this fixes the problem. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Josh Soref	d4811f11a0	all: fix spelling mistakes Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>	2 years ago
Tom DNetto	ab591906c8	wgengine/router: Increase range of rule priorities when detecting mwan3 Context: https://github.com/tailscale/tailscale/pull/5588#issuecomment-1260655929 It seems that if the interface at index 1 is down, the rule is not installed. As such, we increase the range we detect up to 2004 in the hope that at least one of the interfaces 1-4 will be up. Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Eng Zer Jun	f0347e841f	refactor: move from io/ioutil to io and os packages The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit replaces the existing io/ioutil functions with their new definitions in io and os packages. Reference: https://golang.org/doc/go1.16#ioutil Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>	2 years ago
Brad Fitzpatrick	74674b110d	envknob: support changing envknobs post-init Updates #5114 Change-Id: Ia423fc7486e1b3f3180a26308278be0086fae49b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Tom DNetto	f6da2220d3	wgengine: set fwmark masks in netfilter & ip rules This change masks the bitspace used when setting and querying the fwmark on packets. This allows tailscaled to play nicer with other networking software on the host, assuming the other networking software is also using fwmarks & a different mask. IPTables / mark module has always supported masks, so this is safe on the netfilter front. However, busybox only gained support for parsing + setting masks in 1.33.0, so we make sure we arent such a version before we add the "/<mask>" syntax to an ip rule command. Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Tom DNetto	ed2b8b3e1d	wgengine/router: reduce routing rule priority for openWRT + mwan3 Fixes #3659 Signed-off-by: Tom DNetto <tom@tailscale.com> Co-authored-by: Ian Foster <ian@vorsk.com>	2 years ago
Brad Fitzpatrick	4950fe60bd	syncs, all: move to using Go's new atomic types instead of ours Fixes #5185 Change-Id: I850dd532559af78c3895e2924f8237ccc328449d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	469c30c33b	ipn/localapi: define a cert dir for Synology DSM6 Fixes #4060 Change-Id: I5f145d4f56f6edb14825268e858d419c55918673 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	53588f632d	Revert "wgengine/router,util/kmod: load & log xt_mark" This reverts commit `8d6793fd70`. Reason: breaks Android build (cgo/pthreads addition) We can try again next cycle. Change-Id: I5e7e1730a8bf399a8acfce546a6d22e11fb835d5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
James Tucker	8d6793fd70	wgengine/router,util/kmod: load & log xt_mark Attempt to load the xt_mark kernel module when it is not present. If the load fails, log error information. It may be tempting to promote this failure to an error once it has been in use for some time, so as to avoid reaching an error with the iptables invocation, however, there are conditions under which the two stages may disagree - this change adds more useful breadcrumbs. Example new output from tailscaled running under my WSL2: ``` router: ensure module xt_mark: "/usr/sbin/modprobe xt_mark" failed: exit status 1; modprobe: FATAL: Module xt_mark not found in directory /lib/modules/5.10.43.3-microsoft-standard-WSL2 ``` Background: There are two places to lookup modules, one is `/proc/modules` "old", the other is `/sys/module/` "new". There was query_modules(2) in linux <2.6, alas, it is gone. In a docker container in the default configuration, you would get /proc/modules and /sys/module/ both populated. lsmod may work file, modprobe will fail with EPERM at `finit_module()` for an unpriviliged container. In a priviliged container the load may succeed, if some conditions are met. This condition should be avoided, but the code landing in this change does not attempt to avoid this scenario as it is both difficult to detect, and has a very uncertain impact. In an nspawn container `/proc/modules` is populated, but `/sys/module` does not exist. Modern `lsmod` versions will fail to gather most module information, without sysfs being populated with module information. In WSL2 modules are likely missing, as the in-use kernel typically is not provided by the distribution filesystem, and WSL does not mount in a module filesystem of its own. Notably the WSL2 kernel supports iptables marks without listing the xt_mark module in /sys/module, and /proc/modules is empty. On a recent kernel, we can ask the capabilities system about SYS_MODULE, that will help to disambiguate between the non-privileged container case and just being root. On older kernels these calls may fail. Update #4329 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Brad Fitzpatrick	0ce67ccda6	wgengine/router: make supportsV6NAT check catch more cases Updates #4459 Change-Id: Ic27621569d2739298e652769d10e38608c6012be Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	0868329936	all: use any instead of interface{} My favorite part of generics. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	26f27a620a	wgengine/router: delete legacy netfilter rule cleanup [Linux] This was just cleanup for an ancient version of Tailscale. Any such machines have upgraded since then. Change-Id: Iadcde05b37c2b867f92e02ec5d2b18bf2b8f653a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	41fd4eab5c	envknob: add new package for all the strconv.ParseBool(os.Getenv(..)) A new package can also later record/report which knobs are checked and set. It also makes the code cleaner & easier to grep for env knobs. Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	946dfec98a	wgengine/router: fix checkIPRuleSupportsV6 to actually use IPv6 Updates #3358 (should fix it) Updates #391 Change-Id: Ia62437dfa81247b0b5994d554cf279c3d540e4e7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	9259377a7f	wgengine/router: don't assume Linux was built with IP_MULTIPLE_TABLES Updates #3351 Updates #391 Change-Id: I7e66b686e05f3c970846513679cc62556ebe322a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	0350cf0438	wgengine{,/router}: annotate some more errors Updates #3351 Change-Id: I8b4f957d2051b3e29401bb449dbadbdada3a7c46 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d24ed3f68e	wgengine/router: add debug knob to resort to Linux "ip" command usage Tailscale 1.18 uses netlink instead of the "ip" command to program the Linux kernel. The old way was kept primarily for tests, but this also adds a TS_DEBUG_USE_IP_COMMAND environment knob to force the old way temporarily for debugging anybody who might have problems with the new way in 1.18. Updates #391 Change-Id: I0236fbfda6c9c05dcb3554fcc27ec0c86456efd9 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	3fd5f4380f	util/multierr: new package github.com/go-multierror/multierror served us well. But we need a few feature from it (implement Is), and it's not worth maintaining a fork of such a small module. Instead, I did a clean room implementation inspired by its API. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	408b0923a6	wgengine/router: remove last non-test "ip" command usage on Linux Updates #391 Change-Id: Ic2c3f8460b1e4b8d34b936a1725705fcc1effbae Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ff1954cfd9	wgengine/router: use netlink for ip rules on Linux Using temporary netlink fork in github.com/tailscale/netlink until we get the necessary changes upstream in either vishvananda/netlink or jsimonetti/rtnetlink. Updates #391 Change-Id: I6e1de96cf0750ccba53dabff670aca0c56dffb7c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	19189d7018	wgengine/router: add a addrFamily type [linux] In prep for more netlink-ification. Change-Id: I7c34a04001988107dc2583597aa4f26ddb887e91	3 years ago
Brad Fitzpatrick	7c40a5d440	wgengine/router: refactor in prep for Linux netlink-ification Pull out the list of policy routing rules to a data structure now shared between the add & delete paths, but to also be shared by the netlink paths in a future change. Updates #391 Change-Id: I119ab1c246f141d639006c808b61c585c3d67924 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago

1 2 3

118 Commits (19b31ac9a667dcf4eb905c86d45c0f1fa6ff751d)