tailscale

Commit Graph

Author	SHA1	Message	Date
Jordan Whited	7bc2ddaedc	go.mod,net/tstun,wgengine/netstack: implement gVisor TCP GSO for Linux (#12869 ) This commit implements TCP GSO for packets being read from gVisor on Linux. Windows support will follow later. The wireguard-go dependency is updated in order to make use of newly exported GSO logic from its tun package. A new gVisor stack.LinkEndpoint implementation has been established (linkEndpoint) that is loosely modeled after its predecessor (channel.Endpoint). This new implementation supports GSO of monster TCP segments up to 64K in size, whereas channel.Endpoint only supports up to 32K. linkEndpoint will also be required for GRO, which will be implemented in a follow-on commit. TCP throughput from gVisor, i.e. TUN read direction, is dramatically improved as a result of this commit. Benchmarks show substantial improvement through a wide range of RTT and loss conditions, sometimes as high as 5x. The iperf3 results below demonstrate the effect of this commit between two Linux computers with i5-12400 CPUs. There is roughly ~13us of round trip latency between them. The first result is from commit `57856fc` without TCP GSO. Starting Test: protocol: TCP, 1 streams, 131072 byte blocks - - - - - - - - - - - - - - - - - - - - - - - - - Test Complete. Summary Results: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 2.51 GBytes 2.15 Gbits/sec 154 sender [ 5] 0.00-10.00 sec 2.49 GBytes 2.14 Gbits/sec receiver The second result is from this commit with TCP GSO. Starting Test: protocol: TCP, 1 streams, 131072 byte blocks - - - - - - - - - - - - - - - - - - - - - - - - - Test Complete. Summary Results: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 12.6 GBytes 10.8 Gbits/sec 6 sender [ 5] 0.00-10.00 sec 12.6 GBytes 10.8 Gbits/sec receiver Updates #6816 Signed-off-by: Jordan Whited <jordan@tailscale.com>	3 months ago
Jonathan Nobels	8a8ecac6a7	net/dns, cmd/tailscaled: plumb system health tracker into dns cleanup (#12969 ) fixes tailscale#12968 The dns manager cleanup func was getting passed a nil health tracker, which will panic. Fixed to pass it the system health tracker. Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>	3 months ago
Irbe Krumina	a21bf100f3	cmd/k8s-operator,k8s-operator/sessionrecording,sessionrecording,ssh/tailssh: refactor session recording functionality (#12945 ) cmd/k8s-operator,k8s-operator/sessionrecording,sessionrecording,ssh/tailssh: refactor session recording functionality Refactor SSH session recording functionality (mostly the bits related to Kubernetes API server proxy 'kubectl exec' session recording): - move the session recording bits used by both Tailscale SSH and the Kubernetes API server proxy into a shared sessionrecording package, to avoid having the operator to import ssh/tailssh - move the Kubernetes API server proxy session recording functionality into a k8s-operator/sessionrecording package, add some abstractions in preparation for adding support for a second streaming protocol (WebSockets) Updates tailscale/corp#19821 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	3 months ago
Andrea Gottardo	90be06bd5b	health: introduce captive-portal-detected Warnable (#12707 ) Updates tailscale/tailscale#1634 This PR introduces a new `captive-portal-detected` Warnable which is set to an unhealthy state whenever a captive portal is detected on the local network, preventing Tailscale from connecting. ipn/ipnlocal: fix captive portal loop shutdown Change-Id: I7cafdbce68463a16260091bcec1741501a070c95 net/captivedetection: fix mutex misuse ipn/ipnlocal: ensure that we don't fail to start the timer Change-Id: I3e43fb19264d793e8707c5031c0898e48e3e7465 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	4 months ago
Nick Khyl	8bd442ba8c	util/winutil/gp, net/dns: add package for Group Policy API This adds a package with GP-related functions and types to be used in the future PRs. It also updates nrptRuleDatabase to use the new package instead of its own gpNotificationWatcher implementation. Updates #12687 Signed-off-by: Nick Khyl <nickk@tailscale.com>	4 months ago
Nick Khyl	e21d8768f9	types/opt: add generic Value[T any] for optional values of any types Updates #12736 Signed-off-by: Nick Khyl <nickk@tailscale.com>	4 months ago
Aaron Klotz	7dd76c3411	net/netns: add Windows support for bind-to-interface-by-route This is implemented via GetBestInterfaceEx. Should we encounter errors or fail to resolve a valid, non-Tailscale interface, we fall back to returning the index for the default interface instead. Fixes #12551 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	5 months ago
Andrew Dunham	24976b5bfd	cmd/tailscale/cli: actually perform Noise request in 'debug ts2021' This actually performs a Noise request in the 'debug ts2021' command, instead of just exiting once we've dialed a connection. This can help debug certain forms of captive portals and deep packet inspection that will allow a connection, but will RST the connection when trying to send data on the post-upgraded TCP connection. Updates #1634 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I1e46ca9c9a0751c55f16373a6a76cdc24fec1f18	5 months ago
Brad Fitzpatrick	86e0f9b912	net/ipset, wgengine/filter/filtertype: add split-out packages This moves NewContainsIPFunc from tsaddr to new ipset package. And wgengine/filter types gets split into wgengine/filter/filtertype, so netmap (and thus the CLI, etc) doesn't need to bring in ipset, bart, etc. Then add a test making sure the CLI deps don't regress. Updates #1278 Change-Id: Ia246d6d9502bbefbdeacc4aef1bed9c8b24f54d5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Nick Khyl	c32efd9118	various: create a catch-all NRPT rule when "Override local DNS" is enabled on Windows Without this rule, Windows 8.1 and newer devices issue parallel DNS requests to DNS servers associated with all network adapters, even when "Override local DNS" is enabled and/or a Mullvad exit node is being used, resulting in DNS leaks. This also adds "disable-local-dns-override-via-nrpt" nodeAttr that can be used to disable the new behavior if needed. Fixes tailscale/corp#20718 Signed-off-by: Nick Khyl <nickk@tailscale.com>	5 months ago
Aaron Klotz	bd2a6d5386	util/winutil: add UserProfile type for (un)loading user profiles S4U logons do not automatically load the associated user profile. In this PR we add UserProfile to handle that part. Windows docs indicate that we should try to resolve a remote profile path when present, so we attempt to do so when the local computer is joined to a domain. Updates #12383 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	5 months ago
Aaron Klotz	3511d1f8a2	cmd/tailscaled, net/dns, wgengine/router: start Windows child processes with DETACHED_PROCESS when I/O is being piped When we're starting child processes on Windows that are CLI programs that don't need to output to a console, we should pass in DETACHED_PROCESS as a CreationFlag on SysProcAttr. This prevents the OS from even creating a console for the child (and paying the associated time/space penalty for new conhost processes). This is more efficient than letting the OS create the console window and then subsequently trying to hide it, which we were doing at a few callsites. Fixes #12270 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	5 months ago
Maisem Ali	36e8e8cd64	wgengine/magicsock: use math/rands/v2 Updates #11058 Co-authored-by: James Tucker <james@tailscale.com> Signed-off-by: Maisem Ali <maisem@tailscale.com>	5 months ago
Maisem Ali	4a8cb1d9f3	all: use math/rand/v2 more Updates #11058 Signed-off-by: Maisem Ali <maisem@tailscale.com>	5 months ago
Maisem Ali	42cfbf427c	tsnet,wgengine/netstack: add ListenPacket and tests This adds a new ListenPacket function on tsnet.Server which acts mostly like `net.ListenPacket`. Unlike `Server.Listen`, this requires listening on a specific IP and does not automatically listen on both V4 and V6 addresses of the Server when the IP is unspecified. To test this, it also adds UDP support to tsdial.Dialer.UserDial and plumbs it through the localapi. Then an associated test to make sure the UDP functionality works from both sides. Updates #12182 Signed-off-by: Maisem Ali <maisem@tailscale.com>	5 months ago
Brad Fitzpatrick	1ea100e2e5	cmd/tailscaled, ipn/conffile: support ec2 user-data config file Updates #1412 Updates #1866 Change-Id: I4d08fb233b80c2078b3b28ffc18559baabb4a081 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Maisem Ali	9a64c06a20	all: do not depend on the testing package Discovered while looking for something else. Updates tailscale/corp#18935 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Andrea Gottardo	e5f67f90a2	xcode: allow ICMP ping relay on macOS + iOS platforms (#12048 ) Fixes tailscale/tailscale#10393 Fixes tailscale/corp#15412 Fixes tailscale/corp#19808 On Apple platforms, exit nodes and subnet routers have been unable to relay pings from Tailscale devices to non-Tailscale devices due to sandbox restrictions imposed on our network extensions by Apple. The sandbox prevented the code in netstack.go from spawning the `ping` process which we were using. Replace that exec call with logic to send an ICMP echo request directly, which appears to work in userspace, and not trigger a sandbox violation in the syslog. Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	6 months ago
Brad Fitzpatrick	727c0d6cfd	ipn/ipnserver: close a small race in ipnserver, ~simplify code There was a small window in ipnserver after we assigned a LocalBackend to the ipnserver's atomic but before we Start'ed it where our initalization Start could conflict with API calls from the LocalAPI. Simplify that a bit and lay out the rules in the docs. Updates #12028 Change-Id: Ic5f5e4861e26340599184e20e308e709edec68b1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Nick Khyl	caa3d7594f	ipn/ipnlocal, net/tsdial: plumb routes into tsdial and use them in UserDial We'd like to use tsdial.Dialer.UserDial instead of SystemDial for DNS over TCP. This is primarily necessary to properly dial internal DNS servers accessible over Tailscale and subnet routes. However, to avoid issues when switching between Wi-Fi and cellular, we need to ensure that we don't retain connections to any external addresses on the old interface. Therefore, we need to determine which dialer to use internally based on the configured routes. This plumbs routes and localRoutes from router.Config to tsdial.Dialer, and updates UserDial to use either the peer dialer or the system dialer, depending on the network address and the configured routes. Updates tailscale/corp#18725 Fixes #4529 Signed-off-by: Nick Khyl <nickk@tailscale.com>	6 months ago
Andrew Lytvynov	ce5c80d0fe	clientupdate: exec systemctl instead of using dbus to restart (#11923 ) Shell out to "systemctl", which lets us drop an extra dependency. Updates https://github.com/tailscale/corp/issues/18935 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	7 months ago
Brad Fitzpatrick	b9adbe2002	net/{interfaces,netmon}, all: merge net/interfaces package into net/netmon In prep for most of the package funcs in net/interfaces to become methods in a long-lived netmon.Monitor that can cache things. (Many of the funcs are very heavy to call regularly, whereas the long-lived netmon.Monitor can subscribe to things from the OS and remember answers to questions it's asked regularly later) Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	6b95219e3a	net/netmon, add: add netmon.State type alias of interfaces.State ... in prep for merging the net/interfaces package into net/netmon. This is a no-op change that updates a bunch of the API signatures ahead of a future change to actually move things (and remove the type alias) Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I477613388f09389214db0d77ccf24a65bff2199c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	3672f29a4e	net/netns, net/dns/resolver, etc: make netmon required in most places The goal is to move more network state accessors to netmon.Monitor where they can be cheaper/cached. But first (this change and others) we need to make sure the one netmon.Monitor is plumbed everywhere. Some notable bits: * tsdial.NewDialer is added, taking a now-required netmon * because a tsdial.Dialer always has a netmon, anything taking both a Dialer and a NetMon is now redundant; take only the Dialer and get the NetMon from that if/when needed. * netmon.NewStatic is added, primarily for tests Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	745931415c	health, all: remove health.Global, finish plumbing health.Tracker Updates #11874 Updates #4136 Change-Id: I414470f71d90be9889d44c3afd53956d9f26cd61 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	6d69fc137f	ipn/{ipnlocal,localapi},wgengine{,/magicsock}: plumb health.Tracker Down to 25 health.Global users. After this remains controlclient & net/dns & wgengine/router. Updates #11874 Updates #4136 Change-Id: I6dd1856e3d9bf523bdd44b60fb3b8f7501d5dc0d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	723c775dbb	tsd, ipnlocal, etc: add tsd.System.HealthTracker, start some plumbing This adds a health.Tracker to tsd.System, accessible via a new tsd.System.HealthTracker method. In the future, that new method will return a tsd.System-specific HealthTracker, so multiple tsnet.Servers in the same process are isolated. For now, though, it just always returns the temporary health.Global value. That permits incremental plumbing over a number of changes. When the second to last health.Global reference is gone, then the tsd.System.HealthTracker implementation can return a private Tracker. The primary plumbing this does is adding it to LocalBackend and its dozen and change health calls. A few misc other callers are also plumbed. Subsequent changes will flesh out other parts of the tree (magicsock, controlclient, etc). Updates #11874 Updates #4136 Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Joe Tsai	63b3c82587	ipn/local: log OS-specific diagnostic information as JSON (#11700 ) There is an undocumented 16KiB limit for text log messages. However, the limit for JSON messages is 256KiB. Even worse, logging JSON as text results in significant overhead since each double quote needs to be escaped. Instead, use logger.Logf.JSON to explicitly log the info as JSON. We also modify osdiag to return the information as structured data rather than implicitly have the package log on our behalf. This gives more control to the caller on how to log. Updates #7802 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	7 months ago
Aaron Klotz	7132b782d4	hostinfo: use Distro field for distinguishing Windows Server builds Some editions of Windows server share the same build number as their client counterpart; we must use an additional field found in the OS version information to distinguish between them. Even though "Distro" has Linux connotations, it is the most appropriate hostinfo field. What is Windows Server if not an alternate distribution of Windows? This PR populates Distro with "Server" when applicable. Fixes #11785 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	7 months ago
Claire Wang	9171b217ba	cmd/tailscale, ipn/ipnlocal: add suggest exit node CLI option (#11407 ) Updates tailscale/corp#17516 Signed-off-by: Claire Wang <claire@tailscale.com>	7 months ago
Brad Fitzpatrick	a1abd12f35	cmd/tailscaled, net/tstun: build for aix/ppc64 At least in userspace-networking mode. Fixes #11361 Change-Id: I78d33f0f7e05fe9e9ee95b97c99b593f8fe498f2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Joe Tsai	7a77a2edf1	logtail: optimize JSON processing (#11671 ) Changes made: * Avoid "encoding/json" for JSON processing, and instead use "github.com/go-json-experiment/json/jsontext". Use jsontext.Value.IsValid for validation, which is much faster. Use jsontext.AppendQuote instead of our own JSON escaping. * In drainPending, use a different maxLen depending on lowMem. In lowMem mode, it is better to perform multiple uploads than it is to construct a large body that OOMs the process. * In drainPending, if an error is encountered draining, construct an error message in the logtail JSON format rather than something that is invalid JSON. * In appendTextOrJSONLocked, use jsontext.Decoder to check whether the input is a valid JSON object. This is faster than the previous approach of unmarshaling into map[string]any and then re-marshaling that data structure. This is especially beneficial for network flow logging, which produces relatively large JSON objects. * In appendTextOrJSONLocked, enforce maxSize on the input. If too large, then we may end up in a situation where the logs can never be uploaded because it exceeds the maximum body size that the Tailscale logs service accepts. * Use "tailscale.com/util/truncate" to properly truncate a string on valid UTF-8 boundaries. * In general, remove unnecessary spaces in JSON output. Performance: name old time/op new time/op delta WriteText 776ns ± 2% 596ns ± 1% -23.24% (p=0.000 n=10+10) WriteJSON 110µs ± 0% 9µs ± 0% -91.77% (p=0.000 n=8+8) name old alloc/op new alloc/op delta WriteText 448B ± 0% 0B -100.00% (p=0.000 n=10+10) WriteJSON 37.9kB ± 0% 0.0kB ± 0% -99.87% (p=0.000 n=10+10) name old allocs/op new allocs/op delta WriteText 1.00 ± 0% 0.00 -100.00% (p=0.000 n=10+10) WriteJSON 1.08k ± 0% 0.00k ± 0% -99.91% (p=0.000 n=10+10) For text payloads, this is 1.30x faster. For JSON payloads, this is 12.2x faster. Updates #cleanup Updates tailscale/corp#18514 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	7 months ago
James Tucker	db760d0bac	cmd/tailscaled: move cleanup to an implicit action during startup This removes a potentially increased boot delay for certain boot topologies where they block on ExecStartPre that may have socket activation dependencies on other system services (such as systemd-resolved and NetworkManager). Also rename cleanup to clean up in affected/immediately nearby places per code review commentary. Fixes #11599 Signed-off-by: James Tucker <james@tailscale.com>	7 months ago
Maisem Ali	3f4c5daa15	wgengine/netstack: remove SubnetRouterWrapper It was used when we only supported subnet routers on linux and would nil out the SubnetRoutes slice as no other router worked with it, but now we support subnet routers on ~all platforms. The field it was setting to nil is now only used for network logging and nowhere else, so keep the field but drop the SubnetRouterWrapper as it's not useful. Updates #cleanup Change-Id: Id03f9b6ec33e47ad643e7b66e07911945f25db79 Signed-off-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Charlotte Brandhorst-Satzkorn	98cf71cd73	tailscale: switch tailfs to drive syntax for api and logs (#11625 ) This change switches the api to /drive, rather than the previous /tailfs as well as updates the log lines to reflect the new value. It also cleans up some existing tailfs references. Updates tailscale/corp#16827 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	7 months ago
Charlotte Brandhorst-Satzkorn	93618a3518	tailscale: update tailfs functions and vars to use drive naming (#11597 ) This change updates all tailfs functions and the majority of the tailfs variables to use the new drive naming. Updates tailscale/corp#16827 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	7 months ago
Charlotte Brandhorst-Satzkorn	14683371ee	tailscale: update tailfs file and package names (#11590 ) This change updates the tailfs file and package names to their new naming convention. Updates #tailscale/corp#16827 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	7 months ago
Percy Wegmann	66e4d843c1	ipn/localapi: add support for multipart POST to file-put This allows sending multiple files via Taildrop in one request. Progress is tracked via ipn.Notify. Updates tailscale/corp#18202 Signed-off-by: Percy Wegmann <percy@tailscale.com>	8 months ago
Percy Wegmann	8b8b315258	net/tstun: use gaissmai/bart instead of tempfork/device This implementation uses less memory than tempfork/device, which helps avoid OOM conditions in the iOS VPN extension when switching to a Tailnet with ExitNode routing enabled. Updates tailscale/corp#18514 Signed-off-by: Percy Wegmann <percy@tailscale.com>	8 months ago
Joe Tsai	85febda86d	all: use zstdframe where sensible (#11491 ) Use the zstdframe package where sensible instead of plumbing around our own zstd.Encoder just for stateless operations. This causes logtail to have a dependency on zstd, but that's arguably okay since zstd support is implicit to the protocol between a client and the logging service. Also, virtually every caller to logger.NewLogger was manually setting up a zstd.Encoder anyways, meaning that zstd was functionally always a dependency. Updates #cleanup Updates tailscale/corp#18514 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	8 months ago
Brad Fitzpatrick	69f4b4595a	wgengine{,/wgint}: add wgint.Peer wrapper type, add to wgengine.Engine This adds a method to wgengine.Engine and plumbed down into magicsock to add a way to get a type-safe Tailscale-safe wrapper around a wireguard-go device.Peer that only exposes methods that are safe for Tailscale to use internally. It also removes HandshakeAttempts from PeerStatusLite that was just added as it wasn't needed yet and is now accessible ala cart as needed from the Peer type accessor. None of this is used yet. Updates #7617 Change-Id: I07be0c4e6679883e6eeddf8dbed7394c9e79c5f4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Nick Khyl	7ef1fb113d	cmd/tailscaled, ipn/ipnlocal, wgengine: shutdown tailscaled if wgdevice is closed Tailscaled becomes inoperative if the Tailscale Tunnel wintun adapter is abruptly removed. wireguard-go closes the device in case of a read error, but tailscaled keeps running. This adds detection of a closed WireGuard device, triggering a graceful shutdown of tailscaled. It is then restarted by the tailscaled watchdog service process. Fixes #11222 Signed-off-by: Nick Khyl <nickk@tailscale.com>	9 months ago
Percy Wegmann	50fb8b9123	tailfs: replace webdavfs with reverse proxies Instead of modeling remote WebDAV servers as actual webdav.FS instances, we now just proxy traffic to them. This not only simplifies the code, but it also allows WebDAV locking to work correctly by making sure locks are handled by the servers that need to (i.e. the ones actually serving the files). Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Andrew Dunham	52f16b5d10	doctor/ethtool, ipn/ipnlocal: add ethtool bugreport check Updates #11137 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Idbe862d80e428adb044249c47d9096b87f29d5d8	9 months ago
Brad Fitzpatrick	61a1644c2a	go.mod, all: move away from inet.af domain seized by Taliban Updates inetaf/tcpproxy#39 Change-Id: I7fee276b116bd08397347c6c949011d76a2842cf Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Percy Wegmann	55b372a79f	tailscaled: revert to using pointers for subcommands As part of #10631, we stopped using function pointers for subcommands, preventing us from registering platform-specific installSystemDaemon and uninstallSystemDaemon subcommands. Fixes #11099 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Percy Wegmann	87154a2f88	tailfs: fix startup issues on windows Starts TailFS for Windows too, initializes shares on startup. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Percy Wegmann	abab0d4197	tailfs: clean up naming and package structure - Restyles tailfs -> tailFS - Defines interfaces for main TailFS types - Moves implemenatation of TailFS into tailfsimpl package Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
James Tucker	24bac27632	util/rands: add Shuffle and Perm functions with on-stack RNG state The new math/rand/v2 package includes an m-local global random number generator that can not be reseeded by the user, which is suitable for most uses without the RNG pools we have in a number of areas of the code base. The new API still does not have an allocation-free way of performing a seeded operations, due to the long term compiler bug around interface parameter escapes, and the Source interface. This change introduces the two APIs that math/rand/v2 can not yet replace efficiently: seeded Perm() and Shuffle() operations. This implementation chooses to use the PCG random source from math/rand/v2, as with sufficient compiler optimization, this source should boil down to only two on-stack registers for random state under ideal conditions. Updates #17243 Signed-off-by: James Tucker <james@tailscale.com>	9 months ago
Percy Wegmann	993acf4475	tailfs: initial implementation Add a WebDAV-based folder sharing mechanism that is exposed to local clients at 100.100.100.100:8080 and to remote peers via a new peerapi endpoint at /v0/tailfs. Add the ability to manage folder sharing via the new 'share' CLI sub-command. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago

1 2 3 4 5 ...

616 Commits (0def4f8e38c6cf8f2f2004607de4fef6b7dcb79c)