Commit Graph

982 Commits (048cb61dd07ec2bbf7fafb28a605fce5dd61234d)

Author SHA1 Message Date
Denton Gentry 137e9f4c46 net/portmap: add test of Mikrotik Root Desc XML.
Unfortunately in the test we can't reproduce the failure seen
in the real system ("SOAP fault: UPnPError")

Updates https://github.com/tailscale/tailscale/issues/8364

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
12 months ago
Andrew Dunham c4ccdd1bd1 net/interfaces: ensure we return valid 'self' IP in LikelyHomeRouterIP
Before this fix, LikelyHomeRouterIP could return a 'self' IP that
doesn't correspond to the gateway address, since it picks the first
private address when iterating over the set interfaces as the 'self' IP,
without checking that the address corresponds with the
previously-detected gateway.

This behaviour was introduced by accident in aaf2df7, where we deleted
the following code:

    for _, prefix := range privatev4s {
        if prefix.Contains(gateway) && prefix.Contains(ip) {
            myIP = ip
            ok = true
            return
        }
    }

Other than checking that 'gateway' and 'ip' were private IP addresses
(which were correctly replaced with a call to the netip.Addr.IsPrivate
method), it also implicitly checked that both 'gateway' and 'ip' were a
part of the *same* prefix, and thus likely to be the same interface.

Restore that behaviour by explicitly checking pfx.Contains(gateway),
which, given that the 'ip' variable is derived from our prefix 'pfx',
ensures that the 'self' IP will correspond to the returned 'gateway'.

Fixes #10466

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Iddd2ee70cefb9fb40071986fefeace9ca2441ee6
12 months ago
Aaron Klotz 64a26b221b net/dns: use an additional registry setting to disable dynamic DNS updates for our interface on Windows
Fixes #9775

Signed-off-by: Aaron Klotz <aaron@tailscale.com>
1 year ago
Juergen Knaack c27aa9e7ff net/dns: fix darwin dns resolver files
putting each nameserver on one line in /etc/resolver/<domain>

fixes: #10134
Signed-off-by: Juergen Knaack <jk@jk-1.de>
1 year ago
Ryan Petris c4855fe0ea Fix Empty Resolver Set
Config.singleResolverSet returns true if all routes have the same resolvers,
even if the routes have no resolvers. If none of the routes have a specific
resolver, the default should be used instead. Therefore, check for more than
0 instead of nil.

Signed-off-by: Ryan Petris <ryan@petris.net>
1 year ago
Andrew Dunham e33bc64cff net/dnsfallback: add singleflight to recursive resolver
This prevents running more than one recursive resolution for the same
hostname in parallel, which can use excessive amounts of CPU when called
in a tight loop. Additionally, add tests that hit the network (when
run with a flag) to test the lookup behaviour.

Updates tailscale/corp#15261

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I39351e1d2a8782dd4c52cb04b3bd982eb651c81e
1 year ago
Jordan Whited 12d5c99b04
client/tailscale,ipn/{ipnlocal,localapi}: check UDP GRO config (#10071)
Updates tailscale/corp#9990

Signed-off-by: Jordan Whited <jordan@tailscale.com>
1 year ago
James Tucker b48b7d82d0 appc,ipn/ipnlocal,net/dns/resolver: add App Connector wiring when enabled in prefs
An EmbeddedAppConnector is added that when configured observes DNS
responses from the PeerAPI. If a response is found matching a configured
domain, routes are advertised when necessary.

The wiring from a configuration in the netmap capmap is not yet done, so
while the connector can be enabled, no domains can yet be added.

Updates tailscale/corp#15437

Signed-off-by: James Tucker <james@tailscale.com>
1 year ago
James Tucker 09fcbae900 net/dnscache: remove completed TODO
The other IP types don't appear to be imported anymore, and after a scan
through I couldn't see any substantial usage of other representations,
so I think this TODO is complete.

Updates #cleanup
Signed-off-by: James Tucker <james@tailscale.com>
1 year ago
Andrew Dunham 57c5b5a77e net/dns/recursive: update IP for b.root-servers.net
As of 2023-11-27, the official IP addresses for b.root-servers.net will
change to a new set, with the older IP addresses supported for at least
a year after that date. These IPs are already active and returning
results, so update these in our recursive DNS resolver package so as to
be ready for the switchover.

See: https://b.root-servers.org/news/2023/05/16/new-addresses.html

Fixes #9994

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I29e2fe9f019163c9ec0e62bdb286e124aa90a487
1 year ago
Andrew Dunham ef596aed9b net/portmapper: avoid alloc in getUPnPErrorsMetric
Updates #cleanup

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Iea558024c038face24cc46584421998d10f13a66
1 year ago
Val 19e5f242e0 net/portmapper: convert UPnP metrics to new syncs.Map.LoadOrInit method
Simplify UPnP error metrics by using the new syncs.Map.LoadOrInit method.

Updates #cleanup

Signed-off-by: Val <valerie@tailscale.com>
1 year ago
Brad Fitzpatrick 95faefd1f6 net/dnsfallback: disable recursive resolver for now
It seems to be implicated in a CPU consumption bug that's not yet
understood. Disable it until we understand.

Updates tailscale/corp#15261

Change-Id: Ia6d0c310da6464dda79a70fc3c18be0782812d3f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Denton Gentry 97ee3891f1 net/dns: use direct when NetworkManager has no systemd-resolved
Endeavour OS, at least, uses NetworkManager 1.44.2 and does
not use systemd-resolved behind the scenes at all. If we
find ourselves in that situation, return "direct" not
"systemd-resolved"

Fixes https://github.com/tailscale/tailscale/issues/9687

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
1 year ago
Maisem Ali 5297bd2cff cmd/tailscaled,net/tstun: fix data race on start-up in TUN mode
Fixes #7894

Change-Id: Ice3f8019405714dd69d02bc07694f3872bb598b8

Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
1 year ago
Maisem Ali 9d96e05267 net/packet: split off checksum munging into different pkg
The current structure meant that we were embedding netstack in
the tailscale CLI and in the GUIs. This removes that by isolating
the checksum munging to a different pkg which is only called from
`net/tstun`.

Fixes #9756

Signed-off-by: Maisem Ali <maisem@tailscale.com>
1 year ago
Galen Guyer 04a8b8bb8e net/dns: properly detect newer debian resolvconf
Tailscale attempts to determine if resolvconf or openresolv
is in use by running `resolvconf --version`, under the assumption
this command will error when run with Debian's resolvconf. This
assumption is no longer true and leads to the wrong commands being
run on newer versions of Debian with resolvconf >= 1.90. We can
now check if the returned version string starts with "Debian resolvconf"
if the command is successful.

Fixes #9218

Signed-off-by: Galen Guyer <galen@galenguyer.com>
1 year ago
Maisem Ali 78a083e144 types/ipproto: drop IPProto from IPProtoVersion
Based on https://github.com/golang/go/wiki/CodeReviewComments#package-names.

Updates #cleanup

Signed-off-by: Maisem Ali <maisem@tailscale.com>
1 year ago
Val 893bdd729c disco,net/tstun,wgengine/magicsock: probe peer MTU
Automatically probe the path MTU to a peer when peer MTU is enabled, but do not
use the MTU information for anything yet.

Updates #311

Signed-off-by: Val <valerie@tailscale.com>
1 year ago
Brad Fitzpatrick 7868393200 net/dns/resolver, ipnlocal: fix ExitDNS on Android and iOS
Advertise it on Android (it looks like it already works once advertised).

And both advertise & likely fix it on iOS. Yet untested.

Updates #9672

Change-Id: If3b7e97f011dea61e7e75aff23dcc178b6cf9123
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Tom DNetto da1b917575 net/tstun: finish wiring IPv6 NAT support
Updates https://github.com/tailscale/corp/issues/11202
Updates ENG-991
Signed-off-by: Tom DNetto <tom@tailscale.com>
1 year ago
Andrew Dunham 91b9899402 net/dns/resolver: fix flaky test
Updates #cleanup

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I2d073220bb6ac78ba88d8be35085cc23b727d69f
1 year ago
Andrew Dunham 286c6ce27c
net/dns/resolver: race UDP and TCP queries (#9544)
Instead of just falling back to making a TCP query to an upstream DNS
server when the UDP query returns a truncated query, also start a TCP
query in parallel with the UDP query after a given race timeout. This
ensures that if the upstream DNS server does not reply over UDP (or if
the response packet is blocked, or there's an error), we can still make
queries if the server replies to TCP queries.

This also adds a new package, util/race, to contain the logic required for
racing two different functions and returning the first non-error answer.

Updates tailscale/corp#14809

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4311702016c1093b1beaa31b135da1def6d86316
1 year ago
Tom DNetto 656a77ab4e net/packet: implement methods for rewriting v6 addresses
Implements the ability for the address-rewriting code to support rewriting IPv6 addresses.

Specifically, UpdateSrcAddr & UpdateDstAddr.

Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates https://github.com/tailscale/corp/issues/11202
1 year ago
Val c26d91d6bd net/tstun: remove unused function DefaultMTU()
Now that corp is updated, remove the shim code to bridge the rename from
DefaultMTU() to DefaultTUNMTU.

Updates #311

Signed-off-by: Val <valerie@tailscale.com>
1 year ago
James Tucker e03f0d5f5c net/dnsfallback: remove net/dnsfallback go:generate line
We should be able to freely run `./tool/go generate ./...`, but we're
continually dodging this particular generator. Instead of constantly
dodging it, let's just remove it.

Updates #cleanup
Signed-off-by: James Tucker <james@tailscale.com>
1 year ago
James Tucker 84acf83019 go.mod,net/dnsfallback: bump go4.org/netipx
Updates #8043
Signed-off-by: James Tucker <james@tailscale.com>
1 year ago
Andrea Barisani b5b4298325 go.mod,*: bump gvisor
Updates #9253

Signed-off-by: Andrea Barisani <andrea@inversepath.com>
Signed-off-by: James Tucker <james@tailscale.com>
1 year ago
Andrew Dunham d31460f793 net/portmapper: fix invalid UPnP metric name
Fixes #9551

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I06f3a15a668be621675be6cbc7e5bdcc006e8570
1 year ago
Val c608660d12 wgengine,net,ipn,disco: split up and define different types of MTU
Prepare for path MTU discovery by splitting up the concept of
DefaultMTU() into the concepts of the Tailscale TUN MTU, MTUs of
underlying network interfaces, minimum "safe" TUN MTU, user configured
TUN MTU, probed path MTU to a peer, and maximum probed MTU. Add a set
of likely MTUs to probe.

Updates #311

Signed-off-by: Val <valerie@tailscale.com>
1 year ago
Andrew Dunham 530aaa52f1 net/dns: retry forwarder requests over TCP
We weren't correctly retrying truncated requests to an upstream DNS
server with TCP. Instead, we'd return a truncated request to the user,
even if the user was querying us over TCP and thus able to handle a
large response.

Also, add an envknob and controlknob to allow users/us to disable this
behaviour if it turns out to be buggy ( DNS ).

Updates #9264

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ifb04b563839a9614c0ba03e9c564e8924c1a2bfd
1 year ago
Brad Fitzpatrick 241c983920 net/tstun: use untyped consts, simplify DefaultMTU func
Updates #cleanup

Change-Id: Ic9ad1d6134818699f777c66a31024e846dfdc5d4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Brad Fitzpatrick 3b32d6c679 wgengine/magicsock, controlclient, net/dns: reduce some logspam
Updates #cleanup

Change-Id: I78b0697a01e94baa33f3de474b591e616fa5e6af
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Val 6cc5b272d8 Revert "wgengine,net,ipn,disco: split up and define different types of MTU"
This reverts commit 059051c58a.

Signed-off-by: Val <valerie@tailscale.com>
1 year ago
Val 059051c58a wgengine,net,ipn,disco: split up and define different types of MTU
Prepare for path MTU discovery by splitting up the concept of
DefaultMTU() into the concepts of the Tailscale TUN MTU, MTUs of
underlying network interfaces, minimum "safe" TUN MTU, user configured
TUN MTU, probed path MTU to a peer, and maximum probed MTU. Add a set
of likely MTUs to probe.

Updates #311

Signed-off-by: Val <valerie@tailscale.com>
1 year ago
James Tucker 1c88a77f68 net/dns/publicdns: update Quad9 addresses and references
One Quad9 IPv6 address was incorrect, and an additional group needed
adding. Additionally I checked Cloudflare and included source reference
URLs for both.

Updates #cleanup
Signed-off-by: James Tucker <james@tailscale.com>
1 year ago
Maisem Ali 3056a98bbd net/tstun: add better logging of natV4Config
It might as well have been spewing out gibberish. This adds
a nicer output format for us to be able to read and identify
whats going on.

Sample output
```
natV4Config{nativeAddr: 100.83.114.95, listenAddrs: [10.32.80.33], dstMasqAddrs: [10.32.80.33: 407 peers]}
```

Fixes tailscale/corp#14650

Signed-off-by: Maisem Ali <maisem@tailscale.com>
1 year ago
Tom DNetto c08cf2a9c6 all: declare & plumb IPv6 masquerade address for peer
This PR plumbs through awareness of an IPv6 SNAT/masquerade address from the wire protocol
through to the low-level (tstun / wgengine). This PR is the first in two PRs for implementing
IPv6 NAT support to/from peers.

A subsequent PR will implement the data-plane changes to implement IPv6 NAT - this is just plumbing.

Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates ENG-991
1 year ago
Andrew Dunham d9ae7d670e net/portmapper: add clientmetric for UPnP error codes
This should allow us to gather a bit more information about errors that
we encounter when creating UPnP mappings. Since we don't have a
"LabelMap" construction for clientmetrics, do what sockstats does and
lazily register a new metric when we see a new code.

Updates #9343

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ibb5aadd6138beb58721f98123debcc7273b611ba
1 year ago
Brad Fitzpatrick 0d991249e1 types/netmap: remove NetworkMap.{Addresses,MachineStatus}
And convert all callers over to the methods that check SelfNode.

Now we don't have multiple ways to express things in tests (setting
fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't
have multiple ways to check those two fields (often only checking one
or the other).

Updates #9443

Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Brad Fitzpatrick 926c990a09 types/netmap: start phasing out Addresses, add GetAddresses method
NetworkMap.Addresses is redundant with the SelfNode.Addresses. This
works towards a TODO to delete NetworkMap.Addresses and replace it
with a method.

This is similar to #9389.

Updates #cleanup

Change-Id: Id000509ca5d16bb636401763d41bdb5f38513ba0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
James Tucker 8ab46952d4 net/ping: fix ICMP echo code field to 0
The code was trying to pass the ICMP protocol number here (1), which is
not a valid code. Many servers will not respond to echo messages with
codes other than 0.

https://www.iana.org/assignments/icmp-parameters/icmp-parameters.xhtml#icmp-parameters-codes-8

Updates #9299
Signed-off-by: James Tucker <james@tailscale.com>
1 year ago
James Tucker 4c693d2ee8 net/dns/publicdns: update Mullvad DoH server list
The following IPs are not used anymore: 193.19.108.2 and 193.19.108.3.
All of the servers are now named consistently under dns.mullvad.net.
Several new servers were added.

https://mullvad.net/en/help/dns-over-https-and-dns-over-tls/

Updates #5416
Updates #9345

Signed-off-by: James Tucker <james@tailscale.com>
1 year ago
Andrew Dunham ad4c11aca1 net/netmon: log when the gateway/self IP changes
This logs that the gateway/self IP address has changed if one of the new
values differs.

Updates #8992

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I0919424b68ad97fbe1204dd36317ed6f5915411f
1 year ago
Andrew Dunham 9ee173c256 net/portmapper: fall back to permanent UPnP leases if necessary
Some routers don't support lease times for UPnP portmapping; let's fall
back to adding a permanent lease in these cases. Additionally, add a
proper end-to-end test case for the UPnP portmapping behaviour.

Updates #9343

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I17dec600b0595a5bfc9b4d530aff6ee3109a8b12
1 year ago
Brad Fitzpatrick 4e91cf20a8 control/controlknobs, all: add plumbed Knobs type, not global variables
Previously two tsnet nodes in the same process couldn't have disjoint
sets of controlknob settings from control as both would overwrite each
other's global variables.

This plumbs a new controlknobs.Knobs type around everywhere and hangs
the knobs sent by control on that instead.

Updates #9351

Change-Id: I75338646d36813ed971b4ffad6f9a8b41ec91560
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Brad Fitzpatrick dc7aa98b76 all: use set.Set consistently instead of map[T]struct{}
I didn't clean up the more idiomatic map[T]bool with true values, at
least yet.  I just converted the relatively awkward struct{}-valued
maps.

Updates #cleanup

Change-Id: I758abebd2bb1f64bc7a9d0f25c32298f4679c14f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Andrew Dunham d413dd7ee5 net/dns/publicdns: add support for Wikimedia DNS
RELNOTE=Adds support for Wikimedia DNS

Updates #9255

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4213c29e0f91ea5aa0304a5a026c32b6690fead9
1 year ago
Brad Fitzpatrick 1262df0578 net/netmon, net/tsdial: add some link change metrics
Updates #9040

Change-Id: I2c87572d79d2118bcf1f0122eccfe712c1bea9d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Brad Fitzpatrick 8b3ea13af0 net/tsdial: be smarter about when to close SystemDial conns
It was too aggressive before, as it only had the ill-defined "Major"
bool to work with. Now it can check more precisely.

Updates #9040

Change-Id: I20967283b64af6a9cad3f8e90cff406de91653b8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Andrea Barisani 0a74d46568 adjust build tags for tamago
Signed-off-by: Andrea Barisani <andrea@inversepath.com>
1 year ago
David Anderson 8b492b4121 net/wsconn: accept a remote addr string and plumb it through
This makes wsconn.Conns somewhat present reasonably when they are
the client of an http.Request, rather than just put a placeholder
in that field.

Updates tailscale/corp#13777

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
Brad Fitzpatrick 11ece02f52 net/{interfaces,netmon}: remove "interesting", EqualFiltered API
This removes a lot of API from net/interfaces (including all the
filter types, EqualFiltered, active Tailscale interface func, etc) and
moves the "major" change detection to net/netmon which knows more
about the world and the previous/new states.

Updates #9040

Change-Id: I7fe66a23039c6347ae5458745b709e7ebdcce245
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Joe Tsai fcbb2bf348
net/memnet: export the network name (#9111)
This makes it more maintainable for other code to statically depend
on the exact value of this string. It also makes it easier to
identify what code might depend on this string by looking up
references to this constant.

Updates tailscale/corp#13777

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
1 year ago
Andrew Dunham c86a610eb3 cmd/tailscale, net/portmapper: add --log-http option to "debug portmap"
This option allows logging the raw HTTP requests and responses that the
portmapper Client makes when using UPnP. This can be extremely helpful
when debugging strange UPnP issues with users' devices, and might allow
us to avoid having to instruct users to perform a packet capture.

Updates #8992

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I2c3cf6930b09717028deaff31738484cc9b008e4
1 year ago
Brad Fitzpatrick 98a5116434 all: adjust some build tags for plan9
I'm not saying it works, but it compiles.

Updates #5794

Change-Id: I2f3c99732e67fe57a05edb25b758d083417f083e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Brad Fitzpatrick d58ba59fd5 cmd/tailscale/cli: make netcheck run even if machine lacks TLS certs
We have a fancy package for doing TLS cert validation even if the machine
doesn't have TLS certs (for LetsEncrypt only) but the CLI's netcheck command
wasn't using it.

Also, update the tlsdial's outdated package docs while here.

Updates #cleanup

Change-Id: I74b3cb645d07af4d8ae230fb39a60c809ec129ad
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Brad Fitzpatrick e881c1caec net/netmon: factor out debounce loop, simplify polling impl
This simplifies some netmon code in prep for other changes.

It breaks up Monitor.debounce into a helper method so locking is
easier to read and things unindent, and then it simplifies the polling
netmon implementation to remove the redundant stuff that the caller
(the Monitor.debounce loop) was already basically doing.

Updates #9040

Change-Id: Idcfb45201d00ae64017042a7bdee6ef86ad37a9f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Brad Fitzpatrick 9089efea06 net/netmon: make ChangeFunc's signature take new ChangeDelta, not bool
Updates #9040

Change-Id: Ia43752064a1a6ecefc8802b58d6eaa0b71cf1f84
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Andrew Dunham 77ff705545 net/portmapper: never select port 0 in UPnP
Port 0 is interpreted, per the spec (but inconsistently among router
software) as requesting to map every single available port on the UPnP
gateway to the internal IP address. We'd previously avoided picking
ports below 1024 for one of the two UPnP methods (in #7457), and this
change moves that logic so that we avoid it in all cases.

Updates #8992

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I20d652c0cd47a24aef27f75c81f78ae53cc3c71e
1 year ago
Brad Fitzpatrick 58a4fd43d8 types/netmap, all: use read-only tailcfg.NodeView in NetworkMap
Updates #8948

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Brad Fitzpatrick 6e57dee7eb cmd/viewer, types/views, all: un-special case slice of netip.Prefix
Make it just a views.Slice[netip.Prefix] instead of its own named type.

Having the special case led to circular dependencies in another WIP PR
of mine.

Updates #8948

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
David Anderson e92adfe5e4 net/art: allow non-pointers as values
Values are still turned into pointers internally to maintain the
invariants of strideTable, but from the user's perspective it's
now possible to tbl.Insert(pfx, true) rather than
tbl.Insert(pfx, ptr.To(true)).

Updates #7781

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
Brad Fitzpatrick e8551d6b40 all: use Go 1.21 slices, maps instead of x/exp/{slices,maps}
Updates #8419

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
David Anderson 623d72c83b net/art: move child table pointers out of strideEntry
In preparation for a different refactor, but incidentally also saves
10-25% memory on overall table size in benchmarks.

Updates #7781

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
James Tucker de8e55fda6 net/netcheck,wgengine/magicsock: reduce coupling between netcheck and magicsock
Netcheck no longer performs I/O itself, instead it makes requests via
SendPacket and expects users to route reply traffic to
ReceiveSTUNPacket.

Netcheck gains a Standalone function that stands up sockets and
goroutines to implement I/O when used in a standalone fashion.

Magicsock now unconditionally routes STUN traffic to the netcheck.Client
that it hosts, and plumbs the send packet sink.

The CLI is updated to make use of the Standalone mode.

Fixes #8723

Signed-off-by: James Tucker <james@tailscale.com>
1 year ago
Maisem Ali 98ec8924c2 ipn/ipnlocal,net/tsdial: update docs/rename funcs
Updates #cleanup

Signed-off-by: Maisem Ali <maisem@tailscale.com>
1 year ago
Will Norris 69f1324c9e cmd/tailscale: refactor shared utility methods
Refactor two shared functions used by the tailscale cli,
calcAdvertiseRoutes and licensesURL. These are used by the web client as
well as other tailscale subcommands. The web client is being moved out
of the cli package, so move these two functions to new locations.

Updates tailscale/corp#13775

Signed-off-by: Will Norris <will@tailscale.com>
1 year ago
Brad Fitzpatrick be4eb6a39e derp, net/dns/recursive: use Go 1.21 min
Updates #8419

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Brad Fitzpatrick 66e46bf501 ipnlocal, net/*: deprecate interfaces.GetState, use netmon more for it
Updates #cleanup

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
David Anderson 52212f4323 all: update exp/slices and fix call sites
slices.SortFunc suffered a late-in-cycle API breakage.

Updates #cleanup

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
David Anderson 6afffece8a net/art: use more intelligible, go-ish state tracking in table.Get
Updates #7781

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
David Anderson 4f14ed2ad6 net/art: use encoding/binary for address bit twiddling
Updates #7781

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
David Anderson f1cd67488d net/art: move slice closer to its use
Updates #7781

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
David Anderson 44ad7b3746 net/art: factor out picking the right strideTable for addr family
Updates #7781

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
David Anderson 125b982ba5 net/art: make Table.Get alloc-free
Updates #7781

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
David Anderson b76d8a88ae net/art: document return value of strideTable.delete
Updates #7781

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
David Anderson b242e2c2cb net/art: reword confusing function docstring
Updates #7781

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
David Anderson 8478358d77 net/art: use "index", not "idx" in function names
Updates #7781

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
David Anderson de5c6ed4be net/art: document valid values of strideTable.prefix
Updates #7781

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
David Anderson 736a44264f net/art: fix comment typo
Updates #7781

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
David Anderson 1e6f0bb608 net/art: fix slowPrefixTable bugs found by fuzzing
One is a straight "I forgot how to Go" bug, the others are semantic
mismatches with the main implementation around masking the prefixes
passed to insert/delete.

Updates #7781

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
David Anderson aaca911904 net/art: add another consistency test for insert/delete
Updates #7781

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
David Anderson b145a22f55 net/art: add more exhaustive table testing
Updates #7781

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
David Anderson 9cc3f7a3d6 net/art: fix format of debug output
Updates #7781

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
David Anderson ac657caaf1 net/art: add debug hooks to strideTable
Updates #7781

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
David Anderson fcf4d044fa net/art: implement path compression optimization
Updates #7781

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
David Anderson 486195edf0 net/art: make each strideTable track the IP prefix it represents
This is a prerequisite for path compression, so that insert/delete
can determine when compression occurred.

Updates #7781

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
David Anderson 45b5d0983c net/art: fix running tests outside of CI
Updates #7866

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago
Michael Stapelberg 2a6c237d4c net/dns: overwrite /tmp/resolv.conf on gokrazy
Appliances built using https://gokrazy.org/ have a read-only root file system,
including /etc/resolv.conf, which is a symlink to /tmp/resolv.conf.

The system’s dhcp client overwrites /tmp/resolv.conf instead,
so we need to use this path in Tailscale, too.

related to https://github.com/gokrazy/gokrazy/issues/209

fixes https://github.com/tailscale/tailscale/issues/8689

Signed-off-by: Michael Stapelberg <michael@stapelberg.de>
1 year ago
Anton Tolchanov 388b124513 net/dns: detect when libnss_resolve is used
Having `127.0.0.53` is not the only way to use `systemd-resolved`. An
alternative way is to enable `libnss_resolve` module, which seems to now
be used by default on Debian 12 bookworm.

Fixes #8549

Signed-off-by: Anton Tolchanov <anton@tailscale.com>
1 year ago
Andrew Dunham 9b5e29761c net/netcheck: ignore PreferredDERP changes that are small
If the absolute value of the difference between the current
PreferredDERP's latency and the best latency is <= 10ms, don't change
it and instead prefer the previous value.

This is in addition to the existing hysteresis that tries to remain
on the previous DERP region if the relative improvement is small, but
handles nodes that have low latency to >1 DERP region better.

Updates #8603

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I1e34c94178f8c9a68a69921c5bc0227337514c70
1 year ago
Andrew Dunham 7aba0b0d78 net/netcheck, tailcfg: add DERPHomeParams and use it
This allows providing additional information to the client about how to
select a home DERP region, such as preferring a given DERP region over
all others.

Updates #8603

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I7c4a270f31d8585112fab5408799ffba5b75266f
1 year ago
Andrew Dunham a7648a6723 net/dnsfallback: run recursive resolver and compare results
When performing a fallback DNS query, run the recursive resolver in a
separate goroutine and compare the results returned by the recursive
resolver with the results we get from "regular" bootstrap DNS. This will
allow us to gather data about whether the recursive DNS resolver works
better, worse, or about the same as "regular" bootstrap DNS.

Updates #5853

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ifa0b0cc9eeb0dccd6f7a3d91675fe44b3b34bd48
1 year ago
Adrian Dewhurst cd4c71c122 tstest: prepare for Clock API changes
This change introduces tstime.NewClock and tstime.ClockOpts as a new way
to construct tstime.Clock. This is a subset of #8464 as a stepping stone
so that we can update our internal code to use the new API before making
the second round of changes.

Updates #8463

Change-Id: Ib26edb60e5355802aeca83ed60e4fdf806c90e27
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
1 year ago
Andrew Dunham d9eca20ee2 net/tcpinfo: add package to allow fetching TCP information
This package contains platform-independent abstractions for fetching
information about an open TCP connection.

Updates #8413

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I236657b1060d7e6a45efc7a2f6aacf474547a2fe
1 year ago
KevinLiang10 243ce6ccc1 util/linuxfw: decoupling IPTables logic from linux router
This change is introducing new netfilterRunner interface and moving iptables manipulation to a lower leveled iptables runner.

For #391

Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
1 year ago
Ross Zurowski 832f1028c7
net/netutil: parse IP forwarding val as int, not bool (#8455)
This commit updates our IP forwarding parsing logic to allow the less
common but still valid value of `2` to be parsed as `true`, which fixes
an error some users encountered.

Fixes #8375

Signed-off-by: Ross Zurowski <ross@rosszurowski.com>
1 year ago
Brad Fitzpatrick a874f1afd8 all: adjust case of "IPv4" and "IPv6"
Updates #docs

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Andrew Dunham b6d20e6f8f go.mod, net/dns/recursive: update github.com/miekg/dns
Updates #cleanup

Change-Id: If4de6a84448a17dd81cc2a8af788bd18c3d0bbe3
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
1 year ago