If there are routes changes as a side effect of an app connector
configuration update, the connector configuration may want to reenter a
lock, so must be started asynchronously.
Updates tailscale/corp#16833
Signed-off-by: James Tucker <james@tailscale.com>
Control can now send down a set of routes along with the domains, and
the routes will be advertised, with any newly overlapped routes being
removed to reduce the size of the routing table.
Fixestailscale/corp#16833
Signed-off-by: James Tucker <james@tailscale.com>
Also perform minor cleanups on the ctxkey package itself.
Provide guidance on when to use ctxkey.Key[T] over ctxkey.New.
Also, allow for interface kinds because the value wrapping trick
also happens to fix edge cases with interfaces in Go.
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
When establishing connections to the ipnserver, we validate that the
local user is allowed to connect. If Tailscale is currently being
managed by a different user (primarily for multi-user Windows installs),
we don't allow the connection.
With the new device web UI, the inbound connection is coming from
tailscaled itself, which is often running as "NT AUTHORITY\SYSTEM".
In this case, we still want to allow the connection, even though it
doesn't match the user running the Tailscale GUI. The SYSTEM user has
full access to everything on the system anyway, so this doesn't escalate
privileges.
Eventually, we want the device web UI to run outside of the tailscaled
process, at which point this exception would probably not be needed.
Updates tailscale/corp#16393
Signed-off-by: Will Norris <will@tailscale.com>
Removes the avoidFinalRename logic and all associated code as it is no longer required by the Apple clients.
Enables resume logic to be usable for Apple clients.
Fixestailscale/corp#14772
Signed-off-by: Rhea Ghosh <rhea@tailscale.com>
Individual route advertisements that are covered by existing routes are
no longer advertised. If an upstream returns 0.0.0.0, 127.x, and other
common unwanted addresses those are also rejected.
Updates #16425
Signed-off-by: James Tucker <james@tailscale.com>
The cmpx.Compare function (and associated interface) are now available
in the standard library as cmp.Compare. Remove our version of it and use
the version from the standard library.
Updates #cleanup
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4be3ac63d466c05eb7a0babb25cb0d41816fbd53
When auto-update setting in local Prefs is unset, apply the tailnet
default value from control. This only happens once, when we apply the
default (or when the user manually overrides it), tailnet default no
longer affects the node.
Updates #16244
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Previously, the "RunExitNode" policy merely controlled the visibility of
the "run as exit node" menu item, not the setting itself. This migrates
that setting to a preference option named "AdvertiseExitNode".
Updates ENG-2138
Change-Id: Ia6a125beb6b4563d380c6162637ce4088f1117a0
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Due to the Sparkle preference naming convention, macsys already has a
policy key named "ApplyUpdates" that merely shows or hides the menu
item that controls if auto updates are installed, rather than directly
controlling the setting.
For other platforms, we are going to use "InstallUpdates" instead
because it seemed better than the other options that were considered.
Updates ENG-2127
Updates tailscale/corp#16247
Change-Id: Ia6a125beb6b4563d380c6162637ce4088f1117a0
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This adds support for enforcing exit node LAN access, DNS and subnet
routes.
Adding new preference policies was getting repetitive, so this turns
some of the boilerplate into a table.
Updates tailscale/corp#15585
Updates ENG-2240
Change-Id: Iabd3c42b0ae120b3145fac066c5caa7fc4d67824
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Previously, policies affected the default prefs for a new profile, but
that does not affect existing profiles. This change ensures that
policies are applied whenever preferences are loaded or changed, so a
CLI or GUI client that does not respect the policies will still be
overridden.
Exit node IP is dropped from this PR as it was implemented elsewhere
in #10172.
Fixestailscale/corp#15585
Change-Id: Ide4c3a4b00a64e43f506fa1fab70ef591407663f
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Adds policy keys ExitNodeID and ExitNodeIP.
Uses the policy keys to determine the exit node in preferences.
Fixestailscale/corp#15683
Signed-off-by: Claire Wang <claire@tailscale.com>
Adds AllowedIPs to PeerStatus, allowing for easier lookup of the
routes allowed to be routed to a node. Will be using the AllowedIPs
of the self node from the web client interface to display approval
status of advertised routes.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
To be consistent with the formatting of other warnings, pass available
update health message instead of handling ClientVersion in he CLI.
Fixes#10312
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This PR starts to persist the NetMap tailnet name in SetPrefs so that tailscaled
clients can use this value to disambiguate fast user switching from one tailnet
to another that are under the same exact login. We will also try to backfill
this information during backend starts and profile switches so that users don't
have to re-authenticate their profile. The first client to use this new
information is the CLI in 'tailscale switch -list' which now uses text/tabwriter
to display the ID, Tailnet, and Account. Since account names are ambiguous, we
allow the user to pass 'tailscale switch ID' to specify the exact tailnet they
want to switch to.
Updates #9286
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This takes advantage of existing functionality in ipn/ipnlocal to adjust
the local clock based on periodic time signals from the control server.
This way, when checking things like SSHRule expirations, calculations are
protected incorrectly set local clocks.
Fixestailscale/corp#15796
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This change removes the existing debug-web-client localapi endpoint
and replaces it with functions passed directly to the web.ServerOpts
when constructing a web.ManageServerMode client.
The debug-web-client endpoint previously handled making noise
requests to the control server via the /machine/webclient/ endpoints.
The noise requests must be made from tailscaled, which has the noise
connection open. But, now that the full client is served from
tailscaled, we no longer need to proxy this request over the localapi.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
So the control plane can delete TXT records more aggressively
after client's done with ACME fetch.
Updates tailscale/corp#15848
Change-Id: I4f1140305bee11ee3eee93d4fec3aef2bd6c5a7e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously we would return the full error from Stat or Open, possibily exposing the full file path. This change will log the error and return the generic error message "an error occurred reading the file or directory".
Updates tailscale/corp#15485
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
In DERP homeless mode, a DERP home connection is not sought or
maintained and the local node is not reachable.
Updates #3363
Updates tailscale/corp#396
Change-Id: Ibc30488ac2e3cfe4810733b96c2c9f10a51b8331
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds a new sync.Mutex field to the webClient struct, rather than
using the general LocalBackend mutex. Since webClientGetOrInit
(previously WebClientInit) gets called on every connection, we
want to avoid holding the lock on LocalBackend just to check if
the server is initialized.
Moves all web_client.go funcs over to using the webClient.mu field.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
For consistency with the "WebClient" naming of the other functions
here. Also fixed a doc typo.
A #cleanup
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Now that 1.54 has released, and the new web client will be included in
1.56, we can remove the need for the node capability. This means that
all 1.55 unstable builds, and then eventually the 1.56 build, will work
without setting the node capability.
The web client still requires the "webclient" user pref, so this does
NOT mean that the web client will be on by default for all devices.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
return early if handler is nil. Go ahead and return the error from
handler, though in this case the caller isn't doing anything with it
(which has always been the case).
Updates #10177
Updates #10251
Signed-off-by: Will Norris <will@tailscale.com>
Tailscale serve maintains a set of listeners so that serve traffic from
the local device can be properly served when running in kernel
networking mode. #10177 refactored that logic so that it could be reused
by the internal web client as well. However, in my refactoring I missed
actually calling the serve handler to handle the traffic.
Updates #10177
Signed-off-by: Will Norris <will@tailscale.com>
This prevents a panic in some cases where WebClientShutdown is called
multiple times.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
When we run tailscled under systemd, restarting the unit kills all child
processes, including "tailscale update". And during update, the package
manager will restart the tailscaled unit. Specifically on Debian-based
distros, interrupting `apt-get install` can get the system into a wedged
state which requires the user to manually run `dpkg --configure` to
recover.
To avoid all this, use `systemd-run` where available to run the
`tailscale update` process. This launches it in a separate temporary
unit and doesn't kill it when parent unit is restarted.
Also, detect when `apt-get install` complains about aborted update and
try to restore the system by running `dpkg --configure tailscale`. This
could help if the system unexpectedly shuts down during our auto-update.
Fixes https://github.com/tailscale/corp/issues/15771
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Simply reading the taildrop directory can pop up security dialogs
on platforms like macOS. Avoid this by only performing garbage collection
of partial and deleted files after the first received taildrop file,
which would have prompted the security dialog window.
Updates tailscale/corp#14772
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This change exposes SilentDisco as a control knob, and plumbs it down to
magicsock.endpoint. No changes are being made to magicsock.endpoint
disco behavior, yet.
Updates #540
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Use the `qpkg_cli` to check for updates and install them. There are a
couple special things about this compare to other updaters:
* qpkg_cli can tell you when upgrade is available, but not what the
version is
* qpkg_cli --add Tailscale works for new installs, upgrades and
reinstalling existing version; even reinstall of existing version
takes a while
Updates #10178
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Some conditional paths may otherwise skip the hostinfo update, so kick
it off asynchronously as other code paths do.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
The local web client has the same characteristic as tailscale serve, in
that it needs a local listener to allow for connections from the local
machine itself when running in kernel networking mode.
This change renames and adapts the existing serveListener to allow it to
be used by the web client as well.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
The c2n part was broken because we were not looking up the tailscale
binary for that GOOS. The rest of the update was failing at the `pkg
upgrade` confirmation prompt. We also need to manually restart
tailscaled after update.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
As part of tailnet-lock netmap processing, the LocalBackend mutex
is unlocked so we can potentially make a network call. Its possible
(during shutdown or while the control client is being reset) for
b.cc to become nil before the lock is picked up again.
Fixes: #9554
Signed-off-by: Tom DNetto <tom@tailscale.com>
App connectors handle DNS requests for app domains over PeerAPI,
but a safety check verifies the requesting peer has at least permission
to send traffic to 0.0.0.0:53 (or 2000:: for IPv6) before handling the DNS
request. The correct filter rules are synthesized by the coordination server
and sent down, but the address needs to be part of the 'local net' for the
filter package to even bother checking the filter rules, so we set them here.
See: https://github.com/tailscale/corp/issues/11961 for more information.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates: ENG-2405
This change introduces a c2n endpoint that returns a map of domains to a
slice of resolved IP addresses for the domain.
Fixestailscale/corp#15657
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Require that requests to servers in manage mode are made to the
Tailscale IP (either ipv4 or ipv6) or quad-100. Also set various
security headers on those responses. These might be too restrictive,
but we can relax them as needed.
Allow requests to /ok (even in manage mode) with no checks. This will be
used for the connectivity check from a login client to see if the
management client is reachable.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
if the user pref and nodecap for the new web client are enabled, serve
the client over requests to 100.100.100.100. Today, that is just a
static page that lists the local Tailcale IP addresses.
For now, this will render the readonly full management client, with an
"access" button that sends the user through check mode. After
completing check mode, they will still be in the read-only view, since
they are not accessing the client over Tailscale.
Instead, quad100 should serve the lobby client that has a "manage"
button that will open the management client on the Tailscale IP (and
trigger check mode). That is something we'll fix in a subsequent PR in
the web client code itself.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
Avoids the need to pipe a web client dev flag through the tailscaled
command.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Adds a new Mode to the web server, indicating the specific
scenario the constructed server is intended to be run in. Also
starts filling this from the cli/web and ipn/ipnlocal callers.
From cli/web this gets filled conditionally based on whether the
preview web client node cap is set. If not set, the existing
"legacy" client is served. If set, both a login/lobby and full
management client are started (in "login" and "manage" modes
respectively).
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
The design changed during integration and testing, resulting in the
earlier implementation growing in the appc package to be intended now
only for the sniproxy implementation. That code is moved to it's final
location, and the current App Connector code is now renamed.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
Now uses webClientAtomicBool as the source of truth for whether the web
client should be running in tailscaled, with it updated when either the
RunWebClient pref or CapabilityPreviewWebClient node capability changes.
This avoids requiring holding the LocalBackend lock on each call to
ShouldRunWebClient to check for the CapabilityPreviewWebClient value.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
The AppConnector is now configured by the mapcap from the control plane.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
An EmbeddedAppConnector is added that when configured observes DNS
responses from the PeerAPI. If a response is found matching a configured
domain, routes are advertised when necessary.
The wiring from a configuration in the netmap capmap is not yet done, so
while the connector can be enabled, no domains can yet be added.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
WebClientShutdown tries to acquire the b.mu lock, so run it in a go
routine so that it can finish shutdown after setPrefsLockedOnEntry is
finished. This is the same reason b.sshServer.Shutdown is run in a go
routine.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
For consistency and clarity around what the LocalBackend.web field
is used for.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
instead of starting a separate server listening on a particular port,
use the TCPHandlerForDst method to intercept requests for the special
web client port (currently 5252, probably configurable later).
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
This is not currently exposed as a user-settable preference through
`tailscale up` or `tailscale set`. Instead, the preference is set when
turning the web client on and off via localapi. In a subsequent commit,
the pref will be used to automatically start the web client on startup
when appropriate.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
Allows for serving the web interface from tailscaled, with the
ability to start and stop the server via localapi endpoints
(/web/start and /web/stop).
This will be used to run the new full management web client,
which will only be accessible over Tailscale (with an extra auth
check step over noise) from the daemon. This switch also allows
us to run the web interface as a long-lived service in environments
where the CLI version is restricted to CGI, allowing us to manage
certain auth state in memory.
ipn/ipnlocal/web is stubbed out in ipn/ipnlocal/web_stub for
ios builds to satisfy ios restriction from adding "text/template"
and "html/template" dependencies.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
On Windows, the idiomatic way to check access on a named pipe is for
the server to impersonate the client on its current OS thread, perform
access checks using the client's access token, and then revert the OS
thread's access token back to its true self.
The access token is a better representation of the client's rights than just
a username/userid check, as it represents the client's effective rights
at connection time, which might differ from their normal rights.
This patch updates safesocket to do the aforementioned impersonation,
extract the token handle, and then revert the impersonation. We retain
the token handle for the remaining duration of the connection (the token
continues to be valid even after we have reverted back to self).
Since the token is a property of the connection, I changed ipnauth to wrap
the concrete net.Conn to include the token. I then plumbed that change
through ipnlocal, ipnserver, and localapi as necessary.
I also added a PermitLocalAdmin flag to the localapi Handler which I intend
to use for controlling access to a few new localapi endpoints intended
for configuring auto-update.
Updates https://github.com/tailscale/tailscale/issues/755
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
In addition to the new policy keys for the new options, some
already-in-use but missing policy keys are also being added to
util/syspolicy.
Updates ENG-2133
Change-Id: Iad08ca47f839ea6a65f81b76b4f9ef21183ebdc6
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
clientupdate.Updater will have a non-nil Update func in a few cases
where it doesn't actually perform an update:
* on Arch-like distros, where it prints instructions on how to update
* on macOS app store version, where it opens the app store page
Add a new clientupdate.Arguments field to cause NewUpdater to fail when
we hit one of these cases. This results in c2n updates being "not
supported" and `tailscale set --auto-update` returning an error.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
It would end up resetting whatever hostinfo we had constructed
and leave the backend statemachine in a broken state.
This fixes that by storing the PushDeviceToken on the LocalBackend
and populating it on Hostinfo before passing it to controlclient.
Updates tailscale/corp#8940
Updates tailscale/corp#15367
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The value being passed was the same as whats on b.hostinfo, so just
use that directly.
Updates #cleanup
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds a check to prevent changes to ServeConfig if tailscaled
is run with a Locked config.
Missed in 1fc3573446.
Updates #1412
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Ensure that when a userspace proxy config is reloaded,
connections for any removed proxies are safely closed
Updates tailscale/tailscale#9725
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Initiates http/h2c transport for userspace proxy
backend lazily and at most once.
Updates tailscale/tailscale#9725
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Updates userspace proxy to detect plaintext grpc requests
using the preconfigured host prefix and request's content
type header and ensure that these will be proxied over h2c.
Updates tailscale/tailscale#9725
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
While the previous logic was correct, it did not perform well.
Resuming is a dance between the client and server, where
1. the client requests hashes for a partial file,
2. the server then computes those hashes,
3. the client computes hashes locally and compares them.
4. goto 1 while the partial file still has data
While step 2 is running, the client is sitting idle.
While step 3 is running, the server is sitting idle.
By streaming over the block hash immediately after the server
computes it, the client can start checking the hash,
while the server works on the next hash (in a pipelined manner).
This performs dramatically better and also uses less memory
as we don't need to hold a list of hashes, but only need to
handle one hash at a time.
There are two detriments to this approach:
* The HTTP API relies on a JSON stream,
which is not a standard REST-like pattern.
However, since we implement both client and server,
this is fine.
* While the stream is on-going, we hold an open file handle
on the server side while the file is being hashed.
On really slow streams, this could hold a file open forever.
Updates tailscale/corp#14772
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Co-authored-by: Rhea Ghosh <rhea@tailscale.com>
Minor fixes:
* The branch for listing or hashing partial files was inverted.
* The host for peerapi call needs to be real (rather than bogus).
* Handle remote peers that don't support resuming.
* Make resume failures non-fatal (since we can still continue).
This was tested locally, end-to-end system test is future work.
Updates tailscale/corp#14772
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Co-authored-by: Rhea Ghosh <rhea@tailscale.com>
Two bug fixes:
1. when tailscale update is executed as root, `os.UserCacheDir` may
return an error because `$XDG_CACHE_HOME` and `$HOME` are not set;
fallback to `os.TempDir` in those cases
2. on some weird distros (like my EndeavourOS), `/usr/sbin` is just a
symlink to `/usr/bin`; when we resolve `tailscale` binary path from
`tailscaled`, allow `tailscaled` to be in either directory
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
File resumption requires keeping partial files around for some time,
but we must still eventually delete them if never resumed.
Thus, we implement asynchronous file deletion, which could
spawn a background goroutine to delete the files.
We also use the same mechanism for deleting files on Windows,
where a file can't be deleted if there is still an open file handle.
We can enqueue those with the asynchronous file deleter as well.
Updates tailscale/corp#14772
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The old code would always retain value `true` if it was set once, even
if you then change `prefs.AutoUpdate.Apply` to `false`.
Instead of using the previous value, use the default (envknob) value to
OR with.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This change:
* adds a partial files peerAPI endpoint to get a list of partial files
* adds a helper function to extract the basename of a file
* updates the peer put peerAPI endpoint
* updates the file put localapi endpoint to allow resume functionality
Updates #14772
Signed-off-by: Rhea Ghosh <rhea@tailscale.com>
The Sparkle-based update is not quite working yet. Make `NewUpdater`
return `ErrUnsupported` for it to avoid the proliferation of exceptions
up the stack.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This commit changes the PostureChecking syspolicy key to be a
PreferenceOption(user-defined, always, never) instead of Bool.
This aligns better with the defaults implementation on macOS allowing
CLI arguments to be read when user-defined or no defaults is set.
Updates #tailscale/tailscale/5902
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
We add the following API:
* type FileChecksums
* type Checksum
* func Manager.PartialFiles
* func Manager.HashPartialFile
* func ResumeReader
The Manager methods provide the ability to query for partial files
and retrieve a list of checksums for a given partial file.
The ResumeReader function is a helper that wraps an io.Reader
to discard content that is identical locally and remotely.
The FileChecksums type represents the checksums of a file
and is safe to JSON marshal and send over the wire.
Updates tailscale/corp#14772
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Co-authored-by: Rhea Ghosh <rhea@tailscale.com>
We were eagerly doing a synchronous renewal of the cert while
trying to serve traffic. Instead of that, just do the cert
renewal in the background and continue serving traffic as long
as the cert is still valid.
This regressed in c1ecae13ab when
we introduced ARI support and were trying to make the experience
of `tailscale cert` better. However, that ended up regressing
the experience for tsnet as it would not always doing the renewal
synchronously.
Fixes#9783
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Changes made:
* Move all HTTP related functionality from taildrop to ipnlocal.
* Add two arguments to taildrop.Manager.PutFile to specify
an opaque client ID and a resume offset (both unused for now).
* Cleanup the logic of taildrop.Manager.PutFile
to be easier to follow.
* Implement file conflict handling where duplicate files are renamed
(e.g., "IMG_1234.jpg" -> "IMG_1234 (2).jpg").
* Implement file de-duplication where "renaming" a partial file
simply deletes it if it already exists with the same contents.
* Detect conflicting active puts where a second concurrent put
results in an error.
Updates tailscale/corp#14772
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Co-authored-by: Rhea Ghosh <rhea@tailscale.com>
These log paths were actually unexpected until the refactor in
fe95d81b43. This moves the logs
to the callsites where they are actually unexpected.
Fixes#9670
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This commit adds support for getting serial numbers from SMBIOS
on Windows/Linux (and BSD) using go-smbios.
Updates #5902
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
Changes made:
* Unexport declarations specific to internal taildrop functionality.
* Document all exported functionality.
* Move TestRedactErr to the taildrop package.
* Rename and invert Handler.DirectFileDoFinalRename as AvoidFinalRename.
Updates tailscale/corp#14772
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This is being moved to taildrop, so clean it up to stop depending
on so much unreleated functionality by removing a dependency
on peerAPIHandler.
Updates tailscale/corp#14772
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Co-authored-by: Rhea Ghosh <rhea@tailscale.com>
Over time all taildrop functionality will be contained in the
taildrop package. This will include end to end unit tests. This is
simply the first smallest piece to move over.
There is no functionality change in this commit.
Updates tailscale/corp#14772
Signed-off-by: Rhea Ghosh <rhea@tailscale.com>
Co-authored-by: Joseph Tsai <joetsai@tailscale.com>
Advertise it on Android (it looks like it already works once advertised).
And both advertise & likely fix it on iOS. Yet untested.
Updates #9672
Change-Id: If3b7e97f011dea61e7e75aff23dcc178b6cf9123
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This optionally uploads MAC address(es) to control, then adds a
c2n handler so control can ask a node to send a WoL packet.
Updates #306
RELNOTE=now supports waking up peer nodes on your LAN via Wake-on-LAN packets
Change-Id: Ibea1275fcd2048dc61d7059039abfbaf1ad4f465
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Make the 'tailscale debug component-logs' command print the component names for
which extra logging can be turned on, for easier discoverability of debug
functions.
Updates #cleanup
Co-authored-by: Paul Scott <paul@tailscale.com>
Signed-off-by: Val <valerie@tailscale.com>
Thanks to @qur and @eric for debugging!
Fixes#6973
Change-Id: Ib2cf8f030cf595cc73dd061c72e78ac19f5fae5d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Control sends ExitNodeDNSResolvers when configured for IsWireGuardOnly
nodes that are to be used as the default resolver with a lower
precedence than split DNS, and a lower precedence than "Override local
DNS", but otherwise before local DNS is used when the exit node is in
use.
Neither of the below changes were problematic, but appeared so alongside
a number of other client and external changes. See tailscale/corp#14809.
Reland ea9dd8fabc.
Reland d52ab181c3.
Updates #9377
Updates tailscale/corp#14809
Signed-off-by: James Tucker <james@tailscale.com>
This PR ensures zombie foregrounds are shutdown if a new
ServeConfig is created that wipes the ongoing foreground ones.
For example, "tailscale serve|funnel reset|off" should close
all open sessions.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
For loading testing & profiling the cost of full netmap updates.
Updates #1909
Change-Id: I0afdf5de9967f8d95c7f81d5b531ed1c92c3208f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This would've prevented #9470.
This used to pass, fails as of 9538e9f970, and passes again
once #9472 is in.
Updates #9470
Change-Id: Iab97666f7a318432fb3b6372a177ab50c55d4697
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
9538e9f970 broke LocalBackend.WhoIs
where you can no longer lookup yourself in WhoIs.
This occurs because the LocalBackend.peers map only contains peers.
If we fail to lookup a peer, double-check whether it is ourself.
Fixes#9470
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Co-authored-by: Rhea Ghosh <rhea@tailscale.com>
The initial implementation directly mirrored the behavior of Tailscale
exit nodes, where the WireGuard exit node DNS took precedence over other
configuration.
This adjusted implementation treats the WireGuard DNS
resolvers as a lower precedence default resolver than the tailnet
default resolver, and allows split DNS configuration as well.
This also adds test coverage to the existing DNS selection behavior with
respect to default resolvers and split DNS routes for Tailscale exit
nodes above cap 25. There may be some refinement to do in the logic in
those cases, as split DNS may not be working as we intend, though that
would be a pre-existing and separate issue.
Updates #9377
Signed-off-by: James Tucker <james@tailscale.com>
This PR plumbs through awareness of an IPv6 SNAT/masquerade address from the wire protocol
through to the low-level (tstun / wgengine). This PR is the first in two PRs for implementing
IPv6 NAT support to/from peers.
A subsequent PR will implement the data-plane changes to implement IPv6 NAT - this is just plumbing.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates ENG-991
Like PeerCapMap, add a field to `tailcfg.Node` which provides
a map of Capability to raw JSON messages which are deferred to be
parsed later by the application code which cares about the specific
capabilities. This effectively allows us to prototype new behavior
without having to commit to a schema in tailcfg, and it also opens up
the possibilities to develop custom behavior in tsnet applications w/o
having to plumb through application specific data in the MapResponse.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
And convert all callers over to the methods that check SelfNode.
Now we don't have multiple ways to express things in tests (setting
fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't
have multiple ways to check those two fields (often only checking one
or the other).
Updates #9443
Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have some flaky integration tests elsewhere that have no one place
to ask about the state of the world. This makes LocalBackend be that
place (as it's basically there anyway) but doesn't yet add the ForTest
accessor method.
This adds a LocalBackend.peers map[NodeID]NodeView that is
incrementally updated as mutations arrive. And then we start moving
away from using NetMap.Peers at runtime (UpdateStatus no longer uses
it now). And remove another copy of NodeView in the LocalBackend
nodeByAddr map. Change that to point into b.peers instead.
Future changes will then start streaming whole-node-granularity peer
change updates to WatchIPNBus clients, tracking statefully per client
what each has seen. This will get the GUI clients from receiving less
of a JSON storm of updates all the time.
Updates #1909
Change-Id: I14a976ca9f493bdf02ba7e6e05217363dcf422e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
NetworkMap.Addresses is redundant with the SelfNode.Addresses. This
works towards a TODO to delete NetworkMap.Addresses and replace it
with a method.
This is similar to #9389.
Updates #cleanup
Change-Id: Id000509ca5d16bb636401763d41bdb5f38513ba0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* Remove unnecessary mutexes (there's no concurrency)
* Simplify LocalBackend.UpdateStatus using the StatusBuilder.WantPeers
field that was added in 0f604923d3, removing passing around some
method values into func args. And then merge two methods.
More remains, but this is a start.
Updates #9433
Change-Id: Iaf2d7ec6e4e590799f00bae185465a4fd089b822
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This enables installing default resolvers specified by
tailcfg.Node.ExitNodeDNSResolvers when the exit node is selected.
Updates #9377
Signed-off-by: James Tucker <james@tailscale.com>
It has one user (LocalBackend) which can ask magicsock itself.
Updates #cleanup
Change-Id: I8c03cbb1e5ba57b0b442621b5fa467030c14a2e2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
(continuing the mission of removing rando methods from the Engine
interface that we don't need anymore)
Updates #cleanup
Change-Id: Id5190917596bf04d7185c3b331a852724a3f5a16
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We always have one. Stop pretending we might not.
Instead, add one early panic in NewLocalBackend if we actually don't.
Updates #cleanup
Change-Id: Iba4b78ed22cb6248e59c2b01a79355ca7a200ec8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
LocalBackend can talk to magicsock on its own to do this without
the "Engine" being involved.
(Continuing a little side quest of cleaning up the Engine
interface...)
Updates #cleanup
Change-Id: I8654acdca2b883b1bd557fdc0cfb90cd3a418a62
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It had exactly one user: netstack. Just have LocalBackend notify
netstack when here's a new netmap instead, simplifying the bloated
Engine interface that has grown a bunch of non-Engine-y things.
(plenty of rando stuff remains after this, but it's a start)
Updates #cleanup
Change-Id: I45e10ab48119e962fc4967a95167656e35b141d8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Currently only the top four most popular changes: endpoints, DERP
home, online, and LastSeen.
Updates #1909
Change-Id: I03152da176b2b95232b56acabfb55dcdfaa16b79
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I missed connecting some controlknobs.Knobs pieces in 4e91cf20a8
resulting in that breaking control knobs entirely.
Whoops.
The fix in ipn/ipnlocal (where it makes a new controlclient) but to
atone, I also added integration tests. Those integration tests use
a new "tailscale debug control-knobs" which by itself might be useful
for future debugging.
Updates #9351
Change-Id: Id9c89c8637746d879d5da67b9ac4e0d2367a3f0d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR adds optimistic concurrency control in the local client and
api in order to ensure multiple writes of the ServeConfig do not
conflict with each other.
Updates #9273
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Previously two tsnet nodes in the same process couldn't have disjoint
sets of controlknob settings from control as both would overwrite each
other's global variables.
This plumbs a new controlknobs.Knobs type around everywhere and hangs
the knobs sent by control on that instead.
Updates #9351
Change-Id: I75338646d36813ed971b4ffad6f9a8b41ec91560
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
All platforms use it at this point, including iOS which was the
original hold out for memory reasons. No more reason to make it
optional.
Updates #9332
Change-Id: I743fbc2f370921a852fbcebf4eb9821e2bdd3086
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Cache the last `ClientVersion` value that was received from coordination
server and pass it in the localapi `/status` response.
When running `tailscale status`, print a message if `RunningAsLatest` is
`false`.
Updates #6907
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Log some progress info to make updates more debuggable. Also, track
whether an active update is already started and return an error if
a concurrent update is attempted.
Some planned future PRs:
* add JSON output to `tailscale update`
* use JSON output from `tailscale update` to provide a more detailed
status of in-progress update (stage, download progress, etc)
Updates #6907
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This PR adds a new field to the serve config that can be used to identify which serves are in "foreground mode" and then can also be used to ensure they do not get persisted to disk so that if Tailscaled gets ungracefully shutdown, the reloaded ServeConfig will not have those ports opened.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR removes the per request logging to the CLI as the CLI
will not be displaying those logs initially.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR adds a new field to the ServeConfig which maps
WatchIPNBus session ids to foreground serve configs.
The PR also adds a DeleteForegroundSession method to ensure the config
gets cleaned up on sessions ending.
Note this field is not currently used but will be in follow up work.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
It would acquire the lock, calculate `nextState`, relase
the lock, then call `enterState` which would acquire the lock
again. There were obvious races there which could lead to
nil panics as seen in a test in a different repo.
```
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x2 addr=0x70 pc=0x1050f2c7c]
goroutine 42240 [running]:
tailscale.com/ipn/ipnlocal.(*LocalBackend).enterStateLockedOnEntry(0x14002154e00, 0x6)
tailscale.com/ipn/ipnlocal/local.go:3715 +0x30c
tailscale.com/ipn/ipnlocal.(*LocalBackend).enterState(0x14002154e00?, 0x14002e3a140?)
tailscale.com/ipn/ipnlocal/local.go:3663 +0x8c
tailscale.com/ipn/ipnlocal.(*LocalBackend).stateMachine(0x14001f5e280?)
tailscale.com/ipn/ipnlocal/local.go:3836 +0x2c
tailscale.com/ipn/ipnlocal.(*LocalBackend).setWgengineStatus(0x14002154e00, 0x14002e3a190, {0x0?, 0x0?})
tailscale.com/ipn/ipnlocal/local.go:1193 +0x4d0
tailscale.com/wgengine.(*userspaceEngine).RequestStatus(0x14005d90300)
tailscale.com/wgengine/userspace.go:1051 +0x80
tailscale.com/wgengine.NewUserspaceEngine.func2({0x14002e3a0a0, 0x2, 0x140025cce40?})
tailscale.com/wgengine/userspace.go:318 +0x1a0
tailscale.com/wgengine/magicsock.(*Conn).updateEndpoints(0x14002154700, {0x105c13eaf, 0xf})
tailscale.com/wgengine/magicsock/magicsock.go:531 +0x424
created by tailscale.com/wgengine/magicsock.(*Conn).ReSTUN in goroutine 42077
tailscale.com/wgengine/magicsock/magicsock.go:2142 +0x3a4
```
Updates tailscale/corp#14480
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This PR adds a SessionID field to the ipn.Notify struct so that
ipn buses can identify a session and register deferred clean up
code in the future. The first use case this is for is to be able to
tie foreground serve configs to a specific watch session and ensure
its clean up when a connection is closed.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
If Start was called multiple times concurrently, it would
create a new client and shutdown the previous one. However
there was a race possible between shutting down the old one
and assigning a new one where the concurent goroutine may
have assigned another one already and it would leak.
Updates tailscale/corp#14471
Signed-off-by: Maisem Ali <maisem@tailscale.com>
resetControlClientLocked is called while b.mu was held and
would call cc.Shutdown which would wait for the observer queue
to drain.
However, there may be active callbacks from cc already waiting for
b.mu resulting in a deadlock.
This makes it so that resetControlClientLocked does not call
Shutdown, and instead just returns the value.
It also makes it so that any status received from previous cc
are ignored.
Updates tailscale/corp#12827
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The flags are hidden for now. Adding propagation to tailscaled and
persistence only. The prefs field is wrapped in a struct to allow for
future expansion (like update schedule).
Updates #6907
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
> **Note**
> Behind the `TAILSCALE_USE_WIP_CODE` flag
In preparing for incoming CLI changes, this PR merges the code path for the `serve` and `funnel` subcommands.
See the parent issue for more context.
The following commands will run in foreground mode when using the environment flag.
```
tailscale serve localhost:3000
tailscae funnel localhost:3000
```
Replaces #9134
Updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Co-authored-by: Marwan Sulaiman <marwan@tailscale.com>
During Shutdown of an ephemeral node, we called Logout (to best effort
delete the node earlier), which then called back into
resetForProfileChangeLockedOnEntry, which then tried to Start
again. That's all a waste of work during shutdown and complicates
other cleanups coming later.
Updates #cleanup
Change-Id: I0b8648cac492fc70fa97c4ebef919bbe352c5d7b
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We already removed the async API, make it more sync and remove
the FinishLogout state too.
This also makes the callback be synchronous again as the previous
attempt was trying to work around the logout callback resulting
in a client shutdown getting blocked forever.
Updates #3833
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We have cases where the SetControlClientStatus would result in
a Shutdown call back into the auto client that would block
forever. The right thing to do here is to fix the LocalBackend
state machine but thats a different dumpster fire that we
are slowly making progress towards.
This makes it so that the SetControlClientStatus happens in a
different goroutine so that calls back into the auto client
do not block.
Also add a few missing mu.Unlocks in LocalBackend.Start.
Updates #9181
Signed-off-by: Maisem Ali <maisem@tailscale.com>
* don't try to re-Start (and thus create a new client) during Shutdown
* in tests, wait for controlclient to fully shut down when replacing it
* log a bit more
Updates tailscale/corp#14139
Updates tailscale/corp#13175 etc
Updates #9178 and its flakes.
Change-Id: I3ed2440644dc157aa6e616fe36fbd29a6056846c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
They were entirely redundant and 1:1 with the status field
so this turns them into methods instead.
Updates #cleanup
Updates #1909
Change-Id: I7d939750749edf7dae4c97566bbeb99f2f75adbc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For now the method has only one interface (the same as the func it's
replacing) but it will grow, eventually with the goal to remove the
controlclient.Status type for most purposes.
Updates #1909
Change-Id: I715c8bf95e3f5943055a94e76af98d988558a2f2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Printing out JSON representation things in log output is pretty common.
Updates #cleanup
Change-Id: Ife2d2e321a18e6e1185efa8b699a23061ac5e5a4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Upcoming work on incremental netmap change handling will require some
replumbing of which subsystems get notified about what. Done naively,
it could break "tailscale status --json" visibility later. To make sure
I understood the flow of all the updates I was rereading the status code
and realized parts of ipnstate.Status were being populated by the wrong
subsystems.
The engine (wireguard) and magicsock (data plane, NAT traveral) should
only populate the stuff that they uniquely know. The WireGuard bits
were fine but magicsock was populating stuff stuff that LocalBackend
could've better handled, so move it there.
Updates #1909
Change-Id: I6d1b95d19a2d1b70fbb3c875fac8ea1e169e8cb0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR addresses a number of the follow ups from PR #8491 that were written
after getting merged.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
It was in SelfNode.Hostinfo anyway. The redundant copy was just
costing us an allocation per netmap (a Hostinfo.Clone).
Updates #1909
Change-Id: Ifac568aa5f8054d9419828489442a0f4559bc099
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds ability to start Funnel in the foreground and stream incoming
connections. When foreground process is stopped, Funnel is turned
back off for the port.
Exampe usage:
```
TAILSCALE_FUNNEL_V2=on tailscale funnel 8080
```
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
And optimize the Persist setting a bit, allocating later and only mutating
fields when there's been a Node change.
Updates #1909
Change-Id: Iaddfd9e88ef76e1d18e8d0a41926eb44d0955312
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In b987b2ab18 (2021-01-12) when we introduced sharing we mapped
the sharer to the userid at a low layer, mostly to fix the display of
"tailscale status" and the client UIs, but also some tests.
The commit earlier today, 7dec09d169, removed the 2.5yo option
to let clients disable that automatic mapping, as clearly we were never
getting around to it.
This plumbs the Sharer UserID all the way to ipnstatus so the CLI
itself can choose to print out the Sharer's identity over the node's
original owner.
Then we stop mangling Node.User and let clients decide how they want
to render things.
To ease the migration for the Windows GUI (which currently operates on
tailcfg.Node via the NetMap from WatchIPNBus, instead of PeerStatus),
a new method Node.SharerOrUser is added to do the mapping of
Sharer-else-User.
Updates #1909
Updates tailscale/corp#1183
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I screwed this up in 58a4fd43d as I expected. I even looked out for
cases like this (because this always happens) and I still missed
it. Vet doesn't flag these because they're not the standard printf
funcs it knows about. TODO: make our vet recognize all our
"logger.Logf" types.
Updates #8948
Change-Id: Iae267d5f81da49d0876b91c0e6dc451bf7dcd721
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Make it just a views.Slice[netip.Prefix] instead of its own named type.
Having the special case led to circular dependencies in another WIP PR
of mine.
Updates #8948
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Now a nodeAttr: ForceBackgroundSTUN, DERPRoute, TrimWGConfig,
DisableSubnetsIfPAC, DisableUPnP.
Kept support for, but also now a NodeAttr: RandomizeClientPort.
Removed: SetForceBackgroundSTUN, SetRandomizeClientPort (both never
used, sadly... never got around to them. But nodeAttrs are better
anyway), EnableSilentDisco (will be a nodeAttr later when that effort
resumes).
Updates #8923
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We would only look for duplicate profiles when a new login
occurred but when using `--force-reauth` we could switch
users which would end up with duplicate profiles.
Updates #7726
Signed-off-by: Maisem Ali <maisem@tailscale.com>
There are a few situations where we end up with duplicate profiles.
Add tests to identify those situations, fix in followup.
Updates #7726
Signed-off-by: Maisem Ali <maisem@tailscale.com>
It was being modified in two places in Direct for the auth routine
and then in LocalBackend when a new NetMap was received. This was
confusing, so make Direct also own changes to Persist when a new
NetMap is received.
Updates #7726
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds the capability to pad disco ping message payloads to reach a
specified size. It also plumbs it through to the tailscale ping -size
flag.
Disco pings used for actual endpoint discovery do not use this yet.
Updates #311.
Signed-off-by: salman <salman@tailscale.com>
Co-authored-by: Val <valerie@tailscale.com>
Rather than make each ipn.StateStore implementation guard against
useless writes (a write of the same value that's already in the
store), do writes via a new wrapper that has a fast path for the
unchanged case.
This then fixes profileManager's flood of useless writes to AWS SSM,
etc.
Updates #8785
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The revoke-keys command allows nodes with tailnet lock keys
to collaborate to erase the use of a compromised key, and remove trust
in it.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates ENG-1848
While our `shouldStartDomainRenewal` check is correct, `getCertPEM`
would always bail if the existing cert is not expired. Add the same
`shouldStartDomainRenewal` check to `getCertPEM` to make it proceed with
renewal when existing certs are still valid but should be renewed.
The extra check is expensive (ARI request towards LetsEncrypt), so cache
the last check result for 1hr to not degrade `tailscale serve`
performance.
Also, asynchronous renewal is great for `tailscale serve` but confusing
for `tailscale cert`. Add an explicit flag to `GetCertPEM` to force a
synchronous renewal for `tailscale cert`.
Fixes#8725
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This change introduces a new subcommand, `exit-node`, along with a
subsubcommand of `list` and a `--filter` flag.
Exit nodes without location data will continue to be displayed when
`status` is used. Exit nodes with location data will only be displayed
behind `exit-node list`, and in status if they are the active exit node.
The `filter` flag can be used to filter exit nodes with location data by
country.
Exit nodes with Location.Priority data will have only the highest
priority option for each country and city listed. For countries with
multiple cities, a <Country> <Any> option will be displayed, indicating
the highest priority node within that country.
Updates tailscale/corp#13025
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Define PeerCapabilty and PeerCapMap as the new way of sending down
inter-peer capability information.
Previously, this was unstructured and you could only send down strings
which got too limiting for certain usecases. Instead add the ability
to send down raw JSON messages that are opaque to Tailscale but provide
the applications to define them however they wish.
Also update accessors to use the new values.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
When using a custom http port like 8080, this was resulting in a
constructed hostname of `host.tailnet.ts.net:8080.tailnet.ts.net` when
looking up the serve handler. Instead, strip off the port before adding
the MagicDNS suffix.
Also use the actual hostname in `serve status` rather than the literal
string "host".
Fixes#8635
Signed-off-by: Will Norris <will@tailscale.com>
The server hasn't sent it in ages.
Updates #cleanup
Change-Id: I9695ab0f074ec6fb006e11faf3cdfc5ca049fbf8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
ScrubbedGoroutineDump previously only returned the stacks of all
goroutines. I also want to be able to use this for only the current
goroutine's stack. Add a bool param to support both ways.
Updates tailscale/corp#5149
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds a `Tailscale-Headers-Info` header whenever the `Tailscale-User-`
headers are filled from the HTTP proxy handler.
Planning on hooking this shorturl up to KB docs about the header
values (i.e. what's a login name vs. display name) and security
considerations to keep in mind while using these headers - notibly
that they can also be filled from external requests that do not hit
tailscaled.
Updates https://github.com/tailscale/tailscale/issues/6954
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Trying to SSH when SELinux is enforced results in errors like:
```
➜ ~ ssh ec2-user@<ip>
Last login: Thu Jun 1 22:51:44 from <ip2>
ec2-user: no shell: Permission denied
Connection to <ip> closed.
```
while the `/var/log/audit/audit.log` has
```
type=AVC msg=audit(1685661291.067:465): avc: denied { transition } for pid=5296 comm="login" path="/usr/bin/bash" dev="nvme0n1p1" ino=2564 scontext=system_u:system_r:unconfined_service_t:s0 tcontext=unconfined_u:unconfined_r:unconfined_t:s0 tclass=process permissive=0
```
The right fix here would be to somehow install the appropriate context when
tailscale is installed on host, but until we figure out a way to do that
stop using the `login` cmd in these situations.
Updates #4908
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Adds two new headers to HTTP serve proxy:
- `Tailscale-User-Login`: Filled with requester's login name.
- `Tailscale-User-Name`: Filled with requester's display name.
These headers only get filled when the SrcAddr is associated with
a non-tagged (i.e. user-owned) node within the client's Tailnet.
The headers are passed through empty when the request originated
from another tailnet, or the public internet (via funnel).
Updates https://github.com/tailscale/tailscale/issues/6954
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
* tka: provide verify-deeplink local API endpoint
Fixes https://github.com/tailscale/tailscale/issues/8302
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
Address code review comments
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
Address code review comments by Ross
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
* Improve error encoding, fix logic error
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
---------
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
The netstack code had a bunch of logic to figure out if the LocalBackend should handle an
incoming connection and then would call the function directly on LocalBackend. Move that
logic to LocalBackend and refactor the methods to return conn handlers.
Updates #cleanup
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This is a follow up on PR #8172 that adds a synchronous Poll method
which allows for the Poller to be used as a zero value without needing
the constructor. The local backend is also changed to use the new API.
A follow up PR will remove the async functionality from the portlist package.
Updates #8171
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Instead of renewing certificates based on whether or not they're expired
at a fixed 14-day period in the future, renew based on whether or not
we're more than 2/3 of the way through the certificate's lifetime. This
properly handles shorter-lived certificates without issue.
Updates #8204
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I5e82a9cadc427c010d04ce58c7f932e80dd571ea
This change introduces a NodeKey func on localbackend that returns the
public node key.
Updates tailscale/corp#9967
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
It was supposed to be best effort but in some cases (macsys at least,
per @marwan-at-work) it hangs and exhausts the whole context.Context
deadline so we fail to make the SetDNS call to the server.
Updates #8067
Updates #3273 etc
Change-Id: Ie1f04abe9689951484748aecdeae312afbafdb0f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is part of an effort to clean up tailscaled initialization between
tailscaled, tailscaled Windows service, tsnet, and the mac GUI.
Updates #8036
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This fix does not seem ideal, but the test infrastructure using a local
goos doesn't seem to avoid all of the associated challenges, but is
somewhat deeply tied to the setup.
The core issue this addresses for now is that when run on Windows there
can be no code paths that attempt to use an invalid UID string, which on
Windows is described in [1].
For the goos="linux" tests, we now explicitly skip the affected
migration code if runtime.GOOS=="windows", and for the Windows test we
explicitly use the running users uid, rather than just the string
"user1". We also now make the case where a profile exists and has
already been migrated a non-error condition toward the outer API.
Updates #7876
[1] https://learn.microsoft.com/en-us/windows-server/identity/ad-ds/manage/understand-security-identifiers
Signed-off-by: James Tucker <jftucker@gmail.com>
On some platforms (notably macOS and iOS) we look up the default
interface to bind outgoing connections to. This is both duplicated
work and results in logspam when the default interface is not available
(i.e. when a phone has no connectivity, we log an error and thus cause
more things that we will try to upload and fail).
Fixed by passing around a netmon.Monitor to more places, so that we can
use its cached interface state.
Fixes#7850
Updates #7621
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
We're using it in more and more places, and it's not really specific to
our use of Wireguard (and does more just link/interface monitoring).
Also removes the separate interface we had for it in sockstats -- it's
a small enough package (we already pull in all of its dependencies
via other paths) that it's not worth the extra complexity.
Updates #7621
Updates #7850
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This is a follow-up to #7905 that adds two more linters and fixes the corresponding findings. As per the previous PR, this only flags things that are "obviously" wrong, and fixes the issues found.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8739bdb7bc4f75666a7385a7a26d56ec13741b7c
Without this, the peer fails to do anything over the PeerAPI if it
has a masquerade address.
```
Apr 19 13:58:15 hydrogen tailscaled[6696]: peerapi: invalid request from <ip>:58334: 100.64.0.1/32 not found in self addresses
```
Updates #8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Exposes some internal state of the sockstats package via the C2N and
PeerAPI endpoints, so that it can be used for debugging. For now this
includes the estimated radio on percentage and a second-by-second view
of the times the radio was active.
Also fixes another off-by-one error in the radio on percentage that
was leading to >100% values (if n seconds have passed since we started
to monitor, there may be n + 1 possible seconds where the radio could
have been on).
Updates tailscale/corp#9230
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This adds an initial and intentionally minimal configuration for
golang-ci, fixes the issues reported, and adds a GitHub Action to check
new pull requests against this linter configuration.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8f38fbc315836a19a094d0d3e986758b9313f163
Redoes the approach from #5550 and #7539 to explicitly pass in the logf
function, instead of having global state that can be overridden.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
We accidentally switched to ./tool/go in
4022796484 which resulted in no longer
running Windows builds, as this is attempting to run a bash script.
I was unable to quickly fix the various tests that have regressed, so
instead I've added skips referencing #7876, which we need to back and
fix.
Updates #7262
Updates #7876
Signed-off-by: James Tucker <james@tailscale.com>
Otherwise there may be a panic if it's nil (and the control side of
the c2n call will just time out).
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Makes it more apparent in the PeerAPI endpoint that the client was
not built with the appropriate toolchain or build tags.
Updates tailscale/corp#9230
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This makes the sockstat logger available on all builds, but only enables
it by default for unstable. For stable builds, the logger must be
explicitly enabled via C2N component logger.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Will Norris <will@tailscale.com>
I realized that a lot of the problems that we're seeing around migration and
LocalBackend state can be avoided if we drive Windows pref migration entirely
from within tailscaled. By doing it this way, tailscaled can automatically
perform the migration as soon as the connection with the client frontend is
established.
Since tailscaled is already running as LocalSystem, it already has access to
the user's local AppData directory. The profile manager already knows which
user is connected, so we simply need to resolve the user's prefs file and read
it from there.
Of course, to properly migrate this information we need to also check system
policies. I moved a bunch of policy resolution code out of the GUI and into
a new package in util/winutil/policy.
Updates #7626
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
James Tucker