tailscale

Commit Graph

Author	SHA1	Message	Date
Brad Fitzpatrick	9b07517f18	wgengine: add Engine.SetLinkChangeCallback Start of making the IPN state machine react to link changes and down its DNS & routes if necessary to unblock proxy resolution (e.g. for transitioning from public to corp networks where the corp network has mandatory proxies and WPAD PAC files that can't be resolved while using the DNS/routes configured previously) This change should be a no-op. Just some callback plumbing.	4 years ago
Brad Fitzpatrick	756d6a72bd	wgengine: lazily create peer wireguard configs more explicitly Rather than consider bigs jumps in last-received-from activity as a signal to possibly reconfigure the set of wireguard peers to have configured, instead just track the set of peers that are currently excluded from the configuration. Easier to reason about. Also adds a bit more logging. This might fix an error we saw on a machine running a recent unstable build: 2020-08-26 17:54:11.528033751 +0000 UTC: 8.6M/92.6M magicsock: [unexpected] lazy endpoint not created for [UcppE], d:42a770f678357249 2020-08-26 17:54:13.691305296 +0000 UTC: 8.7M/92.6M magicsock: DERP packet received from idle peer [UcppE]; created=false 2020-08-26 17:54:13.691383687 +0000 UTC: 8.7M/92.6M magicsock: DERP packet from unknown key: [UcppE] If it does happen again, though, we'll have more logs.	4 years ago
David Crawshaw	dd2c61a519	magicsock: call RequestStatus when DERP connects Second attempt. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
David Crawshaw	a67b174da1	Revert "magicsock: call RequestStatus when DERP connects" Seems to break linux CI builder. Cannot reproduce locally, so attempting a rollback. This reverts commit `cd7bc02ab1`. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
David Crawshaw	cd7bc02ab1	magicsock: call RequestStatus when DERP connects Without this, a freshly started ipn client will be stuck in the "Starting" state until something triggers a call to RequestStatus. Usually a UI does this, but until then we can sit in this state until poked by an external event, as is evidenced by our e2e tests locking up when DERP is attached. (This only recently became a problem when we enabled lazy handshaking everywhere, otherwise the wireugard tunnel creation would also trigger a RequestStatus.) Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
Dmytro Shynkevych	a903d6c2ed	tailcfg, tsdns: derive root domains from list of nodes (#708 ) Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Brad Fitzpatrick	7841c97af5	wgengine: make lazy wireguard on by default It can still be explicitly enabled or disabled via the environment variable, then via control. But the default is to be lazy now.	4 years ago
Brad Fitzpatrick	9337a99dff	tailcfg, wgengine, controlclient: add control-side gating of lazy WG config	4 years ago
Dmytro Shynkevych	1af70e2468	tsdns: delegate requests asynchronously (#687 ) Signed-Off-By: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Brad Fitzpatrick	b97aac1718	net/interfaces: include DefaultRouteInterface in interfaces.State And log it in wgengine on change. Changing bug in #643. Updates #643	4 years ago
Brad Fitzpatrick	84dc891843	cmd/tailscale/cli: add ping subcommand For example: $ tailscale ping -h USAGE ping <hostname-or-IP> FLAGS -c 10 max number of pings to send -stop-once-direct true stop once a direct path is established -verbose false verbose output $ tailscale ping mon.ts.tailscale.com pong from monitoring (100.88.178.64) via DERP(sfo) in 65ms pong from monitoring (100.88.178.64) via DERP(sfo) in 252ms pong from monitoring (100.88.178.64) via [2604:a880:2:d1::36:d001]:41641 in 33ms Fixes #661 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Dmytro Shynkevych	cb01058a53	wgengine: stop giving tsdns a buffer that will be reused Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Brad Fitzpatrick	9a346fd8b4	wgengine,magicsock: fix two lazy wireguard config issues 1) we weren't waking up a discoEndpoint that once existed and went idle for 5 minutes and then got a disco message again. 2) userspaceEngine.noteReceiveActivity had a buggy check; fixed and added a test	4 years ago
Dmytro Shynkevych	78c2e1ff83	tsdns: implement reverse DNS lookups, canonicalize names everywhere. (#640 ) Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Brad Fitzpatrick	2bd9ad4b40	wgengine: fix deadlock between engine and magicsock	4 years ago
Dmytro Shynkevych	28e52a0492	all: dns refactor, add Proxied and PerDomain flags from control (#615 ) Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Brad Fitzpatrick	3e493e0417	wgengine: fix lazy wireguard config bug on sent packet minute+ later A comparison operator was backwards. The bad case went: * device A send packet to B at t=1s * B gets added to A's wireguard config * B gets packet (5 minutes pass) * some other activity happens, causing B to expire to be removed from A's network map, since it's been over 5 minutes since sent or received activity * device A sends packet to B at t=5m1s * normally, B would get added back, but the old send time was not zero (we sent earlier!) and the time comparison was backwards, so we never regenerated the wireguard config. This also refactors the code for legibility and moves constants up top, with comments.	4 years ago
Brad Fitzpatrick	b3fc61b132	wgengine: disable wireguard config trimming for now except iOS w/ many peers Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Dmytro Shynkevych	c7582dc234	ipn: fix netmap change tracking and dns map generation (#609 ) Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Brad Fitzpatrick	16a9cfe2f4	wgengine: configure wireguard peers lazily, as needed wireguard-go uses 3 goroutines per peer (with reasonably large stacks & buffers). Rather than tell wireguard-go about all our peers, only tell it about peers we're actively communicating with. That means we need hooks into magicsock's packet receiving path and tstun's packet sending path to lazily create a wireguard peer on demand from the network map. This frees up lots of memory for iOS (where we have almost nothing left for larger domains with many users). We should ideally do this in wireguard-go itself one day, but that'd be a pretty big change. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	a2267aae99	wgengine: only launch pingers for peers predating the discovery protocol Peers advertising a discovery key know how to speak the discovery protocol and do their own heartbeats to get through NATs and keep NATs open. No need for the pinger except for with legacy peers.	4 years ago
Brad Fitzpatrick	cdfea347d0	wgengine: update for tailscale/wireguard-go API changes * update to new HandshakeDone signature * use new Device.IpcGetOperationFiltered call to avoid sending allowed_ips See `dd6c1c8fe1`	4 years ago
Dmytro Shynkevych	30bbbe9467	wgengine/router: dns: unify on *BSD, multimode on Linux, Magic DNS (#536 ) Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Dmytro Shynkevych	67ebba90e1	tsdns: dual resolution mode, IPv6 support (#526 ) This change adds to tsdns the ability to delegate lookups to upstream nameservers. This is crucial for setting Magic DNS as the system resolver. Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Brad Fitzpatrick	6196b7e658	wgengine/magicsock: change API to not permit disco key changes Generate the disco key ourselves and give out the public half instead. Fixes #525	4 years ago
Dmytro Shynkevych	16b2bbbbbb	wgengine: close in reverse order of bringup Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Brad Fitzpatrick	6f73f2c15a	wgengine, internal/deepprint: replace UAPI usage as hash func; add deepprint The new deepprint package just walks a Go data structure and writes to an io.Writer. It's not pretty like go-spew, etc. We then use it to replace the use of UAPI (which we have a TODO to remove) to generate signatures of data structures to detect whether anything changed (without retaining the old copy). This was necessary because the UAPI conversion ends up trying to do DNS lookups which an upcoming change depends on not happening.	4 years ago
Brad Fitzpatrick	23e74a0f7a	wgengine, magicsock, tstun: don't regularly STUN when idle (mobile only for now) If there's been 5 minutes of inactivity, stop doing STUN lookups. That means NAT mappings will expire, but they can resume later when there's activity again. We'll do this for all platforms later. Updates tailscale/corp#320 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	fe50cd0c48	ipn, wgengine: plumb NetworkMap down to magicsock Now we can have magicsock make decisions based on tailcfg.Debug settings sent by the server. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	53fb25fc2f	all: generate discovery key, plumb it around Not actually used yet. Updates #483	4 years ago
Brad Fitzpatrick	d9054da86a	wgengine: disambiguate Reconfig logging paths	4 years ago
David Anderson	d05b0500ac	wgengine: loop back tuntap packets destined for local IPs. macOS incorrectly sends packets for the local Tailscale IP into our tunnel interface. We have to turn the packets around and send them back to the kernel. Fixes tailscale/corp#189. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Avery Pennarun	51d176ecff	wgengine: Remove leftover debug message. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Dmytro Shynkevych	511840b1f6	tsdns: initial implementation of a Tailscale DNS resolver (#396 ) Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Dmytro Shynkevych	059b1d10bb	wgengine/packet: refactor and expose UDP header marshaling (#408 ) Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Brad Fitzpatrick	722673f307	Update go4.org/mem, adjust to revised API.	4 years ago
Avery Pennarun	e46238a2af	wgengine: separately dedupe wireguard configs and router configs. Otherwise iOS/macOS will reconfigure their routing every time anything minor changes in the netmap (in particular, endpoints and DERP homes), which is way too often. Some users reported "network reconfigured" errors from Chrome when this happens. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	f0b6ba78e8	wgengine: don't pass nil router.Config objects. These are hard for swift to decode in the iOS app. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
David Crawshaw	cf5d25e15b	wgengine: ensure pingers are gone before returning from Close We canceled the pingers in Close, but didn't wait around for their goroutines to be cleaned up. This caused the ipn/e2e_test to catch pingers in its resource leak check. This commit introduces an object, but also simplifies the semantics around the pinger's cancel functions. They no longer need to be called while holding the mutex. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
Brad Fitzpatrick	43ded2b581	wgengine/packet: add some tests, more docs, minor Go style, performance changes	5 years ago
Brad Fitzpatrick	e6b84f2159	all: make client use server-provided DERP map, add DERP region support Instead of hard-coding the DERP map (except for cmd/tailscale netcheck for now), get it from the control server at runtime. And make the DERP map support multiple nodes per region with clients picking the first one that's available. (The server will balance the order presented to clients for load balancing) This deletes the stunner package, merging it into the netcheck package instead, to minimize all the config hooks that would've been required. Also fix some test flakes & races. Fixes #387 (Don't hard-code the DERP map) Updates #388 (Add DERP region support) Fixes #399 (wgengine: flaky tests) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Dmytro Shynkevych	635f7b99f1	wgengine: pass tun.NativeDevice to router Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	5 years ago
Avery Pennarun	08acb502e5	Add tstest.PanicOnLog(), and fix various problems detected by this. If a test calls log.Printf, 'go test' horrifyingly rearranges the output to no longer be in chronological order, which makes debugging virtually impossible. Let's stop that from happening by making log.Printf panic if called from any module, no matter how deep, during tests. This required us to change the default error handler in at least one http.Server, as well as plumbing a bunch of logf functions around, especially in magicsock and wgengine, but also in logtail and backoff. To add insult to injury, 'go test' also rearranges the output when a parent test has multiple sub-tests (all the sub-test's t.Logf is always printed after all the parent tests t.Logf), so we need to screw around with a special Logf that can point at the "current" t (current_t.Logf) in some places. Probably our entire way of using subtests is wrong, since 'go test' would probably like to run them all in parallel if you called t.Parallel(), but it definitely can't because the're all manipulating the shared state created by the parent test. They should probably all be separate toplevel tests instead, with common setup/teardown logic. But that's a job for another time. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Dmytro Shynkevych	33b2f30cea	wgengine: wrap tun.Device to support filtering and packet injection (#358 ) Right now, filtering and packet injection in wgengine depend on a patch to wireguard-go that probably isn't suitable for upstreaming. This need not be the case: wireguard-go/tun.Device is an interface. For example, faketun.go implements it to mock a TUN device for testing. This patch implements the same interface to provide filtering and packet injection at the tunnel device level, at which point the wireguard-go patch should no longer be necessary. This patch has the following performance impact on i7-7500U @ 2.70GHz, tested in the following namespace configuration: ┌────────────────┐ ┌─────────────────────────────────┐ ┌────────────────┐ │ $ns1 │ │ $ns0 │ │ $ns2 │ │ client0 │ │ tailcontrol, logcatcher │ │ client1 │ │ ┌─────┐ │ │ ┌──────┐ ┌──────┐ │ │ ┌─────┐ │ │ │vethc│───────┼────┼──│vethrc│ │vethrs│──────┼─────┼──│veths│ │ │ ├─────┴─────┐ │ │ ├──────┴────┐ ├──────┴────┐ │ │ ├─────┴─────┐ │ │ │10.0.0.2/24│ │ │ │10.0.0.1/24│ │10.0.1.1/24│ │ │ │10.0.1.2/24│ │ │ └───────────┘ │ │ └───────────┘ └───────────┘ │ │ └───────────┘ │ └────────────────┘ └─────────────────────────────────┘ └────────────────┘ Before: --------------------------------------------------- \| TCP send \| UDP send \| \|------------------------\|------------------------\| \| 557.0 (±8.5) Mbits/sec \| 3.03 (±0.02) Gbits/sec \| --------------------------------------------------- After: --------------------------------------------------- \| TCP send \| UDP send \| \|------------------------\|------------------------\| \| 544.8 (±1.6) Mbits/sec \| 3.13 (±0.02) Gbits/sec \| --------------------------------------------------- The impact on receive performance is similar. Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	5 years ago
David Anderson	9ccbcda612	wgengine/router: rename config.Settings to config.Config, make pointer. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	72cae5504c	wgengine: generate and plumb router.Settings in from ipn. This saves a layer of translation, and saves us having to pass in extra bits and pieces of the netmap and prefs to wgengine. Now it gets one Wireguard config, and one OS network stack config. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	bfdc8175b1	wgengine/router: add a setting to disable SNAT for subnet routes. Part of #320. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	e83d02ffd1	wgengine: don't double-close tundev on setup error. Part of #368. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	e16f7e48a3	wgengine: simplify wgcfg.* to netaddr.* conversion. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	ccbd0937d0	wgengine: avoid v6 mapped v4 IPs when converting to netaddr types. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago

1 2

98 Commits (c22wen/route-addr)