tailcfg: support LogUploadAuth and empty DataPlaneAuditLogID

This updates the Tailscale protocol to support the following:
* Network flow logs to be uploaded with a custom HTTP Authorization.
* Network flow logs to be uploaded under a TailnetID
without also needing to be associated with a particular NodeID.
* Network flow logs to to exclude embedded node information
based on a capability flag (see #17668).

Updates tailscale/corp#33352

Signed-off-by: Joe Tsai <joetsai@digital-static.net>

control/controlclient/map.go

@@ -92,6 +92,7 @@ type mapSession struct {
 	collectServices        bool
 	lastDomain             string
 	lastDomainAuditLogID   string
+	lastLogUploadAuth      string
 	lastHealth             []string
 	lastDisplayMessages    map[tailcfg.DisplayMessageID]tailcfg.DisplayMessage
 	lastPopBrowserURL      string
@@ -413,6 +414,9 @@ func (ms *mapSession) updateStateFromResponse(resp *tailcfg.MapResponse) {
 	if resp.DomainDataPlaneAuditLogID != "" {
 		ms.lastDomainAuditLogID = resp.DomainDataPlaneAuditLogID
 	}
+	if resp.LogUploadAuth != "" {
+		ms.lastLogUploadAuth = resp.LogUploadAuth
+	}
 	if resp.Health != nil {
 		ms.lastHealth = resp.Health
 	}
@@ -872,6 +876,7 @@ func (ms *mapSession) netmap() *netmap.NetworkMap {
 		UserProfiles:      make(map[tailcfg.UserID]tailcfg.UserProfileView),
 		Domain:            ms.lastDomain,
 		DomainAuditLogID:  ms.lastDomainAuditLogID,
+		LogUploadAuth:     ms.lastLogUploadAuth,
 		DNS:               *ms.lastDNSConfig,
 		PacketFilter:      ms.lastParsedPacketFilter,
 		PacketFilterRules: ms.lastPacketFilterRules,

logtail/config.go

@@ -30,6 +30,7 @@ type Config struct {
 	PrivateID      logid.PrivateID // private ID for the primary log stream
 	CopyPrivateID  logid.PrivateID // private ID for a log stream that is a superset of this log stream
 	BaseURL        string          // if empty defaults to "https://log.tailscale.com"
+	HTTPAuth       string          // if set, specifies the Authorization HTTP header to send
 	HTTPC          *http.Client    // if empty defaults to http.DefaultClient
 	SkipClientTime bool            // if true, client_time is not written to logs
 	LowMemory      bool            // if true, logtail minimizes memory use

logtail/logtail.go

@@ -104,6 +104,7 @@ func NewLogger(cfg Config, logf tslogger.Logf) *Logger {
 		privateID:      cfg.PrivateID,
 		stderr:         cfg.Stderr,
 		stderrLevel:    int64(cfg.StderrLevel),
+		httpAuth:       cfg.HTTPAuth,
 		httpc:          cfg.HTTPC,
 		url:            cfg.BaseURL + "/c/" + cfg.Collection + "/" + cfg.PrivateID.String() + urlSuffix,
 		lowMem:         cfg.LowMemory,
@@ -144,6 +145,7 @@ func NewLogger(cfg Config, logf tslogger.Logf) *Logger {
 type Logger struct {
 	stderr         io.Writer
 	stderrLevel    int64 // accessed atomically
+	httpAuth       string
 	httpc          *http.Client
 	url            string
 	lowMem         bool
@@ -489,6 +491,9 @@ func (lg *Logger) upload(ctx context.Context, body []byte, origlen int) (retryAf
 		// TODO record logs to disk
 		panic("logtail: cannot build http request: " + err.Error())
 	}
+	if lg.httpAuth != "" {
+		req.Header.Add("Authorization", lg.httpAuth)
+	}
 	if origlen != -1 {
 		req.Header.Add("Content-Encoding", "zstd")
 		req.Header.Add("Orig-Content-Length", strconv.Itoa(origlen))

tailcfg/tailcfg.go

@@ -177,7 +177,8 @@ type CapabilityVersion int
 //   - 128: 2025-10-02: can handle C2N /debug/health.
 //   - 129: 2025-10-04: Fixed sleep/wake deadlock in magicsock when using peer relay (PR #17449)
 //   - 130: 2025-10-06: client can send key.HardwareAttestationPublic and key.HardwareAttestationKeySignature in MapRequest
-const CurrentCapabilityVersion CapabilityVersion = 130
+//   - 131: 2025-10-28: client is able to use MapResponse.LogUploadAuth when uploading logs, allow empty Node.DataPlaneAuditLogID, and disable embedded node info
+const CurrentCapabilityVersion CapabilityVersion = 131
 
 // ID is an integer ID for a user, node, or login allocated by the
 // control plane.
@@ -465,6 +466,8 @@ type Node struct {
 	ComputedNameWithHost    string `json:",omitempty"` // either "ComputedName" or "ComputedName (computedHostIfDifferent)", if computedHostIfDifferent is set
 
 	// DataPlaneAuditLogID is the per-node logtail ID used for data plane audit logging.
+	// If empty, but [MapResponse.DomainDataPlaneAuditLogID] is non-empty,
+	// then logs are only uploaded under the domain-specific log ID.
 	DataPlaneAuditLogID string `json:",omitempty"`
 
 	// Expired is whether this node's key has expired. Control may send
@@ -2135,6 +2138,9 @@ type MapResponse struct {
 	// used when writing data plane audit logs.
 	DomainDataPlaneAuditLogID string `json:",omitempty"`
 
+	// LogUploadAuth, if non-empty, is the HTTP Authorization used when uploading logs.
+	LogUploadAuth string `json:",omitempty"`
+
 	// Debug is normally nil, except for when the control server
 	// is setting debug settings on a node.
 	Debug *Debug `json:",omitempty"`
@@ -2598,6 +2604,9 @@ const (
 	// NodeAttrLogExitFlows enables exit node destinations in network flow logs.
 	NodeAttrLogExitFlows NodeCapability = "log-exit-flows"
 
+	// NodeAttrExcludeNodeInfoInFlows disables embedded node information in network flow logs.
+	NodeAttrExcludeNodeInfoInFlows NodeCapability = "exclude-node-info-in-flows"
+
 	// NodeAttrAutoExitNode permits the automatic exit nodes feature.
 	NodeAttrAutoExitNode NodeCapability = "auto-exit-node"
 

tailcfg/tailcfg_view.go

@@ -318,6 +318,8 @@ func (v NodeView) ComputedName() string { return v.ж.ComputedName }
 func (v NodeView) ComputedNameWithHost() string { return v.ж.ComputedNameWithHost }
 
 // DataPlaneAuditLogID is the per-node logtail ID used for data plane audit logging.
+// If empty, but [MapResponse.DomainDataPlaneAuditLogID] is non-empty,
+// then logs are only uploaded under the domain-specific log ID.
 func (v NodeView) DataPlaneAuditLogID() string { return v.ж.DataPlaneAuditLogID }
 
 // Expired is whether this node's key has expired. Control may send

types/netmap/netmap.go

@@ -71,6 +71,9 @@ type NetworkMap struct {
 	// If this is empty, then data-plane audit logging is disabled.
 	DomainAuditLogID string
 
+	// LogUploadAuth, if non-empty, is the HTTP Authorization used when uploading logs.
+	LogUploadAuth string
+
 	// UserProfiles contains the profile information of UserIDs referenced
 	// in SelfNode and Peers.
 	UserProfiles map[tailcfg.UserID]tailcfg.UserProfileView

types/netmap/nodemut.go

@@ -167,6 +167,7 @@ func mapResponseContainsNonPatchFields(res *tailcfg.MapResponse) bool {
 		res.SSHPolicy != nil ||
 		res.TKAInfo != nil ||
 		res.DomainDataPlaneAuditLogID != "" ||
+		res.LogUploadAuth != "" ||
 		res.Debug != nil ||
 		res.ControlDialPlan != nil ||
 		res.ClientVersion != nil ||

wgengine/netlog/netlog.go

@@ -33,6 +33,7 @@ import (
 	"tailscale.com/util/eventbus"
 	"tailscale.com/util/set"
 	"tailscale.com/wgengine/router"
+	"tailscale.com/wgengine/wgcfg"
 
 	jsonv2 "github.com/go-json-experiment/json"
 	"github.com/go-json-experiment/json/jsontext"
@@ -87,8 +88,6 @@ func (nl *Logger) Running() bool {
 	return nl.shutdownLocked != nil
 }
 
-var testClient *http.Client
-
 // Startup starts an asynchronous network logger that monitors
 // statistics for the provided tun and/or sock device.
 //
@@ -115,7 +114,7 @@ var testClient *http.Client
 // The sock is used to populated the PhysicalTraffic field in [netlogtype.Message].
 //
 // The netMon parameter is optional; if non-nil it's used to do faster interface lookups.
-func (nl *Logger) Startup(logf logger.Logf, nm *netmap.NetworkMap, nodeLogID, domainLogID logid.PrivateID, tun, sock Device, netMon *netmon.Monitor, health *health.Tracker, bus *eventbus.Bus, logExitFlowEnabledEnabled bool) error {
+func (nl *Logger) Startup(logf logger.Logf, conf wgcfg.NetworkLoggingConfig, nm *netmap.NetworkMap, tun, sock Device, netMon *netmon.Monitor, health *health.Tracker, bus *eventbus.Bus) error {
 	nl.mu.Lock()
 	defer nl.mu.Unlock()
 
@@ -128,17 +127,20 @@ func (nl *Logger) Startup(logf logger.Logf, nm *netmap.NetworkMap, nodeLogID, do
 	if logf == nil {
 		logf = log.Printf
 	}
-	httpc := &http.Client{Transport: logpolicy.NewLogtailTransport(logtail.DefaultHost, netMon, health, logf)}
-	if testClient != nil {
-		httpc = testClient
+	privID, copyID := conf.NodeID, conf.TailnetID
+	if conf.NodeID.IsZero() {
+		// If NodeID is zero, then only upload for the specified TailnetID.
+		privID, copyID = conf.TailnetID, logid.PrivateID{}
 	}
+	httpc := &http.Client{Transport: logpolicy.NewLogtailTransport(logtail.DefaultHost, netMon, health, logf)}
 	logger := logtail.NewLogger(logtail.Config{
 		Collection:    "tailtraffic.log.tailscale.io",
-		PrivateID:     nodeLogID,
-		CopyPrivateID: domainLogID,
+		PrivateID:     privID,
+		CopyPrivateID: copyID,
 		Bus:           bus,
 		Stderr:        io.Discard,
 		CompressLogs:  true,
+		HTTPAuth:      conf.HTTPAuth,
 		HTTPC:         httpc,
 		// TODO(joetsai): Set Buffer? Use an in-memory buffer for now.
 
@@ -166,7 +168,7 @@ func (nl *Logger) Startup(logf logger.Logf, nm *netmap.NetworkMap, nodeLogID, do
 	go func(recordsChan chan record) {
 		defer close(recorderDone)
 		for rec := range recordsChan {
-			msg := rec.toMessage(false, !logExitFlowEnabledEnabled)
+			msg := rec.toMessage(conf.ExcludeNodeInfo, conf.AnonymizeExitTraffic)
 			if b, err := jsonv2.Marshal(msg, jsontext.AllowInvalidUTF8(true)); err != nil {
 				if nl.logf != nil {
 					nl.logf("netlog: json.Marshal error: %v", err)

wgengine/userspace.go

@@ -1006,12 +1006,12 @@ func (e *userspaceEngine) Reconfig(cfg *wgcfg.Config, routerCfg *router.Config,
 	if !engineChanged && !routerChanged && !dnsChanged && !listenPortChanged && !isSubnetRouterChanged && !peerMTUChanged {
 		return ErrNoChanges
 	}
-	newLogIDs := cfg.NetworkLogging
-	oldLogIDs := e.lastCfgFull.NetworkLogging
-	netLogIDsNowValid := !newLogIDs.NodeID.IsZero() && !newLogIDs.DomainID.IsZero()
-	netLogIDsWasValid := !oldLogIDs.NodeID.IsZero() && !oldLogIDs.DomainID.IsZero()
-	netLogIDsChanged := netLogIDsNowValid && netLogIDsWasValid && newLogIDs != oldLogIDs
-	netLogRunning := netLogIDsNowValid && !routerCfg.Equal(&router.Config{})
+	oldLogConf := e.lastCfgFull.NetworkLogging
+	newLogConf := cfg.NetworkLogging
+	netLogWasValid := !oldLogConf.TailnetID.IsZero()
+	netLogNowValid := !newLogConf.TailnetID.IsZero()
+	netLogChanged := netLogWasValid && netLogNowValid && newLogConf != oldLogConf
+	netLogRunning := netLogNowValid && !routerCfg.Equal(&router.Config{})
 	if !buildfeatures.HasNetLog || envknob.NoLogsNoSupport() {
 		netLogRunning = false
 	}
@@ -1069,7 +1069,7 @@ func (e *userspaceEngine) Reconfig(cfg *wgcfg.Config, routerCfg *router.Config,
 
 	// Shutdown the network logger because the IDs changed.
 	// Let it be started back up by subsequent logic.
-	if buildfeatures.HasNetLog && netLogIDsChanged && e.networkLogger.Running() {
+	if buildfeatures.HasNetLog && netLogChanged && e.networkLogger.Running() {
 		e.logf("wgengine: Reconfig: shutting down network logger")
 		ctx, cancel := context.WithTimeout(context.Background(), networkLoggerUploadTimeout)
 		defer cancel()
@@ -1081,11 +1081,8 @@ func (e *userspaceEngine) Reconfig(cfg *wgcfg.Config, routerCfg *router.Config,
 	// Startup the network logger.
 	// Do this before configuring the router so that we capture initial packets.
 	if buildfeatures.HasNetLog && netLogRunning && !e.networkLogger.Running() {
-		nid := cfg.NetworkLogging.NodeID
-		tid := cfg.NetworkLogging.DomainID
-		logExitFlowEnabled := cfg.NetworkLogging.LogExitFlowEnabled
-		e.logf("wgengine: Reconfig: starting up network logger (node:%s tailnet:%s)", nid.Public(), tid.Public())
-		if err := e.networkLogger.Startup(e.logf, nm, nid, tid, e.tundev, e.magicConn, e.netMon, e.health, e.eventBus, logExitFlowEnabled); err != nil {
+		e.logf("wgengine: Reconfig: starting up network logger (tailnet:%s node:%s)", cfg.NetworkLogging.TailnetID.Public(), cfg.NetworkLogging.NodeID.Public())
+		if err := e.networkLogger.Startup(e.logf, cfg.NetworkLogging, nm, e.tundev, e.magicConn, e.netMon, e.health, e.eventBus); err != nil {
 			e.logf("wgengine: Reconfig: error starting up network logger: %v", err)
 		}
 		e.networkLogger.ReconfigRoutes(routerCfg)

wgengine/wgcfg/config.go

@@ -23,14 +23,26 @@ type Config struct {
 	DNS        []netip.Addr
 	Peers      []Peer
 
-	// NetworkLogging enables network logging.
-	// It is disabled if either ID is the zero value.
-	// LogExitFlowEnabled indicates whether or not exit flows should be logged.
-	NetworkLogging struct {
-		NodeID             logid.PrivateID
-		DomainID           logid.PrivateID
-		LogExitFlowEnabled bool
+	NetworkLogging NetworkLoggingConfig
 }
+
+// NetworkLoggingConfig configures network flow logging.
+type NetworkLoggingConfig struct {
+	// TailnetID is the Tailnet-specific log ID to associate network flow logs with.
+	// If non-zero, then network flow logging is enabled.
+	TailnetID logid.PrivateID
+	// NodeID is the node-specific log ID to associate network flow logs with.
+	// It may be zero while TailnetID is non-zero.
+	NodeID logid.PrivateID
+	// HTTPAuth is an optional HTTP Authorization header to upload log with.
+	HTTPAuth string
+
+	// AnonymizeExitTraffic specifies whether to anonymize exit node traffic.
+	// Enable this to better preserve privacy.
+	AnonymizeExitTraffic bool
+	// ExcludeNodeInfo specifies whether to exclude node information.
+	// Enable this to reduce the size of each log message.
+	ExcludeNodeInfo bool
 }
 
 func (c *Config) Equal(o *Config) bool {

wgengine/wgcfg/nmcfg/nmcfg.go

@@ -52,20 +52,23 @@ func WGCfg(pk key.NodePrivate, nm *netmap.NetworkMap, logf logger.Logf, flags ne
 	// Setup log IDs for data plane audit logging.
 	if nm.SelfNode.Valid() {
 		canNetworkLog := nm.SelfNode.HasCap(tailcfg.CapabilityDataPlaneAuditLogs)
-		logExitFlowEnabled := nm.SelfNode.HasCap(tailcfg.NodeAttrLogExitFlows)
-		if canNetworkLog && nm.SelfNode.DataPlaneAuditLogID() != "" && nm.DomainAuditLogID != "" {
-			nodeID, errNode := logid.ParsePrivateID(nm.SelfNode.DataPlaneAuditLogID())
-			if errNode != nil {
-				logf("[v1] wgcfg: unable to parse node audit log ID: %v", errNode)
-			}
+		if canNetworkLog && nm.DomainAuditLogID != "" {
 			domainID, errDomain := logid.ParsePrivateID(nm.DomainAuditLogID)
 			if errDomain != nil {
 				logf("[v1] wgcfg: unable to parse domain audit log ID: %v", errDomain)
 			}
+			nodeID, errNode := logid.ParsePrivateID(nm.SelfNode.DataPlaneAuditLogID())
+			if nm.SelfNode.DataPlaneAuditLogID() == "" {
+				errNode = nil // may be empty while DomainAuditLogID is non-empty
+			} else if errNode != nil {
+				logf("[v1] wgcfg: unable to parse node audit log ID: %v", errNode)
+			}
 			if errNode == nil && errDomain == nil {
+				cfg.NetworkLogging.TailnetID = domainID
 				cfg.NetworkLogging.NodeID = nodeID
-				cfg.NetworkLogging.DomainID = domainID
-				cfg.NetworkLogging.LogExitFlowEnabled = logExitFlowEnabled
+				cfg.NetworkLogging.HTTPAuth = nm.LogUploadAuth
+				cfg.NetworkLogging.AnonymizeExitTraffic = !nm.SelfNode.HasCap(tailcfg.NodeAttrLogExitFlows)     // anonymize by default
+				cfg.NetworkLogging.ExcludeNodeInfo = nm.SelfNode.HasCap(tailcfg.NodeAttrExcludeNodeInfoInFlows) // include by default
 			}
 		}
 	}

wgengine/wgcfg/wgcfg_clone.go

@@ -9,7 +9,6 @@ import (
 	"net/netip"
 
 	"tailscale.com/types/key"
-	"tailscale.com/types/logid"
 	"tailscale.com/types/ptr"
 )
 
@@ -39,11 +38,7 @@ var _ConfigCloneNeedsRegeneration = Config(struct {
 	MTU            uint16
 	DNS            []netip.Addr
 	Peers          []Peer
-	NetworkLogging struct {
-		NodeID             logid.PrivateID
-		DomainID           logid.PrivateID
-		LogExitFlowEnabled bool
-	}
+	NetworkLogging NetworkLoggingConfig
 }{})
 
 // Clone makes a deep copy of Peer.