Until Ansible 2.9 it looks like ansible_become_password had higher priority.
From Ansible 2.10 ansible_become_pass has higher priority [1]. Mitogen was not
respecting this.
I may need to rework this further, instatiating the become plugin may have
slowed down execution.
[1] Based on testing with
```
[ubuntus]
become-pass-pass ansible_become_pass=1234
become-pass-password ansible_become_password=1234
become-pass-both ansible_become_password=wrong ansible_become_pass=1234
[ubuntus:vars]
ansible_host=ubuntu2004.local
ansible_user=ubuntu
```
```
- hosts: ubuntus
gather_facts: false
become: true
tasks:
- ping:
```
This reapplies an earlier change, when this plugin was first introduced to
Mitogen. The plugin was updated to fix
[DEPRECATION WARNING]: The '_remote_checksum()' method is deprecated.
I've elected to short-circuit the if statemtn logic, rather than
deleting/unindenting, to make the code delta much smaller. This should make it
easier to maintain/update.
Fixes#915
Attempt to fix
Collecting hdrhistogram==0.6.1 (from -r tests/ansible/requirements.txt
(line 2))
Downloading
2422ad2ad90047d3b9f73061e8696f/hdrhistogram-0.6.1.tar.gz
(61kB)
Complete output from command python setup.py egg_info:
Couldn't find index page for 'pbr' (maybe misspelled?)
sources=['src/python-codec.c'])]
File "/usr/lib/python3.5/distutils/core.py", line 108, in setup
_setup_distribution = dist = klass(attrs)
File "/tmp/venv/lib/python3.5/site-packages/setuptools/dist.py",
line 315, in __init__
self.fetch_build_eggs(attrs['setup_requires'])
File "/tmp/venv/lib/python3.5/site-packages/setuptools/dist.py",
line 361, in fetch_build_eggs
replace_conflicting=True,
File
"/tmp/venv/lib/python3.5/site-packages/pkg_resources/__init__.py", line
850, in resolve
dist = best[req.key] = env.best_match(req, ws, installer)
File
"/tmp/venv/lib/python3.5/site-packages/pkg_resources/__init__.py", line
1122, in best_match
return self.obtain(req, installer)
File
"/tmp/venv/lib/python3.5/site-packages/pkg_resources/__init__.py", line
1134, in obtain
return installer(requirement)
File "/tmp/venv/lib/python3.5/site-packages/setuptools/dist.py",
line 429, in fetch_build_egg
return cmd.easy_install(req)
File
"/tmp/venv/lib/python3.5/site-packages/setuptools/command/easy_install.py",
line 659, in easy_install
raise DistutilsError(msg)
distutils.errors.DistutilsError: Could not find suitable
distribution for Requirement.parse('pbr')
From cpuset(7):
> For masks longer than one word, a comma separator is used between
> words. Words are displayed in big-endian order, which has the most
> significant bit first. The hex digits within a word are also in
> big-endian order.
A few changes are bundled in this
- Ansible 2.10.x and Mitogen 0.3.x are used to build nearly all images
(Ansile 2.3.x is retained for CentOS 5, because it uses Python 2.4).
- Tox is used to install/run Ansible, replacing build_docker_images.py
- A static inventory, identifying containers by name rather than ID.
- debian-test image is renamed to debian9-test
- debian9-test image is now based on debian:9
- centos6-test image is now based on moreati/centos6-vault
following the same scheme as centos5-test.
- Images are now uploaded to Amazon Elastic Container Registry (ECR).
See #809.
- Debian recommended packages aren't installed (e.g. build-essential)
- Python 2.x and Python 3.x are installed wherever available.
- Python Virtualenv is installed wherever available.
The Travis Linux distribution must be upgraded because the Trusty
(Ubuntu 14.04) image does not have Python 3.9. Xenial (Ubuntu 16.04) is
the earliest version that offers Python 3.9.
I have not chosen a later release, in order to aid restoration of Python
2.4 - 2.6 tests.
The ansible_mitogen test suite takes over an hour when Ansible is not
accelerated by Mitogen. This change aims to reduce that by skipping
tests with a large number of iterations when the linear strategy is
chosen.
The tagged tests are intended to uncover Mitogen resource leaks. Since
Mitogen is not invoked when strategy=linear, the slight reduction in
test coverage is an acceptable trade off.
These are not part of the official testing regime (tests run for pull
requests). I find them convenient for local development.
Limitations
- Python 2.7+ only. No Python 2.4, 2.5, or 2.6.
- Requires Pythons pre-installed (e.g. DeadSnakes, pyenv)
- No coverage of alternate controller OS (e.g. MacOS)
The environments tested by default are
py27-mode_ansible-ansible2.10
py36-mode_ansible-ansible2.10
py39-mode_ansible-ansible2.10
py27-mode_mitogen
py36-mode_mitogen
py39-mode_mitogen
py27-mode_mitogen-distro_centos7
py36-mode_mitogen-distro_centos7
py39-mode_mitogen-distro_centos7
The environment variable DISTRO is used to set the target Docker image
used when running the Mitogen unit tests. DISTROS is used for the
Ansible integration tests. VER sets the version of Ansible that is
installed on the controller.
When MODE=Mitogen
- there is no need to set VER, because nothing that installs Ansible
- it does not make sense to set DISTROS.
CALLBACK_VERSION et al are documented as required in
https://docs.ansible.com/ansible/2.10/dev_guide/developing_plugins.html#callback-plugins.
The need for document_fragment is noted in
cfa8075537/lib/ansible/plugins/callback/default.py (L28-L32)Fixes#758
This addresses the following error, seen while running
`ansible_tests.py`.
```
TASK [Gathering Facts gather_timeout=10, gather_subset=['all']]
****************
task path:
/home/alex/src/mitogen/tests/ansible/regression/issue_109__target_has_old_ansible_installed.yml:4
[WARNING]: Failure using method (v2_runner_on_start) in callback plugin
(<ansible.plugins.callback.nice_stdout.CallbackModule object at
0x7f76b3dad090>): 'show_per_host_start'
Callback Exception:
File
"/home/alex/src/mitogen/.tox/py27-ansible2.10/lib/python2.7/site-packages/ansible/executor/task_queue_manager.py",
line 372, in send_callback
method(*new_args, **kwargs)
File
"/home/alex/src/mitogen/.tox/py27-ansible2.10/lib/python2.7/site-packages/ansible/plugins/callback/default.py",
line 240, in v2_runner_on_start
if self.get_option('show_per_host_start'):
File
"/home/alex/src/mitogen/.tox/py27-ansible2.10/lib/python2.7/site-packages/ansible/plugins/callback/__init__.py",
line 91, in get_option
return self._plugin_options[k]
Callback Exception:
File
"/home/alex/src/mitogen/.tox/py27-ansible2.10/lib/python2.7/site-packages/ansible/executor/task_queue_manager.py",
line 372, in send_callback
method(*new_args, **kwargs)
File
"/home/alex/src/mitogen/.tox/py27-ansible2.10/lib/python2.7/site-packages/ansible/plugins/callback/default.py",
line 240, in v2_runner_on_start
if self.get_option('show_per_host_start'):
File
"/home/alex/src/mitogen/.tox/py27-ansible2.10/lib/python2.7/site-packages/ansible/plugins/callback/__init__.py",
line 91, in get_option
return self._plugin_options[k]
[task 339882] 00:00:08.172036 D ansible_mitogen.affinity: CPU mask for
WorkerProcess: 0x000004
Callback Exception:
File
"/home/alex/src/mitogen/.tox/py27-ansible2.10/lib/python2.7/site-packages/ansible/executor/task_queue_manager.py",
line 372, in send_callback
method(*new_args, **kwargs)
File
"/home/alex/src/mitogen/.tox/py27-ansible2.10/lib/python2.7/site-packages/ansible/plugins/callback/default.py",
line 240, in v2_runner_on_start
if self.get_option('show_per_host_start'):
File
"/home/alex/src/mitogen/.tox/py27-ansible2.10/lib/python2.7/site-packages/ansible/plugins/callback/__init__.py",
line 91, in get_option
return self._plugin_options[k]
```
Alex Willmer