This fix adds ability to set MAC address maunally. Before adding
any MAC address, the value is validated. If value is not valid, then
MAC address is set to vCenter generated MAC address.
Also, added integration tests for this change.
Fixes: #21161
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Add new filter to parse xml output for network use cases
Fixes#31026
* Add parse_xml filter
* Add documentation for parse_xml filter
* Edited for clarity.
* Fix review comment and add unit tests
* Fix unit test CI failure
* Fix CI issues
* Fix unit test failures
* Fix review comments
* More copy edits.
* Adding RPC attribute arguments to `junos_rpc` network module.
* Specifying module argument version.
* Fixing DOCUMENTATION block.
* First attempt at new test fixture.
* Updated RPC_CLI_MAP.
* Use `result` instead of `reply`.
* Added eagerzeroedthick disk option to disk spec
* Updated docstrings for vmware_guest disk
* VMware: Integration test for disk type
Signed-off-by: Steve Jacobs <sjacobs@brokencrew.com>
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Adds facts about datastores, esxi_host, vm files, ha state, question, is_template, consolidation status and hw_files. Also, adds integration tests for vmware fact enhancement.
This module can be used to manage guests on a vCMP provisioned BIG-IP.
vCMP is a hardware-only feature, therefore this module cannot be used
on the VE editions of BIG-IP.
* move set_module_args to units.modules.utils
* unit tests: reuse set_module_args
* unit tests: mock exit/fail_json in module.utils.ModuleTestCase
* unit tests: use module.utils.ModuleTestCase
* unit tests: fix 'import shadowed by loop variable'
* Add integration test suite for ec2_vpc_subnet
* wrap boto3 connection in try/except
update module documentation and add RETURN docs
add IPv6 support to VPC subnet module
rename ipv6cidr to ipv6_cidr, use required_if for parameter testing, update some failure messages to be more descriptive
DryRun mode was removed from this function a while ago but exception handling was still checking for it, removed
add wait and timeout for subnet creation process
fixup the ipv6 cidr disassociation logic a bit per review
update RETURN values per review
added module parameter check
removed DryRun parameter from boto3 call since it would always be false here
fix subnet wait loop
add a purge_tags parameter, fix the ensure_tags function, update to use compare_aws_tags func
fix tags type error per review
remove **kwargs use in create_subnet function per review
* rebased on #31870, fixed merge conflicts, and updated error messages
* fixes to pass tests
* add test for failure on invalid ipv6 block and update tags test for purge_tags=true function
* fix pylint issue
* fix exception handling error when run with python3
* add ipv6 tests and fix module code
* Add permissions to hacking/aws_config/testing_policies/ec2-policy.json for adding IPv6 cidr blocks to VPC and subnets
* fix type in tests and update assert conditional to check entire returned value
* add AWS_SESSION_TOKEN into environment for aws cli commands to work in CI
* remove key and value options from call to boto3_tag_list_to_ansible_dict
* remove wait loop and use boto3 EC2 waiter
* remove unused register: result vars
* revert az argument default value to original setting default=None
* included inventory and callback in new config
allow inventory to be configurable
updated connection options settings
also updated winrm to work with new configs
removed now obsolete set_host_overrides
added notes for future bcoca, current one is just punting, it's future's problem
updated docs per feedback
added remove group/host methods to inv data
moved fact cache from data to constructed
cleaner/better options
fix when vars are added
extended ignore list to config dicts
updated paramiko connection docs
removed options from base that paramiko already handles
left the look option as it is used by other plugin types
resolve delegation
updated cache doc options
fixed test_script
better fragment merge for options
fixed proxy command
restore ini for proxy
normalized options
moved pipelining to class
updates for host_key_checking
restructured mixins
* fix typo
* Allow backoff for describe_subnets
Improve exception handling to latest standards
* Add integration test suite for ec2_vpc_subnet
* Add test for creating subnet without AZ
Fix bug identified by test
Fixes#31905
* Several tests were marked as FIXME and should have been fixed with
the boto3 move.
* Improved tags output. Add purge_tags option (default: no)
* Allow description and tags update
* Return launch_permissions
* Allow empty launch permissions for image creation
* Empty launch permissions should work the same way for image
creation as no launch permissions
* Cope with ephemeral devices in AMI block device mapping
* Ephemeral devices can appear in AMI block devices, and this information should be returned
* Fix notation for creating sets from comprehensions
This fix adds new fact - 'Cores Per Socket' about vmware guest machine.
Also, adds integration test for this change.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Fix vault --ask-vault-pass with no tty
2.4.0 added a check for isatty() that would skip setting up interactive
vault password prompts if not running on a tty.
But... getpass.getpass() will fallback to reading from stdin if
it gets that far without a tty. Since 2.4.0 skipped the interactive
prompts / getpass.getpass() in that case, it would never get a chance
to fall back to stdin.
So if 'echo $VAULT_PASSWORD| ansible-playbook --ask-vault-pass site.yml'
was ran without a tty (ie, from a jenkins job or via the vagrant
ansible provisioner) the 2.4 behavior was different than 2.3. 2.4
would never read the password from stdin, resulting in a vault password
error like:
ERROR! Attempting to decrypt but no vault secrets found
Fix is just to always call the interactive password prompts based
on getpass.getpass() on --ask-vault-pass or --vault-id @prompt and
let getpass sort it out.
* up test_prompt_no_tty to expect prompt with no tty
We do call the PromptSecret class if there is no tty, but
we are back to expecting it to read from stdin in that case.
* Fix logic for when to auto-prompt vault pass
If --ask-vault-pass is used, then pretty much always
prompt.
If it is not used, then prompt if there are no other
vault ids provided and 'auto_prompt==True'.
Fixes vagrant bug https://github.com/hashicorp/vagrant/issues/9033Fixes#30993
* Update vmware.py
Incorrect chain of attributes to obtain snapshots from virtual machine. Module 'vmware_guest_facts' uses method 'gather_vm_facts' of vmware.py and always gets empty list of snapshots.
* Added test for module vmware_guest_facts. Checked VM snapshots.
* Fixed tests for vmware_guest_facts. Ignored certificate for vmware_guest_snapshot module.
* Integrated publickey import and removal in iosxr_user
* Fixed linting issues
* Added version added for publickeyfile option
* Added quotation marks to version, oops
* Added some integration tests, added some checks to prevent aggregate users with public keys.
* Added some integration test files
* Created mutually exclusive public_key and public_key_contents versions of config
* Modified tests to use both methods and test more logins
* Added supports for aggregates
* Incorporated provider auth
* Fixed some lint issues
* Fixed a YAML lint issue
* Implemented catches for unconfigured providers.
* Fixed catches, hopefully
* Another test
* Added groups support so you can add users to multiple groups
* Trailing whitespace
* Expand ansible-test --remote-terminate support:
- windows-integration
- network-integration
These commands previously accepted the option, but did not support it.
* Terminate windows and network instances when done.
Add new module vmware_host_facts ,it can get remote vmware host system info like setup module
* modify ansible version
* optimized output for human readable
* add serial number get_system_facts() add ansible_product_serial
* fix pep8 issue and ansible module required format
* Use find_obj method instead get_obj
* add ansible_hostname ansible_distribution_build
* add integration test
* vmware_host_facts integration test add verify
* fix yamllint issue
* fix boilerplate test
* Update vmware_host_facts.py
* fix RETURN key's name
* Adding git_command module and its UT file
* Changing Author Name and removing 2 blank lines
* Removing blank lines
* Adding enos_config and its UT files
* Removing config module as I am allowed to have only module per PR
* Work on Ganesh's Review comments
* John Review Comments on enos_command.py
* Review comments of John
* ios_vlan DI module
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Integration test
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* comment out testcases since the image is not available in dci
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* add aggregate test
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Do not run script in check mode
Fixes#30676
* Reformat script integration test
* Add integration tests for check mode of script module
* Fix name on test
* Cleanup temp file
* win_script integration test syntaxt changes
* Add check mode tests for win_script
* Use proper variable in test
* Fail if source file does not exist
* Verify script is accessible and don't copy in check mode
Use shlex to properly split shell arguments, though a path with spaces in it still needs to be quoted in the playbook.
Add note to docs describing such.
Improve error message if file is not found indicating there may be a space in the path.
* Properly encode path now that path is split using shlex
* Allow for spaces in both path and script name
* Add unicode character test to Linux script tests
* Add Linux test for space in path to script
* Remove uses of assert in production code
* Fix assertion
* Add code smell test for assertions, currently limited to lib/ansible
* Fix assertion
* Add docs for no-assert
* Remove new assert from enos
* Fix assert in module_utils.connection
* Clean up after two recent synchronize tests
- add clean up after the last two tests in synchronize to make them
match with the expectations in the previous tests
Signed-off-by: Robert Marshall <rmarshall@redhat.com>
* Add link-dest functionality to synchronize module
- add the link-dest option to the synchronize module code
- add tests for the link-dest option
- add documentation of the link_dest option to synchronize
- modify changed flag so it can properly work around rsync
upstream not flagging hardlinks as a change properly in
formatted output
Signed-off-by: Robert Marshall <rmarshall@redhat.com>
* Minor change to test
* Add mtu option nxos_interface feature idea
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Add unit test for mtu feature
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Better handling of malformed vault data envelope
If an embedded vaulted variable ('!vault' in yaml)
had an invalid format, it would eventually cause
an error for seemingly unrelated reasons.
"Invalid" meaning not valid hexlify (extra chars,
non-hex chars, etc).
For ex, if a host_vars file had invalid vault format
variables, on py2, it would cause an error like:
'ansible.vars.hostvars.HostVars object' has no
attribute u'broken.example.com'
Depending on where the invalid vault is, it could
also cause "VARIABLE IS NOT DEFINED!". The behavior
can also change if ansible-playbook is py2 or py3.
Root cause is errors from binascii.unhexlify() not
being handled consistently.
Fix is to add a AnsibleVaultFormatError exception and
raise it on any unhexlify() errors and to handle it
properly elsewhere.
Add a _unhexlify() that try/excepts around a binascii.unhexlify()
and raises an AnsibleVaultFormatError on invalid vault data.
This is so the same exception type is always raised for this
case. Previous it was different between py2 and py3.
binascii.unhexlify() raises a binascii.Error if the hexlified
blobs in a vault data blob are invalid.
On py2, binascii.Error is a subclass of Exception.
On py3, binascii.Error is a subclass of TypeError
When decrypting content of vault encrypted variables,
if a binascii.Error is raised it propagates up to
playbook.base.Base.post_validate(). post_validate()
handles exceptions for TypeErrors but not for
base Exception subclasses (like py2 binascii.Error).
* Add a display.warning on vault format errors
* Unit tests for _unhexlify, parse_vaulttext*
* Add intg test cases for invalid vault formats
Fixes#28038
* azure_rm_virtualmachine: added support for specifying custom image
* Use separate parameter for custom_image, add very basic test
* missed the version_added tag for doco
* removed whitespace I accidentally left in
* merged custom image into the image dict and added more tests
* added one more test
* implements jsonrpc message passing for ansible-connection
* implements more generic mechanism for persistent connections
* starts persistent connection in task_executor if enabled and supported
* supports using network_cli as top level connection plugin
* enhances logging for persistent connection to stdout
* Update action plugins
* Fix Python3 RPC
* Fix Junos bytes<-->str issues
* supports using netconf as top level connection plugin
* Error message when running netconf on an unsupported platform
* Update tests
* Fix `authorize: yes` for `connection: local`
* Handle potentially JSON data in terminal
* Add clarifying detail if possible on ConnectionError
* Protect AWS credentials from accidental commits
* Improve documentation for IAM policies
* Update ELB tests to be multi region
Allow AZs to reflect the region in which the tests are run.
This will not work for regions with fewer than three AZs,
but those are relatively rare
This fix adds details about snapshots in result of
vmware_guest_snapshot, when operation is successful.
Fixes: #32154
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Moving modules from lenovo to cnos
* Merge conflicts
* Update cnos_conditional_template.py
Removed
180:5: E265 block comment should start with '# '
188:34: E226 missing whitespace around arithmetic operator
* Update cnos_template.py
155:5: E265 block comment should start with '# '
162:34: E226 missing whitespace around arithmetic operator
* Update cnos_vlan.py
210:1: E302 expected 2 blank lines, found 1
* Update cnos_backup.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_bgp.py
Added
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_backup.py
Added a line extra
* Update cnos_command.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_conditional_command.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_conditional_template.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_factory.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_facts.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_image.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_interface.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_portchannel.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_reload.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_rollback.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_save.py
Add
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_showrun.py
Add
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_template.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_vlag.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_vlan.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_backup.py
Moving it to top of file
* Update cnos_backup.py
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Putting condition to bye pass paramiko
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Removing unused import and white spaces
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Update cnos_template.py
* Squashing all commits to one as suggested by John
* Adding Unit test method for the module enos_facts.py
* Pep8 and Ylint issues addressed
* Trying again to remove blank line. Some scripts are required for this.
* Bug Fixing for interfaces
* Editing for over indenting issue
* E203 whitespace before ','
* Update enos.py
Added warnings argument as to check_args method
* Update enos_facts.py
Added warnings to check_args method
* Move profile and region checking to module_utils.ec2
Remove ProfileNotFound checking from individual modules
There are plenty of `if not region:` checks that could be removed,
once more thorough testing of this change has occured
The ec2_asg, iam_managed_policy and ec2_vpc_subnet_facts modules
would also benefit from this change but as they do not have tests
and are marked stableinterface, they do not get this change.
* Ansible files module sanity pep8 fixes
* Ansible system module and playbook base.py
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Various changes
* Various changes
* Various changes
* Various changes
* Undo blank lines not required by sanity checks
* Various changes
* Various changes
* Various changes
* Various changes
* Various changes
* Undo blank line changes not required by sanity checks
* Various changes
* Various changes
* Various changes
* Various changes
* Various changes
* Missing piece after merge
* Blank lines
* Blank line
* Line too long
* Fix typo
* Unnecessary quotes
* Fix example error
* Add configuration of vlan trunk, security settings and port policies, and tests
This commit adds the following capabilities to the
vmware_dvs_portgroup module:
- Support for VLAN trunk portgroup
- Support for all security settings (promiscuous, forged transmits & mac
address changes)
- Support for all the port specific policies
- port specific policies match the vCenter UI behaviour (for instance:
block override is enabled by default)
- Cleanup and use of proper API entities not root entities
- Integration testing
* Cleanup of docs and adding more examples
* win_dsc: improved parameter handling
* removed uneeded try/catch leftover from testing
* removed undeed return values
* added custom DSC to fully test out casting
* fix up codestyle issues
* using new Requires ps version check
* fixed up error message check on earlier ps version
This fix allows user to specify alternative maintenance DB
required for initial connection in Postgresql_db module.
Also, adds pep8 related fixes.
Fixes: #30017
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
So we fixed everything that was not a module to be PEP8 compliant, and
in the meantime these 5 new files were additionally disabled from PEP8
testing.
This fixes it.
Also update Copyright/License statements.
* win_become: make it easier to become with an admin token
* Fixed up pep8 whitespace
* fix for Server 2008
* Added support for async and become on newer hosts and fix warnings
* show specific undefined var errors on -v in debug
allows users to get more specific information about undefined errors
as they might be looking at a complex data structure and need to find
the specific leaf that has the issue
* now tests works at all verbosity levels
* updated to unicode objects
* When getting the stack events we need to consider the case where we don't have ClientRequestToken fixes#32396
* Adding tests for the case when the ClientRequestToken is not present in the stack creation.
* Renaming the stack that the test for Client Request Token requires so it won't cause collisions with the basic test.
* Ensure include_role unit tests check something
This is not the case: get_tasks_vars doesn't yield
* Fix include_role unit tests
Since e609618274, include_role are not
static anymore.
* win_package: add support for arguments as list
* re-added failure tests as they were accidentally commented out
* changed exit_code in failure messages to rc
* [ec2_ami_facts] new boto3-based module as a replacement for ec2_ami_find
- new boto3-based module to gather facts about ec2 images
- intended to replace ec2_ami_find which uses boto
- an ami find task (using new module) added to the ec2_ami integration test
* [ec2_ami_facts] Use AnsibleAWSModule. Catch BotoCoreError.
* add ec2_ami_facts alias to tests
* [ec2_ami_facts] return ami launch permissions as well
This fix adds handling of error/exception message using
to_native API instead of decoding.
Also, fixes PEP8 errors.
Fixes: #31825
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Fix wrong prompt issue for network moodules
Fixes#31161Fixes#32416
* Store the device prompt in case of error
from remote device
* Check for prompt value in ios action plugin
* Add integration test
* Add some tests for iptables
* Fix remove bug (calls 2 times check to remove a chain)
* Add me as maintainer
* Fix PEP8
* Doc: Give more information on issue #18988
* Fix#18988 and test it
* Fix doc (thanks Pillou)
* enable PEP8 check for iptables
This patch addresses a number of issues, large and small, that were
identified by users in the downstream repo.
* formatting of some code
* specific option combinations leading to errors
* missing includes for unit tests
* add support to vmware_guest for template => vm conversion
While the vmware_guest currently supports conversion of VMs to templates
using the is_template argument, it does not support the inverse:
converting templates back into VMs. This change adds that
functionality.
When converting a template back into a VM, the extra config option
"uuid.action" is also set so that VMware will automatically create a new
UUID for the converted VM. If the "uuid.action" setting is already
configured, it will not be modified. Setting this prevents an
interactive question from being raised when attempting to boot the VM.
* Add integration tests for vmware_guest is_template
* Add additional idempotency test for vmware_guest is_template
* ios_logging: Fix typo in documentation
* ios_logging: Fix traceback when setting buffered destination without size
When the size parameter is not configured while configuring the buffered
destination, a traceback occurs due to the fact that validate_size expects the
parameter to be an int. Explicitely converting value to int makes the
check work for every case.
* ios_logging: Update size parameter documentation
Update the documentation of the size paramter to reflect the current behaviour
of setting a default of 4096 for the buffered dest.
* ios_logging: Add unit test
Add unit test for ios_logging testing the behaviour clarified in the previous
commits.
* ios_logging: Fix python 2.6 compliance
Also add tests for vmware_guest_snapshot, but disable them due to
vcsim not fully supporting such operations yet.
Implement changes suggested in review. Also fix same in remove_or_revert_snapshot() for consistency
This module's purpose is to specifically manage the ssl keys. It
is essentially the key component of the bigip_ssl_certificate module.
The modules were separated and the key portion deprecated from
bigip_ssl_certificate in favor of this module.
These tests are doing string matches on the error condition. Update
them to match the new strings. This is probably okay to push out to old
releases even though it's technically backwards incompatible because
production playbooks won't be checking that a parameter was missing.
Param missing is something detected and fixed while writing the playbook.
* Allow cloudformation_facts to exit gracefully if stack does not exist
make cloudformation_facts pep8
remove from legacy files
remove unnecessary if statement
Allow cloudformation_facts to exit gracefully if stack does not exist version 2
fix documentation errors
add an example for a hard-fail if a stack doesn't exist
* Remove extra whitespace
* Use the .response attribute since .message isn't present with Python 3
* Don't fail if no stack name is provided and no stacks exist.
* add static route and hsrp it cases
* add snmp_user and snapshot it
* password strength correction
* fix typo
* add compare snapshot as it is fixed in the code now
* skip snapshot tests for titanium
* titanium and nxapi conditions added
Turns out on devices where only Gigabit is available (like our
csr nodes in CI), duplex is not configurable, thus the test fail.
Removing, since we are testing modification of other properties like
description and mtu and have good coverage.
* Use correct pip version in ansible-test.
* Add git fallback for validate-modules.
* Run sanity tests in a docker container.
* Use correct python version for sanity tests.
* Pin docker completion images and add default.
* Split pylint execution into multiple contexts.
* Only test .py files in use-argspec-type-path test.
* Accept identical python interpeter name or binary.
* Switch cloud tests to default container.
* Remove unused extras from pip install.
* Filter out empty pip commands.
* Don't force running of pip list.
* Support delegation for windows and network tests.
* Fix ansible-test python version usage.
* Fix ansible-test python version skipping.
* Use absolute path for log in ansible-test.
* Run vyos_command test on python 3.
* Fix windows/network instance persistence.
* Add `test/cache` dir to classification.
* Enable more python versions for network tests.
* Fix cs_router test.
* update ec2_vpc_net_facts module to boto3
updated with RETURN values and other requested changes
removed errant extra blank line
another errant extra line removed...auto-linter not working apparently
updates per review
fix typo in RETURN docs
* fix trailing whitespace issue
* Add nxos_file_copy IT
* Restructure nxos_igmp tests
* add nxos_igmp_interface IT
* add nxos_igmp_snooping IT
* add nxos_ntp_auth IT
* Add nxos_ntp_options IT
* update nxos.yaml with new tests
* update nxos_ntp_options test
* update nxos_ntp_auth IT
In some IOS tests, we can't just assume a certain interface, as
we test on IOS and IOS-XE and in our CI they scheme numbering is
different.
Introspect version on the tests where needed.
* ec2_group: add support for rule descriptions.
* Document rule description feature and add an example using it.
* Fix removing rule descriptions.
* Add integration tests to verify adding/modifying/removing rule descriptions works as expected.
* Add permissions to hacking/aws_config/testing_policies/ec2-policy.json for updating ingress and egress rule descriptions.
* ec2_group: add backwards compatibility with older versions of botocore for rule descriptions.
* Add compatibility with older version of botocore for ec2_group integration tests.
* ec2_group: move HAS_RULE_DESCRIPTION to be checked first.
* Make requested change
* Pass around a variable instead of client
* Make sure has_rule_description defaults to None
* Fail if rule_desc is in any ingress/egress rules and the the botocore version < 1.7.2
* Remove unnecessary variable
* Fix indentation for changed=True when updating rule descriptions.
* minor refactor to remove duplicate code
* add missing parameter
* Fix pep8
* Update test policy.
* - Adds iosxr_netconf module to configure netcong service on Cisco
IOS-XR devices
* - Adds Integration test for module
- Handles diff return from load_config
* - Adds unit test for iosxr_netconf module
* windows: add #AnsibleRequires to set whether a module requires module or a specific version
* fix up pep8 issues
* changed psversion to use the actual ps Requires -Version syntax
* missed the check on #Requires -Version
* fix #Requires module extensions
* module_utils #Requires should not have .psm1 extension if "real" Powershell will ever execute them
* updated validate-modules to enforce this
* added check to disallow multi-module syntax on Ansible.ModuleUtils #Requires
* Start using ClientRequestTokens in event lists
* Include request token in all reqs that support it (basically all but check mode/changeset)
* Update placebo recordings
* Add comments for CRQ popping
* Add openssh-client to default docker container.
* Include Azure requirements in default container.
To do so, handling of pip requirements was updated to install each
set of requirements separately and then run a verification pass to
make sure there are no conflicts between requirements.
* Add missing --docker-no-pull option.
* Add documentation for the azure-requirements test.
* Handle timezone updates on Ubuntu 16.04+ on containers
Although Ubuntu 16.04 will use timedatectl by default,
containers without a working timedatectl need to use the
old method.
A bug in Ubuntu for the old method means having to write
a nasty hack
https://bugs.launchpad.net/ubuntu/+source/tzdata/+bug/1554806
* Add tests for timezones
Ensure timezone changes work across various OSs
* added win_audit_rule with integration test
* Updated integration testing to target files as well as directories
and registry keys. Split testing files apart to be more organized.
Updated powershell for better handling when targetting file objects
and optimized a bit. Removed duplicated sections that got there from a
previous merge I think.
* Decided to make all the fact names the same in integration testing.
Seemed like there would be less change of accidentally using the wrong
variable when copy/pasting that way, and not much upside to having
unique names.
Did final cleanup and fixed a few errors in the integration testing.
* Fixed a bug where results was displaying a wrong value
Fixed a bug where removal was failing if multiple rules existed due to
inheritance from higher level objects.
* Resolved issue with unhandled error when used didn't have permissions
for get-acl.
Changed from setauditrule to addauditrule, see comment in script for reasoning.
Fixed state absent to be able to remove multiple entries if they exist.
* fixed docs issue
* updated to fail if invalid inheritance_rule when defining a file rather than warn
Module allows you to wait for a bigip device to be
"ready" for configuration. This module will wait for things like
the device coming online as well as the REST API and MCPD being
ready.
If all of the above is not online and ready, then no configuration
will be able to be made.
* better cleanup on task results display
callbacks get 'clean' copy of result objects
moved cleanup into result object itself
removed now redundant callback cleanup
moved no_log tests
* moved import as per feedback
In this refactor we moved to the most recent coding standards for
both F5 and Ansible. Many bugs were fixed and some features were
also added (such as ipv6 support).
New conventions for ansible warrant fixes to accomodate those
in bigip_partition.
This patch also includes an import fix that can raise an error when
Ansible unit tests run
This adds a new type of vault-password script (a 'client') that takes advantage of and enhances the
multiple vault password support.
If a vault password script basename ends with the name '-client', consider it a vault password script client.
A vault password script 'client' just means that the script will take a '--vault-id' command line arg.
The previous vault password script (as invoked by --vault-password-file pointing to an executable) takes
no args and returns the password on stdout. But it doesnt know anything about --vault-id or multiple vault
passwords.
The new 'protocol' of the vault password script takes a cli arg ('--vault-id') so that it can lookup that specific
vault-id and return it's password.
Since existing vault password scripts don't know the new 'protocol', a way to distinguish password scripts
that do understand the protocol was needed. The convention now is to consider password scripts that are
named like 'something-client.py' (and executable) to be vault password client scripts.
The new client scripts get invoked with the '--vault-id' they were requested for. An example:
ansible-playbook --vault-id my_vault_id@contrib/vault/vault-keyring-client.py some_playbook.yml
That will cause the 'contrib/vault/vault-keyring-client.py' script to be invoked as:
contrib/vault/vault-keyring-client.py --vault-id my_vault_id
The previous vault-keyring.py password script was extended to become vault-keyring-client.py. It uses
the python 'keyring' module to request secrets from various backends. The plain 'vault-keyring.py' script
would determine which key id and keyring name to use based on values that had to be set in ansible.cfg.
So it was also limited to one keyring name.
The new vault-keyring-client.py will request the secret for the vault id provided via the '--vault-id' option.
The script can be used without config and can be used for multiple keyring ids (and keyrings).
On success, a vault password client script will print the password to stdout and exit with a return code of 0.
If the 'client' script can't find a secret for the --vault-id, the script will exit with return code of 2 and print an error to stderr.
* documentation was not inline with other Ansible modules
* Python 3 specific imports were missing
* monitor_type is no longer required when creating a new pool; it is now the default.
* A new monitor_type choice of "single" was added for a more intuitive way to specify "a single monitor". It uses "and_list" underneath, but provides additional checks to ensure that you are specifying only a single monitor.
* host and port arguments have been deprecated for now. Please use bigip_pool_member instead.
* 'partition' field was missing from documentation.
* A note that "python 2.7 or greater is required" has been added for those who were not aware that this applies for ALL F5 modules.
* Unit tests were fixed to support the above module
* Correct usage for shutil.rmtree
Fix adds correct usage of shutil.rmtree in git module
Fixes: #31225
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Include archive tests so they get run
* Use new include syntax
* Cleanup syntax on git tests
- use multi-line YAML
- remove unneeded {{ }} around vars in conditionals
- remove unneeded quotes
- add task file name to task names for easier troubleshooting when things fail
* Make archive tests work for RHEL/CentOS 6
The older versions of Jinja2 in RHEL/CentOS 6 required assertion tasks using the map filter to be skipped.
The older version of git required gzip compression to be skipped on RHEL/CentOS 6.
* Account for ansible_distribution_major_version missing
* Adding a cli transport option for the bigip_command module.
* Fixing keyerror when using other f5 modules. Adding version_added for new option in bigip_command.
* Removing local connection check because the F5 tasks can be delegated to any host that has the libraries for REST.
* Using the network_common load_provider.
* Adding unit test to cover cli transport and updating previous unit test to ensure cli was not called.
* Initial CD-ROM support
* create cdrom bugfix
* Improving CDROM change detection and fixing template creation bug
Running MarkAsTemplate on an existing template will fail with an error
* Better change detection for guest ID
Should only mark a change in case it actually changes
* Adding integration tests
* Pep8 compliance fixes
* Adding CDROM support, including iso, client and none types
* Updating added release version for CDROM option
* Fix rollback in junos_config
Fixes#30778
* Call `load_configuration` with rollback id in case
the id is given as input
* Pass rollback id to `get_diff()` to fetch diff from device
* Fix unit test
- old functionality is still available direct lookup use, the following are equivalent
with_nested: [[1,2,3], ['a','b','c']]
loop: "{{lookup('nested', [1,2,3], ['a','b','c'])}}"
- avoid squashing with 'loop:'
- fixed test to use new intenal attributes
- removed most of 'lookup docs' as these now reside in the plugins
* Remove sysctl entry when state=absent
* Cleanup sysctl integration test syntax
* Correct grammar on error message
* Add sysctl integration test for state=absent
* [rpm_key] Fix to import first key on the system
Fixes: #31483
* [rpm_key] removed unsafe_shell and "throwaway" underscore
* [rpm_key] adding test to add the first key on system
* Added warning for 'force' option
* Changed 'profiles' type to list
* Changed 'interfacetypes' type to list
* Added deprecation warning and fixed doc
* updated force parameter
* Remove cloudstack, f5, and nxos from the wildcard import whitelist
* Remove nxos and f5 from the get_exception whitelist
* Remove some files from the pep8 legacy whitelist
* win_become: Added support to become a service user
* fixes for linting
* changes to get local and network service working
* fixed linting issues again
* pleasing pepe
* Make ansible_selinux facts a consistent type
Rather than returning a bool if the Python library is missing, return a dict with one key containing a message explaining there is no way to tell the status of SELinux on the system becasue the Python library is not present.
* Fix unit test
* Add update_only parameter for yum module
When using latest, `update_only: yes` will ensure that only existing
packages are updated and no additional packages are installed.
* Update yum.py
Update version added for `update_only` parameter to 2.5
* add unit tests for update_only flag in yum module
* Add new lines to end of config file lines
* Properly write out selinux config file
Change module behavior to not always report a change but warn if a reboot is needed and return reboot_required.
Improve the output messages.
Add strip parameter to get_file_lines utility to help with parsing the selinux config file.
* Add return documentation
* Add integration tests for selinux module
* Use consistent capitalization for SELinux
* Use atomic_move in selinux module
* Don't copy the config file initially
There's no need to make a copy just for reading.
* Put message after set_config_policy in case the change fails
* Add aliases to selinux tests
* win_become: move error handling to Ansible outside of shell
* trimmed the output so double newlines don't get set
* added test for non-zero exit code
* missed issue URL on test
* changed exit to SetShouldExit
The /etc/os-release based distro detection doesn't
seem to work for Ubuntu 10.04 (no /etc/os-release?).
So it was testing the next case which was /etc/lsb-release to
see if it is 'Mandriva'. Since the check for existence of
(/etc/lsb-release, Mandrive) was the first non-empty dist
file match, 'ansible_distribution' was being set to 'Mandriva'
expecting to be corrected by the data from the dist file content.
But since the dist file parsing for Mandriva didn't match for
Ubuntu 10.04 /etc/lsb-release _and_ there is no Debian specific
lsb-release check, 'ansible_distribution' stayed at 'Mandriva'
and the dist file checking loop keeps going and eventually off
the end of the list before finding a better match.
Adding a debian/ubuntu specific check for /etc/lsb-release after
the debian os-release sets the info correctly and stops further
checking of dist files.
Fixes#30693
In cli.CLI.unfrack_path callback, special case if the
value of '--output' is '-', and avoid expanding
it to a full path.
vault cli already has special cases for '-', so it
just needs to get the original value to work.
Fixes#30550
* Added support to retrieving LIG resources in HPE OneView
* Fixing copyright header according to review
* Swapping out config for full credentials in parameter for documentation
* Added support to retrieving Enclosures in HPE OneView
- Added unit tests
* Updated version_added to 2.5
* Changing return type of enclosure_script to string
* Fixing copyright header according to review
* Replaced config for credentials in parameters for documentation
Fix adds a new module 'vmware_guest_powerstate' to manage
power states of virtual machine.
Fixes: #30371
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Fix fact failures cause by ordering of collectors
Some fact collectors need info collected by other facts.
(for ex, service_mgr needs to know 'ansible_system').
This info is passed to the Collector.collect method via
the 'collected_facts' info.
But, the order the fact collectors were running in is
not a set order, so collectors like service_mgr could
run before the PlatformFactCollect ('ansible_system', etc),
so the 'ansible_system' fact would not exist yet.
Depending on the collector and the deps, this can result
in incorrect behavior and wrong or missing facts.
To make the ordering of the collectors more consistent
and predictable, the code that builds that list is now
driven by the order of collectors in default_collectors.py,
and the rest of the code tries to preserve it.
* Flip the loops when building collector names
iterate over the ordered default_collectors list
selecting them for the final list in order instead
of driving it from the unordered collector_names set.
This lets the list returned by select_collector_classes
to stay in the same order as default_collectors.collectors
For collectors that have implicit deps on other fact collectors,
the default collectors can be ordered to include those early.
* default_collectors.py now uses a handful of sub lists of
collectors that can be ordered in default_collectors.collectors.
fixes#30753fixes#30623
Avoid the following seen when running ec2_ami tests on python3,
presumably because the return type of `map` is different between
python2 and python3.
```
Traceback (most recent call last):
File "/tmp/ansible_e44v27uj/ansible_module_ec2_snapshot_facts.py", line 242, in <module>
main()
File "/tmp/ansible_e44v27uj/ansible_module_ec2_snapshot_facts.py", line 238, in main
list_ec2_snapshots(connection, module)
File "/tmp/ansible_e44v27uj/ansible_module_ec2_snapshot_facts.py", line 193, in list_ec2_snapshots
snapshots = connection.describe_snapshots(SnapshotIds=snapshot_ids, OwnerIds=owner_ids, RestorableByUserIds=restorable_by_user_ids, Filters=filters)
File "/usr/local/lib/python3.5/dist-packages/botocore/client.py", line 312, in _api_call
return self._make_api_call(operation_name, kwargs)
File "/usr/local/lib/python3.5/dist-packages/botocore/client.py", line 575, in _make_api_call
api_params, operation_model, context=request_context)
File "/usr/local/lib/python3.5/dist-packages/botocore/client.py", line 630, in _convert_to_request_dict
api_params, operation_model)
File "/usr/local/lib/python3.5/dist-packages/botocore/validate.py", line 291, in serialize_to_request
raise ParamValidationError(report=report.generate_report())
botocore.exceptions.ParamValidationError: Parameter validation failed:
Invalid type for parameter OwnerIds, value: <map object at 0x7ff577511048>, type: <class 'map'>, valid types: <class 'list'>, <class 'tuple'>
```
https://github.com/ansible/ansible/pull/30435#issuecomment-330750498
* Save the serialized values instead of their types
* Add tests for creating and modifying VMs without using a template
* Remove blank line
* Add tests for vm deletion
* Fix cloudwatchevent_rule exception handling
Where it is currently present, this change fixes the exception handling.
However, there are many places that it is lacking.
Fixes#30806
* Add new exception handling for cloudwatchevent_rule
Ensure all API calls are wrapped with exception handling
* PEP8 tidy up
* Remove unnecessary HAS_BOTO3 import and checks
Tidy up documentation so that NO_QA can be removed
* Use vault_id when encrypted via vault-edit
On the encryption stage of
'ansible-vault edit --vault-id=someid@passfile somefile',
the vault id was not being passed to encrypt() so the files were
always saved with the default vault id in the 1.1 version format.
When trying to edit that file a second time, also with a --vault-id,
the file would be decrypted with the secret associated with the
provided vault-id, but since the encrypted file had no vault id
in the envelope there would be no match for 'default' secrets.
(Only the --vault-id was included in the potential matches, so
the vault id actually used to decrypt was not).
If that list was empty, there would be an IndexError when trying
to encrypted the changed file. This would result in the displayed
error:
ERROR! Unexpected Exception, this is probably a bug: list index out of range
Fix is two parts:
1) use the vault id when encrypting from edit
2) when matching the secret to use for encrypting after edit,
include the vault id that was used for decryption and not just
the vault id (or lack of vault id) from the envelope.
add unit tests for #30575 and intg tests for 'ansible-vault edit'
Fixes#30575
Matt Clay