* Move var_blending test inventory into test.
* Remove Amazon specific inventory entry for tests.
* Remove Azure specific inventory entry for tests.
* Move var_precedence test inventory into test.
* Move unicode test inventory into test.
* Remove unused inventory entry.
* Move gathering_facts test inventory into test.
* Move delegate_to test inventory into test.
* Clean up inventory for binary_modules test.
* Clean up integration test inventory.
* Add tests for WANT_JSON and old style modules
* quote source path
* Attempt to further appease tests
* Check for file and not just exists
* omg don't be dumb
* moar fixes
* shellcheck is the worst :)
* Test the custom modules for failure without arg files
Provide toggle flag to allow display of unreachable task to stderr
using default callback plugin.
Fixes: #48069
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* fixing the exception import from tower modules
* Adding tests for checking tower modules are failing with correct msg
* fixed failing tests
* fixed failing test in tower_team
* Included support to AIX group subsystems
AIX systems has subsystems as services but also uses group
subsystems.
For example, spooler is a group subsystem to services
qdaemon, writesrv, and lpd.
This change enables the possibility to use also the group
susbsystmes such as spooler, nfs, etc.
When the service name is informed, first the module will
check if the name is a subsystem, if not it will check if
the name is a group subsystem and also it subsystems states.
This change makes services more flexible with AIX systems.
* Included test/legacy/aix_services.yml for tests
As discussed on IRC ansible-devel channes, was include the
legacy tests for further manual tests.
* Introduce 'insertbefore' and 'insertafter' to specify the position children have to be inserted.
* Added version_added to new options
* Xpath in example needs single quotes
* Added integration tests for insertafter and insertbefore
* Changed version_added to 2.8
* Improve cleanup.
* Add check mode tests.
Failing tests commented out; will be fixed in #49948.
* Add reload and reset tests.
* Add tests for other global state.
* Work around ufw bugs.
* Cloudscale integration test setup
CloudProvider and CloudEnvironment classes for Cloudscale integration
tests. This also contains a cloudscale_common role with common
variables for all tests.
* cloudscale_volume module
New cloud module to manage volumes on the cloudscale.ch IaaS service.
* Add checkpoint httpapi plugin and access rule facts module
* WIP checkpoint_access_rule module
* Add publish and install policy, plus fix empty json object request for publish
* Refactor publish and install_policy onto module_utils
* Add update resource logic
* Add checkpoint_host_facts module
* Return code and response on get_acess_rule function
* Add checkpoint_host module
* Add checkpoint_run_script module
* Add checkpoint_task_facts module
* Show all tasks if no task id is passed
Note, this is only available on v1.3 of Checkpoint WS API
* Add update logic to checkpoint host
* Add full details on get task call
* Add checkpoint httpapi plugin
* Fix pep8
* Use auth instead of sid property and return False on handle_httperror method
* Fix version in docstring
* Remove constructor
* Remove Accept from base headers
* Do not override http error handler and assign Checkpoint sid to connection _auth
There is scaffolding in the base class to autoappend the token, given
it is assigned to connection _send
* Use new connection queue message method instead of display
* Remove unused display
* Catch ValueError, since it's a parent of JSONDecodeError
* Make static methods that are not used outside the class regular methods
* Add missing self to previously static methods
* Fix logout
Was carrying copy pasta from ftd plugin
* Remove send_auth_request
* Use BASE_HEADERS constant
* Simplify copyright header on httpapi plugin
* Remove access rule module
* Remove unused imports
* Add unit test
* Fix pep8
* Add test
* Add test
* Fix pep8
* new module: AIX LVM file system and NFS
This module creates, removes, mount and unmount LVM and NFS file system
for AIX using /etc/filesystems. For LVM file systems is also possible
to resize the file system.
* better parameters options structure
better parameters options structure
* Improved file system resize returns
Added better tratment for return codes for file system resize.
When a resize is not possible because no enough space on lv or
shrink is not allowed.
* improved doc and creation file system return code
- improved doc
- creation file system return code 10 was treated.
* Doc recomendations, dict result, line limit
- Added doc recomendations
- Changed return to dict results on main()
- Using 159 columns for code limit
* wrong changed return when file system is already
Fixed wrong changed return when file system is already mounted.
When the file system is already mounted the return for changed
is False.
* Fixed description and included playbook for tests
- Fixed description
- Included playbook for manual tests
* Various small bits to get this merged ASAP
* Rename test/legacy/aix_filesystem.yml to test/integration/targets/aix_filesystem/tasks/main.yml
Move integration test to its proper location
* Create aliases
* Fix CI issues
* Fix backup issue in network config modules
* Fix `get_working_path` not found issue introduced due to
backup config code refactor (PR #50208)
* Further refactor config related action plugins to minimize
duplicate code
* Remove unwated imports in config action plugins
* Add common network class for action plugin and related code refactor
* Fix review comment
User module can contain Indentation errors or syntax errors.
Handle AST exceptions rather than showing traceback while importing such module.
Fixes: #21707
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Note: Python2 is not as intelligent at detecting false import loops as
Python3. context_objects.py cannot be added to cli/arguments because it
would set up an import loop between cli/__init__.py,
cli/arguments/context_objects.py, and context.py on Python2.
ci_complete
The goal of breaking apart the base_parser() function is to get rid of
a bunch of conditionals and parameters in the code and, instead, make
code look like simple composition.
When splitting, a choice had to be made as to whether this would operate
by side effect (modifying a passed in parser) or side effect-free
(returning a new parser everytime).
Making a version that's side-effect-free appears to be fighting with the
optparse API (it wants to work by creating a parser object, configuring
the object, and then parsing the arguments with it) so instead, make it
clear that our helper functions are modifying the passed in parser by
(1) not returning the parser and (2) changing the function names to be
more clear that it is operating by side-effect.
Also move all of the generic optparse code, along with the argument
context classes, into a new subdirectory.
* Once cli args are parsed, they're constant. So, save the parsed args
into the global context for everyone else to use them from now on.
* Port cli scripts to use the CLIARGS in the context
* Refactor call to parse cli args into the run() method
* Fix unittests for changes to the internals of CLI arg parsing
* Port callback plugins to use context.CLIARGS
* Got rid of the private self._options attribute
* Use context.CLIARGS in the individual callback plugins instead.
* Also output positional arguments in default and unixy plugins
* Code has been simplified since we're now dealing with a dict rather
than Optparse.Value
* Move get_all_subclasses out of sys_info as it is unrelated to system
information.
* get_all_subclasses now returns a set() instead of a list.
* Don't port get_platform to sys_info as it is deprecated. Code using
the common API should just use platform.system() directly.
* Rename load_platform_subclass() to get_platform_subclass and do not
instantiate the rturned class.
* Test the compat shims in module_utils/basic.py separately from the new
API in module_utils/common/sys_info.py and module_utils/common/_utils.py
* urldecode filter for Jinja2
We needed this in order to deconstruct correct URLs using Jinja2.
And we might as well upstream this.
* Add integration tests
* Fixes for Python 3
* Add urlencode for older Jinja2
* add openssh_cert module
* fix some linter issues
* address review feedback
* add basis for integration tests
* change valid datetime formats
* handle principals as set not as list
* handle principals as set not as list
* handle principals as set not as list
* fix order of dnf api operations so transactions don't fail
Previously dnf.base.fill_sack() was called before
dnf.base.update_cache() which apparently breaks dnf transaction
logic as per https://bugzilla.redhat.com/show_bug.cgi?id=1658694Fixes#49060
Signed-off-by: Adam Miller <admiller@redhat.com>
* add changelog and test case
Signed-off-by: Adam Miller <admiller@redhat.com>
Codecov.io have made some improvements to results processing.
Upload all the coverage data to see is codecov can process this.
Reverts https://github.com/ansible/ansible/pull/47515
* Fix Issue #39598
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix unit test for onyx_config
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Add comments for save running config
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Enhance onyx_config bug fix
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix result['changed'] = True comment
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* MSC: Various bugfixes and features enhancements
This PR includes:
- Lookups of roles, labels and domains
- Auto-create new labels
- Improvements to comparing complex datastructures
- Force removal of sites
- Support non top-level queries
- Document internal functions
- Add parameter types to modules
- Fix documentation examples
- Improvements to idempotency wrt. returning changed
- Support site locations
- Update permission list
- Various improvements to integration tests
* Fix Ci issues
* Refactor integration test for lvg module to introduce grow/reduce test
* List correctly current PV in lvg module: fix lvg reduce
Previous behaviour was to only take into account PV passed in 'pvs'
argument. This lead to reduce not working as expecting:
* with state=present and list of wanted pvs, lvg found only the pvs to
add or already present and ignored the pv to remove (obviously absent
from the list of given PV)
* with state=absent and a pv to remove, lvg found that the remaining pvs
list is empty (ignoring possible other PV in the vg) and decides to
remove the vg entirely (as supposely no PV are left anymore to store
lvm metadata)
* Add changelog fragment
* Refactoring of cnos_interface module like what followed by other vendors
* To remove cnos-interface from E326 validation ignore list
* Effect of default parameters impacted UT
* Added organization in the scm_credential get
* Fallback looking for cred in project org
* Tests project with multi org credential
* Fixed CI issue
* Added changelog fragment
* Fix mandatory statement error for junos modules
Fixes#40267
* Add error regex in junos terminal plugin to error out
in case of commit fails
* If commit fails add logic to discard changes before existing
else next task will result in error
* Add integration test
* Minor update
* Revert "allow caller to deal with timeout (#49449)"
This reverts commit 63279823a7.
Flawed on many levels
* Adds poor API to a public function
* Papers over the fact that the public function is doing something bad
by catching exceptions it cannot handle in the first place
* Papers over the real cause of the issue which is a bug in the timeout
decorator
* Doesn't reraise properly
* Catches the wrong exception
Fixes#49824Fixes#49817
* Make the timeout decorator properly raise an exception outside of the function's scope
signal handlers which raise exceptions will never work well because the
exception can be raised anywhere in the called code. This leads to
exception race conditions where the exceptions could end up being
hanlded by unintended pieces of the called code.
The timeout decorator was using just that idiom. It was especially bad
because the decorator syntactically occurs outside of the called code
but because of the signal handler, the exception was being raised inside
of the called code.
This change uses a thread instead of a signal to manage the timeout in
parallel to the execution of the decorated function. Since raising of
the exception happens inside of the decorator, now, instead of inside of
a signal handler, the timeout exception is raised from outside of the
called code as expected which makes reasoning about where exceptions are
to be expected intuitive again.
Fixes#43884
* Add a common case test.
Adding an integration test driven from our unittests. Most of the time
we'll timeout in run_command which is running things in a subprocess.
Create a test for that specific case in case anything funky comes up
between threading and execve.
* Don't use OSError-based TimeoutError as a base class
Unlike most standard exceptions, OSError has a specific parameter list
with specific meanings. Instead follow the example of other stdlib
functions, concurrent.futures and multiprocessing and define a separate
TimeoutException.
* Add comment and docstring to point out that this is not hte Python3 TimeoutError
* Fix example in ini.py
* Fix unittest in test_ini.py to pass CI as latest ansible returns list in
different order. To prevent such issues in future results are sorted
* PEP8 E501 styling improvements
Co-Authored-By: Sergii Golovatiuk <sgolovat@redhat.com>
* no-smart-quotes: Skip files by path in code-smell
This is to ensure the generated docs do not trigger code-smell issues on
contributor systems.
* Implement feedback from review
* Add cryptography backend for openssl_privatekey.
* Adding ECC support.
No support for X25519 and X449, since they don't support serialization.
* Improve finterprint calculation to work with Python 3.
* Add fingerprint check.
* Fix typo.
* Use separate curve option for elliptic curves, and use type 'ECC'.
* Using curve names as defined in IANA registry.
* Bump minimal supported cryptography version. Older versions might work as well, but I couldn't test them.
* Improve documentation.
* Change test suite to fit expected behaviour
This reverts some changes from ansible/ansible@723daf3
If a line is found in the file, exactly or via regexp matching, it must
not be added again.
insertafter/insertbefore options are used only when a line is to be
inserted, to specify where it must be added.
* Implement the change in behaviour mentioned in the previous commit
* Fix comment to reflect what the code does
* Set the correct return message.
In these cases, the lines are added, not replaced.
* Add a changelog
* Allow tags to be templated from a variable. Fixes#49825
* Restore _load_tags to ensure we do csv tag splitting
* Add tests for csv tags and templated tags
* evaluate_tags doesn't need to accept strings, because _load_tags handles this
Since the 'platform.dist()' and 'platform.linux_distribution()'
methods will be removed from future versions of python, this
provides an alternative to replace ansibles use of those
methods.
lib/ansible/module_utils/distro.py is a copy of
https://github.com/nir0s/distro/blob/master/distro.py
This module is originally from https://github.com/nir0s/distro
and is license under the Apache License, Version 2.0.
* In some cases, it appears that Exception should have been used instead
as there's no need to catch sys.exit KeyboardInterrupt and similar.
* In a few cases, it appears that BaseException is used because
a library we depend on calls sys.exit() contrary to good coding
design. Comment those so that we know that those have been audited
and found to be correct and change to use (Exception, SystemExit)
instead.
* Windows Privileges - moved util code to it's own C# util
* Rename Enabler class to PrivilegeEnabler to remove ambiguity
* rename Utils to PrivilegeUtil
* fix missing util name changes
This work enables to add sit tunnel via nmcli module
Signed-off-by: Susant Sahani susant@redhat.com
SUMMARY
ISSUE TYPE
Feature Pull Request
COMPONENT NAME
nmcli
ANSIBLE VERSION
2.8
ADDITIONAL INFORMATION
- nmcli:
state: present
type: sit
conn_name: sit_test1
autoconnect: yes
ip_tunnel_dev: enp0s8
ip_tunnel_local: 192.168.1.2
ip_tunnel_remote: 192.168.1.5
* win become: refactor and add support for passwordless become
* make tests more stable
* fix up dep message for Load-CommandUtils
* Add further check for System impersonation token
* re-add support for become with accounts that have no password
* doc fixes and slight code improvements
* fix doc sanity issue
* Docs: Add a separate "seealso" section to the module docs
to list related modules and/or related references. This clears up the notes
section for things that are actual notes.
So you can add a section in your module documentation and four types of
references are possible.
seealso:
# Reference by module name
- module: aci_tenant
# Reference by module name, including description
- module: aci_tenant
description: ACI module to create tenants on a Cisco ACI fabric.
# Reference by rST documentation anchor
- ref: aci_guide
description: Detailed information on how to manage your ACI infrastructure using Ansible.
# Reference by Internet resource
- name: APIC Management Information Model reference
description: Complete reference of the APIC object model.
link: https://developer.cisco.com/docs/apic-mim-ref/
This PR also includes:
- Implements ansible-doc support
- Implements schema support for the seealso options
- Updates to the development documentation
- Rename filter convert_symbols_to_format to rst_ify, cfr the existing html_ify and tty_ify filters
- This makes the existing template a lot easier to read and fixes the confusion I had myself rereading the template (again).
- We fixed the possible suboption types (which was limited to 'bool' only)
* Use latest stable instead of devel docs
- Require username and password for unregistering and avoid "cannot marshal None unless allow_none is enabled" error when using an activation key and no channels specified.
- Update test fixtures and add changelog
Co-authored-by: WhyIsThisOpen <WhyIsThisOpen@users.noreply.github.com>
* Pluribus Networks pn access list ip module with unit test cases
* Changes according to ansibot standards in unit test modules
* Remove unwanted variables
* Removed unwanted super call
* set ansible_os_family from name variable in os-release for clearlinux system
Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com>
* Add os_family for clear linux and clear linux mixes
Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com>
* Fix various bugs related in reboot
- Use format strings for consistency and improve debug log messages
- Use local variables instead of class attributes in order to be thread safe
- Run setup module to get distribution and version
- Run find module to get full path of shutdown command
- Use ansible_os_family and ansible_distribution to find commands and args
- Use same command for all Solaris/SunOS distributions
- Move delay calculations to properties
- Reliably check for module run failure
- Fix bug in run_test_command() that accidentally made the method work properly
- Use better exceptions rather than Exception
- Use dict literals rather than constructors
- Correct _check_delay() so it always returns a value, not None
- Don't store and return result in run_test_command() because it's not used anywhere
- add test for post reboot command that fails
- test negative values for delay parameters
* Consolidate handler tracking
- Remove unused code. ci_complete
- unit test fixes. ci_complete
- Restore previous behavior of matching a single handler
- when notifying a host for a handler, return True if it was added, False otherwise, to reduce copied logic
- rename funcitons for clarity. ci_complete
- Remove handler logic for static includes which was disabled previously
Template lookup plugin now support variable_start_string and
variable_end_string, just like template module.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* read_csv: new module to read CSV files
* Add a doc reference to the csvfile lookup plugin
* Enable the use of custom dialect options
* Improve error handling
* Fix PEP8
* Fix more PEP8
* Simplify custom dialect code
* Add integration tests
* Fixes for CI
* Fix for python 2.6
* Add info about loop based on jinja2 loop var
* ansible_loop
* Update test count
* Add extended loop_control that defines whether ansible_loop should be added
* Extended needs to be defaulted
* Revert "Update test count"
This reverts commit f1e93ee469825f4cdcd90fb28667d29aa088275c.
* Add docs about loop_control.extended
* Add revindex and revindex0
* Document ansible_loop in special vars
* Add changelog fragment
* Add tests, change items to allitems so that dot notation works, fix logic error with previtem
* Simplify permission changing code for rabbitmq_user module
* Add check for multiple permission dicts for same host to rabbitmq_user module
* Add docstring for _get_permission method of rabbitmq_user
* Fix method that compares vhost permissions in rabbitmq_user
* Add tests for rabbitmq_user module
* Add helper function for simulating collections.Counter functionality
Incorporating the abandoned work from PRs #35288 and #45552. Also adding in
the version checking from `docker_container.py`, which should be abstracted
out to `docker_common.py`.
* fix py3 scope for unique filter errors, enable filters integration tests on rhel8 beta
Signed-off-by: Adam Miller <admiller@redhat.com>
* add changelog
Signed-off-by: Adam Miller <admiller@redhat.com>
* create local subversion server for tests
* fix sanity issues
* don't touch system config when bringing up site
* removed original setup files
* fix opensuse config
* Changed $IpAddress to $Gateway
* Tweaked win_route unit tests
Checks to see if new static route has the correct gateway
* Create win_route.yaml
* Fixed incorrect variable name
* Fix for changes in clearlinux
clearlinux is now providing /etc/os-release file and ansible is identifying as NA
then this change allow ansible to find it
Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com>
* Add changelog fragment for clearlinux changes
Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com>
* Add parameters to module vmware_guest for conversion of disk to thin or thick when vm is cloned or deployed with template
* unit test for convert clone vm
Co-Authored-By: chris93111 <christopheferreira@ymail.com>
* Create python3and2
Adding tests to see if dnf still works when python-2 and python-3 are installed.
* Update main.yml
Include the tests that run on python 2 and python 3, based on the package manager.
* Update dnf.py
Use python3-dnf by default, otherwise python2-dnf.
* Rename python3and2 to python3and2.yml
Rename.
Matt Clay