* junos_facts refactor to work with resources modules
* Refactor junos_facts module to work with
network resource module.
* Fix unit test failures
* Fix review comments
* Skip gitlab tests if dependencies aren't met
* Skip certain unittests if passlib is not installed
* Fix tests with deps on paramiko to skip if paramiko is not installed
* Use pytest to skip for cloudstack
If either on Python-2.6 or the cs library is not installed we cannot run
this test so skip it
* nxos_vpc: pkl_vrf fixes for #57069Fixes#57069
- Symptom: When playbooks specify `pkl_vrf: default`, the result is that the cli does not set the `vrf` state.
- Analysis:
- First issue: 'default' is a reserved word when used with the `peer-keepalive` `vrf` keyword. It refers to the default rib.
- This is confusing in several ways because `peer-keepalive`'s *default* vrf is the `management` vrf.
- Second issue: When changing only one optional value (`pkl_vrf`) while other optional values are idempotent (`pkl_src`), the result is that the idempotent values are ignored; unfortunately the device cli *replaces* the entire command, in which case the idempotent values are removed.
- e.g. playbook specifies this:
```
{ pkl_dest: 10.1.1.1, pkl_src: 10.2.2.2, pkl_vrf: my_vrf }
```
```
peer-keepalive dest 10.1.1.1 src 10.2.2.2 # original
peer-keepalive dest 10.1.1.1 src 10.2.2.2 vrf my_vrf # intended result
peer-keepalive dest 10.1.1.1 vrf my_vrf # actual result
```
- Third issue: the `pkl` getter was relying on positional data. This broke when the `udp` keyword nvgen'd where `vrf` used to appear (shifting all keywords to the right).
- Tested on regression platforms: `N3K,N6k,N7K,N9K,N3K-F,N9K-F`
* PEP fixes
* PEP fix 2
* pkl should merge by default, not override
* rmv debugs
* add mike's tests
* fix comments
openvswitch_db was not parsing properly some arguments, which caused
some commands to be executed when they shouldn't. This commit fixesit
and adds unit testing for the usecase.
Closes-Bug: #55432
Closes-bug: #43858
* Add tests for KubeAPIVersion
* Legibility improvements for KubevirtVM tests
* Create units.utils.kubevirt with common stuff
* Add some VMIRS unit tests
* Improve error for docker modules when docker-py can't be imported.
* Add changelog.
* Mention platform and Python interpreter in more cases.
* Clarify wording.
* Adjust tests.
* nxos_bgp_neighbor: Add bfd support
- Add support for bfd state in nxos_bgp_neighbor
- Feature Pull Request
- nxos_bgp_neighbor
- Tested on platforms: `N3K,N6K,N7K,N9K`
* bfd T/F now bfd enable/disable
* pep fix ws
* Update dependence's name to firepower-kickstart
* Check response type before getting attributes
* Add unit test for construct_ansible_facts method
* Update error message
* Adding device_facts module for contribution
* changes added for pylint error
* Updated code to solve ansible-test compile error
* Changes to avoide comile error added
* Review Comments changes update
* Avoided blank line
* pylint error changes
* Removed ansible_facts return in error case
* Updated description
* modules renamed
* changing from ansible_facts to device_info
* avoide pep8 error
* Updated sample output
* version changed to 2.9
* Changed Copyright license to BSD
* Changed 3-clause BSD license to 2-clause BSD
* Added unit test support for ome_device_info
* version change
* removed pylint error in unit test modules
* Avoid Sanity error for unit test modules
* updated version
* nxos_interface_ospf: Add bfd support
Add support for `bfd` state in `nxos_interface_ospf`
- Feature Pull Request
`nxos_interface_ospf`
* Fix pep issues
* sanity loop: syntax
* bfd states changed from T/F to enable/disable/default
* doc hdr fixes
* nxos_bfd_global: initial commit
This is an initial POC with just a few commands included. The code has been written somewhat generically so that it can act as a best practices template for re-use in future modules. The implementation follows the yaml cmd_ref style to define each command's getter/setter/type/default. It supports platform-specific defaults.
The basic logic is to collect all relevant data in a `cmd_ref` dict and pass that around to various methods.
In the BFD case the devices don't provide JSON output so we have to screen-scrape with show runs.
BFD does not support present/absent states so there is no state param.
BFD has three different property types to handle. We can add add'l types as needed:
- int
- int_list (list of ints)
- str (needs support for 'no' keyword)
* Use get_capabilities to find platform type
* PR comment fixes, round 1
* Minor cleanups
* nxos_bfd_global: create NxosCmdRef in module_utils
This commit just takes the latest bfd global code and moves the bulk
of the code into new `class NxosCmdRef` in `module_utils/nxos/nxos.py`.
The only remaining code in `nxos_bfd_global.py` are the calls from `main()`.
* Add remaining command properties and documentation
* update argument_spec
* Add check for _exclude; add sanity test
* Add targets files for bfd
* Context and state absent updates
* Add dict support to cmd_ref
* Changed remaining list commands to dict usage
* Add idempotence check for dict
* Fix existing overwrite bug
* Move pattern matching logic into its own method
* add support for 'command: absent'
* Add `get_platform_shortname`; update BFD platform-specific settings
* /absent/deleted/
* /sh/show/ in prepare_nxos_tests
* add dict check to get_platform_shortname
* Add normalize_defaults()
* UTs for bfd_global
* support yaml for both py2/py3
* update cmd_ref doc header
* Fix python2.6 incompatibility with dict comprehensions
* Fix bfd_global doc header (yaml syntax fail)
* more shippable fixes
* yet more shippable fixes
* shippable: remove r' ' wrappers
* docfix - remove ':'
* escape regex ctl chars in yaml table
* remove extra blank lines
* Fix str(None) issue
* Command context updates
* import PY2,PY3 instead of import sys
* fix ordereddict import & parent_context
* try/except for yaml import
* fix import issue for ordereddict
* remove epdb
* nxosCmdRef_import_check() workaround for shippable
* fix PEP ws errors
* nxos_vlan: fix broken purge behavior (issue #57101)
Symptoms/Analysis:
- `nxos_vlan` `purge: true` would fail when `purge` was trying to delete all unspecified vlans, including vlan 1.
- `nxos` devices do not allow removing vlan 1 and raise a cli exception error
- Previous fix#55144 caused a side effect when `purge` was used: vlan changes specified by `aggregate` were ignored; e.g.
- vlan 4 is not present; playbook specifies `aggregate: { vlan: 4 }, purge: true`
- results in proper purging but vlan 4 is not created
Solutions:
- ignore vlan 1 when purging
- remove the `not purge` check from state present logic
Added additional unit tests and integration tests.
Tested against all regression platforms.
* PEP fixes
* Add agg_show_vlan_brief.txt fixture
* Add warning for removing vlan 1
* change method name check
* Returns zone ID for existing zone or `null`
* route53_zone: add module unit tests
* route53_zone: add compatibility with Python 2.6 to the unit tests
* route53_zone: address pycodestyle warning (add blank line)
* Adding New Model onyx_qos for Configuring QoS on Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_qos
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures phase 2
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Samer's Comments on onyx_qos Module
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Shippable Comments Phase 3
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Current Version 2.9
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Adding Support For EVPN in BGP Module
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_bgp.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_bgp.py Phase 2
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Samer's Comments
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Remove file Variable
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Adding Support for NVE Protocol in onyx_protocol
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_protocol.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Adding Support for Traffic Class in Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Enhancing the code and elemenating code duplicate
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Remove code but leave the metadata so that they can be listed as
removed in documentation.
* Remove removed modules from validate-modules ignore
* Remove unittests for the removed nodules
* Remove links to removed modules and add list of removed moduels to the
2.9 porting guide
* Adding Support For Vxlan In Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_vxlan.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_vxlan phase 2
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Shippable failures
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Samer's Comments on PR
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Adding New Model for Configure Buffer Pool on Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_buffer_pool.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* fix missing attribs with dirct module execution
* also make remote tmp handling smarter
update tests
* set default if attrib does not exist
* add simple test
* add asa_og module
* add test
* fix pep8
* fix some sanity pylint
* fix import error order
* fix import
* replace cmd() method
* rename file and class
* add mock for connection
* fix commands in replace test function
* fix lines list
* update unit test
* fix 'and' logic for port-object command
* restore previous unit test; fix pep8 and remove debug
* other unit tests
* Add state present, absent, replace
* Update doc; add default for state
* update unit test with state present/absent
* fix typo in unit test
* fix pep8 too many blank lines
* fix show run for service object ASA Ver 8.x
* Add description field; fix bug for state present and absent
* Re-designed module structure for network, service and port objects
* update integration test for new module structure
* fix pep8
* update EXAMPLES and RETURN
* update units tests
* fix module typos in unit test
* removed provider from examples
* fix missing comma in replace test
* fix module name and remove provider
* update license
* remove register; update license; change import order; chage def state
* remove shebang
* fix doc default state
* change import order
* Update year in banner
* fix integration test as set of tasks
* remove arg_spec
* remove extends_documentation_fragment: asa
* Update DOC, remove unused import, change import order
* Add latest updates from FTD Ansible downstream repository.
- add a better implementation of the upsert operation;
- add API version lookup functionality;
- add filter which remove duplicated references from the list of references;
- fix minor bugs.
* fix issues outlined by ansibot
* fix argument name for _check_enum_method
Currently, if we try to stop or start a network two time in a row, the
second call will fail. With this patch:
- we don't recreate a network, if it exists
- we only stop a network if it's active, and so we avoid an exception
saying the network is not active
* test: mock libvirt
* add integration tests for virt_net
* test: enable virt_net test on RedHat 7 and 8
* ci: use the unsupported alias
* tests that require privileged mode are run in VM
* virt_net/create raise unexpected libvirt exception
* import mock from units.compat
* virt_net: do not call create() on "active" network
* virt_net func test: only clean up the libvirt packages
* test: virt_net: don't use assert_called()
* virt_net: add the destructive alias
* move the test in virt_net dir
* test/virt_net: clean up the network at the end
* Add to_ipv6_subnet function
* Use the correct function for subnet
* Corrected code style and tests
* Corrected testcase assertion
64 bits make 8 octets, or 4 hextets
* Import from correct module directly
* Add support for multiple IPv6 addresses in nxos_l3_interface module
Cisco support multiple IPv6 addresses on each interface but only the first
IPv6 is considered by this module. There is no impact on the configuration
but the module is not idempotent.
* Add internal support for IPv6 list
* Fix module idempotency
* Initialize tests for nxos_l3_interface
* Fix IPv4 removal idempotency
* Fix data extraction from nxos config
* Fix silently ignored interfaces in nxos_l3_interface
* Add warning when interface does not exist in nxos config
* Adding cnos_user module to Ansible
* Update cnos_user.py
* Adding Functional test cases and unit test cases.
* Fixing Bug found in testing with Lenovo Mars.
* Review comments incorporated
* Review comments implemented.
* Copy paste mistake
* Modify EXOS module utils to utilize 'httpapi' or 'network-cli' connection
* Changes to cliconf plugin to support 'json' or 'text' output for compatibility between network-cli and httpapi
* Add HTTPAPI plugin supportng JSONRPC and RESTCONF for EXOS
* exos_facts modify commands with run script cli2json.py to command dictionary specifying 'json' output
Load appropriate fixtures
* Update exos_config module to utilize the get_diff and get_default_flag functionality.
JSONRPC doesn't work well with pipes, regex MULTILINE
* Support for NOS agnostic 'cli_config' module by implementing 'get_default_flag' and 'get_diff' functionality
* Update Ansible Documentation regarding the connections available for EXOS
* nxos_interfaces_ospf: fix passive-interface states & check_mode
This fix addresses issues #41704 and #45343.
The crux of the problem is that `passive-interface` should have been treated as a tri-state value instead of a boolean.
The `no` form of the command disables the passive state on an interface (allows it to form adjacencies and send routing updates). It's essentially an override for `passive-interface default` which enables passive state on all OSPF interfaces.\*
This `no` config will be present in `running-config`.
\**See `router ospf` configuration.*
Since both enable and disable states are explicit configs, the proper way to remove either of these is with the `default` syntax.
Passive-interface config syntax:
```
ip ospf passive-interface # enable (nvgens)
no ip ospf passive-interface # disable (nvgens)
default ip ospf passive-interface # default (removes config, does not nvgen)
```
Code changes:
* `passive_interface` param changed from boolean to string, restricted to `true`,`false`,`default`.
* Several passive-interface specific checks were added because the existing module logic tends to test for true or false and doesn't handle the None case.
* Fixed `check_mode`.
Sanity verified on: N9K,N7K,N3K,N6K
* Fix doc header
* Unit tests for passive-interface
* doc fix#2
* Fix indent for SA
* Remove 'default' keyword, restore bool behavior
* remove changes to sanity
* Add Bitbucket pipelines variable module
* Add tests
* Remove parameters check for `absent` state
* Update version_added documentation field
* Minor fixes
* A few additional cosmetic changes
* Move to source_control
* Rename lib/ansible/modules/source_control/bitbucket_pipelines_variable.py to lib/ansible/modules/source_control/bitbucket/bitbucket_pipelines_variable.py
* Reflect directory change
* Move these imports as well
* Rename 'key' parameter (API) to 'name' (GUI)
* Add missing __init__.py files to mark modules
* Rename module (pipeline should be singular)
* Adjust module references and variable names after renaming
* Mention Docker SDK for Python instead of docker-py / docker.
* Docs fixes.
* Add myself as docker_container author.
* Use array syntax for running command.
* Break long lines.
* Avoid failure when docker_version is None.
* Improve docker-py vs. docker note in requirements.
* Canonicalize Docker SDK for Python upgrade instructions.
* Split long line.
* Make it clearer which hostnames are meant.
* Adding cnos_system module to Ansible.
* Adding UT, Functional test required for cnos_system. Bugs came up are fixed
* Adding more files to the cnos_system suit.
* Remove nose from unittests
This PR migrates the last of our unittests from using nose to using
pytest. We don't need to install nose in our testing environments
anymore
Adds variable types to docs
Refactors unit tests to remove deprecated parameters
Adds missing Return values to documentation
Removes deprecated modules unit tests
adds ha order, ha group and ha load as failover types
refactors main() function and module manager to accomodate new patterns
updates docs
refactors unit tests
Refactors main() function and module manager in multiple modules in line with recent changes
Adds variable types to docs
Refactors unit tests to remove deprecated parameters
* Revert "changes to clusteR"
This reverts commit 33ee1b71e4bc8435fb315762a871f8c4cb6c5f80.
* Revert "changes to clusteR"
This reverts commit 33ee1b71e4bc8435fb315762a871f8c4cb6c5f80.
* Revert "Revert "changes to clusteR""
This reverts commit f1104a37b4.
* Revert "Revert "changes to clusteR""
This reverts commit f1104a37b4.
* documentation changes
* Revert "documentation changes"
This reverts commit 02c369d0414fdff492d90865c903bdade3174261.
* Issue with port being removed and added on modify
* adds function to do version checks for bigiq
* adds version limitation to bigiq application modules
Refactors main() function and module manager in multiple modules in line with recent changes
Adds variable types to docs
Refactors unit tests to remove deprecated parameters
* Moving comparision functions to compare.py from common.py
* Refactors main() function and module manager in multiple modules in line with recent changes
Adds variable types to docs
Refactors unit tests to remove deprecated parameters
* Moving comparision functions to compare.py from common.py
* fixes issue with data group elements containing IPs with Route Domains
refactors main() function and module_manager to accomodate new patterns
updates doc variables
Refactors main() function and module manager in multiple modules in line with recent changes
Adds variable types to docs
Refactors unit tests to remove deprecated parameters
* Pluribus Networks network cli terminal and cliconf plugins
* Changes in Unit tests and modules according to network_cli connection
* Changes in Unit tests and modules according to network_cli connection
When user specifies the JUMP value to 'tee', gateway is required.
This fix adds new parameter 'gateway' to support this functionality.
Fixes: #53170
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Revert "changes to clusteR"
This reverts commit 33ee1b71e4bc8435fb315762a871f8c4cb6c5f80.
* Fix issue and unit tests
* update to firewall
* fix import issues
* Revert "Revert "changes to clusteR""
This reverts commit 2713c75f31.
* fix docs
* stop pylint on unicode line, line can only be run in python2
* Review comment
* add pylint skip
* add pylint skip
* initial commit
* fixed the linting and requests error
* updated test file setup
* updated code as per feedback
* updated test import
* updated test import with unittest
* updated validate certs for https
* updated after pep8 test
* removed under-construction remark
* Initial commit
* removed type for tests
* removed types and added ssl compatibility
* applied return type
* applied return type as dict instead of obj
* applied types in eact field
* tested with a playbook
* modified owner
* added unit test
* following pep8 guidelines
* added mock and unittest separately
* Sanity check using pep8
* added full path on patch
* ios_logging: fix the error checking the existence of "host" destinations (IOS 12)
In the "have" list, records of type "host" do not contain the key "size",
although in the list "want" it is always there. Because of this, the module
assumes that the "host" type destinations is not configured and does it again.
This does not change the configuration on the device, but is redundant and
the status of the task will always be "changed". This patch fixes it.
* ios_logging: fixes#53227
* ios_logging: minor changes in string matching
* Added storage modules and unit tests
Removed unnecessary file
Fixing pep8 issues
Adding reusable documentation to the data fragment file
Fixing issues reported by module validation in documentation
Fixed issues: 10549, 10553
Fixed unit tests
Added future imports and removed license from init py file
Resolved import issue reported by ansible sanity test
Fixed unit tests
Adding CPG management module
Fixing sanity test issues
Resolving line ending issues
Resolved import issue reported by ansible sanity test
Correcting the error message when resource is more than 31 char
Update hpe3par_cpg.py
Fix for defect 10556: Unable to modify volume. Persona not set
Fix for defect 10556: Unable to modify volume. Persona not set
Fixing pep8 changes
Fixed pep8 issues
Added more pep8 related fixes
Added more pep8 related fixes
Fixed rebase issue in cps test
Adding GPL3.0+ License (#7)
* Update hpe3par.py
* Update hpe3par_cpg.py
* Update hpe3par_cpg.py
Adding GPLV3+ only license
Fix anity test
Addressing review comments
Fixing undefined variable error
Addressed review comments and added more unit tests (#8)
Added maintainers
Fixed sanity test
Update test_hpe3par_cpg.py
Renamed the module as per the review comments (#9)
* Added maintainers
* Renaming the module to remove the vendor name from the module
* remove pep8 related issues
Modify the requirements to add version of 3par sdk
Review address (#10)
* Unit is no longer a different paramter in the task
* Fixing unit tests
* Taking into account the default values
Fixing issue with default values
fixing unit test
Adding more flexibility and checks to the size and it's units
Fixed pylint extra line issue
Fixing conflicts in BOTMETA.yml
Made changes according to the review comments
Updating ansible version
Refactored the code to move reusable method to module utils
Modified the GPLv3+ license text according to the review comments. Modified the module utils license to BSD
Corrected the BOTMETA entry. Fixed the pep8 issues
Fixing entries in BOTMETA.yml
Removed ansible version, renamed the version to address the name review comments
Reverting name change for module to revert test failures
Set size and raid type and now reuqired together based on the review comment
Fixed unit tests
Removing default value as raid and set size are now required together
Renaming the modules to ss_3par_*
Resolving the pep8 issues
Added storage modules and unit tests
Removed unnecessary file
Fixing pep8 issues
Adding reusable documentation to the data fragment file
Fixing issues reported by module validation in documentation
Fixed issues: 10549, 10553
Fixed unit tests
Added future imports and removed license from init py file
Resolved import issue reported by ansible sanity test
Fixed unit tests
Adding CPG management module
Fixing sanity test issues
Resolving line ending issues
Resolved import issue reported by ansible sanity test
Correcting the error message when resource is more than 31 char
Update hpe3par_cpg.py
Fix for defect 10556: Unable to modify volume. Persona not set
Fix for defect 10556: Unable to modify volume. Persona not set
Fixing pep8 changes
Fixed pep8 issues
Added more pep8 related fixes
Added more pep8 related fixes
Fixed rebase issue in cps test
Adding GPL3.0+ License (#7)
* Update hpe3par.py
* Update hpe3par_cpg.py
* Update hpe3par_cpg.py
Adding GPLV3+ only license
Fix anity test
Addressing review comments
Fixing undefined variable error
Addressed review comments and added more unit tests (#8)
Added maintainers
Fixed sanity test
Update test_hpe3par_cpg.py
Renamed the module as per the review comments (#9)
* Added maintainers
* Renaming the module to remove the vendor name from the module
* remove pep8 related issues
Modify the requirements to add version of 3par sdk
Review address (#10)
* Unit is no longer a different paramter in the task
* Fixing unit tests
* Taking into account the default values
Fixing issue with default values
fixing unit test
Adding more flexibility and checks to the size and it's units
Fixed pylint extra line issue
Fixing conflicts in BOTMETA.yml
Made changes according to the review comments
Updating ansible version
Refactored the code to move reusable method to module utils
Modified the GPLv3+ license text according to the review comments. Modified the module utils license to BSD
Corrected the BOTMETA entry. Fixed the pep8 issues
Removed ansible version, renamed the version to address the name review comments
Reverting name change for module to revert test failures
Set size and raid type and now reuqired together based on the review comment
Fixed unit tests
Removing default value as raid and set size are now required together
Renaming the modules to ss_3par_*
Resolving the pep8 issues
Update lib/ansible/modules/storage/hpe3par/ss_3par_cpg.py
Co-Authored-By: farhan7500 <farhan7500@gmail.com>
Update lib/ansible/modules/storage/hpe3par/ss_3par_cpg.py
Co-Authored-By: farhan7500 <farhan7500@gmail.com>
Fixed rebase issue
Fixed rebase issuein BOTMETA.yml
* Modified the documentation based on the review comments
* Fixed the pep8 sanity issue
* Moved the doc fragment file based on latest changes
* Reverting inadvertent rebase changes
* Fixed inadvertent change during rebase
* added validate_certs paramter to allow for ignoring of SSL certificates
* formatting
* updated NSO unit tests with validate_certs variable
* fixed NSO tests
* changes to clusteR
* changes to clusteR
* Revert "changes to clusteR"
This reverts commit 33ee1b71e4bc8435fb315762a871f8c4cb6c5f80.
* Revert "changes to clusteR"
This reverts commit 33ee1b71e4bc8435fb315762a871f8c4cb6c5f80.
* new module na_ontap_vscan_on_access_policy
* update author
* remove blank trys'
* switch to int
This PR includes:
- Adding parameter types
- Fix validate-modules issue
- Improve parameter types and resulting changes
This PR needs to be verified and tested by maintainer(s).
* changes to clusteR
* Revert "changes to clusteR"
This reverts commit 33ee1b71e4bc8435fb315762a871f8c4cb6c5f80.
* Add vscan on demand task
* fix author line
* changes to clusteR
* Revert "changes to clusteR"
This reverts commit 33ee1b71e4bc8435fb315762a871f8c4cb6c5f80.
* allow for more than 1 time to be set
* move file to correct directory
* Ansibot fixes
* changes to clusteR
* Revert "changes to clusteR"
This reverts commit 33ee1b71e4bc8435fb315762a871f8c4cb6c5f80.
* Rewrite of user roles
* Rewrite of user roles
* Fix author tag
* update
* fix author
* Revert "changes to clusteR"
This reverts commit 33ee1b71e4bc8435fb315762a871f8c4cb6c5f80.
* New module Flexcache
* update documentation string, and copyright date
* fix issues
* Revert "Revert "changes to clusteR""
This reverts commit 4dab6f7607.
* New LUKS devices management module
- new module that uses cryptsetup (LUKS) functions for management
of encrypted devices
- unit tests included
* New LUKS devices management module
- modified interface by removing 'open' option and moving its functionality
into 'state' option
* Initial commit for xenserver_guest_facts module
* New module: xenserver_guest_facts. Returns facts of XenServer VMs. Module is fully documented.
* Added unit tests for the module
* Moved FakeXenAPI import to a dedicated fixture, other fixes
* Removed unused imports, minor fixes to unit test code
* Enable 'changed' var with ufw check mode
* Fix from comment of the PR + Unit Test
* Fix on ufw module after the second review
- delete rules change works in check mode
- simplify execute def & use it on every call process
- improved regexp
- rename vars defaults to current_default_values
* Add ignore error to execute() and use it in get_current_rules()
* Update after third code review (introduce change in changed status)
* Adjust tests and fix some problems (#1)
* 'active' also appears in 'inactive'.
* 'reject' is also a valid option here.
* For example for reloaded, changed will be set back to False here.
* Improve and adjust tests.
* Fix after merging integration test
* handle "disabled" on default routed
* Add /var/lib/ufw/.. rules files
* add unit test
* Fix pep8 formatting error
* Separate ipv6 and ipv4 rules process from checkmode
* fix non-ascii error on ci
* Some change after review
* Add unit test with sub network mask
* rename is_match function by is_starting
* add changelog fragment
* gitlab_hook: renaming module name
* gitlab_hook: rename module in documentation
* gitlab_hook: remove plural in docs and code
* gitlab_hook: fix unit test functions
* Move docker_ module_utils into subpackage.
* Remove docker_ prefix from module_utils.docker modules.
* Adding jurisdiction for module_utils/docker to $team_docker.
* Making docker* unit tests community supported.
* Linting.
* Python < 2.6 is not supported.
* Refactoring docker-py version comments. Moving them to doc fragments. Cleaning up some indentations.
* gitlab_group: refactor module
* gitlab_user: refactor module
* gitlab_group, gitlab_user; pylint
* gitlab_project: refactor module
* gitlab_group, gitlab_project, gitlab_user: Enchance modules
- Add generic loop to update object
- Enchance return messages
- PyLint
* gitlab_runner: refactor module
* gitlab_hooks: refactor module
* gitlab_deploy_key: refactor module
* gitlab_group: enchance module and documentation
- Enchange function arguments
- Add check_mode break
- Rewrite module documentation
* gitlab_hook: enchance module and documentation
- Rewrite documentation
- Enchance function parameters
- Rename functions
* gitlab_project: enchance module and documentation
- Rewrite documentation
- Enchance function parameters
- Add try/except on project creation
* gitlab_runner: enchance module and documentation
- Rewrite documentation
- Fix Copyright
- Enchance function arguments
- Add check_mode break
- Add missing function: deletion
* gitlab_user: enchance module and documentation
- Rewrite documentation
- Enchance function parameters
- Add check_mode break
- Add try/except on user creation
* gitlab_deploy_key, gitlab_group, gitlab_hooks, gitlab_project,
gitlab_runner, gitlab_user: Fix residual bugs
- Fix Copyright
- Fix result messages
- Add missing check_mode break
* gitlab_deploy_key, gitlab_group, gitlab_hooks, gitlab_project, gitlab_runner, gitlab_user: pylint
* gitlab_runner: Add substitution function for 'cmp' in python3
* unit-test: remove deprecated gitlab module tests
- gitlab_deploy_key
- gitlab_hooks
- gitlab_project
Actually, they can't be reused because of the modification of the way that the module communicate with the Gitlab instance. It doesn't make direct call to the API, now it use a python library that do the job. So using a pytest mocker to test the module won't work.
* gitlab_deploy_key, gitlab_group, gitlab_hooks, gitlab_project, gitlab_runner, gitlab_user: add copyright
* gitlab_deploy_key, gitlab_group, gitlab_hooks, gitlab_project, gitlab_runner, gitlab_user: Support old parameters format
* module_utils Gitlab: Edit copyright
* gitlab_deploy_key, gitlab_group, gitlab_hooks, gitlab_project,
gitlab_runner, gitlab_user: Unifying module inputs
- Rename verify_ssl into validate_certs to match standards
- Remove unused alias parameters
- Unify parameters type and requirement
- Reorder list order
* gitlab_deploy_key, gitlab_group, gitlab_hooks, gitlab_project, gitlab_runner, gitlab_user: Unifying module outputs
- Use standard output parameter "msg" instead of "return"
- Use snail_case for return values instead of camelCase
* validate-module: remove sanity ignore
* BOTMETA: remove gitlab_* test
- This tests need to be completely rewriten because of the refactoring
of these modules
- TodoList Community Wiki was updated
* gitlab_user: Fix group identifier
* gitlab_project: Fix when group was empty
* gitlab_deploy_key: edit return msg
* module_utils gitlab: fall back to user namespace is project not found
* gitlab modules: Add units tests
* unit test: gitlab module fake current user
* gitlab_user: fix access_level verification
* gitlab unit tests: use decoration instead of with statement
* unit tests: gitlab module skip python 2.6
* unit tests: gitlab module skip library import if python 2.6
* gitlab unit tests: use builtin unittest class
* gitlab unit tests: use custom test class
* unit test: gitlab module lint
* unit tests: move gitlab utils
* unit test: gitlab fix imports
* gitlab_module: edit requirement
python-gitlab library require python >= 2.7
* gitlab_module: add myself as author
* gitlab_modules: add python encoding tag
* gitlab_modules: keep consistency between variable name "validate_certs"
* gitlab_modules: enchance documentation
* gitlab_runner: fix syntax error in documentation
* gitlab_module: use basic_auth module_utils and add deprecation warning
* gitlab_module: documentation corrections
* gitlab_module: python lint
* gitlab_module: deprecate options and aliases for ansible 2.10
* gitlab_group: don't use 'local_action' is documentation example
* gitlab_module: correct return messages
* gitlab_module: use module_util 'missing_required_lib' when python library is missing
* gitlab_module: fix typo in function name.
* gitlab_modules: unify return msg on check_mode
* gitlab_modules: don't use deprecated options in examples
* ios_ntp module
* add execute_module for config func
* fix units test
* test empty list
* update example
* change want logic to follow have - removed try/except
* update commands list for config test
* add idempotent test case
* add more test
* changes to clusteR
* Revert "changes to clusteR"
This reverts commit 33ee1b71e4bc8435fb315762a871f8c4cb6c5f80.
* na ontap vscan scanner pool
* Update author
* Add support for multiple sshkeys
Signed-off-by: NilashishC <nilashishchakraborty8@gmail.com>
* Fix CI
Signed-off-by: NilashishC <nilashishchakraborty8@gmail.com>
* Add the keys at on go
Signed-off-by: NilashishC <nilashishchakraborty8@gmail.com>
* Update tests
Signed-off-by: NilashishC <nilashishchakraborty8@gmail.com>
* changes to clusteR
* Revert "changes to clusteR"
This reverts commit 33ee1b71e4bc8435fb315762a871f8c4cb6c5f80.
* new module na_ontap_portset
* Fix author
* fix issue from comment
* Fix 'defaults' option in the nxos_config module
Nxos get_config is allways called with the 'all' option.
* Fix flag's calculation
* Add tests
* nxos_config: the 'backup' option take into account the value of 'defaults' option
If 'defaults' option is true, the running-config backup is done with the all
keyword.
* added timestamps to nxos_command module
nxos_command module now returns timestamps field, which shows command execution time
* fixed unit test failure for /lib/ansible/module_utils/basic
* cosmetic changes to align with PEP 8
* Pluribus Networks port cos bw module
* Indentation fix
* Documentation fix
* Corrected indetentation for required_one_of
* Added maintainer name in BOTMETA.yml
* Removed maintainer name in BOTMETA.yml as my team is already there
* Fix Issue #39598
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix unit test for onyx_config
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Add comments for save running config
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Enhance onyx_config bug fix
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix result['changed'] = True comment
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Refactoring of cnos_interface module like what followed by other vendors
* To remove cnos-interface from E326 validation ignore list
* Effect of default parameters impacted UT
* In some cases, it appears that Exception should have been used instead
as there's no need to catch sys.exit KeyboardInterrupt and similar.
* In a few cases, it appears that BaseException is used because
a library we depend on calls sys.exit() contrary to good coding
design. Comment those so that we know that those have been audited
and found to be correct and change to use (Exception, SystemExit)
instead.
This work enables to add sit tunnel via nmcli module
Signed-off-by: Susant Sahani susant@redhat.com
SUMMARY
ISSUE TYPE
Feature Pull Request
COMPONENT NAME
nmcli
ANSIBLE VERSION
2.8
ADDITIONAL INFORMATION
- nmcli:
state: present
type: sit
conn_name: sit_test1
autoconnect: yes
ip_tunnel_dev: enp0s8
ip_tunnel_local: 192.168.1.2
ip_tunnel_remote: 192.168.1.5
- Require username and password for unregistering and avoid "cannot marshal None unless allow_none is enabled" error when using an activation key and no channels specified.
- Update test fixtures and add changelog
Co-authored-by: WhyIsThisOpen <WhyIsThisOpen@users.noreply.github.com>
* Pluribus Networks pn access list ip module with unit test cases
* Changes according to ansibot standards in unit test modules
* Remove unwanted variables
* Removed unwanted super call
* Simplify permission changing code for rabbitmq_user module
* Add check for multiple permission dicts for same host to rabbitmq_user module
* Add docstring for _get_permission method of rabbitmq_user
* Fix method that compares vhost permissions in rabbitmq_user
* Add tests for rabbitmq_user module
* Add helper function for simulating collections.Counter functionality
* add redshift_cross_region_snapshots module, unit tests.
* fix errors
* use ec2_argument_spec as the basis for the argument spec. fixed
metadata_version
* follow best practices by naming example tasks.
* code review changes
* fix linting errors
* Update version added
* add new options for na_ontap_aggregate
* add gpl line
* remove dup option
* Put files in wrong directory
* change unit test to match the request from PR 48941
* Changed for review comments
* pep8
* Initial Commit
* Initial Commit
* Initial Commit
* Fixing syntax errors
* After running sanity tests, fixed pylint and pep8 errors
* After running sanity tests, fixed pylint and pep8 errors
* Fixing more syntax issues
* Fixing more syntax issues
* Adding username to doc block
* PR candidate
* PR candidate
* fixed pep8 and docs issues
* fixed 2.6 function issues
* fixed 2.6 function issues part duex
* Initial commit for security profile group module
* Adding better playbook example to module
* Adding another commit to test shippable tests
* Fixing shippable errors, pep8 in unit test file and doc block problem in main module
* Fixing documentation module error
* Fixing pep8 line too long in unit test
* Fixing utility function with nested dictionaries
* Fixing utility function with pep8 issue
* Adding change to allow for multiple list of dictionaries to be submitted via a single playbook
* Fixing review changes
* Adding @ in author names per @Gundalow's request per Ansible's guidelines
* Initial Commit
* Initial Commit
* Initial Commit
* Fixing syntax errors
* After running sanity tests, fixed pylint and pep8 errors
* After running sanity tests, fixed pylint and pep8 errors
* Fixing more syntax issues
* Fixing more syntax issues
* Adding username to doc block
* PR candidate
* PR candidate
* fixed pep8 and docs issues
* fixed 2.6 function issues
* fixed 2.6 function issues part duex
* Initial commit for security profile group module
* Adding better playbook example to module
* Initial commit for FMG DNS security profile
* Fixing pep8 line too long in unit test
* Removing excess modules and unit tests
* Fixing trailing white space for dns module
* Fixing utility function with nested dictionaries
* Fixing utility function with pep8 issue
* Adding change to allow for multiple list of dictionaries to be submitted via a single playbook
* Fixing review changes
* Adding @ in author names per @Gundalow's request per Ansible's guidelines
* Needs unit test fix -- the "delete" calls a GET command and another function to get policy ID of a firewall policy before deleting it. Nested functions like this, where a GET occurs to determine a new call, breaks the unitTestGen output. Need to figure out what's going on, and adjust the generator.
* PR Candidate
* PR Candidate (fixes)
* Reverting
* Fixing Edits.
* Fixing Authors - Fixing Requested Changes
* Initial Commit
* Initial Commit
* Initial Commit
* Fixing syntax errors
* After running sanity tests, fixed pylint and pep8 errors
* After running sanity tests, fixed pylint and pep8 errors
* Fixing more syntax issues
* Fixing more syntax issues
* Adding username to doc block
* PR candidate
* PR candidate
* fixed pep8 and docs issues
* fixed 2.6 function issues
* fixed 2.6 function issues part duex
* Initial commit for security profile group module
* Adding better playbook example to module
* Adding another commit to test shippable tests
* Fixing shippable errors, pep8 in unit test file and doc block problem in main module
* Fixing documentation module error
* Fixing pep8 line too long in unit test
* Fixing utility function with nested dictionaries
* Fixing utility function with pep8 issue
* Adding change to allow for multiple list of dictionaries to be submitted via a single playbook
* Initial commit for FMG Security Profile Web Application Firewall
* adding extra line at bottom for pep8 conditions
* Adding descriptions to documentation
* Fixing more pep8 issues
* New commit for new PR
* Removing todo in documentation
* Changing module name in documentation to match actual module name
* Fixing yaml syntax for long choices list
* Fixing yaml syntax for long choices list
* Fixing review changes
* Adding @ in author names per @Gundalow's request per Ansible's guidelines
* Initial Commit
* Initial Commit
* Initial Commit
* Fixing syntax errors
* After running sanity tests, fixed pylint and pep8 errors
* After running sanity tests, fixed pylint and pep8 errors
* Fixing more syntax issues
* Fixing more syntax issues
* Adding username to doc block
* PR candidate
* PR candidate
* fixed pep8 and docs issues
* fixed 2.6 function issues
* fixed 2.6 function issues part duex
* Initial commit for security profile group module
* Adding better playbook example to module
* Adding another commit to test shippable tests
* Fixing shippable errors, pep8 in unit test file and doc block problem in main module
* Fixing documentation module error
* Fixing pep8 line too long in unit test
* Fixing utility function with nested dictionaries
* Fixing utility function with pep8 issue
* Adding change to allow for multiple list of dictionaries to be submitted via a single playbook
* Initial commit for FMG Security Profile Web Application Firewall
* adding extra line at bottom for pep8 conditions
* Adding descriptions to documentation
* Fixing more pep8 issues
* New commit for new PR
* Removing todo in documentation
* Changing module name in documentation to match actual module name
* Fixing yaml syntax for long choices list
* Fixing yaml syntax for long choices list
* Initial commit for fmgr web filter security profile
* Fixing pep8 syntax issues
* Fixing documentation yaml syntax errors with choices on new lines
* Fixing documentation yaml syntax errors, removing Todo comments
* Fixing choices additional tab
* Fixing choices on multiple lines
* Fixing choices on multiple lines
* Adding yaml block scalar for multiline choices
* Changing YAML syntax for multiline to YAML sequence for choices
* Fixing all sanity test errors
* Fixing review changes
* Adding @ in author names per @Gundalow's request per Ansible's guidelines
* Initial Commit
* Initial Commit
* Initial Commit
* Fixing syntax errors
* After running sanity tests, fixed pylint and pep8 errors
* After running sanity tests, fixed pylint and pep8 errors
* Fixing more syntax issues
* Fixing more syntax issues
* Adding username to doc block
* PR candidate
* PR candidate
* fixed pep8 and docs issues
* fixed 2.6 function issues
* fixed 2.6 function issues part duex
* Initial commit for security profile group module
* Adding better playbook example to module
* Adding another commit to test shippable tests
* Fixing shippable errors, pep8 in unit test file and doc block problem in main module
* Fixing documentation module error
* Fixing pep8 line too long in unit test
* Fixing utility function with nested dictionaries
* Fixing utility function with pep8 issue
* Adding change to allow for multiple list of dictionaries to be submitted via a single playbook
* Initial commit for FMG Security Profile Web Application Firewall
* adding extra line at bottom for pep8 conditions
* Adding descriptions to documentation
* Fixing more pep8 issues
* New commit for new PR
* Removing todo in documentation
* Changing module name in documentation to match actual module name
* Fixing yaml syntax for long choices list
* Fixing yaml syntax for long choices list
* Initial commit for fmgr web filter security profile
* Initial commit for SSL and SSH security profiles in FMG
* Fixing pep8 syntax issues
* Adding better playbook example
* Fixing review changes
* Adding @ in author names per @Gundalow's request per Ansible's guidelines
* FTD modules: bug fixes and upsert functionality
* Fix sanity checks
* Fix unit tests for Python 2.6
* Log status code for login/logout
* Use string formatting in logging
This will allow tests to be carried out condtionally if necessary
using regexp include and/or exclude filters
Reorganize imports into alphabetical order for easier insertion
Toshio Kuratomi