After changes:
```
"ansible_locally_reachable_ips": {
"ipv4": [
"127.0.0.0/8",
"127.0.0.1",
"192.168.0.1",
"192.168.1.0/24"
],
"ipv6": [
"::1",
"fe80::2eea:7fff:feca:fe68",
...
]
},
```
192.168.1.0/24 is a local prefix, where any IP address inside this range
is reachable locally (or outside this host if this prefix is announced via
EGP/IGP).
Signed-off-by: Donatas Abraitis <donatas.abraitis@hostinger.com>
When running the unit tests locally, in a git clone, `ansible --test`
prints additional information about the git revision, e.g.
```
~/src/ansible$ ansible --version
ansible 2.10.8
...
~/src/ansible$ source hacking/env-setup
...
Setting up Ansible to run out of checkout...
...
~/src/ansible$ ansible --version
[WARNING]: You are running the development version of Ansible. You
should only run Ansible from "devel" if you are modifying the Ansible
engine, or trying out features under development. This is a rapidly
changing source of code and can become unstable at any point.
ansible [core 2.14.0.dev0] (test_ansible_version-devel df497ea13b) last
updated 2022/08/25 10:37:07 (GMT +100)
...
```
which causes `test_ansible_version()` to fail.
Also removed an unused argument from previous parameterisation.
Co-authored-by: Alex Willmer <alex.willmer@cgi.com>
* Add --offline option to 'ansible-galaxy collection install' to prevent querying distribution servers
This allows installing/upgrading individual tarfiles to have dependency resolution.
Previously needed to be done manually with --no-deps or else all collections and dependencies needed to be included in the requirements.
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* Add OSMC to Debian OS_FAMILY_MAP
- os_family fact of the Debian-based OSMC distribution was not detected correctly
* tweak changelog
Co-authored-by: Matt Davis <6775756+nitzmahone@users.noreply.github.com>
* new _fqcn attribute to plugin objects
* unbreak plugins in subdirs
* Fix inadventent changes to _load_name and use existing vars
* add plugin aliases and name property, and replace plugin._load_name where incorrect
* Fix listing plugin names
Fix listing legacy and builtin together
test deprecated plugin documentation
fix doc extensions
remove sometimes inaccurate _load_name handling from plugin.name
* Add tests for REJECT_EXTS and doc extensions
Fix unpredictable collection redirects so non-fqcns in the redirect list are guaranteed to be legacy (instead of determined by the collections keyword)
Move aliases and name properties to _update_object so all plugin types, including doc fragments, can use them
* make legacy plugin names internally consistent
* rename attributes to ansible_name and ansible_aliases
* Fix distro fact handling for Flatcar
The existence of the file /etc/flatcar/update.conf depends on
bootstrap configuration typically provided by the user. For that
reason this file is unsuitable for determining distro facts for
Flatcar Container Linux.
The distribution_release fact is meaningless in the case of Flatcar
since Flatcar doesn't have named releases. The distribution_version
fact, however, IS meaningful and should contain a number such as
"3139.2.0".
- Use /etc/os-release instead of /etc/flatcar/update.conf.
- Drop the distribution_release fact.
- Set the distribution_version fact.
- Update distro test fixture for Flatcar
- Generate the fixture using gen_distribution_version_testcase.py.
- Override result.distribution and result.os_family manually as the
generator script gives wrong values.
- Use a recent Flatcar version.
Signed-off-by: Johanan Liebermann <jliebermann@microsoft.com>
* refactor and remove redundant code in documentation
allow location and building api to be more accessible
fix issues with displaying ansible.legacy and ansible.builtin
ensure we don't x2 process tokens (some modules reference them also) fixes#77764
move to constants vs hardcoded
more informative errors and comments
now have actual filter/test plugins, which expose the filter/test functions
moved filter/test loading/finding logic into jinja2pluginloader, removed dupe implementations
added tests for case in which we unique by basename when listing
Update lib/ansible/utils/plugin_docs.py
Co-authored-by: Sloane Hertel <19572925+s-hertel@users.noreply.github.com>
Sometimes pytest errors out with an `ImportError` during its tests
collection stage when a Python package/directory containing the test
module does not have an `__init__.py` in it. This is being observed
under Python 3.9 and higher.
The patch provides a workaround for this problem but does not address
the root cause which is currently unknown.
Ref:
https://github.com/ansible/ansible/pull/78585#issuecomment-1220885431
* add required file to collection skeleton
This file is required to be able to upload a collection.
It is present in
https://github.com/ansible-collections/collection_template/blob/main/meta/runtime.yml
but that does not get used by default.
Without this, if you use the "ansible-galaxy collection init" command
and you try and publish that collection without adding this file, you
get the error:
"ERROR! Galaxy import process failed: 'requires_ansible' in
meta/runtime.yml is mandatory, but no meta/runtime.yml found (Code:
UNKNOWN)"
Also updates relevant test and adds a changelog fragment
Replace get_persistent_connection_options with get_options
Remove special case for network sub_plugin in _set_plugin_options
Try to avoid mock connection pretending to be persistent
Rename variables->options to reflect what they actually are
Gather options for ssh_type_conn on network_cli
Drop reliance on sub_plugin["type"]
* Rethread pr/70185 through the dependency resolver
Hang optional metadata toggle on the ConcreteArtifactsManager instead of threading it through whole list codepath
Don't error while listing collections if a collection's metadata is missing keys required for building a collection.
Give an informative warning if metadata has been badly formatted.
Co-authored-by: Sam Doran <sdoran@redhat.com>
* Report OpenSuSE >= 15 as opensuse
Make distro.id() report newer versions of OpenSuSE (at least >=15) also report
as opensuse. They report themselves as opensuse-leap.
* Add a test
* Fix KeyError for ansible-galaxy when caching paginated responses from v3
* changelog
* generate responses in loop for test
Co-authored-by: Matt Martz <matt@sivel.net>
- `processor_count` was erroneously set to the number of cores
- `processor_cores` was erroneously set to the number of threads per core
- `processor_vcpus` and `processor_threads_per_core` were not set
- `processor` was a string, while it's supposed to be a list
Before:
```
"ansible_processor": "PowerPC_POWER7",
"ansible_processor_cores": 4,
"ansible_processor_count": 12,
```
After:
```
"ansible_processor": [
"PowerPC_POWER7"
],
"ansible_processor_cores": 12,
"ansible_processor_count": 1,
"ansible_processor_threads_per_core": 4,
"ansible_processor_vcpus": 48,
```
Also add a unit test.
Co-authored-by: Baptiste Jonglez <git@bitsofnetworks.org>
* Fix workding for :ref|term: subsitution
now matches 'seealso' and makes more sense:
```
delay:
applies_to:
- Task
description: Number of seconds to delay between retries. This setting is only used
in combination with `until`.
```
vs
```
delay:
applies_to:
- Task
description: Number of seconds to delay between retries. This setting is only used
in combination with website for `until`.
```
* updated unit tests
* match see also
* more sanity
* ansible-galaxy configurable timeouts
- also fixed issues with precedence,
so --ignore-certs now overrides config
- made galaxy_timeout generic setting,
if set, it becomes default for server configs,
but now specific servers can override
- updated tests or added notes (some tests ignore/override precedence)
Co-authored-by: Sloane Hertel <19572925+s-hertel@users.noreply.github.com>
* Remove .travis.yml files from galaxy init skeletons
These files have existed for many years but in light of the recent
circumstances around Travis, we should not include them by default in
the galaxy init skeletons.
* Add breaking_changes changelog fragment with recommendation to use a custom skeleton if the .travis.yml file is still needed.
Co-authored-by: s-hertel <19572925+s-hertel@users.noreply.github.com>
* If there is a platform specific handler, prefer the resolved module over the resolved action when loading module_defaults
Add a toggle for action plugins to prefer the resolved module when loading module_defaults
Allow moving away from modules intercepted as actions pattern
Fixes#77059
* Run code-smell sanity tests in UTF-8 Mode.
* Update subprocess use in sanity test programs.
* Use raw_command instead of run_command with always=True set.
* Add more capture=True usage.
* Don't expose stdin to subprocesses.
* Capture more output. Warn on retry.
* Add more captures.
* Capture coverage cli output.
* Capture windows and network host checks.
* Be explicit about interactive usage.
* Use a shell for non-captured, non-interactive subprocesses.
* Add integration test to assert no TTY.
* Add unit test to assert no TTY.
* Require blocking stdin/stdout/stderr.
* Use subprocess.run in ansible-core sanity tests.
* Remove unused arg.
* Be explicit with subprocess.run check=False.
* Add changelog.
* Use a Python subprocess instead of a shell.
* Use InternalError instead of Exception.
* Require capture argument.
* Check for invalid raw_command arguments.
* Removed pointless communicate=True usage.
* Relocate stdout w/o capture check.
* Use threads instead of a subprocess for IO.
* Expand ansible-doc to tests/filters and fix existing issues
enable filter/test docs if in single file or companion yaml
add docs for several filters/tests plugins
allow .yml companion for docs for other plugins, must be colocated
verify plugins are valid (not modules, cannot)
fix 'per collection' filtering
limit old style deprecation (_ prefix) to builtin/legacy
start move to pathlib for saner path handling
moved some funcitons, kept backwards compat shims with deprecation notice
Co-authored-by: Abhijeet Kasurde <akasurde@redhat.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Sandra McCann <samccann@redhat.com>
* Prevent losing unsafe from lookups
This patch fixes a bug which under certain conditions results in data
returned from lookups not being marked as unsafe.
Each time Templar.do_template is invoked a new AnsibleContext is
created and stored effectively at two places:
1) as an instance variable in templar_obj.cur_context
2) as a local variable called new_context in do_template method of Templar
Due to custom functionality in Ansible's Context that allows for nested
templating it is possible that during resolving variable's value
template/do_template method is called recursively again, again creating
a new context. At that point the problem manifests itself because as
mentioned in 1) above the context is overwriten on the templar object
which means that any subsequent calls to _lookup will use the new
context to mark it as unsafe which is now different to the local
new_context which is used for testing for unsafe property.
The solution to the problem appears to be to restore the original
context inside do_template and also to eliminate the local variable
new_context to prevent problems in the future.
It appears that we don't have a better way of storing the context other
than as some form of global variable and so this appears to be the
"best" solution possible at this point. Hopefully data tagging will be
the solution here.
For more examples see unit and integration tests included in this patch.
Fixes#77535
* Run code-smell sanity tests in UTF-8 Mode.
* Update subprocess use in sanity test programs.
* Use raw_command instead of run_command with always=True set.
* Add more capture=True usage.
* Don't expose stdin to subprocesses.
* Capture more output. Warn on retry.
* Add more captures.
* Capture coverage cli output.
* Capture windows and network host checks.
* Be explicit about interactive usage.
* Use a shell for non-captured, non-interactive subprocesses.
* Add integration test to assert no TTY.
* Add unit test to assert no TTY.
* Require blocking stdin/stdout/stderr.
* Use subprocess.run in ansible-core sanity tests.
* Remove unused arg.
* Be explicit with subprocess.run check=False.
* Add changelog.
When looking up the `no_log` setting for a parameter that is an alias in
`AnsibleModule._log_invocation()`, the alias value will always be an
empty dictionary since `self.aliases` on the `AnsibleModule` instance is
never updated after initialization. Since the `no_log` setting is on the
canonical parameter not the alias, an incorrect warning is issued if the
parameter matches `PASSWORD_MATCH`.
This PR returns the aliases dictionary as an attribute of the
`ValidationResult` and updates the `aliases` attribute on the
`AnsibleModule` instance.
* Revert "Revert "Config, ensure templating happens at functions (#77483)""
This reverts commit 94c9106153.
* removed update configdata, which is unused
* removed test for action we don't perform anymore
* removed unused configdata
* replace hardcoded '~/.ansible' to C.ANSIBLE_HOME
* rename previously existing env ANSIBLE_HOME in env-setup script
* modify cache dir monkeypatching in galaxy api unit tests
* update "version_added" to 2.14 for ANSIBLE_HOME
* fix description of collections with proper use of ANSIBLE_HOME
Co-authored-by: htol <github@h-tol.net>
Co-authored-by: stefanwascoding <stefan@syntaxhelden.de>
* Add a toggle to control the number of signatures required to verify the authenticity of a collection
* Make the default number of required valid signatures 1
* Add option to make signature verification strict and fail if there are no valid signatures (e.g. "+1")
* Use a regex to validate --required-valid-signature-count
* Add a toggle to limit the gpg status codes that are considered a failure
* Update documentation and changelog
* Add unit and integration tests for the new options
* Fixes#77146
Fix using user-provided signatures when running 'ansible-galaxy collection verify ns.coll --offline'
Add a test for a user-provided signature when running ansible-galaxy collection verify with --offline
Fix displaying overall gpg failure without extra verbosity
Add a test for displaying gpg failure without verbosity
Improve documentation to be more clear that signature verification only currently applies to collections directly sourced from Galaxy servers
* ansible-galaxy collection install|verify:
- Support verifying the origin of the MANIFEST.json when the Galaxy server has provided signatures.
- Allow supplemental signatures to use during verification on the CLI/requirements file.
* ansible-galaxy collection install:
- Support disabling signature verification. This silences the warning provided by ansible-galaxy if the Galaxy server provided signatures it cannot use because no keyring is configured.
- Store Galaxy server metadata alongside installed collections for provenance. This is used by 'ansible-galaxy collection verify --offline'.
* Add unit tests for method that gets signatures from a Galaxy server
* Add integration tests for user-provided signature sources
- Test CLI option combinations
- Test installing collections with valid/invalid signature sources
- Test disabling GPG verification when installing collections
- Test verifying collections with valid/invalid signature sources
* Make signature verification advisory-by-default if signatures are provided by the Galaxy server
- Make the default keyring None
- Warn if the keyring is None but the Galaxy server provided signatures
- Error if the keyring is None but the user supplied signatures
- Error if the keyring is not None but is invalid
* changelog
* add ansible-galaxy user documentation for new options
Co-authored-by: Matt Martz <matt@sivel.net>
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
Co-authored-by: Martin Krizek <martin.krizek@gmail.com>
Co-authored-by: Sandra McCann <samccann@redhat.com>
Co-authored-by: Andy Mott <amott@redhat.com>
Co-authored-by: John R Barker <john@johnrbarker.com>
* add DebianStrategy tests
* ensure hostname can be changed by using become
* use Systemd strat for debian and Base for generic.
* add test to ensure all strategies are available
Signed-off-by: Thomas Sjögren <konstruktoid@users.noreply.github.com>
- Avoids false positives on become strings being echoed back
by ssh cli itself
- added test for debug lines
- also simplified some of existing test code
modules with python were always normalized to /usr/bin/python,
while other interpreters could have specific versions.
* now shebang is always constructed by get_shebang and args are preserved
* only update shebang if interpreter changed
* updated test expectation
* added python shebang test
* ansible-galaxy - fix the --ignore-certs flag for the implicit galaxy server
* changelog
* Add a test without the server config
* Fix respecting --ignore-certs for individual --server URLs also
* Update changelogs/fragments/76735-ansible-galaxy-fix-ignore-certs.yaml
* check finder type before passing path
ci_complete
* Reduce nesting
* Test find_module does not cause a traceback with Python 3 FileFinder
* Update lib/ansible/utils/collection_loader/_collection_finder.py
* catch the case that cowsay is broken
fixes https://github.com/ansible/ansible/issues/72582
add changelog
raise Exception for broken cowsay
add test for broken cowsay
Co-authored-by: Matthias Bernt <m.bernt@ufz.de>
- On Python 3, decode bytes to str
- Tolerate whitespace around the line.
- Report a missing HOSTNAME line as an error.
- Don't clobber line separators when setting a new hostname.
- Add some tests for this strategy to verify correct operation.
* Use NativeEnvironment for all templating
ci_complete
* Keep Templar.copy_with_new_env for backwards compat
* Mention that AnsibleUndefined.__repr__ changed in the porting guide
* Templar.copy_with_new_env backwards compat
* ci_complete
* download role from api response location
* include changelog fragment
* add unit test for role download url
Co-authored-by: Sam Doran <sdoran@redhat.com>
* ansible-galaxy: Clone git collections using shallow clones
This ensures the collection obtained via git url is a result of a
shallow git clone (git clone --depth=1). The git history of the
collection is not used by ansible, and as such, cloning the entire
history of the repo is unnecessary.
Signed-off-by: Tomas Babej <tomas@tbabej.com>
* ansible-galaxy: Only perform shallow clones on non-versioned git urls
In general, the version can be anything we can checkout (branch, tag,
but also a commit hash). In particular for commit hashes we cannot
perform a shallow clone.
Err on the safe side and only perform shallow clones for non-versioned
git urls (cloning HEAD).
* galaxy-install: Make shallow cloning compatible with older Python versions
Signed-off-by: Tomas Babej <tomas@tbabej.com>
* Pass args as a tuple
Add tests for the git command created from different repo and version combinations
* changelog
Co-authored-by: Tomas Babej <tomas@tbabej.com>
* add tests for fail filter
also tests that fail does not block inspectability
* add fail filter
fallback message is a bit clunky,
since you can't invoke a filter without specifying an input.
That is, "{{ fail }}" doesn't work,
so you have to do "{{ None | fail }}"
* document 'fail' filter
* add changelog fragment
* fail filter uses default message on Undefined or emptystring
makes it slightly easier to use the default message:
```diff
- "{{ None | fail }}"
+ "{{ '' | fail }}"
```
and the user sees a slightly more relevant message
if the message itself is undefined:
```diff
- The error was: {{ failmsg | fail }}: 'failmsg' is undefined
+ The error was: {{ failmsg | fail }}: Mandatory variable has not been overridden
```
* rebuild as the builtin `Undefined`
* harmonise `hint` parameter for make_undefined with jinja
* use code block for documentation item
[ref](https://github.com/ansible/ansible/pull/75435#discussion_r707661035)
* rename to `undef` to expose less Python into the Jinja
[ref](https://github.com/ansible/ansible/pull/75435#pullrequestreview-757799031)
* explicitly instantiate undefined value now that it's possible
see I knew we would break something with reflection
* preserve test coverage of undefined variable
Co-authored-by: Matt Davis <nitzmahone@users.noreply.github.com>
* Enable ansible-galaxy to specify client id override with Keycloak Token
* Specify ability to provide override of client_id
* Test client_id can be configured for individual servers
* Add issue link to changelog
* Document client_id as a config option and add an example
Co-authored-by: s-hertel <19572925+s-hertel@users.noreply.github.com>
* pip - Use pip from the current Python interpreter.
If `executable` and `virtualenv` were not specified, and
the `pip` Python module is available for the current interpreter,
use that `pip` module instead of searching for a `pip` command.
* Add comment about needing `__main__` to run `pip`.
* Fix unit test.
* Add porting guide entry.
* Update changelog to match porting guide description.
ci_complete
* Test a passlib wrapped algo with a password lookup
* Fix error when passlib is used with a wrapped algo
The exception was:
An unhandled exception occurred while running the lookup plugin 'password'.
Error was a <class 'TypeError'>, original message: issubclass() arg 1 must be a class
and can be reproduced using the following command:
ansible localhost -i localhost, -mdebug -amsg="{{ lookup('password', '/dev/null encrypt=ldap_sha512_crypt') }}"
The concerned algo are: bsd_nthash, django_argon2, django_bcrypt, ldap_bcrypt,
ldap_bsdi_crypt, ldap_des_crypt, ldap_hex_md5, ldap_hex_sha1, ldap_md5_crypt,
ldap_pbkdf2_sha1, ldap_pbkdf2_sha256, ldap_pbkdf2_sha512, ldap_sha1_crypt,
ldap_sha256_crypt, ldap_sha512_crypt, roundup_plaintext
Rather than adding further complexity to the regex, preprocess the output to
remove any empty lines. Now the only purpose of the regex is to fix
wrapped lines.
Fixes#70949
* user - Remove unused code.
* Replace deprecated abstractproperty decorator.
* Fix __all__ to be a tuple.
* Use a generator in subelements lookup.
* Use from import in basic.py
* Add changelog fragment.
* Fix selinux unit test.
Push /usr/bin/python to almost the bottom of the barrel. This makes the strategy to prefer
specific versions of the "mystery meat" version.
* Change INTERPRETER_PYTHON default to 'auto'
Change description to match change in behavior.
Change deprecation message to a warning.
* Update docs
* Add porting guide entry
* Update unit tests
* Update integration test
* Allow INTERPRETER_PYTHON_FALLBACK to be configure using a variable
* Prefer platform-python above other Python 2 interpreters
* Add Python 3.10 to the list of interpreters
* Fix when evaluation on Native Jinja and Python 3.10
* Add unit test
* Add explaining comment
* Enable jinja2_native before tests
Co-Authored-By: Matt Martz <matt@sivel.net>
* Sanity
* Return native template module instead of modifying globals
Co-authored-by: Matt Martz <matt@sivel.net>
* modules moved to use best_parsable_locale
* fixed invocations
* better better
* also module_utils
* converted to function as per fb
* patch testt
* whitespace
* Canonicalize module_defaults actions and action_groups pre-fork and cache them on the play
* Call get_action_args_with_defaults with the resolved FQCN plugin and don't pass the redirect list
* Add validation for action_group metadata and a toggle to disable the warnings
* Handle groups recursively referring to each other
* Remove special-casing for non-fqcn actions in module_defaults groups
* Error for actions and groups in module_defaults that can't be resolved
* Error for fully templated module_defaults
* Add integration tests for action_groups
* Changelog
Since the task and connection both have the same 'retries' keyword, the task default
would override the connection value.
Do not pass 'retries' from the task to the connection options.
* Set ssh_connection retries default value back to 0
It was 0 before the move to config and was changed to 3 by accident.
specially for when you have parameters in unicode but need
to scrape responses, C is still the fallback
Co-authored-by: Abhijeet Kasurde <akasurde@redhat.com>
* Change tests to pytest-style tests
* Add tests for invalid hosts
* Validate host inputs
- check for empty values
- check for None
- check for values that are not a sequence and are not strings
- add unit tests
* Move play name setting to get_name() and out of load()
* Add _validate_hosts() method
By defining this method, it gets called automatically by FieldAttributeBase.validate().
Since moving to distro, it is possible to return this information for all platforms, not just Linux.
Also return version information for all platfrom not just Linux.
Update unit tests.
Remove some duplicate unit tests though I think there are more to remove.
* Fix docstring formatting
* Minor docstring changes
* Mock distro.id for Solaris service test
* Update comment
Test for the required binaries in the can_handle_archive() method and fail there. This
prevents failures for missing binaries unrelated to the archive type.
* Update missing zip binary message to match tar message
* Update unit tests
* Add integration tests
* Define packages based on the system rather than ignoring failures
* minor service_mgr facts fixes
handle case in which ps command fails or returns empty
updated tests since it now does keep trying to detect after ps fails
* rebased with upstream
* removed extra usetty as it wasnt needed, style changes, added var option setable by inventory for pkcs11
* update pkcs11_provider version_added
* Update lib/ansible/plugins/connection/ssh.py
Co-authored-by: Jordan Borean <jborean93@gmail.com>
* Update lib/ansible/plugins/connection/ssh.py
Correct logic for a password being required for pkcs11_provider
Co-authored-by: Jordan Borean <jborean93@gmail.com>
* style nit fixes for checking pkcs11_provider is set
* fixed duplication when using password_prompt with pkcs11_provider
* added changelog fragment
* added changelog fragment
Co-authored-by: David Whiteside <david.whiteside@nrel.gov>
Co-authored-by: Matt Davis <nitzmahone@users.noreply.github.com>
Co-authored-by: Jordan Borean <jborean93@gmail.com>
* Fix module-specific defaults in the gather_facts, package, and service action plugins.
* Handle ansible.legacy actions better in get_action_args_with_defaults
* Add tests for each action plugin
* Changelog
Fixes#72918
Change:
- Hostname strategies' get_*() methods should never write to the
filesystem. They are used in check_mode by default to determine if
there is any work to be done.
Test Plan:
- New unit tests to ensure that (at least when in check_mode) the get
methods don't ever call write.
Tickets:
- Fixes#66432
Signed-off-by: Rick Elrod <rick@elrod.me>
* Don't mutate os.environ in AnsibleModule.run_command, make a copy, and pass to Popen. Fixes#74783
* Simplify code a bit
* More simple
* Address some other potentially non threadsafe operations
* Add if around umask
* Address unit test assumptions
* Add clog frag
* yaml syntax issue
* Remove PyCrypto from setup.py and packaging script
* Remove mention of pycrpto from installation docs
* Remove PyCrypto from vault
* Remove pycryto constraint and unit test requirement
* Remove PyCrypto tests from unit tests
* Add docs and fix warning message
* Remove section about cryptography library in Ansible Vault docs
* Get available collection versions with page_size=100 for v2 and limit=100 for v3
* Update unit tests for larger page sizes
* Add a generic retry decorator in module_utils/api.py that accepts an Iterable of delays and a callable to determine if an exception inheriting from Exception should be retried
* Use the new decorator to handle Galaxy API rate limiting
* Add unit tests for new retry decorator
* Preserve the decorated function's metadata with functools.wraps
Co-authored-by: Matt Martz <matt@sivel.net>
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* pause - ensure control characters are always set appropriately
On some systems, curses.tigetstr() returns None, which does not work as a control character.
* Add unit tests
* Sort imports
* Skip on older Python
This is an action plugin and only runs on the controller, so no need to test of Python 2. Making
the import hackery work on Python 2 would required some more work which I am not sure is
worth it since we are moving away from Python 2 support on the controller.
* Make the tests work on Python 2 and 3
* Fix BaseFileCacheModule#keys to respect prefix
Change:
- Previously BaseFileCacheModule#keys would return keys with the cache
prefix. These keys are impossible to retrieve from the cache without
removing the prefix or using the cache without a prefix.
Now it removes the prefix from the key and only returns keys that
share the same prefix as the cache.
Test Plan:
- New unit tests
* Add explicit BaseFileCacheModule#keys test
Test that files that do not match the cache prefix are ignored.
Test that the prefix is removed from the cache key.
* dont rely on vars, task already gives us info
* ensure we always display delegation in host label
* also added parens with ansible_host to show target host vs resolved host
* delegating to self is not delegating
* delegated vars restoration for backwards compat
* tests need mock task with delegate_to
* correctly parse device from string
* check for command presence before running them
* check for command presence and return code for solaris and aix as well
* add changelog
Change:
- Instead of returning the `str` type, return the value that was
calculated.
Test Plan:
- New unit tests.
Signed-off-by: Rick Elrod <rick@elrod.me>
Homebrew's default install location for macOS on ARM is /opt/homebrew.
Source: https://docs.brew.sh/FAQ
On a Mac M1 (Apple Silicon), homebrew will be installed at
/opt/homebrew/bin/brew.
Change:
- Newer Solaris drops setfacl. Add a fallback for its chmod ACL syntax.
Test Plan:
- New units
Tickets:
- Fixes#74282
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Regression introduced in #70785
- When macOS chmod ACL syntax is used, Solaris-derived chmods return
with a status of 5. This is also used for our sshpass handling,
because sshpass will return 5 on auth failure. This means on Solaris,
we incorrectly assume auth failure when we reach this branch of logic
and try to run chmod with macOS syntax.
- We now wrap this specific use of chmod in an exception handler that
looks for AnsibleAuthenticationFailure and skips over it. This adds
another authentication attempt (something we normally avoid to prevent
account lockout), but seems better than the regression of not allowing
other fallbacks to be used.
- Without this patch, if setfacl fails on Solaris (and sshpass is used),
we do not try common_remote_group or world-readable tmpdir fallbacks.
Test Plan:
- New unit
Signed-off-by: Rick Elrod <rick@elrod.me>
This simplifies rendering the hostname (or hostname+delegated host) in
the default callback module, and reduces code duplication
I've chosen not move where in each handler the host label is rendered,
in case subsequent operations has side effects. However I'm happy to
change that if considered safe.
I've chosen not to change the formatting operator used (%), to avoid
changes in rendering that might result.
Signed-off-by: Alex Willmer <alex@moreati.org.uk>
* all lookups to support config system
- added get_options to get full dict with all opts
- fixed tests to match new error messages
- kept inline string k=v parsing methods for backwards compat
- placeholder depredation for inline string k=v parsing
- updated tests and examples to also show new way
- refactored and added comments to most custom k=v parsing
- added missing docs for template_vars to template
- normalized error messages and exception types
- fixed constants default
- better details value errors
Co-authored-by: Felix Fontein <felix@fontein.de>
* Support omitting the trailing separator when a dictionary key's value is an empty string
* Support a default value when the value used in the group name is an empty string
* Add tests
* change log
Change:
- Mostly increase error coverage for various conditions in play.py
- Also fix a string in an error, where get_name() was called before
self.name was read in, so get_name() was always ''.
Test Plan:
- new tests
Signed-off-by: Rick Elrod <rick@elrod.me>
* Fix regex for py2 and py3
Signed-off-by: Rick Elrod <rick@elrod.me>
* py2 hates me
Signed-off-by: Rick Elrod <rick@elrod.me>
* --offline allows in-place verify for installed collections with manifests
* manifest hash, collection name, version, and path are now always displayed
* test updates
* Begin using ArgumentSpecValidator in AnsibleModule
* Add check parameters to ArgumentSpecValidator
Add additional parameters for specifying required and mutually exclusive parameters.
Add code to the .validate() method that runs these additional checks.
* Make errors related to unsupported parameters match existing behavior
Update the punctuation in the message slightly to make it more readable.
Add a property to ArgumentSpecValidator to hold valid parameter names.
* Set default values after performining checks
* FIx sanity test failure
* Use correct parameters when checking sub options
* Use a dict when iterating over check functions
Referencing by key names makes things a bit more readable IMO.
* Fix bug in comparison for sub options evaluation
* Add options_context to check functions
This allows the parent parameter to be added the the error message if a validation
error occurs in a sub option.
* Fix bug in apply_defaults behavior of sub spec validation
* Accept options_conext in get_unsupported_parameters()
If options_context is supplied, a tuple of parent key names of unsupported parameter will be
created. This allows the full "path" to the unsupported parameter to be reported.
* Build path to the unsupported parameter for error messages.
* Remove unused import
* Update recursive finder test
* Skip if running in check mode
This was done in the _check_arguments() method. That was moved to a function that has no
way of calling fail_json(), so it must be done outside of validation.
This is a silght change in behavior, but I believe the correct one.
Previously, only unsupported parameters would cause a failure. All other checks would not be executed
if the modlue did not support check mode. This would hide validation failures in check mode.
* The great purge
Remove all methods related to argument spec validation from AnsibleModule
* Keep _name and kind in the caller and out of the validator
This seems a bit awkward since this means the caller could end up with {name} and {kind} in
the error message if they don't run the messages through the .format() method
with name and kind parameters.
* Double moustaches work
I wasn't sure if they get stripped or not. Looks like they do. Neat trick.
* Add changelog
* Update unsupported parameter test
The error message changed to include name and kind.
* Remove unused import
* Add better documentation for ArgumentSpecValidator class
* Fix example
* Few more docs fixes
* Mark required and mutually exclusive attributes as private
* Mark validate functions as private
* Reorganize functions in validation.py
* Remove unused imports in basic.py related to argument spec validation
* Create errors is module_utils
We have errors in lib/ansible/errors/ but those cannot be used by modules.
* Update recursive finder test
* Move errors to file rather than __init__.py
* Change ArgumentSpecValidator.validate() interface
Raise AnsibleValidationErrorMultiple on validation error which contains all AnsibleValidationError
exceptions for validation failures.
Return the validated parameters if validation is successful rather than True/False.
Update docs and tests.
* Get attribute in loop so that the attribute name can also be used as a parameter
* Shorten line
* Update calling code in AnsibleModule for new validator interface
* Update calling code in validate_argument_spec based in new validation interface
* Base custom exception class off of Exception
* Call the __init__ method of the base Exception class to populate args
* Ensure no_log values are always updated
* Make custom exceptions more hierarchical
This redefines AnsibleError from lib/ansible/errors with a different signature since that cannot
be used by modules. This may be a bad idea. Maybe lib/ansible/errors should be moved to
module_utils, or AnsibleError defined in this commit should use the same signature as the original.
* Just go back to basing off Exception
* Return ValidationResult object on successful validation
Create a ValidationResult class.
Return a ValidationResult from ArgumentSpecValidator.validate() when validation is successful.
Update class and method docs.
Update unit tests based on interface change.
* Make it easier to get error objects from AnsibleValidationResultMultiple
This makes the interface cleaner when getting individual error objects contained in a single
AnsibleValidationResultMultiple instance.
* Define custom exception for each type of validation failure
These errors indicate where a validation error occured. Currently they are empty but could
contain specific data for each exception type in the future.
* Update tests based on (yet another) interface change
* Mark several more functions as private
These are all doing rather "internal" things. The ArgumentSpecValidator class is the preferred
public interface.
* Move warnings and deprecations to result object
Rather than calling deprecate() and warn() directly, store them on the result object so the
caller can decide what to do with them.
* Use subclass for module arg spec validation
The subclass uses global warning and deprecations feature
* Fix up docs
* Remove legal_inputs munging from _handle_aliases()
This is done in AnsibleModule by the _set_internal_properties() method. It only makes sense
to do that for an AnsibleModule instance (it should update the parameters before performing
validation) and shouldn't be done by the validator.
Create a private function just for getting legal inputs since that is done in a couple of places.
It may make sense store that on the ValidationResult object.
* Increase test coverage
* Remove unnecessary conditional
ci_complete
* Mark warnings and deprecations as private in the ValidationResult
They can be made public once we come up with a way to make them more generally useful,
probably by creating cusom objects to store the data in more structure way.
* Mark valid_parameter_names as private and populate it during initialization
* Use a global for storing the list of additonal checks to perform
This list is used by the main validate method as well as the sub spec validation.
Ansible can gather distribution facts for older Amazon Linux
with /etc/os-release data.
Fixes: #73946
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* finish migrating ssh plugin to config system
fixes#72739fixes#57220
* fix connection detection in reset
* correct options for connection meta reset
Co-authored-by: David Shrewsbury <Shrews@users.noreply.github.com>
* Add more scenarios to basic valid testing
* Update invalid tests
* Fix test for Python 2
* Condense data
* Add tests for missing required and invalid-elements
* Update aliases tests
* Add invalid scenarios for aliases
* Add tests for _add_error() method
* Fix sanity test failure
* Manage the in-memory cache in _call_galaxy but let the caller set the file cache after getting paginated results
* Add a test for caching successful and not caching unsuccessful paginated results
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
Only add data when there is data to add
also avoid clobbering existing data with empty file
fixes#45843
* remove redundant code, update comments
* fix mock dataloader, original does not return None
* added test
* module compat for py3.8+ controller
* replaced internal usages of selinux bindings with internal ctypes binding (allows basic selinux operations from any Python interpreter), plus tests
* added new respawn_module API to allow modules to import Python packages that are only available under a well-known interpreter, plus tests
* added respawn logic to modules that need Python libs from a specific system interpreter (apt, apt_repository, dnf, yum)
minimize internal HAVE_SELINUX usage
spurious junk
pep8
* pylint fixes
* add RHEL8 Python 3.8 testing
* more pylint
* import sanity
* unit tests
* changelog update
* fix a bunch of stuff
* tweak changelog
* fix setup_rpm_repo on EL8
* misc sanity/test fixes
* misc feedback tweaks
* fix import fallback in test module
* fix selinux MU test
* fix dnf tests to avoid python-dependent test packages
* add trailing LFs to aliases
* fix yum tests to avoid test package with Python deps
* hack create_repo for EL6 to create noarch package
Donatas Abraitis