* ansible-galaxy - add config to control the display wheel
* Fix changelog and make test more stable
* Don't use display thread at all if progress wheel isn't being shown
The default behavior of the ansible-test vcenter plugin is to use the govcsim container to run tests.
However, unless the govcsim mode was specified using the VMWARE_TEST_PLATFORM environment variable, the filter code would skip the tests unless the tests ran on Shippable or the user had an ansible-core-ci key.
Now the filter correctly recognizes that govcsim is the default.
* Fix location of unit test requirements.
* Preserve ansible-test unit test requirements.
* Remove redundant unit test requirements.
* Fix location of network test requirements.
* Preserve ansible-test network test requirements.
* Remove redundant network test requirements.
* Add missing ordereddict requirements.
* Load collection requirements correctly.
* Add changelog fragment.
* Adding support for Plugin runnable type
Adding support for device arrays in vdirect_runnable module.
Adding "output" dictionary to the vdirect_runnable module result dictionary.
* Adding support for Plugin runnable type
Adding support for device arrays in vdirect_runnable module.
Adding "output" dictionary to the vdirect_runnable module result dictionary.
* Avoid assertion rewriting in pytest plugins.
Adding PYTEST_DONT_REWRITE to the ansible-test pytest plugin docstrings disables assertion rewriting in pytest for those plugins.
This avoids warnings during test execution if the plugins are loaded multiple times (such as being imported within tests).
* Run ansible-test pytest plugins early.
The ansible-test pytest plugins need to load and run earlier than conftest modules.
To facilitate this, the pytest_configure function is run during loading, which works since they are loaded (but not always run) before conftest modules are loaded.
A check has also been added to the pytest_configure functions to prevent them from running multiple times in the same process.
* Load pytest plugins using an env var.
The -p command line option loads plugins before conftest, but only during collection.
The PYTEST_PLUGINS environment variable loads plugins before confest, both during collection and test execution.
Creating a virtual environment using `venv` when running in a virtual environment created by `virtualenv` results in a copy of the original virtual environment instead of creation of a new one.
To work around this, `ansible-test` now identifies when it is running in a `virtualenv` created virtual environment and uses the real Python interpreter to create the `venv` virtual environment.
* AWS ec2_vpc_net: Enable ipv6 CIDR assignment
Enable IPv6 CIDRs in ec2_vpc_net, and fix ec2_vpc_subnet tests that
were depending on the aws cli for CIDR assignment.
Related to: #27800
The `test/results/` directory for Ansible test output was already ignored when not using git.
When Ansible Collections were switched to `tests/output/` the ignore entry was previously overlooked.
* bump hcloud version to 1.4.1
`hcloud`<=1.4.0 has requirement `requests==2.20.0`. This prevents the
installation of the Vcenter Automation SDK which depends on `requests>=2.22.0`.
`hcloud` 1.4.1 does not have the problem: 8bff356efb
Bumping the dependency will resolve the issue.
* Fix ansible-doc traceback for removed modules.
This avoids tracebacks with errors like the following when a module has been removed:
module module_name missing documentation (or could not parse documentation): 'NoneType' object does not support item assignment
* Fix ansible-doc sanity test warning handling.
Warnings about removed modules/plugins on stderr are now properly ignored.
Previously an ansible-doc error could result in unrelated errors going undetected because tests were stopped early and the underlying error was ignored.
* Fix ansible-test venv activation.
When using the ansible-test --venv option, an execv wrapper for each python interpreter is now used instead of a symbolic link.
* Fix ansible-test execv wrapper generation.
Use the currently running Python interpreter for the shebang in the execv wrapper instead of the selected interpreter.
This allows the wrapper to work when the selected interpreter is a script instead of a binary.
* Fix ansible-test sanity requirements install.
When running sanity tests on multiple Python versions, install requirements for all versions used instead of only the default version.
* Fix ansible-test --venv when installed.
When running ansible-test from an install, the --venv delegation option needs to make sure the ansible-test code is available in the created virtual environment.
Exposing system site packages does not work because the virtual environment may be for a different Python version than the one on which ansible-test is installed.
* create-deprecated-issues script can now add to a specified project
* Migrate the create deprecated issues script into a subcommand of build-ansible
* Remove deprecated-issue script from ignore list
* aws_secret: (integration tests) Move tests to using module_defaults
* Update hacking aws security policy to enable management of secrets
* aws_secret: (integration tests) Fixup integration tests
- Update tests to use resource_prefix as a prefix rather than a suffix
- Pause after role creation to cope with AWS being slow (and returning before the role it ready)
* Allow the use of _paramiko_conn even if the connection hasn't been started.
I'm not sure what the benefit is of Noneing paramiko_conn on close, but will keep for now
* Fix test
* Try to fix up net_put & net_get
* Add changelog
* Fix ec2_vpc_vgw broken tests
Add waiter function to wait for API to report detached vgw is available.
Also catch extra error code in attach retry as EC2 sometimes reports that
the vgw is available several seconds before permitting the attachment.
Fixes: #53185
* Re-enable ec2_vgc_vgw test target
* add new module: aws_stepfunctions_state_machine
* add integration tests for new module: aws_stepfunctions_state_machine
* fix sanity checks
* use files/ folder instead for integration test
* rename role name in integration test
* attempt further permissions
* iam states prefix
* iam integration test prefix
* add iam policy for running step functions state machine actions
* slightly increase iam permission scope
* rename integration test folder to proper name
* move main() method to end of file
* move contents of integration-policy.json for state machines to compute-policy.json
* make check_mode return proper changed value + add check_mode integration tests
* rename module to aws_step_functions_state_machine
* fix missed rename in integration test variable
* add purge_tags option
* bump to version 2.10
Python < 2.7.9 does not have the ssl.SSLContext attribute.
ssl.SSLContext is only required when we want to validate the SSL
connection. If `validate_certs` is false, we don't initialize the
`ssl_context` variable.
Add unit-test coverage and a little refactoring:
- avoid the use of `mocker`, when we can push `monkeypatch` which is
`pytest`'s default.
- use `mock.Mocker()` when possible
closes: #57072
* module_utils/ec2: (unit tests) Move unit tests for module_utils/ec2.py into test/units/module_utils
- compare_policies was refactored from s3_bucket
- "ec2_utils" doesn't seem to have ever existed
* module_utils/ec2: (unit tests) Add unit test for comparing quoted and unquoted bools and numbers within policies
As per https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_policies_grammar.html
"Values are enclosed in quotation marks. Quotation marks are optional for numeric
and Boolean values."
* module_utils/ec2: Explicitly convert bools and ints to strings when comparing policies
See also: https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_policies_grammar.html
* Fixes to ecs_certificate cert chain for #61738
* Added changelog fragment
* Fixes to ecs_certificate for cleaner join, and better integration test
* Fix integration test formatting
* End cert chain with a \n
* Update changelogs/fragments/61738-ecs-certificate-invalid-chain.yaml
Co-Authored-By: Felix Fontein <felix@fontein.de>
* Update main.yml
* Update AWS hacking policy to enable ASG Tagging management
* aws_asg: Add tests for ASG Tagging (including idempotency)
* aws_asg: ignore sort order when comparing tags on the ASG (fix idempotency)
* ec2_asg: (integration tests) test for idempotency when managing metrics collection
* ec2_asg: sort list of enabled metrics to ensure clean comparisons.
Add a list of previously used release names to make it easy to tell what
release names are no longer usable.
Add a test that new release names have been added to the used list.
Fixes#61616
* iam_group: (integration tests) migrate tests to module_defaults
* iam_group: (integration tests) migrate to using temporary user and group with {{ resource_prefix }}
* iam_group: (integration tests) fix test, checking the return values
* iam_group: (integration tests) Add some more tests around the behaviour of 'changed'
* iam_group: (docs) Update documentation of iam_group return value
* Update AWS testing policies to enable group/user management
* aws_vpc_subnet: (integration tests) migrate to module_defaults
* aws_vpc_subnet: (integration tests) remove hard coded assumption that AZ A exists.
While Amazon now tends to enable all AZs in a region, new customers in us-west-1 are only assigned 2 out of the 3 AZs, which might not include AZ a
* ec2_vpc_subnet: (integration tests) General cleanup
- use "is changed" rather than .changed
- clean up labelling of a couple of assertions (C&P fail)
* ec2_launch_template: (integration tests) make sure security_token is optional
* ec2_launch_template: (integration tests) add dependencies at the top level so they're pulled into the docker containers
* Update Hacking Compute Policies for Launch Templates
* Fix bad assumption about shippable resource_prefix for codebuild and codepipeline tests
* Update test/integration/targets/aws_codepipeline/defaults/main.yml
On OpenBSD, 13 asterisk characters as a password hash, marks the
account as disabled. Otherwise daily(8) script which executes
security(8) will email operator about not properly locked accounts.
Before the diff, we see following warning:
> [WARNING]: The input password appears not to have been hashed. The 'password' argument must be encrypted for this module to work properly.
After the diff, warning is gone.
- Add retries instead of a pause task
- Shorten the IAM role name length
- Put the IAM role name in defaults/main.yml instead
- Fix the aws_codepipeline tests too
* Migrate ec2_eip module to boto3
This patch is a step towards the integration of several PRs that have
attempted to migrate this code
closes#55190closes#45478
Follow-up PRs will address the outstanding changes made in #55190
* luks_device.py: Allow manipulate LUKS containers with label or UUID
- Allow create a LUKS2 container format with label support
- Allow manipulate (open, close, modify) an LUKS container based on
both label (LUKS2 format) or UUID instead of using devices only.
Fixes: #58973
Signed-off-by: Alexandre Mulatinho <alex@mulatinho.net>
* test_luks_device.py: organizing tests to support labels
- Add label on some tests and fix errors reported by Shippable
Signed-off-by: Alexandre Mulatinho <alex@mulatinho.net>
* luks_device.py: adjusting versions and messages
- Modifying version_added from 2.9 to 2.10
- Fixing some messages
- Created a changelog fragment
- Moving blkid from scope
Fixes#58973
Signed-off-by: Alexandre Mulatinho <alex@mulatinho.net>
* ansible-test - Contiune if the git command returns an error
* Just return stdout
* Use to_text() when displaying exception
* Add a message property to SubprocessError
* Update DevOps AWS policy
- Fix typos in permission names
- While AWS claims you can use 'arn:aws:codecommit:*' it errors unless you use '*'
* aws_codecommit: (integration tests) Migrate to module_defaults
* aws_codecommit: (integration tests) Fix integration tests
* aws_codecommit: (integration tests) Add tests for updating the description
* aws_codecommit: Add support for updating the description and rename "comment" option to "description"
The `git submodule status` command is relative to the current git repository by default.
When running from a repository subdirectory paths can be returned above the current directory.
Specifying the current directory with `git submodule status` avoids listing submodules above that directory.
This will fix issues when testing a collection that is rooted below the repository root when that repository uses submodules.
* Refactor galaxy collection API for v3 support
* Added unit tests for GalaxyAPI and starting to fix other failures
* finalise tests
* more unit test fixes
* Initial nxos_file_copy action plugin work
* Remove code from nxos_file_copy module
* Add file_push and file_pull support
* Additional refactoring and shipable updates
* Simplify outcomes and update doc header
* Add more error data information for easier debugging
* Reorder outcomes and add additional tests
* Capture more data for permission denied outcome
* Properly load module_prefix for collections
Now that we are using collections for tasks, we need to properly split
the name and load the prefix properly.
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
* Add unit tests for task_executor
This commit adds missing unit tests for action handler in test_task_executor.
Signed-off-by: Daniel Mellado <dmellado@redhat.com>
Add support for create or re-configure VM with multiple CD-ROMs attaching to IDE controller now, will implement SATA controller support later.
parameters can be set as below:
cdrom:
- controller_type: ide
controller_number: 0
unit_number: 0
type: client
* Update collections integration targets path.
* Fix integration path handling.
* Add collections test target fallback.
Also add warnings and errors for common path mistakes.
* Improve role target detection.
This directory is currently a fixed location to make troubleshooting easier.
It is cleared before each test target runs, but is preserved when a test target finishes.
This allows the contents to be inspected when a test fails.
The previous location was `~/ansible_testing/`.
The new location is within the content root:
- `test/results/.tmp/output_dir` for Ansible
- `tests/output/.tmp/output_dir` for Ansible Collections
Moving the directory reduces the number of places on the filesystem where tests create output.
It also enables the results to be returned from delegated systems.
* default collection support
* playbooks run from inside a registered collection will set that collection as the first item in the search order (as will all non-collection roles)
* this allows easy migration of runme.sh style playbook/role integration tests to collections without the playbooks/roles needing to know the name of their enclosing collection
* disable default collection test under Windows
* enable collection search for role dependencies
* unqualified role deps in collection-hosted roles will first search the containing collection
* if the calling role has specified a collections search list in metadata, it will be appended to the search order for unqualified role deps
* disable cycle detection unit test
* failing on 3.7+, needs proper cycle detection
* see #61527
* rename modules
* created links
* fixed sanity
* removed unnecessary ignore rules
* added depreciation warning
* update ignore.txt to match
* removed unnecessary ignore rules
* update ignore.txt to match
* make ignore.txt same as in devel
* cr
* additional sanity
* Clean up layout paths for integration tests.
* Remove "special" integration test target type.
* Remove unnecessary role detection logic.
* Remove support for non-sh runme scripts.
* Simplify reading of aliases.
The directories used for collections tests are changing as follows:
`test/` -> `tests/`
`test/results/` -> `tests/output/`
This is a breaking change for collections tests executed by ansible-test.
All collections will need to be updated to use the new directory.
The `tests/output/` directory should be added to the `.gitignore` or equivalent in each collection.
This change is being made before the first pre-release of Ansible 2.9 since ansible-test has not yet been shipped.
Using the `tests/` directory matches the other collections directories `plugins/` and `roles/`.
This resolves https://github.com/ansible/ansible/issues/60218
* play, block, task: New attribute forks
With this it is possible to limit the number of concurrent task runs.
forks can now be used in play, block and task. If forks is set in different
levels in the chain, then the smallest value will be used for the task.
The attribute has been added to the Base class as a list to easily provide
all the values that have been set in the different levels of the chain.
A warning has been added because of the conflict with run_once. forks will
be ignored in this case.
The forks limitation in StrategyBase._queue_task is not used for the free
strategy.
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
* Handle forks in free strategy
The forks attribute for the free strategy is handled in run in the free
StrategyModule. This is dony by counting the amount of tasks where the uuid
is the same as the current task, that should be queued next. If this amount
is bigger or equal to the forks attribute from the chain (task, block,
play), then it will be skipped to the next host. Like it is also done with
blocked_hosts.
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
* Test cases for forks with linear and free strategy
With ansible_python_interpreter defined in inventory file using
ansible_playbook_python.
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
* Changing forks keyword to throttle and adding some more docs
* default collection support
* playbooks run from inside a registered collection will set that collection as the first item in the search order (as will all non-collection roles)
* this allows easy migration of runme.sh style playbook/role integration tests to collections without the playbooks/roles needing to know the name of their enclosing collection
* ignore bogus sanity error
* filed #61460
* fixed task unit test failure
* don't append an empty collections list to the ds
* ignore leftover local_action in mod_args ds action parsing
* fix async_extra_data test to not require ssh and bogus locale
* disable default collection test under Windows
* ensure collection location FS code is always bytes
* add changelog
* Fix TypeError in ec2_group.py for Python3 when sorting dictionary list
* Using json.loads() and dumps() to replace sorting
* Bug fixes for ec2_group.py
* Dictionaries cannot be compared/sorted in Python3
* Diff will occur when the IpPermissions have the same IpRanges but have different ordering
* 'before' will be sorted by 'Type' with high priority than 'IP', but 'boto3.describe_security_groups()' function cannot get 'Type' from Amazon
* Add some basic diff mode testing to exercise the rule-sorting code
* Addition of ecs_certificate module.
* Documentation and code fixes
* Updates per code review
* Doc fixes, rename of chain_path to full_chain_path, add regex for cert_Expiry check
* Fixes to pep8 check to make regexp string 'raw'.
* Mistakes with find/replace of caseing.
* Added integration tests and some doc cleanup
* Some additional assertions and test typo cleanup
* Update lib/ansible/modules/crypto/entrust/ecs_certificate.py
Co-Authored-By: Felix Fontein <felix@fontein.de>
* Responses to code review comments
* Remove fake passwords from aliases file.
* Add na_santricity_firmware module.
Manages NetApp E-Series firmware upgrades.
Includes unit and integration tests.
* Add legacy support to na_santricity_firmware module.
* Rename na_santricity_firmware to netapp_e_firmware
* Improved netapp_e_firmware example documentation.
* Add na_santricity_drive_firmware module
Manage NetApp E-Series drive firmware downloads
Includes unit and integration tests
* Rename na_santricity_drive_firmware to netapp_e_drive_firmware
* Add galaxy collections API v3 support
Issue: ansible/galaxy-dev#60
- Determine if server supports v3
Use 'available_versions' from `GET /api`
to determine if 'v3' api is available on
the server.
- Support v3 pagination style
ie, 'limit/offset style', with the paginated
responses based on https://jsonapi.org/format/#fetching-pagination
v2 galaxy uses pagination that is more or less
'django rest framework style' or 'page/page_size style',
based on the default drf pagination described
at https://www.django-rest-framework.org/api-guide/pagination/#pagenumberpagination
- Support galaxy v3 style error response
The error objects returned by the galaxy v3 api are based
on the JSONAPI response/errors format
(https://jsonapi.org/format/#errors).
This handles that style response. At least for publish_collection
for now. Needs extracting/generalizing.
Handle HTTPError in CollectionRequirement.from_name()
with _handle_http_error(). It will raise AnsibleError
based on the json in an error response.
- Update unit tests
update test/unit/galaxy/test_collection*
to paramaterize calls to test against
mocked v2 and v3 servers apis.
Update artifacts_versions_json() to tale an
api version paramater.
Add error_json() for generating v3/v3 style error
responses.
So now, the urls generated and the pagination schema
of the response will use the v3 version if
the passed in GalaxyAPI 'galaxy_api' instance
has 'v3' in it's available_api_versions
* Move checking of server avail versions to collections.py
collections.py needs to know the server api versions
supported before it makes collection related calls,
so the 'lazy' server version check in api.GalaxyAPI
is never called and isn't set, so 'v3' servers weren't
found.
Update unit tests to mock the return value of the
request instead of GalaxyAPI itself.
* Model->Role->Module.
Yet to import modules/exos_facts.py
* exos_facts refactor
* future-import and metaclass
* Fix unit tests
* Fix openconfig-lldp word and send_request API from Httpapi class
idempotent, json.dumps in base class, send_requests from base exos class
* action file for exos_lldp_global
* Add intergration tests for exos_lldp_global
* Test data field of the request
* network module
* delete cp_network, cp_network_facts, and change test_cp_network to match the new network module
* Update ignore.txt
* adding state: present
* update example
* list to dict
* Update test_cp_mgmt_network.py
* remove white-space
* Add --venv delegation to ansible-test.
* Update import sanity test venv creation.
* Fix import test when using --venv on Python 2.x.
* Improve virtualenv setup overhead.
* Hide pip noise for import sanity test.
* Raise verbosity on venv info messages.
* Get rid of base branch noise for collections.
* Add missing --requirements check.
* Files from PR#60621, continue working on fortios_facts modules
* PR#61405 unit test module test_fortios_facts.py
* sanity fixed in test_fortios_facts unit test module
* support wjh module config with testing file
* Fix version, fix enable/disable all groups
* refactor get current group status
* fix indentation and change command_generate function, add test cases and check them
* Update onyx_wjh.py
fix description
* Update onyx_wjh.py
remove extra spaces, add type to choices after run validate-modules
* fix format string - pytest use 2.6.6 format function
* Remove unused imports
* chenge onyx_wjh file permessions
* Fix version, fix enable/disable all groups
* fix indentation and change command_generate function, add test cases and check them
* support wjh module config with testing file
* Fix version, fix enable/disable all groups
* refactor get current group status
* fix indentation and change command_generate function, add test cases and check them
* Update onyx_wjh.py
fix description
* Update onyx_wjh.py
remove extra spaces, add type to choices after run validate-modules
* fix format string - pytest use 2.6.6 format function
* fix format string - pytest use 2.6.6 format function
* chenge onyx_wjh file permessions
* new module
* icx_cliconf
* icx test units module
* icx units module
* added notes
* new changes
* new module
* new fix
* new changes
* new fixes
* new changes
* Rebase
* Remove .keep files from test/results/ dirs.
* Remove classification of test/results/ dir.
* Add results_relative to data context.
* Use variables in delegation paths.
* Standardize file writing and results paths.
* Fix issues reported by PyCharm.
* Clean up invocation of coverage command.
It now runs through the injector.
* Hack to allow intercept_command in cover.py.
* Simplify git ignore for test results.
* Use test result tmp dir instead of cache dir.
* Remove old .pytest_cache reference.
* Fix unit test docker delegation.
* Show HTML report link.
* Clean up more results references.
* Move import sanity test output to .tmp dir.
* Exclude test results dir from coverage.
* Fix import sanity test lib paths.
* Fix hard-coded import test paths.
* Fix most hard-coded integration test paths.
* Fix PyCharm warnings.
* Fix import placement.
* Fix integration test dir path.
* Fix Shippable scripts.
* Fix Shippable matrix check.
* Overhaul key pair management.
* new module
* new module
* new module
* new terminal
* new terminal
* new terminal
* new terminal
* new terminal
* new terminal
* new cliconf
* new cliconf
* cliconf
* cliconf
* icx cliconf
* icx cliconf
* icx_cliconf
* icx_cliconf
* icx test units module
* icx test units module
* icx units module
* icx units module
* icx banner unit test
* icx banner unit test
* icx banner unit test
* PR changes resolved
* PR changes resolved
* changes resolved
* changes resolved
* Changes Resolved
* Changes Resolved
* check_running_config changes resolved
* check_running_config changes resolved
* check_running_config changes resolved
* added notes
* added notes
* new changes
* PR comments resolved
* new module icx_interface
* new module icx_interface
* new changes
* new changes
* new changes
* new changes
* new changes
* new changes
* new changes
* new changes
* new changes
* new changes
* new changes
* new changes
* new changes
* new changes
* new changes
* new fix
* new fix
* new fix
* new fix
* new fix
* new fix
* new fix
* new fix
* new fix
* new fix
* new fix
* new changes
* new changes
* new changes
* new changes
* new changes
* new changes
* notes updated
* Update icx.py
* Whitespace error
* new module
* icx_cliconf
* icx test units module
* icx test units module
* icx units module
* icx units module
* icx banner unit test
* added notes
* new changes
* New branch to prevent complex rebase
* Rebase had problems
* win_updates: Add flag to only download updates without installing them
* Fix test
* Fixes ansible-test (pep8)
* Fix integration test
* Fix actual fix.
* Change collection PS util import pattern
* Add changes for py2 compat
* fix up regex and doc errors
* fix up import analysis
* Sanity fix for 2.6 CI workers
* Get collection util path for coverage collection
* add locks
* rename the module
* add test
* add test
* address comments
* add quote
* can list child scope lock
* minor docs tweaks
* Add files via upload (#62)
* change '\r\n' to '\n' (#63)
* Small changes, just to trigger CI verify.
* trigger CI verify
* remove 's'
* Update according by comments
* change small for trigger CI check
* Rename OneView _facts modules -> _info
* Adjust PR #.
* Forgot to update test names.
* Remove superfluous blank line.
* Some more things from review.
* Added coverage collection for PowerShell - ci_complete ci_coverage
* uncomment out coverage uploader call
* Generate XML for PowerShell coverage
* Use whitelist to exclude coverage run on non content plugins
* Remove uneeded ignore entry
* Try to reduce diff in cover.py
* Fix up coverage report package - ci_complete ci_coverage
* Initial commit for rate limiting
- Detects if error code is 429
- Pauses for random time between .5 and 5 seconds before retrying
- If it fails 10 times, give up and tell user
* Redo structure of request() to support rate limiting
* Hold down timer is now a sliding scale
- 3 * number of retries
- Fails after the 30 second wait
* Whitespace fixes
* Redo implementation using decorators
- Errors aren't tested but code works for regular calls
* Unit tests work for error handling
* Add integration tests for successful retries
* Add condition for 502 errors and retry
* Move _error_report out of the class
* PEP8 fixes
* Add changelog entry
ansible-test: async deployment w/ vcenter provider
So far, `ansible-test`'s vcenter provider was trigger by a blocking POST
call. Since the depoyment take a lot of time (> 8m), we decided to use
an async call instead and poll the API server until the deployment
is ready.
`vmware_guest_disk_info` expects the VM to be running. Since
964783fbd2, `prepare_vmware_tests`
creates the test VM with the `powered-off` state. This to increase
the performance.
This commit ensures the test-suite actually run against a running VM,
as expected.
* Add controller ownership and cache without batteries option
* Add unit test for new netapp_e_volume options
* Add integration tests for netapp_e_volume module.
* Changed default read_ahead_enable option to true in netapp_e_volume module.
* Fix off-segment aligned volume size in netapp_e_volume module.
* add module to create aci VMM credential objects
add initial remove and add integration tests for VMM credential objects
* update 'credential' var name to 'name'
* move vmware tests to domain type specific file
* move vmware tests to domain type specific file
add include task in main file to reference domain type specific tests
* update task names
add test to remove credential prior to first credential add
add tests for querying individual credentials
add tests for query all credentials
add additional tests for removing credentials
* update version added to 2.9
remove invalid module references from 'seealso' section
* fix list reference in query all assertions
* add reference to VM_PROVIDER_MAPPING keys for vm_provider arg
* FortiOS System Fimrware Upgrade Module
* default timeout 12 seconds is not enough for large firmware or slow connection, increase it to 300 seconds
* update fortios system firmware upgrade module together with unit test
* minor updates based on the new templates
* minor updates and remove fortiosapi dependency in unit test module
* add author, remove unused method, fix descriptions, apply some sanity fixes
* FortiOS modules for 2.9 - 9
* Undo ignore file
* Remove non valid identifiers
* Leave fortios_switch_controller_lldp_profile and fortios_switch_controller_managed_switch out of this PR
* Updated fortios_switch_controller_lldp_profile and fortios_switch_controller_managed_switch
* Fix junos resource modules group based config and minor updates
Fixes https://github.com/ansible/ansible/issues/61183
* Add support to get inherited configuration for resource
modules to handle group based configuration
* Add task input check for merged, replaced and overridden
states in junos resource modules
* Integration test for group based configuration
* Fix CI test failures
* Fix test failures
* Fortinet's new module for fortios_wireless_controller_hotspot20_hs_profile
* Update fortios_wireless_controller_hotspot20_hs_profile.py and test_fortios_wireless_controller_hotspot20_hs_profile.py
* Remove pointless sanity tests on `bin` dir.
* Update action-plugin-docs test for collections.
* Update no-main-display test for collections.
* Update empty-init test for collections.
* Update no-assert test for collections.
* Move required-and-default-attributes test.
This test only applies to Ansible itself.
* Update use-argspec-type-path test for collections.
* add azure monitor log profile module
* fix version
* fix lint
* mark test as unsupported
* fix lint
* fix lint
* Fix the error prompted in the comments