* Fix YAML error message when error is at the end of the file
If a YAML file fails to load due to a syntax error in a file, or there is an error in the last line of a
file, PyYAML reports the last line number of the file as the index where the error occurred.
When reading the file lines, we use that index to the get the relevant line. If the index value is out
of range, the relevant line is lost for error reporting.
Subtract one from the index value to avoid the IndexError in this specific scenario. It is possible
to still get an IndexError, which will be handled as it is currently.
* Update existing tests and add new tests
* Allow restricting config values to enumerated list
* dont document internal entries
* also ignore private defs for ansible-config
* remove invalid value from tests
* added porting entry
When the pause module is run in the background and seconds parameter is provided,
do not warn.
* Add tests
* Fix existing tests
The test wasn't failing when it should have.
Change:
- On CentOS Stream, make distribution_release be "Stream"
- On CentOS Core, it continues to be "Core"
- Implement custom distribution file parser for CentOS, so we can look
for "CentOS Linux" and "CentOS Stream"
- Two new fixtures introduced (CentOS Linux 8.1 and CentOS Stream 8)
- Removed two dicts from `Distribution` class that were seemingly not
used anywhere.
Test Plan:
- ci_complete
- New test fixtures
Tickets:
- Fixes#73027
Signed-off-by: Rick Elrod <rick@elrod.me>
* Remove unused code in ansible-test.
* Remove obsolete endpoint logic from ansible-test.
* Remove obsolete region selection in ansible-test.
* Remove obsolete port logic in ansible-test.
* Clean up ansible-test remote providers.
Do the right thing on Linux when password lock and a password hash are provided by writing
out the password hash prepended by the appropriate lock string rather than using -U and -L.
This is the correct way to set and lock the account in one command.
On BSD, run separate commands as appropriate since locking and setting the password cannot
be done in a single action.
FreeBSD requires running several commands to get the account in the desired state. As a result,
the rc, output, and error from all commands need to be combined and evaluated so an accurate
and complete summary can be given at the end of module execution.
* Improve integration tests to cover this scenario.
* Break up user integration tests into smaller files
* Properly lock account when creating a new account and password is supplied
* Simplify rc collection in FreeBSD class
Since the _handle_lock() method was added, the rc would be set to None, which could make
task change reporting incorrect. My first attempt to solve this used a set and was a bit too
complicated. Simplify it my comparing the rc from _handle_lock() and the current value of rc.
* Improve the Linux password hash and locking behavior
If password lock and hash are provided, set the hash and lock the account by using a password
hash since -L cannot be used with -p.
* Ensure -U and -L are not combined with -p since they are mutually exclusive to usermod.
* Clarify password_lock behavior.
Tests should use the Python built-in ``venv`` module on Python 3 instead of the standalone ``virtualenv`` module.
On Python 2 the ``virtualenv`` module continues to be the only option.
The version installed is either the OS packaged version or the last release to support Python 2, which is version 16.7.10.
Change:
- Internally, use dnf.subject.Subject#get_best_query for state: absent
- Add a bunch of tests for removing packages, given a bunch of different
pkg specs (nv, nvr, nvra, wildcard, etc.)
Test Plan:
- New tests
- Local experiments with DNF API via PDB.
Tickets:
- Fixes#72809
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Changes to make F33 work with current tests
- Add F33 to docker.txt
- Add F33 to AZP config
Test Plan:
- ci_complete
Signed-off-by: Rick Elrod <rick@elrod.me>
* Replace the use of the function string.replace() with the method str.replace()
because that's what works for both Python 2 and 3.
* Cleanup the unused string import.
Added a changelog fragment.
* The documentation for os.write() seems a bit iffy, but in Python 3 we
definitely cannot pass it a string and we need to encode it into
bytes.
The Python documentation at
https://docs.python.org/3/howto/pyporting.html#text-versus-binary-data
says that this code will work in Python 2 as well.
Co-authored-by: Lloyd Parkes <lloyd@must-have-coffee.gen.nz>
Change:
- The FreeBSD release can contain -RC or -PRERELEASE in addition to
-RELEASE, -STABLE, or -CURRENT.
Test Plan:
- Added new fixed from an RC version of TrueNAS which uses a -PRERELEASE
version of FreeBSD.
Tickets:
- Fixes#72331
Signed-off-by: Rick Elrod <rick@elrod.me>
* ExecutionPolicy default value is RemoteSigned
##### SUMMARY
In Windows setup steps, settings `ExecutionPolicy` is restored to value `Restricted`. But actually default value for Windows server is not `Restricted` but `RemoteSigned` ([source](https://docs.microsoft.com/en-us/powershell/module/microsoft.powershell.core/about/about_execution_policies?view=powershell-7.1#default)).
I have got issue with `win_dsc` because `ExecutionPolicy` was `Restricted`.
##### ISSUE TYPE
- Docs Pull Request
+label: docsite_pr
* Add changelog fragment
* Apply suggestions from code review
Co-authored-by: Sandra McCann <samccann@redhat.com>
* arg_spec - move type checking lookup method to a function
* Change get_wanted_type name and behavior
Change the name to get_validator to bette describe what it is doing.
Change the interface to always return a value. This lines up with the behavior of get_*
functions always returning something or None and check_* functions raising an
Exception if something went wrong during the check.
* Add param to check_type_str()
Not meant to be a long term fix, but gets tests passing. More work is needed to figure
out how to solve this cleanly.
* Remove private attribute mapping types to validator
Since the function that needs it has moved to parameters.py, there is no need to have it as
a attribute of AnsibleModule.
Update tests that were referencing the private attribute.
* Use private method for 'str' type
To avoid having to put the string conversion warning behavior in the check_type_str() method,
use the private _check_type_str() method for 'str' type.
Import CHECK_ARGUMENT_TYPES_DISPATCHER for backwards compalitibility and store it as
a private attribute.
Revert changes to support plugins that are referencing serf._CHECK_ARGUMENT_TYPES_DISPATCHER.
* Add changelog
* Change function name to better reflect its... function
* Change dict name to better reflect its contents
CHECK_ARGUMENT_TYPES_DISPATCHER --> DEFAULT_TYPE_VALIDATORS
* Fix changelog
* systemd - do not overwrite unit name when searching
PR #72702 introduced a bug that changed the unit name when splitting it up for the purpose
of searching for the unit. This only happens on unit file templates on systems that have a 5.8
or newer kernel and a version of systemd that does not contain a bugfix that causes systmed
to fail to parse dbus.
* Use facts rather than a manual probe to determine if systmed is present
* Remov unnecessary block
* Use vars files instead of set_fact
* Add tests for using a templated unit file
* Update changelog fragment
* Use template to get correct path to sleep binary
* import_playbook - change additional params to deprecation
I incorrectly recommended this be set as a warning when it should have been a deprecation.
* Fix deprecation sanity test to not required a collection name when not inside a collection
Also pin virtualenv to 16.7.10 for older Mac OS X systems. This was the version being installed
anway with the previous constraint (<20).
On systems with Python 3, now prefer venv over virtualenv. Test to see if venv is functional since
some systems have a non-functional venv installation (such as Debian).
* Update yum/dnf module docs to include version comp
Fixes#61234
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix up docs syntax to sanity tests are happy
Signed-off-by: Adam Miller <admiller@redhat.com>
* ansible-galaxy collection list and verify now utilize collections in site-packages.
This is a short term fix for #70147. The long term fix needs to handle
install (but that discussion is also bound up in how upgrade is going to
work and where things can get installed so it's deferred for 2.11.)
* Add test for ansible-galaxy collection list with site-packages
* Fix sanity issue
Co-authored-by: David Moreau Simard <moi@dmsimard.com>
Co-authored-by: Jordan Borean <jborean93@gmail.com>
On python3 sys.stdin is an encoded file object that does not support
reading raw binary data. Use the supplied buffer object to do so.
Signed-off-by: Sven Wegener <sven.wegener@inovex.de>
Co-authored-by: Sven Wegener <sven.wegener@inovex.de>
This should allow users to extract specific files from an archive as
desired.
Fixes#16130, #27081.
* Rebase and make a few minor changes
* Add changelog
* Improve tests
- move to separate tasks file
- change assertions to check for exactly one file
- use remote_tmp_dir for output dir
* Make exclude and include mutually exclusive
* Don't remove files needed by other tasks
* Fix sanity tests
* Improve feature documentation
* Skip tests that use map() on CentOS 6
* Use fnmatch on include for zip archives
This matches the behavior of exclude
Co-authored-by: Sam Doran <sdoran@redhat.com>
* Remove space before comma in '... bla , use ...'
* 'why' is inserted in the middle of a sentence, between two commas.
* Make deprecations from base.yml show source ansible-core.
* Add changelog fragment.
* Improve some more 'why's.
* Add PR URL to fragment.
* file: add symlink is in a sticky directory tests
* file: handle symlink in a sticky directory
Co-Authored-By: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* Add changelog and fix unit test
The builtins import was removed since it was unused, but it is now needed.
The recently released version of cffi fails to install on systems with an older version of gcc. In
our case, this in the CentOS 6 test image. There is a fix but it has not yet been released.
https://foss.heptapod.net/pypy/cffi/-/issues/480
* Move _syslog_facitily to __init__
No good reason it should not be set for each object
* Move internal property setting to private method
* Create check_arguments() function
* Remove unused import
* Rename function to better match its behavior
Change the behavior to return a set, either empty or populated, with unsupported keys.
Accept legal_inputs as optional which will not required calling handle_aliases before calling
get_unsupported_parameters().
* Add changelog
* Rework function behavior and documentation
I realized I missed the original intent of this method when moving it to a function. It
is meant to compared the parameter keys to legal inputs always, not compare
parameter keys to argument spec keys, even though the argument spec keys should
be a subset of legal inputs.
* Add tests
* Fix typo.
* Set internal properties when handling suboptions
We could not find reason for the docutils install so trying out removing it.
Also bumping to latest version of ansible-runner
Skip all python2 versions because next ansible-runner drops it
Co-authored-by: Elijah DeLee <kdelee@redhat.com>
Change:
- Initial set of changes for renaming to ansible-core
- Includes changelog fragment changes from base -> core
- Does NOT include docs changes
- Modifies detection stuff in setup.py to support ansible<2.9 and ansible-base
Test Plan:
- ci_complete
* Fix super annoying Python 2.6 multiprocessing.Queue stack trace in CI
A bug exists in Python 2.6 that sometimes raises an exception during interpreter shutdown. We
encounter this frequently in our CI since we run tests on CentOS 6 as the control node, which
has Python 2.6.6 with this bug.
This PR adds a very minor sleep only on Python 2.6 which gets around this issue. I did lot of testing
using a standalon script I found that easily duplicated the issue to find the minimum sleep value
needed to avoid this issue.
CPython issue: https://bugs.python.org/issue4106
Fix in CPython: https://hg.python.org/cpython/rev/d316315a8781
* Use correct attribute
* Consolidate logic for determining whether or not session is interactive
into a single function, is_interactive()
* Increase test coverage
I wasn't able to find a good way of simulating running a backgrounded test with CI since the
whole test is essentially run not in a TTY, which is similar enough to cause the new is_interactive()
function to always return false.
* add return documentation for unarchive, add fragment for changelog, apply suggestions from code review
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Added caching mechanism for Galaxy API requests
* Add cache options and split up code
* Added unit tests
* Fix sanity test
* Use modified date and fix up caching for explicit servers
* Make sure credentials are not in cached server name
* Added test for getting updated cache version
* Changes from review
Change:
- Bump default, ansible-base, distro containers
- We do NOT add fedora33 yet, because it doesn't work right on Shippable
due to an old kernel. This will be added post-AZP.
Test Plan:
- CI
Signed-off-by: Rick Elrod <rick@elrod.me>
* Reorder comment postition
* Add comment unit test
* Fix unit test
* Fix unit test
* Add changelog
* Add paramaters which would be problematic without this fix
* Fix typo
* Fix unit test
* Fix unit test
* Emit warning when running on the controller with a Python older than 3.8
* Add spaces
Co-authored-by: Matt Clay <matt@mystile.com>
* and more spaces
Co-authored-by: Matt Clay <matt@mystile.com>
* s/Py/Python/
Co-authored-by: Matt Clay <matt@mystile.com>
* Add note to Control node requirements about Py3.8 requirement
* Add collection_name to deprecated call
* more spaces
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* Clarify that we are only packaging for py3.8+
Co-authored-by: Matt Clay <matt@mystile.com>
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* Fix 'role_name : tast_name' notation if task contains role name
* Add tests for notifying handler names which contain the role name
Co-authored-by: Thomas Wouters <thomaswouters@gmail.com>
* Support docker and k8s action groups for moved modules in community.docker and community.kubevirt.
* Also support k8s action group for community.okd.
* Also add kubernetes.core.
* Adjust PR #.
* Fix changelog fragment.
* Remove community.okd.
* Revert "Remove community.okd."
This reverts commit 812b5aa6e2.
* ansible-doc: export has_action when --json is used.
* Remove docuri and now_data, which were not used resp. ignored in format_plugin_doc and the functions it calls anyway.
* Add function _combine_plugin_doc.
Sam Doran