* Map Debian 8 to Python 2
If Python 3 is installed on Debian 8 Ansible cannot run, as the version
is too old (3.4)
* Add integration test for python interpreter discovery on Debian 8
* fix test issue on Debian 9, add changelog
* un"fix" not broken test :D
Co-authored-by: Fabian Klemp <fabian.klemp@elara-gmbh.de>
Co-authored-by: Matt Davis <mrd@redhat.com>
* Add umask option to user module
* Fail on setting both umask and local: True
* Add integration test
* Add changelog
* Run integration tests only if HOME_MODE is not set
* Run integration tests only on Linux
Co-authored-by: Matt Clay <matt@mystile.com>
* fix module schema
not out of date hardcoded list anymore, uses 'current + 4' to
set valid deprecation targets
Co-authored-by: Matt Clay <matt@mystile.com>
Change:
- Newer Solaris drops setfacl. Add a fallback for its chmod ACL syntax.
Test Plan:
- New units
Tickets:
- Fixes#74282
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Regression introduced in #70785
- When macOS chmod ACL syntax is used, Solaris-derived chmods return
with a status of 5. This is also used for our sshpass handling,
because sshpass will return 5 on auth failure. This means on Solaris,
we incorrectly assume auth failure when we reach this branch of logic
and try to run chmod with macOS syntax.
- We now wrap this specific use of chmod in an exception handler that
looks for AnsibleAuthenticationFailure and skips over it. This adds
another authentication attempt (something we normally avoid to prevent
account lockout), but seems better than the regression of not allowing
other fallbacks to be used.
- Without this patch, if setfacl fails on Solaris (and sshpass is used),
we do not try common_remote_group or world-readable tmpdir fallbacks.
Test Plan:
- New unit
Signed-off-by: Rick Elrod <rick@elrod.me>
- Unit tests for `modules` and `module_utils` are now limited to importing only `ansible.module_utils` from the `ansible` module.
- Unit tests other than `modules` and `module_utils` are now run only on Python versions supported by the controller (Python 3.8+).
- Unit tests are now run in separate contexts (`controller`, `modules`, `module_utils`), each using separate invocations of `pytest`.
* Handle netconf plugin ncclient import error when running in FIPS mode
* While running in FIPS mode importing ncclient result in
InternalError raised by cryptography
* Refer https://github.com/ansible/ansible/pull/65477
- Improve code reuse.
- Add missing type hints, fix existing ones and convert them to PEP 484 style.
- Add missing imports and clean up existing ones.
- Add missing docstrings and clean up existing ones.
This simplifies rendering the hostname (or hostname+delegated host) in
the default callback module, and reduces code duplication
I've chosen not move where in each handler the host label is rendered,
in case subsequent operations has side effects. However I'm happy to
change that if considered safe.
I've chosen not to change the formatting operator used (%), to avoid
changes in rendering that might result.
Signed-off-by: Alex Willmer <alex@moreati.org.uk>
Change:
- We were passing a directory name directly to re.compile().
If the directory isn't valid regex (or is) this can have odd side
effects, such as crashing.
- Fix a few other similar cases, but less likely to be a real issue.
Test Plan:
- New test
Signed-off-by: Rick Elrod <rick@elrod.me>
* Catch errors getting filters, and fail
* Add changelog
* Switch to warnings instead of errors, to match other plugin loader behavior
* Add tests
* Handle collections
* deprecated include
Update lib/ansible/modules/_include.py
updated version numbers in schema check (real fix in separate PR)
Co-authored-by: flowerysong <junk+github@flowerysong.com>
Co-authored-by: Matt Clay <matt@mystile.com>
* various fixes to command
- Updated splitter to allow for all expected args in ad-hoc
- Ensure we always return the returns we promissed to always return (i.e stderr/stdout)
- Updated docs to clarify creates/removes precdence in checking
- Removed abspath from chdir to allow reporting to handle symlinks correctly
- Corrected tests to new output messages
Co-authored-by: Felix Fontein <felix@fontein.de>
* Support omitting the trailing separator when a dictionary key's value is an empty string
* Support a default value when the value used in the group name is an empty string
* Add tests
* change log
Change:
- When a "distro" package exists in PYTHONPATH but isn't what we expect,
fall back to our own vendored one and use it. This prevents a
traceback if someone has some random thing that provides "distro" but
isn't actually the "distro" library we need.
Test Plan:
- new tests
Tickets:
- Fixes#74228
Signed-off-by: Rick Elrod <rick@elrod.me>
* nuke playbook test file
Signed-off-by: Rick Elrod <rick@elrod.me>
* test fixes
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Tests for advanced_host_list; it is now at 100% coverage.
- There was a typo (host vs hostnames) where when the host pattern
failed to parse, instead of treating the name as a literal as
intended, it would trigger UnboundLocalError. This didn't fatal
as there's a global "Exception" handler below, but it did lead to
an ugly error and incorrect behavior.
Test Plan:
- New tests
- Local experimenting
Signed-off-by: Rick Elrod <rick@elrod.me>
* changelog
Signed-off-by: Rick Elrod <rick@elrod.me>
* fix tests
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Variables used in ``when`` conditionals are no longer parsed and
attempted to be converted to booleans. All non-empty strings are
considered true (empty strings, false).
Test Plan:
- Updated existing tests
- Added a bunch of new tests with various kinds of truthy/falsy
values.
Tickets:
- Fixes#74134
Signed-off-by: Rick Elrod <rick@elrod.me>
use load_name of valid plugin to find config, will handle the renamed loaded plugin that collections do:
`ansible_collection.<ns>.<collname>.plugins.<type>.<name>`
Change:
- Previously when the same package name was installed twice under
different architectures, we only reported it once in changes.updated.
- This was the result of using a dict internally and keying on package
name alone.
- This change still keys on package name but turns the values into lists
which can contain multiple packages per name.
Test Plan:
- Added a lot of tests around multi-arch support
- Added some tests around virtual provides as well
Tickets:
- Fixes#73284
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Remove two deprecated features
- We now error if a playbook is an empty list instead of just skipping
- We now error if using 'include' instead of 'import_playbook'
Test Plan:
- Added new tests for new errors
Tickets:
- Fixes#74133
Signed-off-by: Rick Elrod <rick@elrod.me>
* sanity & changelog
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Require name always
- Drop 'reboot' parameter in favor of 'special_time: reboot'
Test Plan:
- CI
Tickets:
- fixes#74132
Signed-off-by: Rick Elrod <rick@elrod.me>
The `a/` and `b/` prefixes can be disabled in the `git diff` output by setting
`diff.noprefix` to `true`. The output is still a valid diff, but `ansible-test` would
raise an exception since without the prefixes, it thought the diff line was invalid.
* --offline allows in-place verify for installed collections with manifests
* manifest hash, collection name, version, and path are now always displayed
* test updates
* Begin using ArgumentSpecValidator in AnsibleModule
* Add check parameters to ArgumentSpecValidator
Add additional parameters for specifying required and mutually exclusive parameters.
Add code to the .validate() method that runs these additional checks.
* Make errors related to unsupported parameters match existing behavior
Update the punctuation in the message slightly to make it more readable.
Add a property to ArgumentSpecValidator to hold valid parameter names.
* Set default values after performining checks
* FIx sanity test failure
* Use correct parameters when checking sub options
* Use a dict when iterating over check functions
Referencing by key names makes things a bit more readable IMO.
* Fix bug in comparison for sub options evaluation
* Add options_context to check functions
This allows the parent parameter to be added the the error message if a validation
error occurs in a sub option.
* Fix bug in apply_defaults behavior of sub spec validation
* Accept options_conext in get_unsupported_parameters()
If options_context is supplied, a tuple of parent key names of unsupported parameter will be
created. This allows the full "path" to the unsupported parameter to be reported.
* Build path to the unsupported parameter for error messages.
* Remove unused import
* Update recursive finder test
* Skip if running in check mode
This was done in the _check_arguments() method. That was moved to a function that has no
way of calling fail_json(), so it must be done outside of validation.
This is a silght change in behavior, but I believe the correct one.
Previously, only unsupported parameters would cause a failure. All other checks would not be executed
if the modlue did not support check mode. This would hide validation failures in check mode.
* The great purge
Remove all methods related to argument spec validation from AnsibleModule
* Keep _name and kind in the caller and out of the validator
This seems a bit awkward since this means the caller could end up with {name} and {kind} in
the error message if they don't run the messages through the .format() method
with name and kind parameters.
* Double moustaches work
I wasn't sure if they get stripped or not. Looks like they do. Neat trick.
* Add changelog
* Update unsupported parameter test
The error message changed to include name and kind.
* Remove unused import
* Add better documentation for ArgumentSpecValidator class
* Fix example
* Few more docs fixes
* Mark required and mutually exclusive attributes as private
* Mark validate functions as private
* Reorganize functions in validation.py
* Remove unused imports in basic.py related to argument spec validation
* Create errors is module_utils
We have errors in lib/ansible/errors/ but those cannot be used by modules.
* Update recursive finder test
* Move errors to file rather than __init__.py
* Change ArgumentSpecValidator.validate() interface
Raise AnsibleValidationErrorMultiple on validation error which contains all AnsibleValidationError
exceptions for validation failures.
Return the validated parameters if validation is successful rather than True/False.
Update docs and tests.
* Get attribute in loop so that the attribute name can also be used as a parameter
* Shorten line
* Update calling code in AnsibleModule for new validator interface
* Update calling code in validate_argument_spec based in new validation interface
* Base custom exception class off of Exception
* Call the __init__ method of the base Exception class to populate args
* Ensure no_log values are always updated
* Make custom exceptions more hierarchical
This redefines AnsibleError from lib/ansible/errors with a different signature since that cannot
be used by modules. This may be a bad idea. Maybe lib/ansible/errors should be moved to
module_utils, or AnsibleError defined in this commit should use the same signature as the original.
* Just go back to basing off Exception
* Return ValidationResult object on successful validation
Create a ValidationResult class.
Return a ValidationResult from ArgumentSpecValidator.validate() when validation is successful.
Update class and method docs.
Update unit tests based on interface change.
* Make it easier to get error objects from AnsibleValidationResultMultiple
This makes the interface cleaner when getting individual error objects contained in a single
AnsibleValidationResultMultiple instance.
* Define custom exception for each type of validation failure
These errors indicate where a validation error occured. Currently they are empty but could
contain specific data for each exception type in the future.
* Update tests based on (yet another) interface change
* Mark several more functions as private
These are all doing rather "internal" things. The ArgumentSpecValidator class is the preferred
public interface.
* Move warnings and deprecations to result object
Rather than calling deprecate() and warn() directly, store them on the result object so the
caller can decide what to do with them.
* Use subclass for module arg spec validation
The subclass uses global warning and deprecations feature
* Fix up docs
* Remove legal_inputs munging from _handle_aliases()
This is done in AnsibleModule by the _set_internal_properties() method. It only makes sense
to do that for an AnsibleModule instance (it should update the parameters before performing
validation) and shouldn't be done by the validator.
Create a private function just for getting legal inputs since that is done in a couple of places.
It may make sense store that on the ValidationResult object.
* Increase test coverage
* Remove unnecessary conditional
ci_complete
* Mark warnings and deprecations as private in the ValidationResult
They can be made public once we come up with a way to make them more generally useful,
probably by creating cusom objects to store the data in more structure way.
* Mark valid_parameter_names as private and populate it during initialization
* Use a global for storing the list of additonal checks to perform
This list is used by the main validate method as well as the sub spec validation.
When using "use_regex: yes" and setting an excludes: without
specifying a pattern: the existing code passes the file-glob '*' to
the regex matcher. This results in an internal invalid-regex
exception being thrown.
This maintains the old semantics of a default match-all for pattern:
but switches the default to '.*' when use_regex is specified.
The code made sense as-is before excludes: was added (2.5). In that
case, it made no sense to set use_regex but *not* set a pattern.
However, with excludes: it now makes sense to only want to exclude a
given regex but not specify a specific matching pattern.
Closes: #50067
* moved change to new location
added changelog
* Update lib/ansible/modules/find.py
Co-authored-by: Ian Wienand <iwienand@redhat.com>
* Fix a bug adding unrelated candidates to the plugin loader redirect_list
* Add tests for the redirect list
* test redirect list for builtin module
* test redirect list for redirected builtin module
* test redirect list for collection module
* test redirect list for redirected collection module
* test redirect list for legacy module
* changelog
Ansible can gather distribution facts for older Amazon Linux
with /etc/os-release data.
Fixes: #73946
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* ansible-pull: run all playbooks when multiple are supplied
* add test for ansible-pull with multiple playbooks supplied from cli
* add changelog fragment
* Catch more potential errors (and increase false-positive rate).
* Flag some false-positives in lib/ansible/modules/ with no_log=False.
Co-authored-by: John Barker <john@johnrbarker.com>
* add optional module_utils import support
Treat core and collections module_utils imports nested within any Python block statement (eg, `try`, `if`) as optional. This allows Ansible modules to implement runtime fallback behavior for missing module_utils (eg from a newer version of ansible-core), where previously, the module payload builder would always fail when unable to locate a module_util (regardless of any runtime behavior the module may implement).
* sanity test fixes
ci_complete
* finish migrating ssh plugin to config system
fixes#72739fixes#57220
* fix connection detection in reset
* correct options for connection meta reset
Co-authored-by: David Shrewsbury <Shrews@users.noreply.github.com>
The file module changes existing sym links from relative to absolute
if the src is not stated in the tasks since it uses `os.path.realpath`
to fetch the link source and not `os.readlink`. Changed that.
* galaxy: restore left hand slicing in assignment
Fix 'ansible-galaxy role init --role-skeleton=role-skeleton' when the role skeleton
contains an ignored directory.
The issue was because the 'dirs' variable was changed to reference a different list,
but needs to be mutated instead to stop os.walk from traversing ignored directories.
Fixes: #71977
Co-authored-by: Abhijeet Kasurde <akasurde@redhat.com>
Change:
- Fix regression: unhandled exception when given inventory directory
is empty or contains empty subdirectories.
- Fix unhandled exception when limit file is actually a directory
instead of a file.
- Fix inventory tests which previously could never fail due to missing
`set -e`. Fixed up tests that failed after `set -e` was added. Added
several tests.
Test Plan:
- New tests
- Fixed existing tests which previously could never fail
Tickets:
- Fixes#73658
Signed-off-by: Rick Elrod <rick@elrod.me>
* Manage the in-memory cache in _call_galaxy but let the caller set the file cache after getting paginated results
* Add a test for caching successful and not caching unsuccessful paginated results
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* Initial import of modified version of alikins' code
* Add unit testing for new Role methods
* Fix validate_arg_spec module for sanity test. Add test_include_role_fails.yml integration test from orig PR.
* Add testing of suboptions
* Use new ArgumentSpecValidator class instead of AnsibleModule
* fix for roles with no tasks, use FQ name of new plugin
* Add role dep warning
Allow constructed to optionally use vars plugin data
* mostly for those looking to leverage group_vars/ and host_vars/
* limited to already processed sources
Ensure `yamllint`'s `check_assignment()` correctly ignore the
attribute assignment. Those don't have any `.id` attribute and will
trigger an `AttributeError` exception.
See: https://github.com/ansible/ansible/pull/73322
Only add data when there is data to add
also avoid clobbering existing data with empty file
fixes#45843
* remove redundant code, update comments
* fix mock dataloader, original does not return None
* added test
* module compat for py3.8+ controller
* replaced internal usages of selinux bindings with internal ctypes binding (allows basic selinux operations from any Python interpreter), plus tests
* added new respawn_module API to allow modules to import Python packages that are only available under a well-known interpreter, plus tests
* added respawn logic to modules that need Python libs from a specific system interpreter (apt, apt_repository, dnf, yum)
minimize internal HAVE_SELINUX usage
spurious junk
pep8
* pylint fixes
* add RHEL8 Python 3.8 testing
* more pylint
* import sanity
* unit tests
* changelog update
* fix a bunch of stuff
* tweak changelog
* fix setup_rpm_repo on EL8
* misc sanity/test fixes
* misc feedback tweaks
* fix import fallback in test module
* fix selinux MU test
* fix dnf tests to avoid python-dependent test packages
* add trailing LFs to aliases
* fix yum tests to avoid test package with Python deps
* hack create_repo for EL6 to create noarch package
* Upgrade pylint and deps in ansible-test.
* Enable pylint on Python 3.9.
* Update pylint config.
* Add ignore for vendored six.
* Add ignores for support plugins.
* Fix issue reported by pylint.
When running in verbosity <2, display the file and line number for tasks that fail. This provides
useful information without having to run at increased verbosity.
* Move _print_task_path to CallbackBase class
* Add integration tests
* Add color parameter to _print_task_path()
* Keep color output consistent for now
Currently the path is display with COLOR_DEBUG formatting with verbosity >= 2.
Instead of the color of the path changing based on verbosity level, just keep it at the
currently behavior of COLOR_DEBUG. Having the color of the same information change
based on verbosity level seems incorrect and makes visual parsing of the information
more difficult.
Co-authored-by: tahar.jegham <jeghamseifeddine@gmail.com>
* Docker content from community.general migrated to community.docker.
* Hetzner Robot content from community.general migrated to community.hrobot.
* RouterOS content from community.network migrated to community.routeros.
* PostgreSQL content from community.general migrated to community.postgresql.
* OC content from community.general migrated to community.okd.
* Cisco NSO content from community.network migrated to cisco.nso.
* Add changelog fragment.
* Google content from community.general migrated to community.google.
* Hashi Vault content from community.general migrated to community.hashi_vault.
* KubeVirt content from community.general migrated to community.kubevirt.
* FortiOS content from community.network migrated to community.fortios.
* Update changelog fragment.
* DellEMC content from community.general migrated to dellemc.openmanage.
* treat oracle same as rhel/centos
* fix misunderstood use of yaml anchors
* add changelog fragment
* Update changelogs/fragments/73498-INTERPRETER_PYTHON_DISTRO_MAP-Treat-oracle-same-as-rhel-centos.yml
* Include all collections in single json object / yaml document
* Add tests
* For galaxy list yaml/json output, use dictionary of dictionaries instead of list
* Add tests for listing single collection in yaml / output format
* --output -> --format
* Add explicit test for listing collection in human format
* Fix bug where empty json object was emitted + add test
* add changelog fragment for #71979 (ca_path for uri)
* add integration tests for ca_path in the uri module
* return path of ca cert instead of its content
* connect to port 444 on self_signed_host
and use quay.io/ansible/http-test-container:1.3.0
* state that the certificate in ca_path is used for validation
* Fix regression introduced in b77abd0491 causing bug in inventory modules which break functionality in user setting use_contrib_script_compatible_sanitization parameter.
* Add changelog
Co-authored-by: s-hertel <19572925+s-hertel@users.noreply.github.com>
* introduce self-signed.ansible.http.tests
* forwarding of port 444
* forward port 8444 to port 444 on http test container
* Fix port forwarding for Windows under docker
* add changelog fragment
Co-authored-by: Jordan Borean <jborean93@gmail.com>
* validate_modules: fails with .id attribute not found
This patch addresses a problem in the `found_try_except_import` test.
This module tries to identify lines like:
`HAS_FOO = True`
In this case, the target (`HAS_FOO`) is of type `ast.Name` and has a
`id` attribute which provide the name.
In my case, I've a line that set a module attribute`. In this case, the
target (`module.var`) has the type `ast.Attribute` and no `id`
attribute. The code trigger an `AttributeError` exception.
This patch ensures we compare a `ast.Name`.
* Update test/lib/ansible_test/_data/sanity/validate-modules/validate_modules/main.py
Change:
- Remove check that states that only Fedora can be an OSTree
distribution.
- This allows us to correctly return "atomic_container" as the pkg_mgr
fact for RHEL for Edge, Fedora/RHEL/CentOS Atomic Host, etc.
Test Plan:
- Created local RHEL for Edge image and tested against it.
- Tested against regular RHEL 8 and still got `dnf` as expected.
- Tested against RHEL 7 Atomic Host and got `atomic_container` now.
- New unit tests.
Tickets:
- Fixes#73084
Signed-off-by: Rick Elrod <rick@elrod.me>
ansible-galaxy currently behaves bad then a role to be installed
contains ~ or $ at any place in the path of a file in that role.
It extracts the parent directory of the offending path level as an
empty file. This explodes if that directory contains anything else.
Change this behaviour. `~` is now allowed allowed when it is
not a full level (Yes: `some~thing/`, no: `~/`). The code should
get refactoring in an other PR.
The `UserFactCollector` queries the user login name via
`getpass.getuser()` and looks up the corresponding entry
in the password database.
The login name may differ from the actual user name,
eg. if the `LOGNAME` env variable is set. The lookup
fails in this case. Added a fallback in this case that
tries to get the entry via the user ID.
This warning was intended to help improve test environment configuration.
However, it has ended up producing mostly non-actionable warning noise instead.
In most situations a missing pip or python should result in test failures.
Reporting a missing pip also implies that it should be used by tests, which is not the case.
Tests should be invoking pip as a python module with the appropriate python interpreter instead.
Change detection and check mode fixes for apt_key
* allow apt-key to use proxies
* add note about deprecation of apt-key itself
* expanded error msgs
* show all keys
* fix short_format parsing
* added more return info and documented it
PR #72591
This change:
* Adds an artifacts manager that abstracts away extracting the
metadata from artifacts, downloading and caching them in a
temporary location.
* Adds `resolvelib` to direct ansible-core dependencies[0].
* Implements a `resolvelib`-based dependency resolver for
`collection` subcommands that replaces the legacy
in-house code.
This is a dependency resolution library that pip 20.3+ uses
by default. It's now integrated for use for the collection
dependency resolution in ansible-galaxy CLI.
* Refactors of the `ansible-galaxy collection` CLI.
In particular, it:
- reimplements most of the `download`, `install`, `list` and
`verify` subcommands from scratch;
- reuses helper bits previously moved out into external modules;
- replaces the old in-house resolver with a more clear
implementation based on the resolvelib library[0][1][2].
* Adds a multi Galaxy API proxy layer that abstracts accessing the
version and dependencies via API or local artifacts manager.
* Makes `GalaxyAPI` instances sortable.
* Adds string representation methods to `GalaxyAPI`.
* Adds dev representation to `GalaxyAPI`.
* Removes unnecessary integration and unit tests.
* Aligns the tests with the new expectations.
* Adds more tests, integration ones in particular.
[0]: https://pypi.org/p/resolvelib
[1]: https://github.com/sarugaku/resolvelib
[2]: https://pradyunsg.me/blog/2020/03/27/pip-resolver-testing
Co-Authored-By: Jordan Borean <jborean93@gmail.com>
Co-Authored-By: Matt Clay <matt@mystile.com>
Co-Authored-By: Sam Doran <sdoran@redhat.com>
Co-Authored-By: Sloane Hertel <shertel@redhat.com>
Co-Authored-By: Sviatoslav Sydorenko <webknjaz@redhat.com>
Signed-Off-By: Sviatoslav Sydorenko <webknjaz@redhat.com>
While getting policy name in get_chain_policy API,
module does not require any additional parameters except chain
Enabling flag in get_chain_policy API call fixes this.
Fixes: #68612
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Use correct ssh executable and options in all cases on connection plugin
* Also nicer naming/comments
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
Ability to add local variables into AnsibleJ2Vars was added in
18a9eff11f to fix#6653. Local variables
are added using ``AnsibleJ2Vars.add_locals()`` method when creating a
new context - typically when including/importing a template with
context. For that use case local template variables created using
``set`` should override variables from higher contexts - either from the
play or any parent template, or both; Jinja behaves the same way.
Also removes AnsibleJ2Vars.extras instance variable which is not used.
Also adds missing test for #6653.
Fixes#72262Fixes#72615
ci_complete
The `command` module does not return stdout & sterr when calling
a non existing executable or an unknown exception arises. This fix
lets the module return empty byte strings in those cases.
Change:
- Add Ubuntu 20.04 to CI now that venv is default instead of virtualenv in ansible-test.
Test Plan:
- CI
Tickets:
- Fixes#69203
Signed-off-by: Rick Elrod <rick@elrod.me>
The init script for the test container writes additional lines to
the .bashrc of the user. This was done via a `cat` multiline
instruction, which is implemented internally by writing a
temporary file to TMPDIR (/tmp in this case) first. Docker fails
to provide /tmp just after creation, which results in a race
condition that rarely makes the init fail. Changed the `cat`
statement to multiple `echo`s.
Co-authored-by: Matt Clay <matt@mystile.com>
When calling compile(), the filename argument should be either a real file
name or a string. According to Python docs, suggested one is '<string>'.
Keep the current behaviour (encapsulate the actual expression),
but enclose it into angle brackets.
Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
* Fix YAML error message when error is at the end of the file
If a YAML file fails to load due to a syntax error in a file, or there is an error in the last line of a
file, PyYAML reports the last line number of the file as the index where the error occurred.
When reading the file lines, we use that index to the get the relevant line. If the index value is out
of range, the relevant line is lost for error reporting.
Subtract one from the index value to avoid the IndexError in this specific scenario. It is possible
to still get an IndexError, which will be handled as it is currently.
* Update existing tests and add new tests
* Allow restricting config values to enumerated list
* dont document internal entries
* also ignore private defs for ansible-config
* remove invalid value from tests
* added porting entry
When the pause module is run in the background and seconds parameter is provided,
do not warn.
* Add tests
* Fix existing tests
The test wasn't failing when it should have.
Change:
- On CentOS Stream, make distribution_release be "Stream"
- On CentOS Core, it continues to be "Core"
- Implement custom distribution file parser for CentOS, so we can look
for "CentOS Linux" and "CentOS Stream"
- Two new fixtures introduced (CentOS Linux 8.1 and CentOS Stream 8)
- Removed two dicts from `Distribution` class that were seemingly not
used anywhere.
Test Plan:
- ci_complete
- New test fixtures
Tickets:
- Fixes#73027
Signed-off-by: Rick Elrod <rick@elrod.me>
* Remove unused code in ansible-test.
* Remove obsolete endpoint logic from ansible-test.
* Remove obsolete region selection in ansible-test.
* Remove obsolete port logic in ansible-test.
* Clean up ansible-test remote providers.
Do the right thing on Linux when password lock and a password hash are provided by writing
out the password hash prepended by the appropriate lock string rather than using -U and -L.
This is the correct way to set and lock the account in one command.
On BSD, run separate commands as appropriate since locking and setting the password cannot
be done in a single action.
FreeBSD requires running several commands to get the account in the desired state. As a result,
the rc, output, and error from all commands need to be combined and evaluated so an accurate
and complete summary can be given at the end of module execution.
* Improve integration tests to cover this scenario.
* Break up user integration tests into smaller files
* Properly lock account when creating a new account and password is supplied
* Simplify rc collection in FreeBSD class
Since the _handle_lock() method was added, the rc would be set to None, which could make
task change reporting incorrect. My first attempt to solve this used a set and was a bit too
complicated. Simplify it my comparing the rc from _handle_lock() and the current value of rc.
* Improve the Linux password hash and locking behavior
If password lock and hash are provided, set the hash and lock the account by using a password
hash since -L cannot be used with -p.
* Ensure -U and -L are not combined with -p since they are mutually exclusive to usermod.
* Clarify password_lock behavior.
Tests should use the Python built-in ``venv`` module on Python 3 instead of the standalone ``virtualenv`` module.
On Python 2 the ``virtualenv`` module continues to be the only option.
The version installed is either the OS packaged version or the last release to support Python 2, which is version 16.7.10.
Change:
- Internally, use dnf.subject.Subject#get_best_query for state: absent
- Add a bunch of tests for removing packages, given a bunch of different
pkg specs (nv, nvr, nvra, wildcard, etc.)
Test Plan:
- New tests
- Local experiments with DNF API via PDB.
Tickets:
- Fixes#72809
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Changes to make F33 work with current tests
- Add F33 to docker.txt
- Add F33 to AZP config
Test Plan:
- ci_complete
Signed-off-by: Rick Elrod <rick@elrod.me>
* Replace the use of the function string.replace() with the method str.replace()
because that's what works for both Python 2 and 3.
* Cleanup the unused string import.
Added a changelog fragment.
* The documentation for os.write() seems a bit iffy, but in Python 3 we
definitely cannot pass it a string and we need to encode it into
bytes.
The Python documentation at
https://docs.python.org/3/howto/pyporting.html#text-versus-binary-data
says that this code will work in Python 2 as well.
Co-authored-by: Lloyd Parkes <lloyd@must-have-coffee.gen.nz>
Change:
- The FreeBSD release can contain -RC or -PRERELEASE in addition to
-RELEASE, -STABLE, or -CURRENT.
Test Plan:
- Added new fixed from an RC version of TrueNAS which uses a -PRERELEASE
version of FreeBSD.
Tickets:
- Fixes#72331
Signed-off-by: Rick Elrod <rick@elrod.me>
* ExecutionPolicy default value is RemoteSigned
##### SUMMARY
In Windows setup steps, settings `ExecutionPolicy` is restored to value `Restricted`. But actually default value for Windows server is not `Restricted` but `RemoteSigned` ([source](https://docs.microsoft.com/en-us/powershell/module/microsoft.powershell.core/about/about_execution_policies?view=powershell-7.1#default)).
I have got issue with `win_dsc` because `ExecutionPolicy` was `Restricted`.
##### ISSUE TYPE
- Docs Pull Request
+label: docsite_pr
* Add changelog fragment
* Apply suggestions from code review
Co-authored-by: Sandra McCann <samccann@redhat.com>
* arg_spec - move type checking lookup method to a function
* Change get_wanted_type name and behavior
Change the name to get_validator to bette describe what it is doing.
Change the interface to always return a value. This lines up with the behavior of get_*
functions always returning something or None and check_* functions raising an
Exception if something went wrong during the check.
* Add param to check_type_str()
Not meant to be a long term fix, but gets tests passing. More work is needed to figure
out how to solve this cleanly.
* Remove private attribute mapping types to validator
Since the function that needs it has moved to parameters.py, there is no need to have it as
a attribute of AnsibleModule.
Update tests that were referencing the private attribute.
* Use private method for 'str' type
To avoid having to put the string conversion warning behavior in the check_type_str() method,
use the private _check_type_str() method for 'str' type.
Import CHECK_ARGUMENT_TYPES_DISPATCHER for backwards compalitibility and store it as
a private attribute.
Revert changes to support plugins that are referencing serf._CHECK_ARGUMENT_TYPES_DISPATCHER.
* Add changelog
* Change function name to better reflect its... function
* Change dict name to better reflect its contents
CHECK_ARGUMENT_TYPES_DISPATCHER --> DEFAULT_TYPE_VALIDATORS
* Fix changelog
* systemd - do not overwrite unit name when searching
PR #72702 introduced a bug that changed the unit name when splitting it up for the purpose
of searching for the unit. This only happens on unit file templates on systems that have a 5.8
or newer kernel and a version of systemd that does not contain a bugfix that causes systmed
to fail to parse dbus.
* Use facts rather than a manual probe to determine if systmed is present
* Remov unnecessary block
* Use vars files instead of set_fact
* Add tests for using a templated unit file
* Update changelog fragment
* Use template to get correct path to sleep binary
* import_playbook - change additional params to deprecation
I incorrectly recommended this be set as a warning when it should have been a deprecation.
* Fix deprecation sanity test to not required a collection name when not inside a collection
Also pin virtualenv to 16.7.10 for older Mac OS X systems. This was the version being installed
anway with the previous constraint (<20).
On systems with Python 3, now prefer venv over virtualenv. Test to see if venv is functional since
some systems have a non-functional venv installation (such as Debian).
* Update yum/dnf module docs to include version comp
Fixes#61234
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix up docs syntax to sanity tests are happy
Signed-off-by: Adam Miller <admiller@redhat.com>
* ansible-galaxy collection list and verify now utilize collections in site-packages.
This is a short term fix for #70147. The long term fix needs to handle
install (but that discussion is also bound up in how upgrade is going to
work and where things can get installed so it's deferred for 2.11.)
* Add test for ansible-galaxy collection list with site-packages
* Fix sanity issue
Co-authored-by: David Moreau Simard <moi@dmsimard.com>
Co-authored-by: Jordan Borean <jborean93@gmail.com>
On python3 sys.stdin is an encoded file object that does not support
reading raw binary data. Use the supplied buffer object to do so.
Signed-off-by: Sven Wegener <sven.wegener@inovex.de>
Co-authored-by: Sven Wegener <sven.wegener@inovex.de>
This should allow users to extract specific files from an archive as
desired.
Fixes#16130, #27081.
* Rebase and make a few minor changes
* Add changelog
* Improve tests
- move to separate tasks file
- change assertions to check for exactly one file
- use remote_tmp_dir for output dir
* Make exclude and include mutually exclusive
* Don't remove files needed by other tasks
* Fix sanity tests
* Improve feature documentation
* Skip tests that use map() on CentOS 6
* Use fnmatch on include for zip archives
This matches the behavior of exclude
Co-authored-by: Sam Doran <sdoran@redhat.com>
* Remove space before comma in '... bla , use ...'
* 'why' is inserted in the middle of a sentence, between two commas.
* Make deprecations from base.yml show source ansible-core.
* Add changelog fragment.
* Improve some more 'why's.
* Add PR URL to fragment.
* file: add symlink is in a sticky directory tests
* file: handle symlink in a sticky directory
Co-Authored-By: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* Add changelog and fix unit test
The builtins import was removed since it was unused, but it is now needed.
The recently released version of cffi fails to install on systems with an older version of gcc. In
our case, this in the CentOS 6 test image. There is a fix but it has not yet been released.
https://foss.heptapod.net/pypy/cffi/-/issues/480
* Move _syslog_facitily to __init__
No good reason it should not be set for each object
* Move internal property setting to private method
* Create check_arguments() function
* Remove unused import
* Rename function to better match its behavior
Change the behavior to return a set, either empty or populated, with unsupported keys.
Accept legal_inputs as optional which will not required calling handle_aliases before calling
get_unsupported_parameters().
* Add changelog
* Rework function behavior and documentation
I realized I missed the original intent of this method when moving it to a function. It
is meant to compared the parameter keys to legal inputs always, not compare
parameter keys to argument spec keys, even though the argument spec keys should
be a subset of legal inputs.
* Add tests
* Fix typo.
* Set internal properties when handling suboptions
We could not find reason for the docutils install so trying out removing it.
Also bumping to latest version of ansible-runner
Skip all python2 versions because next ansible-runner drops it
Co-authored-by: Elijah DeLee <kdelee@redhat.com>
Change:
- Initial set of changes for renaming to ansible-core
- Includes changelog fragment changes from base -> core
- Does NOT include docs changes
- Modifies detection stuff in setup.py to support ansible<2.9 and ansible-base
Test Plan:
- ci_complete
* Fix super annoying Python 2.6 multiprocessing.Queue stack trace in CI
A bug exists in Python 2.6 that sometimes raises an exception during interpreter shutdown. We
encounter this frequently in our CI since we run tests on CentOS 6 as the control node, which
has Python 2.6.6 with this bug.
This PR adds a very minor sleep only on Python 2.6 which gets around this issue. I did lot of testing
using a standalon script I found that easily duplicated the issue to find the minimum sleep value
needed to avoid this issue.
CPython issue: https://bugs.python.org/issue4106
Fix in CPython: https://hg.python.org/cpython/rev/d316315a8781
* Use correct attribute
* Consolidate logic for determining whether or not session is interactive
into a single function, is_interactive()
* Increase test coverage
I wasn't able to find a good way of simulating running a backgrounded test with CI since the
whole test is essentially run not in a TTY, which is similar enough to cause the new is_interactive()
function to always return false.
* add return documentation for unarchive, add fragment for changelog, apply suggestions from code review
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Added caching mechanism for Galaxy API requests
* Add cache options and split up code
* Added unit tests
* Fix sanity test
* Use modified date and fix up caching for explicit servers
* Make sure credentials are not in cached server name
* Added test for getting updated cache version
* Changes from review
Change:
- Bump default, ansible-base, distro containers
- We do NOT add fedora33 yet, because it doesn't work right on Shippable
due to an old kernel. This will be added post-AZP.
Test Plan:
- CI
Signed-off-by: Rick Elrod <rick@elrod.me>
* Reorder comment postition
* Add comment unit test
* Fix unit test
* Fix unit test
* Add changelog
* Add paramaters which would be problematic without this fix
* Fix typo
* Fix unit test
* Fix unit test
* Emit warning when running on the controller with a Python older than 3.8
* Add spaces
Co-authored-by: Matt Clay <matt@mystile.com>
* and more spaces
Co-authored-by: Matt Clay <matt@mystile.com>
* s/Py/Python/
Co-authored-by: Matt Clay <matt@mystile.com>
* Add note to Control node requirements about Py3.8 requirement
* Add collection_name to deprecated call
* more spaces
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* Clarify that we are only packaging for py3.8+
Co-authored-by: Matt Clay <matt@mystile.com>
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* Fix 'role_name : tast_name' notation if task contains role name
* Add tests for notifying handler names which contain the role name
Co-authored-by: Thomas Wouters <thomaswouters@gmail.com>
* Support docker and k8s action groups for moved modules in community.docker and community.kubevirt.
* Also support k8s action group for community.okd.
* Also add kubernetes.core.
* Adjust PR #.
* Fix changelog fragment.
* Remove community.okd.
* Revert "Remove community.okd."
This reverts commit 812b5aa6e2.
* ansible-doc: export has_action when --json is used.
* Remove docuri and now_data, which were not used resp. ignored in format_plugin_doc and the functions it calls anyway.
* Add function _combine_plugin_doc.
* added timeout options to adhoc and console
* added test
* fix typosesz
* fix conflict
* task_timeout
* fix timeout option, added extra vars to console
* actually use right cli switch .. DUH!
* added timeout to include 'valid' but ignored keys
* fix default
* fixes per review
* Add DarwinStrategy class and integration tests
macOS has three seprate hostname params that need to be set. One of those params, LocalHostName, has more stringent requirements than the other two, which accept special characters and spaces. Create a method to scrub the hostname to ensure it works well with the system requirements.
* Update documentation
* Account for virtualization type returned on Azure Pipelines
* Do not be dependent on order of self.name_types
Use the scrubbed name when the name type is LocalHostName
A bug existed in systemd 245 that did not properly handle unknown kernel
capabilities gracefully. This resulted in incomplete output when querying
for the service status. It is possible to get service status by other means.
This PR works around this issue by getting service status using other commands
in the event of a failure due to this bug.
Change:
- Cryptography 3.2 drops support for OpenSSL 1.0.2. Some of our CI
infrastructure still uses this version (FreeBSD, namely). For now,
just add a constraint to use old cryptography.
Test Plan:
- CI
Signed-off-by: Rick Elrod <rick@elrod.me>
* GitHub is removing the underlying API used to implement the `login` command. Since the general consensus seems to be that relatively nobody currently uses this command (in favor of explicit token passing), support was simply removed for interactive login. If a future need arises, this command should be reimplemented via OAuth Device Auth Grants.
* login or role login commands now produce a fatal error with a descriptive message
* updated 2.10 and 2.11 porting guide entries
* remove dead code/config, update messages and porting guides
* Fix ansible-test docker container detection.
* Attach test containers to the correct network.
* Do not assume `localhost` for accesing Docker.
* Look for containers on current network.
* Always map /var/run/docker.sock into containers.
This fixes issues when using a remote Docker host.
* Support container IP lookup from networks list.
* Fix container network attachment.
* Remove redundant container detection messages.
* Limit DOCKER_HOST parsing to TCP.
* Restore docker socket existence check.
The check is skipped if the docker hostname is not localhost.
* Correct changelog entry.
* Fix the reversed order of return values
AnsibleModule.run_command returns a tuple of return code, stdout and stderr.
The module main function of the user module expects user.create_user to
return a tuple of return code, stdout and stderr.
Fix the locations where stdout and stderr got reversed.
* Fix another missed occurance
* Add changelog
* Fix further reversed order of return values occurrences
Followup to 72c3ba62c8e2606a6a35d51075fba29ce5faf34e:
Fix further reversed order of return values occurrences.
Change:
- containerd is now recognized as container tech
Test Plan:
- Tested with Docker inside Github Actions in a private repo:
"ansible_virtualization_role": "guest",
"ansible_virtualization_tech_guest": [
"containerd",
"container",
"VirtualPC"
],
"ansible_virtualization_tech_host": [],
"ansible_virtualization_type": "containerd",
Tickets:
- Fixes#66304 because this is what docker containers show up as
in Github Actions.
Signed-off-by: Rick Elrod <rick@elrod.me>
* Ensure we call action_loader.get with collection_list. Fixes#72170
* Add tests and changelog
* Remove grep, do assertion in playbook. ci_complete
* Skip old jinja2 versions
* ci_complete
* dedupe
make collections whitelist follow normal flow
* fixes missing set_options call and adhoc and stdout processing rules
* avoid dupes
* fixed to handle redirects
* also updated tests with new and more accurate skip message
* fix callback tests for envs with cowsay installed
* lots MOAR comments on why the code is as it is, some todos to refactor in future
Co-authored-by: Matt Davis <nitzmahone@users.noreply.github.com>
Change:
- When a plugin defines `type: str` on a parameter, treat more kinds of
input as a string instead of whatever it is parsed as.
Test Plan:
- New unit tests
- CI
Signed-off-by: Rick Elrod <rick@elrod.me>
* Add support for GSSAPI/Kerberos to urls.py
* Test out changes with the latest test container
* Get remote hosts working
* Fix up httptester_krb5_password reader
* Fix tests for opensuse and macOS
* Hopefully last lot of testing changes
* Dont do CBT on macOS
* Fixes from review
Change:
- No longer fail due to old Fedora/RHEL and our failure to try to cast
gids to integers before trying to pass them to getgrgid() before
trying to use them.
- Add tests for user/mode for various unarchive formats.
Test Plan:
- New integration tests, ran against centos6 container
Tickets:
- Fixes#71903
Change:
- Make KubeVirt be identified as such, and with a guest role.
- This is a breaking change, since playbooks could be relying on the
incorrect behavior previously.
Test Plan:
- Issue author
Tickets:
- Fixes#72001
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- podman > 2 && < 2.2 does not support "images --format {{json .}}"
- podman also now outputs images JSON differently than docker
- Work around both of the above.
Test Plan:
- Tested with podman 2.0.6 in Fedora 31.
Signed-off-by: Rick Elrod <rick@elrod.me>
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
Change:
- Use `sysctl -n` for openbsd uptime information
- Allow `get_sysctl()` to account for multi-line sysctl settings
- Add unit tests for `get_sysctl()`
Test Plan:
- New unit tests
Tickets:
- Fixes#71968
- Refs #72025
- Refs #72067
Signed-off-by: Rick Elrod <rick@elrod.me>
Co-authored-by: Brian Coca <brian.coca+git@gmail.com>
Co-authored-by: Brian Coca <bcoca@ansible.com>
The luseradd / lusermod commands do not support the -e option. Set
the expiry time in this case via lchage after the user was
created / modified.
Fixes: #71942
In Python3 math.floor returns an integer whereas Python2 returns a float.
Hence always convert the result of math.floor to an int to ensure that
lexpires is an integer.
Move local expires tests in a separate file and import the tasks to the
main.yml to keep main.yml smaller.
b6b238a fixed the SLES4SAP detection, which was at this time ok.
Sadly Suse changed with SLES 15 the /etc/os-release file, so the above
change will no longer work.
This commit updates the SLES4SAP detection regarding
https://www.suse.com/support/kb/doc/?id=000019341.
The symlink realpath is matched with endswith, because in SLES 12+ the
link target is SLES_SAP.prod, but in SLES 11 the link target is
SUSE_SLES_SAP.prod.
* Validate removal versions.
* Validate that removal collection versions and version_added collection versions conform to semver spec.
* Validate removal version numbers in meta/runtime.yml.
* Stricter validation for isodates (f.ex. YYYY-M-D is not allowed).
* Improve error reporting.
* Validate removal collection versions.
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Let get_file_attributes() work without `lsattr -v`
Change:
- module_utils's get_file_attributes() expects `lsattr -v` to work, but
in some cases, it may not.
- The function now takes an optional include_version bool parameter,
which removes this expectation.
- Places where we call get_file_attributes() without using the 'version'
it returns, we now call it with include_version=False.
Test Plan:
- New unit tests
Signed-off-by: Rick Elrod <rick@elrod.me>
* Reorder test/sanity/ignore.txt to better see changes
* Remove extra empty line causing pass fail
* Apply suggestions made by Akasurde
* Minor fix in package_facts and remove two unnecessary ignores
* Fix subversion based on a suggestion made by felixfontein
* Apply suggestions made by felixfontein and Andersson007
* Fix subversion.py as suggested by felixfontein
* Minor reformatting in yum_repository description
* Reformat changelog
* Add key to apt_key, add deprecated changelog
* Add PR url to changelog
* Ignore paramater-type-not-in-doc in favour of adding key back to apt_key
* Fix apt_key
* Remove undocumented-paramater from apt_key ignore
* Ignore doc-choices-do-not-match-spec in package_facts
* Fix package_facts
* Fix filter option in setup module
Change:
- In some cases (always with free strategy, sometimes with linear), the
default callback would not show the task banner for include_tasks.
- This only affects the include_tasks task itself, not the tasks in the
included file.
Test Plan:
- Updated default callback tests
Tickets:
- Fixes#71277
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Previously when `security: true` and `bugfix: true` were both given,
only security updates would get applied. Filters now accumulate so
that both get applied in this case.
Test Plan:
- New integration tests for both check_mode and not. These tests make
use of a contrived yum repository which is stored in S3.
Tickets:
- Fixes#70854
Signed-off-by: Rick Elrod <rick@elrod.me>
Co-authored-by: Matt Martz <matt@sivel.net>
Co-authored-by: Matt Martz <matt@sivel.net>
* fix coverage output from synthetic packages
* synthetic packages (eg, implicit collection packages without `__init__.py`) were always created at runtime with empty string source, which was compiled to a code object and exec'd during the package load. When run with code coverage, it created a bogus coverage entry (since the `__synthetic__`-suffixed `__file__` entry didn't exist on disk).
* modified collection loader `get_code` to preserve the distinction between `None` (eg synthetic package) and empty string (eg empty `__init__.py`) values from `get_source`, and to return `None` when the source is `None`. This allows the package loader to skip `exec`ing things that truly have no source file on disk, thus not creating bogus coverage entries, while preserving behavior and coverage reporting for empty package inits that actually exist.
* add unit test
On some systems (tested with official Debian Buster-based Python 3.6
docker image), setting the LC_ALL environment variable to en_US.UTF-8
will trigger Python into switching its preferred encoding to ASCII.
If any python process tries to read a non-ASCII file in this scenario,
it will terminate with an error.
And this is exactly what happens to pytest when it tries to load its
configuration that ansible-test supplies because the configuration
contains an em dash.
In order to bypass this issue, we replaced the em dash with a regular
dash and things started working again.
An alternative solution would be to replace the en_US.UTF-8 locale with
something safer, but unfortunately, the en_US.UTF-8 is probably as safe
as it gets.
The setup module can now filter out multiple pattern by providing a list
to the filter parameter instead of just a string. Single string sill
works. Previous behaviour remains.
(cherry picked from commit b5c36dac483fdd74d6c570d77cc8f3e396720366)
* Use InventoryManager for inventory_hostnames lookup. Fixes#17268
* Add test for using patterns
* s/it's/its/
* Allow bypassing parse_sources in InventoryManager
* Remove unneeded method call
Change:
- By default the dnf API does not gpg-verify packages. This is a feature
that is executed in its CLI code. It never made it into Ansible's
usage of the API, so packages were previously not verified.
- This fixes CVE-2020-14365.
Test Plan:
- New integration tests
Signed-off-by: Rick Elrod <rick@elrod.me>
* Validate salt when using crypt. Respect salt_size in password lookup. Repair salt for bcrypt. Fixes#71107. Fixes#53750. Fixes#36129.
* Handle algorithms we don't know about, and make sure to return the salt
* Account for old passlib
* Add tests for salt constraints
* Add changelog fragment
* Add test for #36129
* added configurable dir for tree callback
- allows usage in playbooks
- also made errors more specific if bad dir is supplied
- ensure we expand paths
* docfix
Change:
- Now sends meta tasks to the task start callback
- Lets callback plugins opt-in to receiving implicit tasks
Test Plan:
- New integration tests
Tickets:
- Indirectly fixes#71007 by allowing custom callbacks with this data
Signed-off-by: Rick Elrod <rick@elrod.me>
skip_missing parameter in subelements lookup plugin is accepted from
inside the dictionary.
Fixes: #38182
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* check run state of current block only
* Add changelog and test
* Add test for issue 29047
* Fix for both tests
* blerg
* Change test messages
* fix tests
* Add multi-level block in rescue test case
* Add recursive rescue check and multi-level test
* Should probably run the new test
* ci_complete
* Merge new tests
* ci_complete
* Don't do conflict check on sdist and egg_info. Fixes#71279
* Add changelog
* adjust changelog PR link
Co-authored-by: Rick Elrod <rick@elrod.me>
* add warning about bdist_wheel
Co-authored-by: Rick Elrod <rick@elrod.me>
This would be a partial solution for #69364 in that the SHASUMS file can be downloaded and gpg verified but then used from the downloaded location to verify the get_url's file.
* Make checksum url parsing more explicit
Use urlsplit to test if the checksum string has a (currently tested and) supported url scheme.
* Fix whitespace
* Changelog fragment
* Added tests
* Fix typo in test setup
The message generated by systemctl has been updated in 9321e23c40, which requires a corresponding change in the systemd module.
In addition, this fixes the module when the SYSTEMD_OFFLINE environment variable is set.
* POC for supporting callback events that come from the worker
* linting fixes. ci_complete
* fix up units. ci_complete
* Try moving the sentinel put higher. ci_complete
* safeguards. ci_complete
* Move queue killing to terminate
* LINTING. ci_complete
* Subclass Queue, to add helper send_callback method
* Just use _final_q instead of adding another queue and thread
* Revert a few changes
* Add helper for inserting a TaskResult into the _final_q
* Add changelog fragment
* Address rebase issue
* ci_complete
* Add test to assert async poll callback from fork
* Don't use full path
* ci_complete
* Use _results_lock as a context manager
* Add new generic lock decorator, and use it with send_callback
* Revert "Change default file permissions so they are not world readable (#70221)"
This reverts commit 5260527c4a.
* Revert "Fix warning for new default permissions when mode is not specified (#70976)"
This reverts commit dc79528cc6.
* Ensure -k is set to delegated hosts without a pass
* Fix up some broken tests
* Update task_executor.py
one possible fix, the other is updating winrm to normalize on 'password' like the other connection plugins
* Add alias for winrm and fix incorrect assumption
* Make sure aliases are used for keyword options
* Conditionally run test if sshpass is present, fix sanity
Co-authored-by: Brian Coca <bcoca@users.noreply.github.com>
Change:
- Allow systems to declare multiple virt techs. For example if a system
is both a docker container, but virtualized on KVM, show both. If a
system is set up to run virtualbox and KVM VMs, show both.
- This is done by introducing new facts keys:
- virtualization_tech_guest
- virtualization_tech_host
- Backwards compatibility is preserved by keeping track of the previous
return-points and refusing to update those keys after we would have
returned, but now returning them at the end, so that the new keys can
accumulate their data.
Test Plan:
- Local
- CI
Tickets:
- Refs #66304
- Refs #17151
- Refs #17058
- Probably others
Signed-off-by: Rick Elrod <rick@elrod.me>
* Fix tty_ify bugs and refactor
* Move tty_ify() and supporting attributes to the DocCLI class as that's
the only thing using it.
* Add unittest for the code.
* Fix a bug where the substitution macros can be detected when they are
a part of another word.
* Add support for L(), R(), and HORIZONTALLINE which were added to the
website docs many years ago.
* Update test/units/cli/test_doc.py
Co-authored-by: Matt Clay <matt@mystile.com>
Co-authored-by: Matt Clay <matt@mystile.com>
* add jinja2 global to reserved names
also allow expansion by additional context provided from caller
fixes#41955
Co-authored-by: Abhijeet Kasurde <akasurde@redhat.com>
Change:
- Use `chmod +a` in the fallback chain to allow MacOS to use ACLs to
allow an unprivileged user to become an unprivileged user.
Test Plan:
- CI, new tests
Tickets:
- Fixes#70648
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Add a parameter `read_whole_file` which allows for reading the whole
file when doing a `contains` regex search.
- This allows for (for example) matching a pattern at the very end of
a file.
Test Plan:
- New integration tests
Tickets:
- Fixes#63378
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Previously CachePluginAdjudicator#flush only removed entries from the
cache backend that it knew about by using them earlier. Now it calls
the underlying plugin's flush() method.
Test Plan:
- New unit tests
Tickets:
- Fixes#68770
Signed-off-by: Rick Elrod <rick@elrod.me>
* Strip spaces in module names in explicit actions
Change:
- When an action is called like "action: copy foo=bar", strip spaces
around the action name.
- This allows "action: copy foo=bar" to work as expected.
Test Plan:
- New integration tests
Tickets:
- Fixes#62136
Signed-off-by: Rick Elrod <rick@elrod.me>
Add integration tests for unarchiving as unprivileged user
Break tasks into separate files for easier reading and maintenance
Create a user by specifying a default group of 'staff' for macOS.
The user module does not actually remove the user directory on macOS,
so explicitly remove it.
Put the removal tasks in an always block to ensure they always run
Co-authored-by: Philip Douglass <philip.douglass@amadeus.com>
Co-authored-by: Sam Doran <sdoran@redhat.com>
The iso8601_micro and iso8601 facts incorrectly called now.utcnow(), resulting
in a new timestamp at the time it was called, not a conversion of the previously
stored timestamp.
Correct this by capturing the UTC timestamp once then calculating the local
time using the UTC offset of the current system.
* Use time.time() for getting the current time
* Convert from that stored epoch timestamp to local and UTC times
* Used existing timestamp for epoch time
* Add unit tests that validate the formate of the return value rather than an exact value since mocking time and timezone is non-trivial
Follow up to #70221
Related to #67794
CVE-2020-1736
When set_mode_if_different() is called with mode of 'None', ensure we issue
a warning about the change in default permissions.
Add integration tests to ensure the warning works properly.
* Fix tests
- actually use custom module 🤦♂️
- verify file permission on created files
- use remote_tmp_dir so we're ready for split controller
- improve test module so we can skip the call to set_fs_attributes_if_different()
- fix tests for CentOS 6
Change:
- Allow older git to verify tags again
- Enable verification tests everywhere, even if most of them only work
on newer git. Some of them work on older git and they test the --raw
parameter.
Test Plan:
- Re-enabled subset of git tests
Tickets:
- Fixes#64469
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Previously, we only showed that something would have changed, not what
would have changed. This allows us to show what will chang as well.
Test Plan:
- Local RHEL8 VM
- New integration tests
Tickets:
- Fixes#66132
Signed-off-by: Rick Elrod <rick@elrod.me>
* Also validate top-level version_added.
* Fix error code.
* Produce same version_added validation error in schema than in code (and stop returning it twice).
* Return correct error codes for invalid version_added for options and return values.
* Add changelog.
* Fix forgotten closing braket.
* Accept 'historical' for some top-level version_added.
* dnf: Add nobest option
* dnf: Fix indent, add nobest specifically to dnf not yum
* Add changelog for dnf: add nobest option
* dnf: Add nobest to yumdnf module argument_spec
* dnf: remove nobest from module paramaters in yumdnf.py
* dnf: Add test for nobest option
* dnf: Cleanup packages in nobest test at last
* dnf: Cleanup manually added repos in nobest test at last
* dnf: Remove dnf-plugins-core as well in nobest test
* dnf: Change nobest release version to 2.11
* Change changelog number according to change in PR number
* Change changelog number according to change in PR number
Change:
- On Linux, there are situations where a host might be a KVM host but
not have the kernel module enabled (it might be compiled in instead).
In these cases, /dev/kvm will still exist, and rather than reporting
NA, we should report that the host is a KVM host.
Test Plan:
- Local
Signed-off-by: Rick Elrod <rick@elrod.me>
* Change default file permissions so they are not world readable
CVE-2020-1736
Set the default permissions for files we create with atomic_move() to 0o0660. Track
which files we create that did not exist and warn if the module supports 'mode'
and it was not specified and the module did not call set_mode_if_different(). This allows the user to take action and specify a mode rather than using the defaults.
A code audit is needed to find all instances of modules that call atomic_move()
but do not call set_mode_if_different(). The findings need to be documented in
a changelog since we are not warning. Warning in those instances would be frustrating
to the user since they have no way to change the module code.
- use a set for storing list of created files
- just check the argument spac and params rather than using another property
- improve the warning message to include the default permissions
* ensure hostvars are available on delegation
* also inventory_hostname must point to current host and not delegated one
* fix get_connection since it was still mixing original host vars and delegated ones
* also return connection vars for delegation and non delegation alike
* add test to ensure we have expected usage when directly assigning for non delegated host
Some platform such as ESXi does not implement EpollSelector,
which is selected by DefaultSelector. Use SelectSelector which is
based upon 'select' implementation. This works perfectly with
a platform like VMware ESXi.
Fixes: #70238
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Encode/Decode files in UTF-8
* Use helper function in ansible
* Add an integration test
* Use emoji in test data.
* add changelog
* Also support non-ascii chars in filepath and add tests about this.
* Also use non-ascii chars in replaced text and ensure not to break cron syntax.
* rename self.existing to self.n_existing
* rename crontab.existing to crontab.n_existing
Change:
- Refactoring to make it harder to get wrong and easier to read.
- Generalize become_unprivileged tests and fix some that never worked
but also never failed.
Test Plan:
- CI, new units/integration tests
Signed-off-by: Rick Elrod <rick@elrod.me>
* Fix missing quoting for remote_tmp in second mkdir of shell module. Issue #69577
* adding changelog
* fixing typo in changelog entry
* adding test case
Adding test case written by bmillemayhias.
* using $HOME instead of ~
* fixing commit measage
* Update 69578-shell-remote_tmp-quoting.yaml
Co-authored-by: Brian Kohles <me@briankohles.com>
debconf module exposes sensitive information to logs, console.
Add a note to user about using no_log=True to hide such
information from console.
Fixes: #32386
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
A couple of years ago Slackware -current began using a plus (“+”) at the end of the distribution version string to indicate a future version work-in-progress.
Rearrange distribution_files unit tests to easily support more tests
- add conftest with common fixtures
- use parametrize for testing multiple scenarios
* Add changelog
* Add unit tests for Slackware distribution parsing
* Use correct fixtures for Slackware
Data comes from /etc/slackware-version
Co-authored-by: Sam Doran <sdoran@redhat.com>
Co-authored-by: <Eduard Rozenberg <eduardr@pobox.com>>
A recent updated to psutil, which is a dependency of ansible-runner, fails
to install on older versions of pip.
Commit with the breaking change:
135628639b
pipe lookup plugin uses Popen with shell=True intentionally.
This is considered a security issue if user input is not validated.
Updated docs to reflect this information for the user. Also, added
Bandit B602 documentation link for further reading.
Fixes: #70159
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Change:
- Add integration tests for various cases
- Fix wrong use of "its" in an exception thrown in varnames when it
throws an AnsibleError, given a term of the wrong type.
Test Plan:
- new tests, CI
Tickets:
- Fixes#70546
Signed-off-by: Rick Elrod <rick@elrod.me>
- ensure we preserve the typeerror part of the exception so loop defereed error handling
can postpone those caused by undefined variables until the when check is done.
- fix tests to comply with the 'new normal'
- human_to_bytes and others can issue TypeError not only on 'non string'
but also bad string that is not convertable.
Co-authored-by: Sloane Hertel <shertel@redhat.com>
Co-authored-by: Sloane Hertel <shertel@redhat.com>
Change:
- Use parse_kv() for parsing in the csvfile lookup plugin. This allows
us to handle multi-word search keys and filenames. Previously, the
plugin split on space and so none of these things worked as expected.
- Add integration tests for csvfile, testing a plethora of weird cases.
Test Plan:
- New integration tests, CI
Tickets:
- Fixes#70545
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Followup to #70504. We need to not pass the 'warn' parameter from the
action plugin either, unless it's True. Otherwise, even though it
defaults to false, we always show the deprecation.
Test Plan:
- Local
Signed-off-by: Rick Elrod <rick@elrod.me>
* speed up modify_module
* Remove debugging
* ci_complete
* Simplify generic_visit, alias to visit, eliminate some attr lookups
* ci_complete
* Add changelog fragment
* Fix ansible-test error in community.aws
* Add changelog entry for fix
* Change check from None to string_types
* Update changelogs/fragments/70507-validate-null-author.yaml
clarify wording "or a list of strings"
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update test/lib/ansible_test/_data/sanity/validate-modules/validate_modules/schema.py
clarify wording - single string or not specified valid
Co-authored-by: Felix Fontein <felix@fontein.de>
* Do not fail but return None when given outside list
Co-authored-by: Felix Fontein <felix@fontein.de>
Change:
- The command warnings feature which suggests that users use modules
instead of certain commands is now deprecated. Its `warn` paramater
and `COMMAND_WARNINGS` configuration options are also deprecated.
Their use will become an error in version 2.13.
Test Plan:
- CI
Signed-off-by: Rick Elrod <rick@elrod.me>
Co-authored-by: Sam Doran <sdoran@redhat.com>
Change:
Our handling of NetBSD virtualization facts led to facts that were just
plain incorrect. One example is reporting Xen even when the system is
running on something completely different (like KVM).
As stated by the reporter of #69352, NetBSD has a better sysctl setting
to use for this information, machdep.hypervisor.
This PR does the following:
- Try to use machdep.hypervisor sysctl value if the other sysctl values
we check don't end up with enough information to be useful
- Only look for /dev/xencons and assume Xen if nothing else works
(Really this should probably return 'unknown' since the file exists on
non-Xen systems and is not very useful).
- Add a few more patterns (Xen matches and also Hyper-V) to
VirtualSysctlDetectionMixin#detect_virt_product.
This change is slightly breaking:
- If the first two attempts at using sysctl worked before,
(machdep.dmi.system-product and machdep.dmi.system-vendor), they will
continue to work.
- For cases when those values didn't work, previously the existence of
/dev/xencons was checked, and if found, we reported 'xen' (even on
non-Xen systems when the file existed). After this PR, we try the
machdep.hypervisor sysctl key before still falling back to
/dev/xencons. This means that in some cases, we might go from
(wrongly) saying "xen" to giving a more accurate value such as "kvm"
or "Hyper-V".
Test Plan:
- Tested with local NetBSD VM and got 'kvm' instead of 'xen' back.
Tickets:
- Fixes#69352
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- module_utils.basic.is_special_selinux_path() used a string ==
bytestring comparison which returned False and made Ansible think that
certain filesystems aren't, in fact, special-cased, when they should
be. Ensure both sides of the == are bytestrings.
Test Plan:
- Added `copy` integration tests for this case.
Tickets:
- Fixes#70244
Signed-off-by: Rick Elrod <rick@elrod.me>
* ansible-doc man formatter: do not crash when description isn't there.
* Change to report a better error message when description is not there.
* Add test.
When user uses home directory in --playbook-dir option
of ansible-inventory command, it warns user about this.
This PR suppress the warning message for user's home directory usage
in ansible-inventory command.
Fixes: #65262
Signed-off-by: Satyajit Bulage <sbulage@redhat.com>
The ssh_args were sometimes not correctly applied to the connection
when using _play_context. Use get_option() instead to ensure the
correct ssh_args are always applied.
* Use the first galaxy server supporting v1 for roles. Fixes#65440
* Add changelog fragment
* This is best effort, fall back to original behavior if something bad happens
* misc collection metadata fixes
* parse collection meta with libyaml if available
* require only Mapping for validation
* add explanatory text for _meta_yml_to_dict
* ignore custom pylint rule
* this code shouldn't import a bunch of stuff from ansible, since it's run under the import sanity test
Change:
- In certain situations, such as when the input string contains null
bytes (\0), syslog.syslog will throw a TypeError. Handle that and
fail_json instead.
Test Plan:
- New test
- ansible-test --docker centos[68] (for py2 and py3 respectively)
Tickets:
- Refs #70269
Signed-off-by: Rick Elrod <rick@elrod.me>
* ansible-test - do not validate blacklisted ps modules
* Update changelogs/fragments/validate-modules-ps-doc-blacklist.yaml
Co-authored-by: Matt Clay <matt@mystile.com>
Co-authored-by: Matt Clay <matt@mystile.com>
* Ensure not to remove existing packages while installing apt packages.
* Make all lines shorter than 160 characters
* Allow removing packages only when upgrading.
* Add integration tests
In some usecases, we want to be able to clone a single branch
of a repository, without using --depth (which implies --single-branch).
* Use branch name when available
- update description of parameter
- consolidate branch or tag checking for easy reuse
* Add changelog
* Use static task imports rather than dynamic includes
* Add integration tests for single_branch
* Account for older versions of git
* Minor tweak to warnings
Co-authored-by: Laurent Coustet <laurent.coustet@clarisys.fr>
Co-authored-by: Sam Doran <sdoran@redhat.com>
* [Bugfix] curses.setupterm() error
When run playbook in celery task, curses.setupterm() will be failed
```
File "<frozen importlib._bootstrap>", line 675, in _load
File "<frozen importlib._bootstrap>", line 655, in _load_unlocked
File "<frozen importlib._bootstrap_external>", line 678, in exec_module
File "<frozen importlib._bootstrap>", line 205, in _call_with_frames_removed
File "/Users/guang/.virtualenvs/ansible/lib/python3.6/site-packages/ansible/plugins/action/pause.py", line 45, in <module>
curses.setupterm()
TypeError: argument must be an int, or have a fileno() method.
```
* Add changelog
Co-authored-by: Sam Doran <sdoran@redhat.com>
Handle colon appearing in filename while parsing the mimetype and charset
using file command.
Fixes: #70256
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Change:
- On Python 3.9, `crypt.crypt` will throw instead of returning `None`
when the algorithm isn't supported. So we catch that and handle it
the same way we handled the algorithm not being supported on 3.8: by
throwing AnsibleError.
Test Plan:
- CI for <=3.8.
- Local for 3.9b3:
ansible -m debug -a "msg=\"{{ 'changeme' | password_hash('bcrypt') }}\"" localhost
Before:
localhost | FAILED! => {
"msg": "Unexpected failure during module execution.",
"stdout": ""
}
After:
localhost | FAILED! => {
"msg": "crypt.crypt does not support 'bcrypt' algorithm"
}
Tickets:
- Fixes#69930
Signed-off-by: Rick Elrod <rick@elrod.me>
The `packaging` and `pyparsing` packages are now installed by `ansible-test` during provisioning of RHEL instances to match the downstream vendored versions.
Change:
- Remove _get_item() alias as it has been deprecated
- Update tests
- Remove relevant sanity curtailment
- Add changelog
Test Plan:
CI, grep
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
Removes with_* loop squashing and tests for 2.11
Test Plan:
CI, and grepped for with_items in package manager integration targets.
There might be some test cases in collections which need to stop testing
this behavior.
Signed-off-by: Rick Elrod <rick@elrod.me>
* Clarify blockinfile docs for insertafter/insertbefore
It's not clear from the docs that these options take effect
only when no marker lines are found in the document.
* Add changelog fragment
The upcoming pyparsing 3 release will require Python 3.5 or later, see:
https://github.com/pypa/packaging/issues/313
Unfortunately pip 8.x and earlier versions do not support python version requirements, which is why this constraint is needed.
* builtin downstream vendoring support
* allows downstream packagers to install packages to `ansible/_vendor` that will automatically be added to head of sys.path during `ansible` package load
* tests
* sort conflicting package names in warning text
* sanity fixes
* skip unnecessary comparison
* Validate ansible-base & collection's runtime.yml
Add new test `runtime-metadata`
* Schema validation of file
* Error if a a legacy meta/routing.yml exist in a collection
* removal_date OR removal_version
* Add tombstone validation.
* Allow both ISO 8601 date strings and datetime.date objects (from YAML dates).
* Address review comments.
* Add metadata to test collection.
* Add requirements file.
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Matt Clay <matt@mystile.com>
* Add mccabe complexity testing
* Make mccabe complexity an optional error
* Add mccabe to new sanity pylint requirements
* Add a changelog fragment.
Co-authored-by: Matt Clay <matt@mystile.com>
When using 'remote_src: yes' and 'mode: preserve', the code handling
the file modes has to be handled on the remote node because it's
the one that has access to the source files. This means that the
copy module itself must handle this, rather than the copy action
plugin (which is where all that logic exists). The copy module
handles this when we copy a single file over. But when it is a
directory as the src parameter value, the mode of the files
beneath it are not considered. Subdirectories are copied with
shutil.copytree() which will preserve permissions automatically.
Individual files are copied with shutil.copyfile() which does NOT
preserve permissions. We need to add some calls to shutil.copymode()
to correct that.
Note: This *always* retains individial file permissions. Specifying
a 'mode' other than 'preserve' when giving a source directory for
the 'src' param does not make sense so will be ignored in that case
only.
Fixes#69783
* Add changelog and test
* config: singular ANSIBLE_COLLECTIONS_PATH
Every other *_PATH setting in ansible is singular, and the traditional
$PATH variable is also singular despite containing a list of
directories. Let's be consistent both internally and with POSIX
tradition.
* update all ANSIBLE_COLLECTIONS_PATHS env references to be singular
* deprecate plural ANSIBLE_COLLECTIONS_PATHS setting
Replace the ansible-base changelog linting and generation tool with antsibull-changelog and make it available for linting collections. Previously changelog linting was limited to ansible-base.
* Tag return value docs if they are a dict (and not str/None).
* Try to parse return docs as YAML.
* Properly dump return values in ansible-doc.
* Adjust plugin formatter.
* Add changelog fragment.
* Don't add 'default' for return values.
* Fix plugin_formatter.
* Only try to parse return docs if they are still a string.
* Add tests.
* Warn if RETURN cannot be parsed.
* Adjust tests. Also test for warning.
* if -> elif (otherwise EXAMPLE will be parsed too).
* Always parse return documentation, and fail if it is invalid YAML.
* Polishing.
* Mostly re-enable ansible-doc tests.
Listing from the local collection seems to be somewhat broken. I assume this
is why the test was disabled.
* Lint and make tests work with Python 2.
* Keep FQCNs in plugins (not modules), i.e. restore previous state.
* use security_fix category in changelogs for CVEs
* these fragments do not say CVE but are security fixes
Co-authored-by: Alicia Cozine <acozine@users.noreply.github.com>
* Support removed_at_date in ansible-doc
Signed-off-by: NilashishC <nilashishchakraborty8@gmail.com>
Changes:
* ansible-doc does not support `removed_at_date` and assumes that
deprecated dict will either have `removed_in` or `version`. This
results in ansible-doc (and hence "sanity --test=ansible-doc")
failing for modules having only `removed_at_date`.
* This patch adds support for `removed_at_date` and also gives it
precedence over `removed_in` or `version`.
* Add tests and changelog
Signed-off-by: NilashishC <nilashishchakraborty8@gmail.com>
This prevents PlayIterator having to go through empty blocks
that were created in filter_tagged_tasks. This should
be a performance improvement for playbooks that mostly skip
tasks with tags.
ci_complete
* Move ansible-test completion code.
* Fix a few type hints.
* Change docker completion based on context.
Collections now use version 2.0 of the default-test-container.
This is an updated version of the earlier 1.x default-test-container with ansible-base and cloud specific requirements removed.
Testing of ansible-base now uses version 1.0 of a new ansible-base-test-container.
This container is similar to the earlier 1.x default-test-container, but with unnecessary duplication of requirements across Python versions removed.
Collections which have tests that depend on requirements no longer present in the default test container should specify them in their test requirements files:
* tests/integration/requirements.txt
* tests/unit/requirements.txt
* Bump test container versions
Co-authored-by: Jordan Borean <jborean93@gmail.com>
* Only allow groups which were hardcoded in module_defaults.yml
only load action groups from the collection if module_defaults contains a potential group for the action
* Fix tests using modules that override those whitelisted in lib/ansible/config/module_defaults.yml
Third party modules should not be using group/ - use the action name instead
* add externalized module_defaults tests
add the missing group and collections
ci_complete
Co-authored-by: Matt Davis <mrd@redhat.com>
* changelog
ci_complete
* Fix import in tests
ci_complete
* Update with requested changes
ci_complete
* don't traceback since we don't validate the contents of module_defaults
ci_complete
Co-authored-by: Matt Davis <mrd@redhat.com>
* Allow to specify collection_name separately for deprecation.
* Use new functionality in Ansible.
* Use new functionality in tests.
* Update tagging/untagging functions.
* Update pylint deprecated sanity test.
* Update validate-modules. Missing are basic checks for version_added (validate semantic version format for collections).
* Improve version validation. Re-add version_added validation.
* Make sure collection names are added to return docs before schema validation.
* Extra checks to avoid crashes on bad data.
* Make C# module utils code work, and update/extend tests.
* Add changelog fragment.
* Stop extracting collection name from potentially tagged versions/dates.
* Simplify C# code.
* Update Windows modules docs.
* Forgot semicolons.
* Split out sanity test requirements.
* Run each --venv test separately.
This provides verification that the requirements for each test are properly specified.
* Use a separate requirements file per sanity test.
* Skip setuptools/cryptography setup for sanity.
* Eliminate pyyaml missing warning.
* Eliminate more pip noise.
* Fix conflicting generate_pip_install commands.
* Add changelog fragment.
* Make AnsibleVaultEncryptedUnicode work more like a string. Fixes#24425
* Remove debugging
* Wrap some things
* Reduce diff
* data should always result in text
* add tests
* Don't just copy and paste, kids
* Add eq and ne back
* Go full UserString copy/paste
* Various version related fixes
* Remove trailing newline
* py2v3
* Add a test that can evaluate whether a variable is vault encrypted
* map was introduces in jinja2 2.7
* moar jinja
* type fix
Co-Authored-By: Sam Doran <sdoran@redhat.com>
* Remove duplicate __hash__
* Fix typo
* Add changelog fragment
* ci_complete
Co-authored-by: Sam Doran <sdoran@redhat.com>
* Auto unroll generators produced by jinja filters
* Unroll for native in finalize
* Fix indentation
Co-authored-by: Sam Doran <sdoran@redhat.com>
* Add changelog fragment
* ci_complete
* Always unroll regardless of jinja2
* ci_complete
Co-authored-by: Sam Doran <sdoran@redhat.com>
Change:
- The `add_host` action now shows an accurate change status.
Test Plan:
- Added a plethora of integration tests.
Tickets:
Fixes#69881
Signed-off-by: Rick Elrod <rick@elrod.me>
* Use fqcr from command module invocation using shell module
Fixes https://github.com/ansible/ansible/issues/69788
Use fully qualified collection reference while invoking
command module from shell module
* Fox review comment
In the case of a free style strategy, it is possible to end up with
multiple hosts trying to include from the same role, however the tasks
being included may be different with the use of tasks_from. Previously
if you had two hosts that were included the same role when the
process_include_results function tries to determine if a included needs
to be run on a specific host, it would end up merging two different
tasks into which ever one was processed first.
This change updates the equality check to also check if the task uuid
associated with the IncludedFile is the same. The previous check only
checked if the task's parent uuid was the same. This breaks down when
both includes have the same parent.
- hosts: all
strategy: free
gather_facts: false
tasks:
- include_role:
name: random_sleep
- block:
- name: set a fact (1)
include_role:
name: set_a_fact
tasks_from: fact1.yml
- name: set a fact (2)
include_role:
name: set_a_fact
tasks_from: fact2.yml
- name: include didn't run
fail:
msg: >
set_a_fact didn't run
fact1: {{ fact1 | default('not defined')}}
fact2: {{ fact2 | default('not defined') }}"
when: (fact1 is not defined or fact2 is not defined)
Closes#69521
To avoid issues with Flatcar Container Linux being unable to be found,
detect Flatcar distro name especially for hostname, just like CoreOS
Container Linux was supported.
See also https://github.com/ansible/ansible/issues/69516
* do not return the body even if it failed
* add some tests for this and rebase
* import test task
* ignore_errors when fails
Co-authored-by: Jack Zhang <jack.zhang@aspiraconnect.com>
Change:
On OpenBSD when using pipelining, we do not set cwd which results in a
permissions fatal. Ensure that `''` - cwd - is not in `sys.path`.
Test Plan:
Tested against local OpenBSD VM
Tickets:
Fixes#69320
Signed-off-by: Rick Elrod <rick@elrod.me>
* Enable installing collections from git repositories
* Add tests for installing individual and multiple collections from git repositories
* Test to make sure recursive dependencies with different syntax are deduplicated
* Add documentation
* add a changelog
* Skip Python 2.6
* Only fail if no collections are located in a git repository
Add support for a 'type' key for collections in requirement.yml files.
Update the changelog and document the supported keys and allowed values for the type.
Add a note that the collection(s) in the repo must contain a galaxy.yml
* Add a warning about embedding credentials in SCM URLs
* Update with review suggestions
* suppress sanity compile failure for Python 2.6
* Track collection for version_added.
Validate *all* version numbers in validate-modules.
For tagged version numbers (i.e. version_added), consider source collection to chose validation.
* Make tagging/untagging functions more flexible.
* Tag all versions in doc fragments.
* Tag all deprecation versions issued by code.
* Make Display.deprecated() understand tagged versions.
* Extend validation to enforce tagged version numbers.
* Tag versions in tests.
* Lint and fix test.
* Mention collection name in collection loader's deprecation/removal messages.
* Fix error IDs.
* Handle tagged dates in Display.deprecated().
* Also require that removed_at_date and deprecated_aliases.date are tagged.
* Also automatically tag/untag removed_at_date; fix sanity module removal version check.
* Improve error message when invalid version number is used (like '2.14' in collections).
* Allow to deprecate module by date in documentation.
* Make sure deprecation date/version match between module docs and meta/runtime.yml.
* Unrelated fix: don't compare deprecated module version to Ansible's version in collection.
* Allow documentation's removal version to be something else than fixed list of Ansible versions for collections.
* Linting.
* Allow to deprecate plugin options by date.
* Add changelog fragment for deprecation by date (also covers #68177).
PR #66461 introduced a regression that resulted in an in correct block in the file
if the block to be inserted did not end with a line separator. Fix this bug and add
tests to cover this scenario.
Rick Elrod