* ansible-galaxy - support `resolvelib >= 0.5.3, < 1.1.0`
<https://pypi.org/project/resolvelib/1.0.1> released on 2023-03-09:
- <https://github.com/sarugaku/resolvelib/blob/main/CHANGELOG.rst#101-2023-03-09>
- <https://github.com/sarugaku/resolvelib/releases/tag/1.0.1>
Signed-off-by: Wong Hoi Sing Edison <hswong3i@pantarei-design.com>
* Trigger CI by pinning resolvelib with latest version
Since resolvelib is pre-installed in our test containers, we should temporarily pin the latest version allowed to force the tests to run with that version. Once the tests have passed that commit can be reverted.
Please make those changes without force pushing, so that we keep the reference to the passing CI run. We can squash the commits when merging the PR so the temporary commits won't be in the final commit merged to the devel branch.
Signed-off-by: Wong Hoi Sing Edison <hswong3i@pantarei-design.com>
* https://github.com/ansible/ansible/pull/80196#discussion_r1136003637
Also test resolvelib with multiple supported versions.
Signed-off-by: Wong Hoi Sing Edison <hswong3i@pantarei-design.com>
* Revert "Trigger CI by pinning resolvelib with latest version"
This reverts commit 5518e5dbca.
---------
Signed-off-by: Wong Hoi Sing Edison <hswong3i@pantarei-design.com>
* Pin setuptools to lowest supported @ PEP 517 test
This allows catching the behavior of builds under old setuptools.
* Stop invoking `setup.py install` in tests
This is not the part we care about since it involves dealing with the
external runtime dependencies rather than building our source
distribution.
This patch modifies the in-tree build backend to build sdists that swap
out pointers to it in the `pyproject.toml`'s `[build-system]` section.
The effect of this is that the first build from source (for example,
from a Git checkout) uses our PEP 517 in-tree build backend. But the
produced tarball has `build-backend` set to `setuptools.build_meta`
which is the native build backend of `setuptools`. So any following
builds from that sdist will skip using the in-tree build backend,
calling the setuptools' one.
The good news is that if the first build generated the manpages, they
will be included and won't go anywhere even though, a different build
system is in place.
Combined with #80253, this will make sure not to modify the current
source checkout on that first build.
Co-authored-by: Matt Clay <matt@mystile.com>
* 🧪 Switch macOS 13.2 to 12.0 in CI
The former revealed unexpected flakiness while the latter is the
previous value that was used to be stable. This is a temporary revert.
* Skip lookup_url integration test under macOS 12.0
* ✨ Add macOS 13.2 to `ansible-test`
* 🧪 Replace macOS 12.0 with 13.2 in the CI matrix
* Skip `lookup_url` under macOS 13.2
This is due to https://wefearchange.org/2018/11/forkmacos.rst.html
that manifests itself as follows:
TASK [lookup_url : Test that retrieving a url works] ***************************
objc[15394]: +[__NSCFConstantString initialize] may have been in progress in another thread when fork() was called.
objc[15394]: +[__NSCFConstantString initialize] may have been in progress in another thread when fork() was called. We cannot safely call it or ignore it in t
he fork() child process. Crashing instead. Set a breakpoint on objc_initializeAfterForkError to debug.
ERROR! A worker was found in a dead state
* 📝 Extend ansible-test change note w/ macOS 13.2
* 🐛 Make integration tests compatible w/ modern Git
This patch makes use of the `init.defaultBranch` setting to unify
the test across new and old Git versions since one defaults to
`master` and the other uses `main` for the default branch.
Where possible, it uses the `HEAD` committish to avoid having to
normalize the branch name.
The change fixes the following integration tests:
* `ansible-galaxy`
* `ansible-galaxy-collection-scm` (recursive collection)
* `git`
* 🐛Replace `git-symbolic-ref` with a repo template
This custom Git repository template emulates the `init.defaultBranch` setting
on Git versions below 2.28. Ref: https://superuser.com/a/1559582.
Other workarounds mentioned there, like invoking
`git symbolic-ref HEAD refs/heads/main` after each `git init` turned
out to have mysterious side effects that break the tests in surprising ways.
* 🎨 Make Git integration test non-destructive
This patch makes use of the `$HOME` environment variable to trick Git
into using a user-global config generated in the temporary directory.
* unarchive - properly handle relative path for dest
* Add integration test
* Return output of underlying commands with increased verbosity
* Revert "Return output of underlying commands with increased verbosity"
This reverts commit a2790c8275cdc5697b65670a0beffdc74b741bf6.
* Warn when a relative destination path was provided
* Create a queue per WorkerProcess to receive intra-task updates
* Update `pause` action to use the worker queue
* Deprecate ConnectionBase()._new_stdin
* Add new `Display` convenience method `prompt_until` to manage both controller- and worker-sourced prompting without cross-fork stdin sharing, in-worker mechanism to handle request-response over new worker queue.
This patch creates a thin wrapper around the `setuptools`' PEP 517
build backend in-tree. It features an ability to request generating
the manpage files in the process of building a source distribution.
This toggle is implemented using the `config_settings` mechanism of
PEP 517.
One must explicitly pass it a CLI option to the build front-end to
trigger said behavior. The packagers are expected to use the
following call:
python -m build --config-setting=--build-manpages
This option has no effect on building wheels.
🧪 The change includes integration tests
This test runs building and re-building sdists and wheels with and
without the `--build-manpages` config setting under the
oldest-supported and new `setuptools` pinned.
It is intended to preserve the interoperability of the packaging setup
across Python runtimes.
An extra smoke test also verifies that non PEP 517 interfaces remain functional.
PR #79606
Co-authored-by: Matt Clay <matt@mystile.com>
The previous change to the default mode of operation for the plugin is now limited to collections.
This enables easier testing of the plugin in core, so the previously removed tests have been restored.
* Add condition that causes a when to skip a task
* Fix up tests
* Use false_condition instead of failed_condition
* Remove formatting accidentially added
* Fix sanity
* ansible-inventory, add --limit option
* also graph
* optimize the when not providing limit
* added tests and clog
* avoid empty groups, fix tests
* i swear there as an ignore_errors there already!!?!?!?
* Fix stdout test fallback
Co-authored-by: Sloane Hertel <19572925+s-hertel@users.noreply.github.com>
* simpler approach using subset against inventory directly
* tyupose
* renamed funciton to what it actuall does
got yaml in line with others about removing empty groups
* have graph ignore limts, also note same for --host
* fixed typo long line
* better test
* cause hosvars are not a thing
---------
Co-authored-by: Matt Davis <6775756+nitzmahone@users.noreply.github.com>
Co-authored-by: Sloane Hertel <19572925+s-hertel@users.noreply.github.com>
* Change ansible_job_id format
...to be something that does not resemble float or other type which
value could be changed by literal_eval that jinja2_native uses.
Specifically the format of '%d.%d' is converted from str to float and
then back to float which may result in truncating the number resulting
in the job not being found because the job id does not exist.
* Fix detection of available hashlib algorithms
Detection of hashlib algorithms now works on Python 3.x.
The new implementation works on Python 2.7 and later.
Test coverage is provided by both integration and unit tests.
* Add additional details about hashlib in docs
* quiet default ansible-doc integration test output
* typical non-verbose output was exceeding 27k lines per fun
* disables `set -x` unless `-v` is passed to the script (eg when ansible-test is called with `-v` or `--retry-on-error` adds it on the second try
* added simple progress echoes
* suppress some grep output
* only enable `set -x` for >= `-vvv`
* fix shellcheck default complaint
Matt Clay