Validate EXAMPLES as YAML

lib/ansible/modules/cloud/amazon/_ec2_vpc.py

@@ -105,14 +105,14 @@ EXAMPLES = '''
 # It is assumed that their matching environment variables are set.
 
 # Basic creation example:
-      ec2_vpc:
+    - ec2_vpc:
         state: present
         cidr_block: 172.23.0.0/16
         resource_tags: { "Environment":"Development" }
         region: us-west-2
 # Full creation example with subnets and optional availability zones.
 # The absence or presence of subnets deletes or creates them respectively.
-      ec2_vpc:
+    - ec2_vpc:
         state: present
         cidr_block: 172.22.0.0/16
         resource_tags: { "Environment":"Development" }
@@ -143,12 +143,12 @@ EXAMPLES = '''
       register: vpc
 
 # Removal of a VPC by id
-      ec2_vpc:
+    - ec2_vpc:
         state: absent
         vpc_id: vpc-aaaaaaa
         region: us-west-2
-If you have added elements not managed by this module, e.g. instances, NATs, etc then
+# If you have added elements not managed by this module, e.g. instances, NATs, etc then
-the delete will fail until those dependencies are removed.
+# the delete will fail until those dependencies are removed.
 '''
 
 

lib/ansible/modules/cloud/amazon/cloudformation_facts.py

@@ -73,7 +73,7 @@ EXAMPLES = '''
 
 # Facts are published in ansible_facts['cloudformation'][<stack_name>]
 - debug:
-    msg: '{{ ansible_facts['cloudformation']['my-cloudformation-stack'] }}'
+    msg: "{{ ansible_facts['cloudformation']['my-cloudformation-stack'] }}"
 
 # Get all stack information about a stack
 - cloudformation_facts:

lib/ansible/modules/cloud/amazon/cloudfront_facts.py

@@ -145,10 +145,10 @@ EXAMPLES = '''
 
 # Facts are published in ansible_facts['cloudfront'][<distribution_name>]
 - debug:
-    msg: '{{ ansible_facts['cloudfront']['my-cloudfront-distribution-id'] }}'
+    msg: "{{ ansible_facts['cloudfront']['my-cloudfront-distribution-id'] }}"
 
 - debug:
-    msg: '{{ ansible_facts['cloudfront']['www.my-website.com'] }}'
+    msg: "{{ ansible_facts['cloudfront']['www.my-website.com'] }}"
 
 # Get all information about an invalidation for a distribution.
 - cloudfront_facts:

lib/ansible/modules/cloud/amazon/cloudtrail.py

@@ -83,7 +83,8 @@ extends_documentation_fragment: aws
 
 EXAMPLES = """
   - name: enable cloudtrail
-    local_action: cloudtrail
+    local_action:
+      module: cloudtrail
       state: enabled
       name: main
       s3_bucket_name: ourbucket
@@ -91,7 +92,8 @@ EXAMPLES = """
       region: us-east-1
 
   - name: enable cloudtrail with different configuration
-    local_action: cloudtrail
+    local_action:
+      module: cloudtrail
       state: enabled
       name: main
       s3_bucket_name: ourbucket2
@@ -99,7 +101,8 @@ EXAMPLES = """
       region: us-east-1
 
   - name: remove cloudtrail
-    local_action: cloudtrail
+    local_action:
+      module: cloudtrail
       state: disabled
       name: main
       region: us-east-1

lib/ansible/modules/cloud/amazon/ec2_asg.py

@@ -182,15 +182,15 @@ EXAMPLES = '''
 
 # Rolling ASG Updates
 
-Below is an example of how to assign a new launch config to an ASG and terminate old instances.
+# Below is an example of how to assign a new launch config to an ASG and terminate old instances.
-
+#
-All instances in "myasg" that do not have the launch configuration named "my_new_lc" will be terminated in
+# All instances in "myasg" that do not have the launch configuration named "my_new_lc" will be terminated in
-a rolling fashion with instances using the current launch configuration, "my_new_lc".
+# a rolling fashion with instances using the current launch configuration, "my_new_lc".
-
+#
-This could also be considered a rolling deploy of a pre-baked AMI.
+# This could also be considered a rolling deploy of a pre-baked AMI.
-
+#
-If this is a newly created group, the instances will not be replaced since all instances
+# If this is a newly created group, the instances will not be replaced since all instances
-will have the current launch configuration.
+# will have the current launch configuration.
 
 - name: create launch config
   ec2_lc:
@@ -213,8 +213,8 @@ will have the current launch configuration.
     desired_capacity: 5
     region: us-east-1
 
-To only replace a couple of instances instead of all of them, supply a list
+# To only replace a couple of instances instead of all of them, supply a list
-to "replace_instances":
+# to "replace_instances":
 
 - ec2_asg:
     name: myasg

lib/ansible/modules/cloud/amazon/ec2_eni.py

@@ -175,7 +175,7 @@ EXAMPLES = '''
 
 # Modify the interface to enable the delete_on_terminaton flag
 - ec2_eni:
-    eni_id: {{ "eni.interface.id" }}
+    eni_id: "{{ eni.interface.id }}"
     delete_on_termination: true
 
 '''

lib/ansible/modules/cloud/amazon/ecs_taskdefinition.py

@@ -90,7 +90,7 @@ EXAMPLES = '''
         hostPort: 80
     - name: busybox
       command:
-        - "/bin/sh -c \"while true; do echo '<html> <head> <title>Amazon ECS Sample App</title> <style>body {margin-top: 40px; background-color: #333;} </style> </head><body> <div style=color:white;text-align:center> <h1>Amazon ECS Sample App</h1> <h2>Congratulations!</h2> <p>Your application is now running on a container in Amazon ECS.</p>' > top; /bin/date > date ; echo '</div></body></html>' > bottom; cat top date bottom > /usr/local/apache2/htdocs/index.html ; sleep 1; done\""
+        - /bin/sh -c "while true; do echo '<html><head><title>Amazon ECS Sample App</title></head><body><div><h1>Amazon ECS Sample App</h1><h2>Congratulations!</h2><p>Your application is now running on a container in Amazon ECS.</p>' > top; /bin/date > date ; echo '</div></body></html>' > bottom; cat top date bottom > /usr/local/apache2/htdocs/index.html ; sleep 1; done"
       cpu: 10
       entryPoint:
       - sh

lib/ansible/modules/cloud/amazon/elasticache_subnet_group.py

@@ -54,7 +54,7 @@ extends_documentation_fragment:
 
 EXAMPLES = '''
 # Add or change a subnet group
-- elasticache_subnet_group
+- elasticache_subnet_group:
     state: present
     name: norwegian-blue
     description: My Fancy Ex Parrot Subnet Group

lib/ansible/modules/cloud/amazon/rds.py

@@ -276,7 +276,7 @@ EXAMPLES = '''
     wait: yes
 
 # Reboot an instance and wait for it to become available again
-- rds
+- rds:
     command: reboot
     instance_name: database
     wait: yes

lib/ansible/modules/cloud/amazon/redshift_subnet_group.py

@@ -67,7 +67,7 @@ EXAMPLES = '''
         - 'subnet-bbbbb'
 
 # Remove subnet group
-redshift_subnet_group: >
+- redshift_subnet_group:
     state: absent
     group_name: redshift-subnet
 '''

lib/ansible/modules/cloud/azure/azure_rm_deployment.py

@@ -163,7 +163,7 @@ EXAMPLES = '''
 
     - name: Add new instance to host group
       add_host:
-        hostname: '{{ item['ips'][0].public_ip }}'
+        hostname: "{{ item['ips'][0].public_ip }}"
         groupname: azure_vms
       with_items: "{{ azure.deployment.instances }}"
 

lib/ansible/modules/cloud/cloudstack/cs_configuration.py

@@ -91,7 +91,7 @@ EXAMPLES = '''
 
 # Ensure account configuration
 - local_action:
-    module: cs_configuration:
+    module: cs_configuration
     name: allow.public.user.templates
     value: false
     account: acme inc

lib/ansible/modules/cloud/cloudstack/cs_sshkeypair.py

@@ -84,7 +84,7 @@ EXAMPLES = '''
 # register your existing local public key:
 - cs_sshkeypair:
     name: linus@example.com
-    public_key: '{{ lookup('file', '~/.ssh/id_rsa.pub') }}'
+    public_key: "{{ lookup('file', '~/.ssh/id_rsa.pub') }}"
   delegate_to: localhost
 '''
 

lib/ansible/modules/cloud/google/gce.py

@@ -236,6 +236,7 @@ EXAMPLES = '''
       credentials_file: "/path/to/your-key.json"
       project_id: "your-project-name"
 
+---
 # Example Playbook
 - name: Compute Engine Instance Examples
   hosts: localhost

lib/ansible/modules/cloud/misc/proxmox.py

@@ -286,7 +286,7 @@ EXAMPLES = '''
 - proxmox:
     vmid: 100
     api_user: root@pam
-    api_passwordL 1q2w3e
+    api_password: 1q2w3e
     api_host: node1
     force: yes
     state: stopped

lib/ansible/modules/cloud/misc/rhevm.py

@@ -217,8 +217,7 @@ vm:
 
 EXAMPLES = '''
 # basic get info from VM
-  action: rhevm
+  - rhevm:
-  args:
       name: "demo"
       user: "{{ rhev.admin.name }}"
       password: "{{ rhev.admin.pass }}"
@@ -226,8 +225,7 @@ EXAMPLES = '''
       state: "info"
 
 # basic create example from image
-  action: rhevm
+  - rhevm:
-  args:
       name: "demo"
       user: "{{ rhev.admin.name }}"
       password: "{{ rhev.admin.pass }}"
@@ -237,8 +235,7 @@ EXAMPLES = '''
       cluster: "centos"
 
 # power management
-  action: rhevm
+  - rhevm:
-  args:
       name: "uptime_server"
       user: "{{ rhev.admin.name }}"
       password: "{{ rhev.admin.pass }}"
@@ -246,11 +243,10 @@ EXAMPLES = '''
       cluster: "RH"
       state: "down"
       image: "centos7_x64"
-      cluster: "centos
+      cluster: "centos"
 
 # multi disk, multi nic create example
-  action: rhevm
+  - rhevm:
-  args:
       name: "server007"
       user: "{{ rhev.admin.name }}"
       password: "{{ rhev.admin.pass }}"
@@ -290,8 +286,7 @@ EXAMPLES = '''
         - "hd"
 
 # add a CD to the disk cd_drive
-  action: rhevm
+  - rhevm:
-  args:
       name: 'server007'
       user: "{{ rhev.admin.name }}"
       password: "{{ rhev.admin.pass }}"
@@ -299,8 +294,7 @@ EXAMPLES = '''
       cd_drive: 'rhev-tools-setup.iso'
 
 # new host deployment + host network configuration
-  action: rhevm
+  - rhevm:
-  args:
       name: "ovirt_node007"
       password: "{{ rhevm.admin.pass }}"
       type: "host"

lib/ansible/modules/cloud/misc/virt.py

@@ -75,17 +75,18 @@ EXAMPLES = '''
     state: running
 
 # /usr/bin/ansible invocations
-ansible host -m virt -a "name=alpha command=status"
+# ansible host -m virt -a "name=alpha command=status"
-ansible host -m virt -a "name=alpha command=get_xml"
+# ansible host -m virt -a "name=alpha command=get_xml"
-ansible host -m virt -a "name=alpha command=create uri=lxc:///"
+# ansible host -m virt -a "name=alpha command=create uri=lxc:///"
 
+---
 # a playbook example of defining and launching an LXC guest
 tasks:
   - name: define vm
     virt:
         name: foo
         command: define
-        xml: '{{ lookup('template', 'container-template.xml.j2') }}'
+        xml: "{{ lookup('template', 'container-template.xml.j2') }}"
         uri: 'lxc:///'
   - name: start vm
     virt:

lib/ansible/modules/cloud/misc/xenserver_facts.py

@@ -37,7 +37,8 @@ EXAMPLES = '''
   xenserver:
 
 - name: Print running VMs
-  debug: msg="{{ item }}"
+  debug:
+    msg: "{{ item }}"
   with_items: "{{ xs_vms.keys() }}"
   when: xs_vms[item]['power_state'] == "Running"
 

lib/ansible/modules/cloud/openstack/os_keystone_domain_facts.py

@@ -58,7 +58,7 @@ EXAMPLES = '''
     var: openstack_domains
 
 # Gather facts about a previously created domain with filter
-- os_keystone_domain_facts
+- os_keystone_domain_facts:
     cloud: awesomecloud
     name: demodomain
     filters:

lib/ansible/modules/cloud/openstack/os_project_facts.py

@@ -63,16 +63,15 @@ EXAMPLES = '''
     var: openstack_projects
 
 # Gather facts about a previously created project in a specific domain
-- os_project_facts
+- os_project_facts:
     cloud: awesomecloud
     name: demoproject
     domain: admindomain
 - debug:
     var: openstack_projects
 
-# Gather facts about a previously created project in a specific domain
+# Gather facts about a previously created project in a specific domain with filter
-  with filter
+- os_project_facts:
-- os_project_facts
     cloud: awesomecloud
     name: demoproject
     domain: admindomain

lib/ansible/modules/cloud/openstack/os_stack.py

@@ -86,12 +86,12 @@ EXAMPLES = '''
         bmc_flavor: m1.medium
         bmc_image: CentOS
         key_name: default
-        private_net: {{ private_net_param }}
+        private_net: "{{ private_net_param }}"
         node_count: 2
         name: undercloud
         image: CentOS
         my_flavor: m1.large
-        external_net: {{ external_net_param }}
+        external_net: "{{ external_net_param }}"
 '''
 
 RETURN = '''

lib/ansible/modules/cloud/openstack/os_user_facts.py

@@ -63,16 +63,15 @@ EXAMPLES = '''
     var: openstack_users
 
 # Gather facts about a previously created user in a specific domain
-- os_user_facts
+- os_user_facts:
     cloud: awesomecloud
     name: demouser
     domain: admindomain
 - debug:
     var: openstack_users
 
-# Gather facts about a previously created user in a specific domain
+# Gather facts about a previously created user in a specific domain with filter
-  with filter
+- os_user_facts:
-- os_user_facts
     cloud: awesomecloud
     name: demouser
     domain: admindomain

lib/ansible/modules/cloud/ovirt/ovirt_auth.py

@@ -102,7 +102,7 @@ tasks:
        # oVirt user's password, and include that yaml file with variable:
        - include_vars: ovirt_password.yml
 
-       - name: Obtain SSO token with using username/password credentials:
+       - name: Obtain SSO token with using username/password credentials
          ovirt_auth:
            url: https://ovirt.example.com/ovirt-engine/api
            username: admin@internal

lib/ansible/modules/cloud/ovirt/ovirt_snapshots.py

@@ -73,14 +73,14 @@ EXAMPLES = '''
 - ovirt_snapshots:
     vm_name: rhel7
     description: MySnapshot
-register: snapshot
+  register: snapshot
 
 # Create snapshot and save memory:
 - ovirt_snapshots:
     vm_name: rhel7
     description: SnapWithMem
     use_memory: true
-register: snapshot
+  register: snapshot
 
 # Restore snapshot:
 - ovirt_snapshots:

lib/ansible/modules/cloud/vmware/vca_vapp.py

@@ -137,12 +137,12 @@ EXAMPLES = '''
 - name: Creates a new vApp in a VCA instance
   vca_vapp:
     vapp_name: tower
-    state=present
+    state: present
-    template_name='Ubuntu Server 12.04 LTS (amd64 20150127)'
+    template_name: 'Ubuntu Server 12.04 LTS (amd64 20150127)'
-    vdc_name=VDC1
+    vdc_name: VDC1
-    instance_id=<your instance id here>
+    instance_id: '<your instance id here>'
-    username=<your username here>
+    username: '<your username here>'
-    password=<your password here>
+    password: '<your password here>'
 
 '''
 

lib/ansible/modules/cloud/vmware/vmware_cluster.py

@@ -64,14 +64,16 @@ extends_documentation_fragment: vmware.documentation
 EXAMPLES = '''
 # Example vmware_cluster command from Ansible Playbooks
 - name: Create Cluster
-      local_action: >
+  local_action:
-        vmware_cluster
+    module: vmware_cluster
-        hostname="{{ ansible_ssh_host }}" username=root password=vmware
+    hostname: "{{ ansible_ssh_host }}"
-        datacenter_name="datacenter"
+    username: root
-        cluster_name="cluster"
+    password: vmware
-        enable_ha=True
+    datacenter_name: "datacenter"
-        enable_drs=True
+    cluster_name: "cluster"
-        enable_vsan=True
+    enable_ha: True
+    enable_drs: True
+    enable_vsan: True
 '''
 
 try:

lib/ansible/modules/cloud/vmware/vmware_datacenter.py

@@ -65,10 +65,13 @@ extends_documentation_fragment: vmware.documentation
 EXAMPLES = '''
 # Example vmware_datacenter command from Ansible Playbooks
 - name: Create Datacenter
-      local_action: >
+  local_action:
-        vmware_datacenter
+    module: vmware_datacenter
-        hostname="{{ ansible_ssh_host }}" username=root password=vmware
+    hostname: "{{ ansible_ssh_host }}"
-        datacenter_name="datacenter" state=present
+    username: root
+    password: vmware
+    datacenter_name: "datacenter"
+    state: present
 '''
 
 try:

lib/ansible/modules/cloud/vmware/vmware_host.py

@@ -68,7 +68,7 @@ extends_documentation_fragment: vmware.documentation
 '''
 
 EXAMPLES = '''
-Example from Ansible playbook
+# Example from Ansible playbook
 
     - name: Add ESXi Host to VCSA
       local_action:

lib/ansible/modules/cloud/vmware/vmware_migrate_vmk.py

@@ -64,7 +64,7 @@ extends_documentation_fragment: vmware.documentation
 '''
 
 EXAMPLES = '''
-Example from Ansible playbook
+# Example from Ansible playbook
 
     - name: Migrate Management vmk
       local_action:

lib/ansible/modules/cloud/vmware/vmware_portgroup.py

@@ -60,7 +60,7 @@ extends_documentation_fragment: vmware.documentation
 '''
 
 EXAMPLES = '''
-Example from Ansible playbook
+# Example from Ansible playbook
 
     - name: Add Management Network VM Portgroup
       local_action:

lib/ansible/modules/cloud/vmware/vmware_target_canonical_facts.py

@@ -45,10 +45,12 @@ extends_documentation_fragment: vmware.documentation
 EXAMPLES = '''
 # Example vmware_target_canonical_facts command from Ansible Playbooks
 - name: Get Canonical name
-      local_action: >
+  local_action:
-        vmware_target_canonical_facts
+    module: vmware_target_canonical_facts
-        hostname="{{ ansible_ssh_host }}" username=root password=vmware
+    hostname: "{{ ansible_ssh_host }}"
-        target_id=7
+    username: root
+    password: vmware
+    target_id: 7
 '''
 
 try:

lib/ansible/modules/cloud/vmware/vmware_vmotion.py

@@ -51,7 +51,7 @@ extends_documentation_fragment: vmware.documentation
 '''
 
 EXAMPLES = '''
-Example from Ansible playbook
+# Example from Ansible playbook
 
     - name: Perform vMotion of VM
       local_action:

lib/ansible/modules/cloud/vmware/vmware_vswitch.py

@@ -65,7 +65,7 @@ extends_documentation_fragment: vmware.documentation
 '''
 
 EXAMPLES = '''
-Example from Ansible playbook
+# Example from Ansible playbook
 
     - name: Add a VMware vSwitch
       local_action:

lib/ansible/modules/cloud/vmware/vsphere_guest.py

@@ -153,6 +153,7 @@ requirements:
 
 
 EXAMPLES = '''
+---
 # Create a new VM on an ESX server
 # Returns changed = False when the VM already exists
 # Returns changed = True and a adds ansible_facts from the new VM
@@ -258,7 +259,7 @@ EXAMPLES = '''
     guest: newvm001
     vmware_guest_facts: yes
 
-
+---
 # Typical output of a vsphere_facts run on a guest
 # If vmware tools is not installed, ipadresses with return None
 
@@ -277,22 +278,22 @@ EXAMPLES = '''
   hw_processor_count: 2
   hw_product_uuid: "ef50bac8-2845-40ff-81d9-675315501dac"
 
-hw_power_status will be one of the following values:
+# hw_power_status will be one of the following values:
-  - POWERED ON
+#   - POWERED ON
-  - POWERED OFF
+#   - POWERED OFF
-  - SUSPENDED
+#   - SUSPENDED
-  - POWERING ON
+#   - POWERING ON
-  - POWERING OFF
+#   - POWERING OFF
-  - SUSPENDING
+#   - SUSPENDING
-  - RESETTING
+#   - RESETTING
-  - BLOCKED ON MSG
+#   - BLOCKED ON MSG
-  - REVERTING TO SNAPSHOT
+#   - REVERTING TO SNAPSHOT
-  - UNKNOWN
+#   - UNKNOWN
-as seen in the VMPowerState-Class of PySphere: http://git.io/vlwOq
+# as seen in the VMPowerState-Class of PySphere: http://git.io/vlwOq
 
+---
 # Remove a vm from vSphere
 # The VM must be powered_off or you need to use force to force a shutdown
-
 - vsphere_guest:
     vcenter_hostname: vcenter.mydomain.local
     username: myuser

lib/ansible/modules/commands/raw.py

@@ -76,5 +76,5 @@ EXAMPLES = '''
     executable: /bin/bash
 
 - name: safely use templated variables. Always use quote filter to avoid injection issues.
-  raw: {{package_mgr|quote}} {{pkg_flags|quote}} install {{python_simplejson|quote}}
+  raw: "{{package_mgr|quote}} {{pkg_flags|quote}} install {{python_simplejson|quote}}"
 '''

lib/ansible/modules/database/mysql/mysql_user.py

@@ -183,7 +183,7 @@ EXAMPLES = """
     state: present
 
 # Example privileges string format
-mydb.*:INSERT,UPDATE/anotherdb.*:SELECT/yetanotherdb.*:ALL
+# mydb.*:INSERT,UPDATE/anotherdb.*:SELECT/yetanotherdb.*:ALL
 
 # Example using login_unix_socket to connect to server
 - mysql_user:
@@ -200,10 +200,9 @@ mydb.*:INSERT,UPDATE/anotherdb.*:SELECT/yetanotherdb.*:ALL
     sql_log_bin: no
 
 # Example .my.cnf file for setting the root password
-
+# [client]
-[client]
+# user=root
-user=root
+# password=n<_665{vS43y
-password=n<_665{vS43y
 """
 
 import getpass

lib/ansible/modules/database/postgresql/postgresql_user.py

@@ -189,7 +189,7 @@ EXAMPLES = '''
     state: absent
 
 # Example privileges string format
-INSERT,UPDATE/table:SELECT/anothertable:ALL
+# INSERT,UPDATE/table:SELECT/anothertable:ALL
 
 # Remove an existing user's password
 - postgresql_user:

lib/ansible/modules/files/synchronize.py

@@ -244,7 +244,7 @@ EXAMPLES = '''
     links: yes
 
 # Synchronization of two paths both on the control machine
-- synchronize
+- synchronize:
     src: some/relative/path
     dest: /some/absolute/path
   delegate_to: localhost
@@ -282,9 +282,9 @@ EXAMPLES = '''
     rsync_path: "su -c rsync"
 
 # Example .rsync-filter file in the source directory
-- var       # exclude any path whose last part is 'var'
+# - var       # exclude any path whose last part is 'var'
-- /var      # exclude any path starting with 'var' starting at the source directory
+# - /var      # exclude any path starting with 'var' starting at the source directory
-+ /var/conf # include /var/conf even though it was previously excluded
+# + /var/conf # include /var/conf even though it was previously excluded
 
 # Synchronize passing in extra rsync options
 - synchronize:

lib/ansible/modules/monitoring/bigpanda.py

@@ -88,7 +88,7 @@ EXAMPLES = '''
     version: '1.3'
     token: '{{ bigpanda_token }}'
     state: started
-...
+
 - bigpanda:
     component: myapp
     version: '1.3'
@@ -104,7 +104,7 @@ EXAMPLES = '''
     state: started
   delegate_to: localhost
   register: deployment
-...
+
 - bigpanda:
     component: '{{ deployment.component }}'
     version: '{{ deployment.version }}'

lib/ansible/modules/monitoring/datadog_monitor.py

@@ -122,7 +122,7 @@ datadog_monitor:
   type: "metric alert"
   name: "Test monitor"
   state: "present"
-  query: "datadog.agent.up".over("host:host1").last(2).count_by_status()"
+  query: "datadog.agent.up.over('host:host1').last(2).count_by_status()"
   message: "Host [[host.name]] with IP [[host.ip]] is failing to report to datadog."
   api_key: "9775a026f1ca7d1c6c5af9d94d9595a4"
   app_key: "87ce4a24b5553d2e482ea8a8500e71b8ad4554ff"

lib/ansible/modules/monitoring/logicmonitor.py

@@ -230,7 +230,7 @@ EXAMPLES = '''
   tasks:
   - name: Create a host group
     # All tasks except for target=collector should use delegate_to: localhost
-    logicmonitor
+    logicmonitor:
       target: hostgroup
       action: add
       fullpath: /servers/development

lib/ansible/modules/network/asa/asa_acl.py

@@ -102,6 +102,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -111,6 +112,7 @@ vars:
     authorize: yes
     auth_pass: cisco
 
+---
 - asa_acl:
     lines:
       - access-list ACL-ANSIBLE extended permit tcp any any eq 82

lib/ansible/modules/network/asa/asa_command.py

@@ -84,6 +84,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -93,7 +94,7 @@ vars:
     auth_pass: cisco
     transport: cli
 
-
+---
 - asa_command:
     commands:
       - show version

lib/ansible/modules/network/asa/asa_config.py

@@ -172,6 +172,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -181,6 +182,7 @@ vars:
     auth_pass: cisco
     transport: cli
 
+---
 - asa_config:
     lines:
       - network-object host 10.80.30.18

lib/ansible/modules/network/bigswitch/bigmon_chain.py

@@ -2,7 +2,7 @@
 # -*- coding: utf-8 -*-
 
 # Ansible module to manage Big Monitoring Fabric service chains
-# (c) 2016, Ted Elhourani <ted@bigswitch.com>
+# (c) 2016, Ted Elhourani <ted@bigswitch.com>,
 #
 # This file is part of Ansible
 #

lib/ansible/modules/network/cloudengine/ce_command.py

@@ -84,6 +84,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -91,6 +92,7 @@ vars:
     password: admin
     transport: cli
 
+---
 - name: run display version on remote devices
   ce_command:
     commands: display version

lib/ansible/modules/network/cumulus/cl_bond.py

@@ -186,6 +186,7 @@ EXAMPLES = '''
 
 # In vars file
 # ============
+---
 cl_bonds:
   bond0:
     alias_name: uplink to isp

lib/ansible/modules/network/cumulus/cl_bridge.py

@@ -140,6 +140,7 @@ EXAMPLES = '''
 
 # In vars file
 # ============
+---
 cl_bridge:
   br0:
     alias_name: 'vlan aware bridge'

lib/ansible/modules/network/cumulus/cl_interface.py

@@ -146,7 +146,7 @@ EXAMPLES = '''
 # define cl_interfaces once in tasks
 # then write interfaces in variables file
 # with just the options you want.
-  - name: Create interfaces
+- name: Create interfaces
   cl_interface:
       name: '{{ item.key }}'
       ipv4: '{{ item.value.ipv4 | default(omit) }}'
@@ -170,6 +170,7 @@ EXAMPLES = '''
 
 # In vars file
 # ============
+---
 cl_interfaces:
   swp1:
     alias_name: uplink to isp

lib/ansible/modules/network/cumulus/cl_interface_policy.py

@@ -49,7 +49,7 @@ options:
 '''
 
 EXAMPLES = '''
-Example playbook entries using the cl_interface_policy module.
+# Example playbook entries using the cl_interface_policy module.
 
     - name: shows types of interface ranges supported
       cl_interface_policy:

lib/ansible/modules/network/cumulus/cl_license.py

@@ -89,10 +89,7 @@ EXAMPLES = '''
       state: reloaded
 
 # Force all switches to accept a new license. Typically not needed
-ansible -m cl_license -a "src='http://10.1.1.1/new_lic' force=yes" -u root all
+# ansible -m cl_license -a "src='http://10.1.1.1/new_lic' force=yes" -u root all
-
-----
-
 '''
 
 RETURN = '''

lib/ansible/modules/network/dellos6/dellos6_command.py

@@ -87,20 +87,20 @@ tasks:
  - name: run show version on remote devices
    dellos6_command:
      commands: show version
-     provider "{{ cli }}"
+     provider: "{{ cli }}"
 
  - name: run show version and check to see if output contains Dell
    dellos6_command:
      commands: show version
      wait_for: result[0] contains Dell
-     provider "{{ cli }}"
+     provider: "{{ cli }}"
 
  - name: run multiple commands on remote nodes
    dellos6_command:
      commands:
       - show version
       - show interfaces
-     provider "{{ cli }}"
+     provider: "{{ cli }}"
 
  - name: run multiple commands and evaluate the output
    dellos6_command:
@@ -110,7 +110,7 @@ tasks:
      wait_for:
       - result[0] contains Dell
       - result[1] contains Access
-     provider "{{ cli }}"
+     provider: "{{ cli }}"
 """
 
 RETURN = """

lib/ansible/modules/network/dnsimple.py

@@ -136,7 +136,7 @@ EXAMPLES = '''
   delegate_to: localhost
 
 # create a my.com CNAME record to example.com
-- dnsimple
+- dnsimple:
     domain: my.com
     record: ''
     type: CNAME

lib/ansible/modules/network/f5/bigip_pool.py

@@ -199,7 +199,7 @@ EXAMPLES = '''
       state: "present"
       name: "my-pool"
       partition: "Common"
-      host: "{{ ansible_default_ipv4["address"] }}"
+      host: "{{ ansible_default_ipv4['address'] }}"
       port: 80
 
 - name: Remove pool member from pool
@@ -210,7 +210,7 @@ EXAMPLES = '''
       state: "absent"
       name: "my-pool"
       partition: "Common"
-      host: "{{ ansible_default_ipv4["address"] }}"
+      host: "{{ ansible_default_ipv4['address'] }}"
       port: 80
 
 - name: Delete pool

lib/ansible/modules/network/f5/bigip_pool_member.py

@@ -132,7 +132,7 @@ EXAMPLES = '''
       state: "present"
       pool: "my-pool"
       partition: "Common"
-      host: "{{ ansible_default_ipv4["address"] }}"
+      host: "{{ ansible_default_ipv4['address'] }}"
       port: 80
       description: "web server"
       connection_limit: 100
@@ -148,7 +148,7 @@ EXAMPLES = '''
       state: "present"
       pool: "my-pool"
       partition: "Common"
-      host: "{{ ansible_default_ipv4["address"] }}"
+      host: "{{ ansible_default_ipv4['address'] }}"
       port: 80
       ratio: 1
       description: "nginx server"
@@ -162,7 +162,7 @@ EXAMPLES = '''
       state: "absent"
       pool: "my-pool"
       partition: "Common"
-      host: "{{ ansible_default_ipv4["address"] }}"
+      host: "{{ ansible_default_ipv4['address'] }}"
       port: 80
   delegate_to: localhost
 
@@ -190,7 +190,7 @@ EXAMPLES = '''
       monitor_state: "disabled"
       pool: "my-pool"
       partition: "Common"
-      host: "{{ ansible_default_ipv4["address"] }}"
+      host: "{{ ansible_default_ipv4['address'] }}"
       port: 80
   delegate_to: localhost
 '''

lib/ansible/modules/network/ios/ios_facts.py

@@ -49,6 +49,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -56,6 +57,7 @@ vars:
     password: cisco
     transport: cli
 
+---
 # Collect all facts from the device
 - ios_facts:
     gather_subset: all

lib/ansible/modules/network/junos/_junos_template.py

@@ -99,10 +99,12 @@ EXAMPLES = """
     comment: update system config
 
 - name: replace config hierarchy
+  junos_template:
     src: config.j2
     action: replace
 
 - name: overwrite the config
+  junos_template:
     src: config.j2
     action: overwrite
 """

lib/ansible/modules/network/junos/junos_command.py

@@ -110,12 +110,14 @@ notes:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   netconf:
     host: "{{ inventory_hostname }}"
     username: ansible
     password: Ansible
 
+---
 - name: run a set of commands
   junos_command:
     commands: ['show version', 'show ip route']

lib/ansible/modules/network/junos/junos_config.py

@@ -146,12 +146,14 @@ notes:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   netconf:
     host: "{{ inventory_hostname }}"
     username: ansible
     password: Ansible
 
+---
 - name: load configure file into device
   junos_config:
     src: srx.cfg

lib/ansible/modules/network/junos/junos_netconf.py

@@ -58,6 +58,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -65,6 +66,7 @@ vars:
     password: Ansible
     transport: cli
 
+---
 - name: enable netconf service on port 830
   junos_netconf:
     listens_on: 830

lib/ansible/modules/network/nmcli.py

@@ -394,8 +394,6 @@ EXAMPLES='''
       - '{{ nmcli_ethernet }}'
 
 ## playbook-del.yml example
-
----
 - hosts: openstack-stage
   remote_user: root
   tasks:

lib/ansible/modules/network/nxos/nxos_bgp_neighbor_af.py

@@ -259,8 +259,8 @@ options:
         choices: ['present','absent']
 '''
 EXAMPLES = '''
-configure RR client
+- name: configure RR client
-- nxos_bgp_neighbor_af:
+  nxos_bgp_neighbor_af:
     asn: 65535
     neighbor: '3.3.3.3'
     afi: ipv4

lib/ansible/modules/network/nxos/nxos_command.py

@@ -91,6 +91,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -98,6 +99,7 @@ vars:
     password: admin
     transport: cli
 
+---
 - name: run show version on remote devices
   nxos_command:
     commands: show version

lib/ansible/modules/network/nxos/nxos_config.py

@@ -164,6 +164,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -171,6 +172,7 @@ vars:
     password: admin
     transport: cli
 
+---
 - name: configure top level configuration and save it
   nxos_config:
     lines: hostname {{ inventory_hostname }}

lib/ansible/modules/network/nxos/nxos_facts.py

@@ -53,6 +53,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -60,6 +61,7 @@ vars:
     password: admin
     transport: cli
 
+---
 - nxos_facts:
     gather_subset: all
 

lib/ansible/modules/network/nxos/nxos_interface.py

@@ -89,48 +89,49 @@ options:
 '''
 
 EXAMPLES = '''
-- name Ensure an interface is a Layer 3 port and that it has the proper description
+- name: Ensure an interface is a Layer 3 port and that it has the proper description
   nxos_interface:
     interface: Ethernet1/1
     description: 'Configured by Ansible'
     mode: layer3
     host: 68.170.147.165
 
-- name Admin down an interface
+- name: Admin down an interface
   nxos_interface:
     interface: Ethernet2/1
     host: 68.170.147.165
     admin_state: down
 
-- name Remove all loopback interfaces
+- name: Remove all loopback interfaces
   nxos_interface:
     interface: loopback
     state: absent
     host: 68.170.147.165
 
-- name Remove all logical interfaces
+- name: Remove all logical interfaces
   nxos_interface:
     interface_type: "{{ item }} "
     state: absent
     host: "{{ inventory_hostname }}"
-
   with_items:
     - loopback
     - portchannel
     - svi
     - nve
-- name Admin up all ethernet interfaces
+
+- name: Admin up all ethernet interfaces
   nxos_interface:
     interface: ethernet
     host: 68.170.147.165
     admin_state: up
 
-- name Admin down ALL interfaces (physical and logical)
+- name: Admin down ALL interfaces (physical and logical)
   nxos_interface:
     interface: all
     host: 68.170.147.165
     admin_state: down
 '''
+
 RETURN = '''
 proposed:
     description: k/v pairs of parameters passed into module

lib/ansible/modules/network/openswitch/ops_command.py

@@ -85,6 +85,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -92,6 +93,7 @@ vars:
     password: netop
     transport: cli
 
+---
 - ops_command:
     commands:
       - show version

lib/ansible/modules/network/openswitch/ops_config.py

@@ -139,12 +139,14 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
     username: netop
     password: netop
 
+---
 - name: configure hostname over cli
   ops_config:
     lines:

lib/ansible/modules/network/openswitch/ops_facts.py

@@ -73,6 +73,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -85,6 +86,7 @@ vars:
     password: netop
     transport: rest
 
+---
 - ops_facts:
     gather_subset: all
     provider: "{{ rest }}"

lib/ansible/modules/network/sros/sros_command.py

@@ -85,6 +85,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -92,6 +93,7 @@ vars:
     password: admin
     transport: cli
 
+---
 tasks:
   - name: run show version on remote devices
     sros_command:

lib/ansible/modules/network/sros/sros_config.py

@@ -160,6 +160,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -167,6 +168,7 @@ vars:
     password: admin
     transport: cli
 
+---
 - name: enable rollback location
   sros_config:
     lines: configure system rollback rollback-location "cf3:/ansible"

lib/ansible/modules/network/sros/sros_rollback.py

@@ -79,6 +79,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -86,6 +87,7 @@ vars:
     password: admin
     transport: cli
 
+---
 - name: configure rollback location
   sros_rollback:
     rollback_location: "cb3:/ansible"

lib/ansible/modules/notification/jabber.py

@@ -84,7 +84,7 @@ EXAMPLES = '''
     msg: Ansible task finished
 
 # send a message, specifying the host and port
-- jabber
+- jabber:
     user: mybot@example.net
     host: talk.example.net
     port: 5223

lib/ansible/modules/notification/sendgrid.py

@@ -124,7 +124,7 @@ EXAMPLES = '''
   delegate_to: localhost
 
 # send an email to more than one recipient that the build failed
-- sendgrid
+- sendgrid:
       username: "{{ sendgrid_username }}"
       password: "{{ sendgrid_password }}"
       from_address: "build@mycompany.com"

lib/ansible/modules/notification/slack.py

@@ -162,7 +162,7 @@ EXAMPLES = """
         title: System load
         fields:
           - title: System A
-            value: load average: 0,74, 0,66, 0,63"
+            value: "load average: 0,74, 0,66, 0,63"
             short: True
           - title: System B
             value: 'load average: 5,16, 4,64, 2,43'

lib/ansible/modules/notification/telegram.py

@@ -54,8 +54,8 @@ options:
 
 EXAMPLES = """
 
-send a message to chat in playbook
+- name: send a message to chat in playbook
-- telegram:
+  telegram:
     token: 'bot9999999:XXXXXXXXXXXXXXXXXXXXXXX'
     chat_id: 000000
     msg: Ansible task finished

lib/ansible/modules/packaging/language/npm.py

@@ -81,44 +81,44 @@ options:
 '''
 
 EXAMPLES = '''
-description: Install "coffee-script" node.js package.
+- name: Install "coffee-script" node.js package.
-- npm:
+  npm:
     name: coffee-script
     path: /app/location
 
-description: Install "coffee-script" node.js package on version 1.6.1.
+- name: Install "coffee-script" node.js package on version 1.6.1.
-- npm:
+  npm:
     name: coffee-script
     version: '1.6.1'
     path: /app/location
 
-description: Install "coffee-script" node.js package globally.
+- name: Install "coffee-script" node.js package globally.
-- npm:
+  npm:
     name: coffee-script
     global: yes
 
-description: Remove the globally package "coffee-script".
+- name: Remove the globally package "coffee-script".
-- npm:
+  npm:
     name: coffee-script
     global: yes
     state: absent
 
-description: Install "coffee-script" node.js package from custom registry.
+- name: Install "coffee-script" node.js package from custom registry.
-- npm:
+  npm:
     name: coffee-script
     registry: 'http://registry.mysite.com'
 
-description: Install packages based on package.json.
+- name: Install packages based on package.json.
-- npm:
+  npm:
     path: /app/location
 
-description: Update packages based on package.json to their latest version.
+- name: Update packages based on package.json to their latest version.
-- npm:
+  npm:
     path: /app/location
     state: latest
 
-description: Install packages based on package.json using the npm installed with nvm v0.10.1.
+- name: Install packages based on package.json using the npm installed with nvm v0.10.1.
-- npm:
+  npm:
     path: /app/location
     executable: /opt/nvm/v0.10.1/bin/npm
     state: present

lib/ansible/modules/packaging/os/sorcery.py

@@ -128,8 +128,8 @@ EXAMPLES = '''
 
 # Playbook: make sure spells with/without required dependencies (if any) are installed
 - sorcery:
-    name: {{ item.spell }}
+    name: "{{ item.spell }}"
-    depends: {{ item.depends | default(None) }}
+    depends: "{{ item.depends | default(None) }}"
     state: present
   with_items:
     - { spell: 'vifm', depends: '+file,-gtk+2' }

lib/ansible/modules/packaging/os/zypper_repository.py

@@ -145,7 +145,7 @@ EXAMPLES = '''
 
 # Force refresh of a repository
 - zypper_repository:
-    repo: 'http://my_internal_ci_repo/repo
+    repo: 'http://my_internal_ci_repo/repo'
     name: my_ci_repo
     state: present
     runrefresh: yes

lib/ansible/modules/remote_management/foreman/katello.py

@@ -57,7 +57,8 @@ options:
 '''
 
 EXAMPLES = '''
-Simple Example:
+---
+# Simple Example:
 
 - name: "Create Product"
   local_action:
@@ -69,9 +70,8 @@ Simple Example:
       params:
         name: "Centos 7"
 
-Abstraction Example:
+# Abstraction Example:
-
+# katello.yml
-katello.yml
 ---
 - name: "{{ name }}"
   local_action:
@@ -82,7 +82,7 @@ katello.yml
       entity: "{{ entity }}"
       params: "{{ params }}"
 
-tasks.yml
+# tasks.yml
 ---
 - include: katello.yml
   vars:

lib/ansible/modules/storage/netapp/netapp_e_snapshot_volume.py

@@ -96,7 +96,7 @@ EXAMPLES = """
     - name: Snapshot volume
       netapp_e_snapshot_volume:
         ssid: "{{ ssid }}"
-        api_url: "{{ netapp_api_url }}"/
+        api_url: "{{ netapp_api_url }}/"
         api_username: "{{ netapp_api_username }}"
         api_password: "{{ netapp_api_password }}"
         state: present

lib/ansible/modules/storage/zfs/zfs_facts.py

@@ -78,13 +78,19 @@ options:
 '''
 
 EXAMPLES = '''
-name: Gather facts about ZFS dataset rpool/export/home
+- name: Gather facts about ZFS dataset rpool/export/home
-zfs_facts: dataset=rpool/export/home
+  zfs_facts:
-
+    dataset: rpool/export/home
-name: Report space usage on ZFS filesystems under data/home
+
-zfs_facts: name=data/home recurse=yes type=filesystem
+- name: Report space usage on ZFS filesystems under data/home
-debug: msg='ZFS dataset {{ item.name }} consumes {{ item.used }} of disk space.'
+  zfs_facts:
-with_items: '{{ ansible_zfs_datasets }}
+    name: data/home
+    recurse: yes
+    type: filesystem
+
+- debug:
+    msg: 'ZFS dataset {{ item.name }} consumes {{ item.used }} of disk space.'
+  with_items: '{{ ansible_zfs_datasets }}'
 '''
 
 RETURN = '''

lib/ansible/modules/system/crypttab.py

@@ -91,7 +91,7 @@ EXAMPLES = '''
     state: opts_present
     opts: discard
   with_items: '{{ ansible_mounts }}'
-  when: '/dev/mapper/luks-' in {{ item.device }}
+  when: "'/dev/mapper/luks-' in {{ item.device }}"
 '''
 
 from ansible.module_utils.basic import *

lib/ansible/modules/system/pamd.py

@@ -136,7 +136,7 @@ EXAMPLES = """
     control: required
     module_path: pam_faillock.so
     new_type: auth
-    new_control=sufficient
+    new_control: sufficient
     new_module_path: pam_faillock.so
     state: after
 

lib/ansible/modules/system/setup.py

@@ -92,28 +92,28 @@ author:
 
 EXAMPLES = """
 # Display facts from all hosts and store them indexed by I(hostname) at C(/tmp/facts).
-ansible all -m setup --tree /tmp/facts
+# ansible all -m setup --tree /tmp/facts
 
 # Display only facts regarding memory found by ansible on all hosts and output them.
-ansible all -m setup -a 'filter=ansible_*_mb'
+# ansible all -m setup -a 'filter=ansible_*_mb'
 
 # Display only facts returned by facter.
-ansible all -m setup -a 'filter=facter_*'
+# ansible all -m setup -a 'filter=facter_*'
 
 # Display only facts about certain interfaces.
-ansible all -m setup -a 'filter=ansible_eth[0-2]'
+# ansible all -m setup -a 'filter=ansible_eth[0-2]'
 
 # Restrict additional gathered facts to network and virtual.
-ansible all -m setup -a 'gather_subset=network,virtual'
+# ansible all -m setup -a 'gather_subset=network,virtual'
 
 # Do not call puppet facter or ohai even if present.
-ansible all -m setup -a 'gather_subset=!facter,!ohai'
+# ansible all -m setup -a 'gather_subset=!facter,!ohai'
 
 # Only collect the minimum amount of facts:
-ansible all -m setup -a 'gather_subset=!all'
+# ansible all -m setup -a 'gather_subset=!all'
 
 # Display facts from Windows hosts with custom facts stored in C(C:\\custom_facts).
-ansible windows -m setup -a "fact_path='c:\\custom_facts'"
+# ansible windows -m setup -a "fact_path='c:\\custom_facts'"
 """
 
 

lib/ansible/modules/web_infrastructure/deploy_helper.py

@@ -130,42 +130,42 @@ EXAMPLES = '''
 
 # General explanation, starting with an example folder structure for a project:
 
-root:
+# root:
-    releases:
+#     releases:
-        - 20140415234508
+#         - 20140415234508
-        - 20140415235146
+#         - 20140415235146
-        - 20140416082818
+#         - 20140416082818
-
+#
-    shared:
+#     shared:
-        - sessions
+#         - sessions
-        - uploads
+#         - uploads
-
+#
-    current: -> releases/20140416082818
+#     current: releases/20140416082818
-
-
-The 'releases' folder holds all the available releases. A release is a complete build of the application being
-deployed. This can be a clone of a repository for example, or a sync of a local folder on your filesystem.
-Having timestamped folders is one way of having distinct releases, but you could choose your own strategy like
-git tags or commit hashes.
-
-During a deploy, a new folder should be created in the releases folder and any build steps required should be
-performed. Once the new build is ready, the deploy procedure is 'finalized' by replacing the 'current' symlink
-with a link to this build.
-
-The 'shared' folder holds any resource that is shared between releases. Examples of this are web-server
-session files, or files uploaded by users of your application. It's quite common to have symlinks from a release
-folder pointing to a shared/subfolder, and creating these links would be automated as part of the build steps.
 
-The 'current' symlink points to one of the releases. Probably the latest one, unless a deploy is in progress.
-The web-server's root for the project will go through this symlink, so the 'downtime' when switching to a new
-release is reduced to the time it takes to switch the link.
 
-To distinguish between successful builds and unfinished ones, a file can be placed in the folder of the release
+# The 'releases' folder holds all the available releases. A release is a complete build of the application being
-that is currently in progress. The existence of this file will mark it as unfinished, and allow an automated
+# deployed. This can be a clone of a repository for example, or a sync of a local folder on your filesystem.
-procedure to remove it during cleanup.
+# Having timestamped folders is one way of having distinct releases, but you could choose your own strategy like
+# git tags or commit hashes.
+#
+# During a deploy, a new folder should be created in the releases folder and any build steps required should be
+# performed. Once the new build is ready, the deploy procedure is 'finalized' by replacing the 'current' symlink
+# with a link to this build.
+#
+# The 'shared' folder holds any resource that is shared between releases. Examples of this are web-server
+# session files, or files uploaded by users of your application. It's quite common to have symlinks from a release
+# folder pointing to a shared/subfolder, and creating these links would be automated as part of the build steps.
+#
+# The 'current' symlink points to one of the releases. Probably the latest one, unless a deploy is in progress.
+# The web-server's root for the project will go through this symlink, so the 'downtime' when switching to a new
+# release is reduced to the time it takes to switch the link.
+#
+# To distinguish between successful builds and unfinished ones, a file can be placed in the folder of the release
+# that is currently in progress. The existence of this file will mark it as unfinished, and allow an automated
+# procedure to remove it during cleanup.
 
 
-# Typical usage:
+# Typical usage
 - name: Initialize the deploy root and gather facts
   deploy_helper:
     path: /path/to/root

lib/ansible/modules/web_infrastructure/ejabberd_user.py

@@ -61,7 +61,7 @@ notes:
     - The ejabberd configuration file must include mod_admin_extra as a module.
 '''
 EXAMPLES = '''
-Example playbook entries using the ejabberd_user module to manage users state.
+# Example playbook entries using the ejabberd_user module to manage users state.
 
 - name: create a user if it does not exists
   ejabberd_user:

lib/ansible/modules/windows/win_acl.py

@@ -129,6 +129,7 @@ EXAMPLES = r'''
 
 # Remove previously added rule for IIS_IUSRS
 - name: Remove FullControl AccessRule for IIS_IUSRS
+  win_acl:
     path: C:\inetpub\wwwroot\MySite
     user: IIS_IUSRS
     rights: FullControl
@@ -139,6 +140,7 @@ EXAMPLES = r'''
 
 # Deny Intern
 - name: Deny Deny
+  win_acl:
     path: C:\Administrator\Documents
     user: Intern
     rights: Read,Write,Modify,FullControl,Delete

lib/ansible/modules/windows/win_find.py

@@ -149,7 +149,7 @@ EXAMPLES = r'''
 # Find files in path based on regex pattern
 - win_find:
     paths: D:\temp
-    patterns: "out_\d{8}-\d{6}.log"
+    patterns: 'out_\d{8}-\d{6}.log'
 
 # Find files older than 1 day
 - win_find:

lib/ansible/modules/windows/win_package.py

@@ -113,7 +113,7 @@ EXAMPLES = r'''
 
 # Specify multiple non-zero return codes when successful
 # In this case we can say that both 0 (SUCCESSFUL) and 3010 (REBOOT REQUIRED) codes are acceptable
-  - name: 'Microsoft .NET Framework 4.5.1'
+- name: 'Microsoft .NET Framework 4.5.1'
   win_package:
     path: https://download.microsoft.com/download/1/6/7/167F0D79-9317-48AE-AEDB-17120579F8E2/NDP451-KB2858728-x86-x64-AllOS-ENU.exe
     productid: '{7DEBE4EB-6B40-3766-BB35-5CBBC385DA37}'

lib/ansible/modules/windows/win_path.py

@@ -75,11 +75,11 @@ EXAMPLES = r'''
 - name: Ensure that system32 and Powershell are present on the global system path, and in the specified order
   win_path:
     elements:
-    - %SystemRoot%\system32
+    - '%SystemRoot%\system32'
-    - %SystemRoot%\system32\WindowsPowerShell\v1.0
+    - '%SystemRoot%\system32\WindowsPowerShell\v1.0'
 
 - name: Ensure that C:\Program Files\MyJavaThing is not on the current user's CLASSPATH
-  win_path
+  win_path:
     name: CLASSPATH
     elements: C:\Program Files\MyJavaThing
     scope: user

lib/ansible/modules/windows/win_ping.py

@@ -42,7 +42,7 @@ author: "Chris Church (@cchurch)"
 
 EXAMPLES = r'''
 # Test connectivity to a windows host
-ansible winserver -m win_ping
+# ansible winserver -m win_ping
 
 # Example from an Ansible Playbook
 - win_ping:

lib/ansible/modules/windows/win_unzip.py

@@ -89,7 +89,6 @@ EXAMPLES = r'''
     creates: C:\Users\Phil\OldLogs
 
 # This playbook example unzips a .zip file and recursively decompresses the contained .gz files and removes all unneeded compressed files after completion.
----
 - name: Unzip ApplicationLogs.zip and decompress all GZipped log files
   hosts: all
   gather_facts: false
@@ -102,14 +101,14 @@ EXAMPLES = r'''
         rm: true
 
 # Install PSCX to use for extracting a gz file
-  - name: Grab PSCX msi
+- name: Grab PSCX msi
   win_get_url:
     url: http://download-codeplex.sec.s-msft.com/Download/Release?ProjectName=pscx&DownloadId=923562&FileTime=130585918034470000&Build=20959
     dest: C:\pscx.msi
-  - name: Install PSCX
+- name: Install PSCX
   win_msi:
     path: C:\pscx.msi
-  - name: Unzip gz log
+- name: Unzip gz log
   win_unzip:
     src: C:\Logs\application-error-logs.gz
     dest: C:\ExtractedLogs\application-error-logs

test/sanity/validate-modules/utils.py

@@ -71,12 +71,20 @@ class CaptureStd():
         return self.stdout.getvalue(), self.stderr.getvalue()
 
 
-def parse_yaml(value, lineno, module, name):
+def parse_yaml(value, lineno, module, name, load_all=False):
     traces = []
     errors = []
     data = None
+
+    if load_all:
+        loader = yaml.safe_load_all
+    else:
+        loader = yaml.safe_load
+
     try:
-        data = yaml.safe_load(value)
+        data = loader(value)
+        if load_all:
+            data = list(data)
     except yaml.MarkedYAMLError as e:
         e.problem_mark.line += lineno - 1
         e.problem_mark.name = '%s.%s' % (module, name)

test/sanity/validate-modules/validate-modules

@@ -471,6 +471,12 @@ class ModuleValidator(Validator):
 
         if not bool(doc_info['EXAMPLES']['value']):
             self.errors.append('No EXAMPLES provided')
+        else:
+            _, errors, traces = parse_yaml(doc_info['EXAMPLES']['value'],
+                                           doc_info['EXAMPLES']['lineno'],
+                                           self.name, 'EXAMPLES', load_all=True)
+            self.errors.extend(errors)
+            self.traces.extend(traces)
 
         if not bool(doc_info['RETURN']['value']):
             if self._is_new_module():