interfaces_file: Add test for pre-up/post-up with inet/inet6

pull/47447/head
Jocelyn Jaubert 6 years ago committed by Michael Scherer
parent bd7001cdb6
commit 4352a4e54d

@ -5,6 +5,8 @@ iface lo inet loopback
# The primary network interface
iface eth0 inet static
address 192.168.0.1
post-up echo configuring ipv4
iface eth0 inet6 static
address fc00::1
post-up echo configuring ipv6

@ -4,7 +4,9 @@
"address_family": "inet6",
"down": [],
"method": "static",
"post-up": [],
"post-up": [
"echo configuring ipv6"
],
"pre-up": [],
"up": []
},

@ -5,6 +5,8 @@ iface lo inet loopback
# The primary network interface
iface eth0 inet static
address 192.168.0.1
post-up echo configuring ipv4
iface eth0 inet6 static
address fc00::1
post-up echo configuring ipv6

@ -4,7 +4,9 @@
"address_family": "inet6",
"down": [],
"method": "static",
"post-up": [],
"post-up": [
"echo configuring ipv6"
],
"pre-up": [],
"up": []
},

@ -5,6 +5,8 @@ iface lo inet loopback
# The primary network interface
iface eth0 inet static
address 192.168.0.1
post-up echo configuring ipv4
iface eth0 inet6 static
address fc00::1
post-up echo configuring ipv6

@ -4,7 +4,9 @@
"address_family": "inet6",
"down": [],
"method": "static",
"post-up": [],
"post-up": [
"echo configuring ipv6"
],
"pre-up": [],
"up": []
},

@ -5,6 +5,8 @@ iface lo inet loopback
# The primary network interface
iface eth0 inet static
address 192.168.0.42
post-up echo configuring ipv4
iface eth0 inet6 static
address fc00::1
post-up echo configuring ipv6

@ -4,7 +4,9 @@
"address_family": "inet6",
"down": [],
"method": "static",
"post-up": [],
"post-up": [
"echo configuring ipv6"
],
"pre-up": [],
"up": []
},

@ -0,0 +1,13 @@
# The loopback network interface
auto lo eth0
iface lo inet loopback
# The primary network interface
iface eth0 inet static
address 192.168.0.1
post-up echo configuring ipv4
post-up XXXX_ipv4
iface eth0 inet6 static
address fc00::1
post-up echo configuring ipv6

@ -0,0 +1,21 @@
{
"eth0": {
"address": "fc00::1",
"address_family": "inet6",
"down": [],
"method": "static",
"post-up": [
"echo configuring ipv6"
],
"pre-up": [],
"up": []
},
"lo": {
"address_family": "inet",
"down": [],
"method": "loopback",
"post-up": [],
"pre-up": [],
"up": []
}
}

@ -0,0 +1,13 @@
# The loopback network interface
auto lo eth0
iface lo inet loopback
# The primary network interface
iface eth0 inet static
address 192.168.0.1
post-up echo configuring ipv4
pre-up XXXX_ipv4
iface eth0 inet6 static
address fc00::1
post-up echo configuring ipv6

@ -0,0 +1,21 @@
{
"eth0": {
"address": "fc00::1",
"address_family": "inet6",
"down": [],
"method": "static",
"post-up": [
"echo configuring ipv6"
],
"pre-up": [],
"up": []
},
"lo": {
"address_family": "inet",
"down": [],
"method": "loopback",
"post-up": [],
"pre-up": [],
"up": []
}
}

@ -5,6 +5,8 @@ iface lo inet loopback
# The primary network interface
iface eth0 inet static
address 192.168.0.1
post-up echo configuring ipv4
iface eth0 inet6 static
address fc00::42
post-up echo configuring ipv6

@ -4,7 +4,9 @@
"address_family": "inet6",
"down": [],
"method": "static",
"post-up": [],
"post-up": [
"echo configuring ipv6"
],
"pre-up": [],
"up": []
},

@ -0,0 +1,13 @@
# The loopback network interface
auto lo eth0
iface lo inet loopback
# The primary network interface
iface eth0 inet static
address 192.168.0.1
post-up echo configuring ipv4
iface eth0 inet6 static
address fc00::1
post-up echo configuring ipv6
post-up XXXX_ipv6

@ -0,0 +1,21 @@
{
"eth0": {
"address": "fc00::1",
"address_family": "inet6",
"down": [],
"method": "static",
"post-up": [
"echo configuring ipv6"
],
"pre-up": [],
"up": []
},
"lo": {
"address_family": "inet",
"down": [],
"method": "loopback",
"post-up": [],
"pre-up": [],
"up": []
}
}

@ -0,0 +1,13 @@
# The loopback network interface
auto lo eth0
iface lo inet loopback
# The primary network interface
iface eth0 inet static
address 192.168.0.1
post-up echo configuring ipv4
iface eth0 inet6 static
address fc00::1
post-up echo configuring ipv6
pre-up XXXX_ipv6

@ -0,0 +1,21 @@
{
"eth0": {
"address": "fc00::1",
"address_family": "inet6",
"down": [],
"method": "static",
"post-up": [
"echo configuring ipv6"
],
"pre-up": [],
"up": []
},
"lo": {
"address_family": "inet",
"down": [],
"method": "loopback",
"post-up": [],
"pre-up": [],
"up": []
}
}

@ -5,6 +5,8 @@ iface lo inet loopback
# The primary network interface
iface eth0 inet manual
address 192.168.0.1
post-up echo configuring ipv4
iface eth0 inet6 manual
address fc00::1
post-up echo configuring ipv6

@ -4,7 +4,9 @@
"address_family": "inet6",
"down": [],
"method": "manual",
"post-up": [],
"post-up": [
"echo configuring ipv6"
],
"pre-up": [],
"up": []
},

@ -5,6 +5,8 @@ iface lo inet loopback
# The primary network interface
iface eth0 inet static
address 192.168.0.1
post-up echo configuring ipv4
iface eth0 inet6 static
address fc00::1
post-up echo configuring ipv6

@ -4,7 +4,9 @@
"address_family": "inet6",
"down": [],
"method": "static",
"post-up": [],
"post-up": [
"echo configuring ipv6"
],
"pre-up": [],
"up": []
},

@ -5,7 +5,9 @@ iface lo inet loopback
# The primary network interface
iface eth0 inet static
address 192.168.0.1
post-up echo configuring ipv4
iface eth0 inet6 static
address fc00::1
post-up echo configuring ipv6
mtu 1350

@ -4,7 +4,9 @@
"address_family": "inet6",
"down": [],
"method": "static",
"post-up": [],
"post-up": [
"echo configuring ipv6"
],
"pre-up": [],
"up": []
},

@ -5,6 +5,8 @@ iface lo inet loopback
# The primary network interface
iface eth0 inet static
address 192.168.0.1
post-up echo configuring ipv4
iface eth0 inet6 static
address fc00::1
post-up echo configuring ipv6

@ -4,7 +4,9 @@
"address_family": "inet6",
"down": [],
"method": "static",
"post-up": [],
"post-up": [
"echo configuring ipv6"
],
"pre-up": [],
"up": []
},

@ -0,0 +1,7 @@
# The loopback network interface
auto lo eth0
iface lo inet loopback
# The primary network interface
iface eth0 inet dhcp
post-up XXXX_ipv4

@ -0,0 +1,18 @@
{
"eth0": {
"address_family": "inet",
"down": [],
"method": "dhcp",
"post-up": [],
"pre-up": [],
"up": []
},
"lo": {
"address_family": "inet",
"down": [],
"method": "loopback",
"post-up": [],
"pre-up": [],
"up": []
}
}

@ -0,0 +1,7 @@
# The loopback network interface
auto lo eth0
iface lo inet loopback
# The primary network interface
iface eth0 inet dhcp
pre-up XXXX_ipv4

@ -0,0 +1,18 @@
{
"eth0": {
"address_family": "inet",
"down": [],
"method": "dhcp",
"post-up": [],
"pre-up": [],
"up": []
},
"lo": {
"address_family": "inet",
"down": [],
"method": "loopback",
"post-up": [],
"pre-up": [],
"up": []
}
}

@ -0,0 +1,6 @@
# The loopback network interface
auto lo eth0
iface lo inet loopback
# The primary network interface
iface eth0 inet dhcp

@ -0,0 +1,9 @@
fail_json message: Error: interface eth0 not found
options:
{
"address_family": "inet6",
"iface": "eth0",
"option": "post-up",
"state": "present",
"value": "XXXX_ipv6"
}

@ -0,0 +1,18 @@
{
"eth0": {
"address_family": "inet",
"down": [],
"method": "dhcp",
"post-up": [],
"pre-up": [],
"up": []
},
"lo": {
"address_family": "inet",
"down": [],
"method": "loopback",
"post-up": [],
"pre-up": [],
"up": []
}
}

@ -0,0 +1,6 @@
# The loopback network interface
auto lo eth0
iface lo inet loopback
# The primary network interface
iface eth0 inet dhcp

@ -0,0 +1,9 @@
fail_json message: Error: interface eth0 not found
options:
{
"address_family": "inet6",
"iface": "eth0",
"option": "pre-up",
"state": "present",
"value": "XXXX_ipv6"
}

@ -0,0 +1,18 @@
{
"eth0": {
"address_family": "inet",
"down": [],
"method": "dhcp",
"post-up": [],
"pre-up": [],
"up": []
},
"lo": {
"address_family": "inet",
"down": [],
"method": "loopback",
"post-up": [],
"pre-up": [],
"up": []
}
}

@ -0,0 +1,58 @@
auto aggi
iface aggi inet static
hwaddress ether 22:44:77:88:D5:96
address 10.44.15.196
netmask 255.255.255.248
mtu 1500
slaves int1 int2
bond_mode 4
bond_miimon 100
bond_downdelay 200
bond_updelay 200
bond_lacp_rate slow
bond_xmit_hash_policy layer3+4
post-up /sbin/ethtool -K aggi tx off tso off
auto agge
iface agge inet manual
auto br0
iface br0 inet static
bridge_ports agge
hwaddress ether 22:44:77:88:D5:98
address 188.44.133.76
netmask 255.255.255.248
gateway 188.44.133.75
slaves ext1 ext2
bond_mode 4
bond_miimon 100
bond_downdelay 200
bond_updelay 200
bond_lacp_rate slow
bond_xmit_hash_policy layer3+4
post-up /sbin/ethtool -K agge tx off tso off
up route add -net 10.0.0.0/8 gw 10.44.15.117 dev aggi
up route add -net 192.168.0.0/16 gw 10.44.15.117 dev aggi
up route add -net 188.44.208.0/21 gw 10.44.15.117 dev aggi
auto int1
iface int1 inet manual
bond-master aggi
auto int2
iface int2 inet manual
bond-master aggi
auto ext1
iface ext1 inet manual
bond-master agge
auto ext2
iface ext2 inet manual
bond-master agge
auto lo
iface lo inet loopback
source /etc/network/interfaces.d/*.cfg

@ -0,0 +1,9 @@
fail_json message: Error: interface eth0 not found
options:
{
"address_family": "inet",
"iface": "eth0",
"option": "post-up",
"state": "present",
"value": "XXXX_ipv4"
}

@ -0,0 +1,101 @@
{
"agge": {
"address_family": "inet",
"down": [],
"method": "manual",
"post-up": [],
"pre-up": [],
"up": []
},
"aggi": {
"address": "10.44.15.196",
"address_family": "inet",
"bond_downdelay": "200",
"bond_lacp_rate": "slow",
"bond_miimon": "100",
"bond_mode": "4",
"bond_updelay": "200",
"bond_xmit_hash_policy": "layer3+4",
"down": [],
"hwaddress": "ether 22:44:77:88:D5:96",
"method": "static",
"mtu": "1500",
"netmask": "255.255.255.248",
"post-up": [
"/sbin/ethtool -K aggi tx off tso off"
],
"pre-up": [],
"slaves": "int1 int2",
"up": []
},
"br0": {
"address": "188.44.133.76",
"address_family": "inet",
"bond_downdelay": "200",
"bond_lacp_rate": "slow",
"bond_miimon": "100",
"bond_mode": "4",
"bond_updelay": "200",
"bond_xmit_hash_policy": "layer3+4",
"bridge_ports": "agge",
"down": [],
"gateway": "188.44.133.75",
"hwaddress": "ether 22:44:77:88:D5:98",
"method": "static",
"netmask": "255.255.255.248",
"post-up": [
"/sbin/ethtool -K agge tx off tso off"
],
"pre-up": [],
"slaves": "ext1 ext2",
"up": [
"route add -net 10.0.0.0/8 gw 10.44.15.117 dev aggi",
"route add -net 192.168.0.0/16 gw 10.44.15.117 dev aggi",
"route add -net 188.44.208.0/21 gw 10.44.15.117 dev aggi"
]
},
"ext1": {
"address_family": "inet",
"bond-master": "agge",
"down": [],
"method": "manual",
"post-up": [],
"pre-up": [],
"up": []
},
"ext2": {
"address_family": "inet",
"bond-master": "agge",
"down": [],
"method": "manual",
"post-up": [],
"pre-up": [],
"up": []
},
"int1": {
"address_family": "inet",
"bond-master": "aggi",
"down": [],
"method": "manual",
"post-up": [],
"pre-up": [],
"up": []
},
"int2": {
"address_family": "inet",
"bond-master": "aggi",
"down": [],
"method": "manual",
"post-up": [],
"pre-up": [],
"up": []
},
"lo": {
"address_family": "inet",
"down": [],
"method": "loopback",
"post-up": [],
"pre-up": [],
"up": []
}
}

@ -0,0 +1,58 @@
auto aggi
iface aggi inet static
hwaddress ether 22:44:77:88:D5:96
address 10.44.15.196
netmask 255.255.255.248
mtu 1500
slaves int1 int2
bond_mode 4
bond_miimon 100
bond_downdelay 200
bond_updelay 200
bond_lacp_rate slow
bond_xmit_hash_policy layer3+4
post-up /sbin/ethtool -K aggi tx off tso off
auto agge
iface agge inet manual
auto br0
iface br0 inet static
bridge_ports agge
hwaddress ether 22:44:77:88:D5:98
address 188.44.133.76
netmask 255.255.255.248
gateway 188.44.133.75
slaves ext1 ext2
bond_mode 4
bond_miimon 100
bond_downdelay 200
bond_updelay 200
bond_lacp_rate slow
bond_xmit_hash_policy layer3+4
post-up /sbin/ethtool -K agge tx off tso off
up route add -net 10.0.0.0/8 gw 10.44.15.117 dev aggi
up route add -net 192.168.0.0/16 gw 10.44.15.117 dev aggi
up route add -net 188.44.208.0/21 gw 10.44.15.117 dev aggi
auto int1
iface int1 inet manual
bond-master aggi
auto int2
iface int2 inet manual
bond-master aggi
auto ext1
iface ext1 inet manual
bond-master agge
auto ext2
iface ext2 inet manual
bond-master agge
auto lo
iface lo inet loopback
source /etc/network/interfaces.d/*.cfg

@ -0,0 +1,9 @@
fail_json message: Error: interface eth0 not found
options:
{
"address_family": "inet",
"iface": "eth0",
"option": "pre-up",
"state": "present",
"value": "XXXX_ipv4"
}

@ -0,0 +1,101 @@
{
"agge": {
"address_family": "inet",
"down": [],
"method": "manual",
"post-up": [],
"pre-up": [],
"up": []
},
"aggi": {
"address": "10.44.15.196",
"address_family": "inet",
"bond_downdelay": "200",
"bond_lacp_rate": "slow",
"bond_miimon": "100",
"bond_mode": "4",
"bond_updelay": "200",
"bond_xmit_hash_policy": "layer3+4",
"down": [],
"hwaddress": "ether 22:44:77:88:D5:96",
"method": "static",
"mtu": "1500",
"netmask": "255.255.255.248",
"post-up": [
"/sbin/ethtool -K aggi tx off tso off"
],
"pre-up": [],
"slaves": "int1 int2",
"up": []
},
"br0": {
"address": "188.44.133.76",
"address_family": "inet",
"bond_downdelay": "200",
"bond_lacp_rate": "slow",
"bond_miimon": "100",
"bond_mode": "4",
"bond_updelay": "200",
"bond_xmit_hash_policy": "layer3+4",
"bridge_ports": "agge",
"down": [],
"gateway": "188.44.133.75",
"hwaddress": "ether 22:44:77:88:D5:98",
"method": "static",
"netmask": "255.255.255.248",
"post-up": [
"/sbin/ethtool -K agge tx off tso off"
],
"pre-up": [],
"slaves": "ext1 ext2",
"up": [
"route add -net 10.0.0.0/8 gw 10.44.15.117 dev aggi",
"route add -net 192.168.0.0/16 gw 10.44.15.117 dev aggi",
"route add -net 188.44.208.0/21 gw 10.44.15.117 dev aggi"
]
},
"ext1": {
"address_family": "inet",
"bond-master": "agge",
"down": [],
"method": "manual",
"post-up": [],
"pre-up": [],
"up": []
},
"ext2": {
"address_family": "inet",
"bond-master": "agge",
"down": [],
"method": "manual",
"post-up": [],
"pre-up": [],
"up": []
},
"int1": {
"address_family": "inet",
"bond-master": "aggi",
"down": [],
"method": "manual",
"post-up": [],
"pre-up": [],
"up": []
},
"int2": {
"address_family": "inet",
"bond-master": "aggi",
"down": [],
"method": "manual",
"post-up": [],
"pre-up": [],
"up": []
},
"lo": {
"address_family": "inet",
"down": [],
"method": "loopback",
"post-up": [],
"pre-up": [],
"up": []
}
}

@ -0,0 +1,58 @@
auto aggi
iface aggi inet static
hwaddress ether 22:44:77:88:D5:96
address 10.44.15.196
netmask 255.255.255.248
mtu 1500
slaves int1 int2
bond_mode 4
bond_miimon 100
bond_downdelay 200
bond_updelay 200
bond_lacp_rate slow
bond_xmit_hash_policy layer3+4
post-up /sbin/ethtool -K aggi tx off tso off
auto agge
iface agge inet manual
auto br0
iface br0 inet static
bridge_ports agge
hwaddress ether 22:44:77:88:D5:98
address 188.44.133.76
netmask 255.255.255.248
gateway 188.44.133.75
slaves ext1 ext2
bond_mode 4
bond_miimon 100
bond_downdelay 200
bond_updelay 200
bond_lacp_rate slow
bond_xmit_hash_policy layer3+4
post-up /sbin/ethtool -K agge tx off tso off
up route add -net 10.0.0.0/8 gw 10.44.15.117 dev aggi
up route add -net 192.168.0.0/16 gw 10.44.15.117 dev aggi
up route add -net 188.44.208.0/21 gw 10.44.15.117 dev aggi
auto int1
iface int1 inet manual
bond-master aggi
auto int2
iface int2 inet manual
bond-master aggi
auto ext1
iface ext1 inet manual
bond-master agge
auto ext2
iface ext2 inet manual
bond-master agge
auto lo
iface lo inet loopback
source /etc/network/interfaces.d/*.cfg

@ -0,0 +1,9 @@
fail_json message: Error: interface eth0 not found
options:
{
"address_family": "inet6",
"iface": "eth0",
"option": "post-up",
"state": "present",
"value": "XXXX_ipv6"
}

@ -0,0 +1,101 @@
{
"agge": {
"address_family": "inet",
"down": [],
"method": "manual",
"post-up": [],
"pre-up": [],
"up": []
},
"aggi": {
"address": "10.44.15.196",
"address_family": "inet",
"bond_downdelay": "200",
"bond_lacp_rate": "slow",
"bond_miimon": "100",
"bond_mode": "4",
"bond_updelay": "200",
"bond_xmit_hash_policy": "layer3+4",
"down": [],
"hwaddress": "ether 22:44:77:88:D5:96",
"method": "static",
"mtu": "1500",
"netmask": "255.255.255.248",
"post-up": [
"/sbin/ethtool -K aggi tx off tso off"
],
"pre-up": [],
"slaves": "int1 int2",
"up": []
},
"br0": {
"address": "188.44.133.76",
"address_family": "inet",
"bond_downdelay": "200",
"bond_lacp_rate": "slow",
"bond_miimon": "100",
"bond_mode": "4",
"bond_updelay": "200",
"bond_xmit_hash_policy": "layer3+4",
"bridge_ports": "agge",
"down": [],
"gateway": "188.44.133.75",
"hwaddress": "ether 22:44:77:88:D5:98",
"method": "static",
"netmask": "255.255.255.248",
"post-up": [
"/sbin/ethtool -K agge tx off tso off"
],
"pre-up": [],
"slaves": "ext1 ext2",
"up": [
"route add -net 10.0.0.0/8 gw 10.44.15.117 dev aggi",
"route add -net 192.168.0.0/16 gw 10.44.15.117 dev aggi",
"route add -net 188.44.208.0/21 gw 10.44.15.117 dev aggi"
]
},
"ext1": {
"address_family": "inet",
"bond-master": "agge",
"down": [],
"method": "manual",
"post-up": [],
"pre-up": [],
"up": []
},
"ext2": {
"address_family": "inet",
"bond-master": "agge",
"down": [],
"method": "manual",
"post-up": [],
"pre-up": [],
"up": []
},
"int1": {
"address_family": "inet",
"bond-master": "aggi",
"down": [],
"method": "manual",
"post-up": [],
"pre-up": [],
"up": []
},
"int2": {
"address_family": "inet",
"bond-master": "aggi",
"down": [],
"method": "manual",
"post-up": [],
"pre-up": [],
"up": []
},
"lo": {
"address_family": "inet",
"down": [],
"method": "loopback",
"post-up": [],
"pre-up": [],
"up": []
}
}

@ -0,0 +1,58 @@
auto aggi
iface aggi inet static
hwaddress ether 22:44:77:88:D5:96
address 10.44.15.196
netmask 255.255.255.248
mtu 1500
slaves int1 int2
bond_mode 4
bond_miimon 100
bond_downdelay 200
bond_updelay 200
bond_lacp_rate slow
bond_xmit_hash_policy layer3+4
post-up /sbin/ethtool -K aggi tx off tso off
auto agge
iface agge inet manual
auto br0
iface br0 inet static
bridge_ports agge
hwaddress ether 22:44:77:88:D5:98
address 188.44.133.76
netmask 255.255.255.248
gateway 188.44.133.75
slaves ext1 ext2
bond_mode 4
bond_miimon 100
bond_downdelay 200
bond_updelay 200
bond_lacp_rate slow
bond_xmit_hash_policy layer3+4
post-up /sbin/ethtool -K agge tx off tso off
up route add -net 10.0.0.0/8 gw 10.44.15.117 dev aggi
up route add -net 192.168.0.0/16 gw 10.44.15.117 dev aggi
up route add -net 188.44.208.0/21 gw 10.44.15.117 dev aggi
auto int1
iface int1 inet manual
bond-master aggi
auto int2
iface int2 inet manual
bond-master aggi
auto ext1
iface ext1 inet manual
bond-master agge
auto ext2
iface ext2 inet manual
bond-master agge
auto lo
iface lo inet loopback
source /etc/network/interfaces.d/*.cfg

@ -0,0 +1,9 @@
fail_json message: Error: interface eth0 not found
options:
{
"address_family": "inet6",
"iface": "eth0",
"option": "pre-up",
"state": "present",
"value": "XXXX_ipv6"
}

@ -0,0 +1,101 @@
{
"agge": {
"address_family": "inet",
"down": [],
"method": "manual",
"post-up": [],
"pre-up": [],
"up": []
},
"aggi": {
"address": "10.44.15.196",
"address_family": "inet",
"bond_downdelay": "200",
"bond_lacp_rate": "slow",
"bond_miimon": "100",
"bond_mode": "4",
"bond_updelay": "200",
"bond_xmit_hash_policy": "layer3+4",
"down": [],
"hwaddress": "ether 22:44:77:88:D5:96",
"method": "static",
"mtu": "1500",
"netmask": "255.255.255.248",
"post-up": [
"/sbin/ethtool -K aggi tx off tso off"
],
"pre-up": [],
"slaves": "int1 int2",
"up": []
},
"br0": {
"address": "188.44.133.76",
"address_family": "inet",
"bond_downdelay": "200",
"bond_lacp_rate": "slow",
"bond_miimon": "100",
"bond_mode": "4",
"bond_updelay": "200",
"bond_xmit_hash_policy": "layer3+4",
"bridge_ports": "agge",
"down": [],
"gateway": "188.44.133.75",
"hwaddress": "ether 22:44:77:88:D5:98",
"method": "static",
"netmask": "255.255.255.248",
"post-up": [
"/sbin/ethtool -K agge tx off tso off"
],
"pre-up": [],
"slaves": "ext1 ext2",
"up": [
"route add -net 10.0.0.0/8 gw 10.44.15.117 dev aggi",
"route add -net 192.168.0.0/16 gw 10.44.15.117 dev aggi",
"route add -net 188.44.208.0/21 gw 10.44.15.117 dev aggi"
]
},
"ext1": {
"address_family": "inet",
"bond-master": "agge",
"down": [],
"method": "manual",
"post-up": [],
"pre-up": [],
"up": []
},
"ext2": {
"address_family": "inet",
"bond-master": "agge",
"down": [],
"method": "manual",
"post-up": [],
"pre-up": [],
"up": []
},
"int1": {
"address_family": "inet",
"bond-master": "aggi",
"down": [],
"method": "manual",
"post-up": [],
"pre-up": [],
"up": []
},
"int2": {
"address_family": "inet",
"bond-master": "aggi",
"down": [],
"method": "manual",
"post-up": [],
"pre-up": [],
"up": []
},
"lo": {
"address_family": "inet",
"down": [],
"method": "loopback",
"post-up": [],
"pre-up": [],
"up": []
}
}

@ -5,6 +5,8 @@ iface lo inet loopback
# The primary network interface
iface eth0 inet static
address 192.168.0.1
post-up echo configuring ipv4
iface eth0 inet6 static
address fc00::1
post-up echo configuring ipv6

@ -230,7 +230,7 @@ class TestInterfacesFileModule(unittest.TestCase):
# Restore backup
move(backupp, path)
def test_change_address(self):
def test_inet_inet6(self):
testcases = {
"change_ipv4": [
{
@ -250,6 +250,42 @@ class TestInterfacesFileModule(unittest.TestCase):
'state': 'present',
}
],
"change_ipv4_pre_up": [
{
'iface': 'eth0',
'address_family': 'inet',
'option': 'pre-up',
'value': 'XXXX_ipv4',
'state': 'present',
}
],
"change_ipv6_pre_up": [
{
'iface': 'eth0',
'address_family': 'inet6',
'option': 'pre-up',
'value': 'XXXX_ipv6',
'state': 'present',
}
],
"change_ipv4_post_up": [
{
'iface': 'eth0',
'address_family': 'inet',
'option': 'post-up',
'value': 'XXXX_ipv4',
'state': 'present',
}
],
"change_ipv6_post_up": [
{
'iface': 'eth0',
'address_family': 'inet6',
'option': 'post-up',
'value': 'XXXX_ipv6',
'state': 'present',
}
],
}
for testname, options_list in testcases.items():
for testfile in self.getTestFiles():

Loading…
Cancel
Save