@ -25,6 +25,7 @@ module: nmcli
author : Chris Long
short_description : Manage Networking
requirements : [ nmcli , dbus ]
version_added : " 2.0 "
description :
- Manage the network devices . Create , modify , and manage , ethernet , teams , bonds , vlans etc .
options :
@ -39,11 +40,11 @@ options:
choices : [ " yes " , " no " ]
description :
- Whether the connection should start on boot .
- Whether the connection profile can be automatically activated ( default : yes )
- Whether the connection profile can be automatically activated
conn_name :
required : True
description :
- Where conn_name will be the name used to call the connection . when not provided a default name is generated : < type > [ - < ifname > ] [ - < num > ]
- ' Where conn_name will be the name used to call the connection. when not provided a default name is generated: <type>[-<ifname>][-<num>] '
ifname :
required : False
default : conn_name
@ -60,9 +61,9 @@ options:
mode :
required : False
choices : [ " balance-rr " , " active-backup " , " balance-xor " , " broadcast " , " 802.3ad " , " balance-tlb " , " balance-alb " ]
default : None
default : balence - rr
description :
- This is the type of device or network connection that you wish to create for a bond , team or bridge . ( NetworkManager default : balance - rr )
- This is the type of device or network connection that you wish to create for a bond , team or bridge .
master :
required : False
default : None
@ -72,35 +73,35 @@ options:
required : False
default : None
description :
- The IPv4 address to this interface using this format ie : " 192.168.1.24/24 "
- ' The IPv4 address to this interface using this format ie: " 192.168.1.24/24 " '
gw4 :
required : False
description :
- The IPv4 gateway for this interface using this format ie : " 192.168.100.1 "
- ' The IPv4 gateway for this interface using this format ie: " 192.168.100.1 " '
dns4 :
required : False
default : None
description :
- A list of upto 3 dns servers , ipv4 format e . g . To add two IPv4 DNS server addresses : [ ' " 8.8.8.8 8.8.4.4 " ' ]
- ' A list of upto 3 dns servers, ipv4 format e.g. To add two IPv4 DNS server addresses: [ " 8.8.8.8 8.8.4.4 " '
ip6 :
required : False
default : None
description :
- The IPv6 address to this interface using this format ie : " abbe::cafe "
- ' The IPv6 address to this interface using this format ie: " abbe::cafe " '
gw6 :
required : False
default : None
description :
- The IPv6 gateway for this interface using this format ie : " 2001:db8::1 "
- ' The IPv6 gateway for this interface using this format ie: " 2001:db8::1 " '
dns6 :
required : False
description :
- A list of upto 3 dns servers , ipv6 format e . g . To add two IPv6 DNS server addresses : [ ' " 2001:4860:4860::8888 2001:4860:4860::8844 " ' ]
- ' A list of upto 3 dns servers, ipv6 format e.g. To add two IPv6 DNS server addresses: [ " 2001:4860:4860::8888 2001:4860:4860::8844 " '
mtu :
required : False
default : None
default : 1500
description :
- The connection MTU , e . g . 9000. This can ' t be applied when creating the interface and is done once the interface has been created. (NetworkManager default: 1500)
- The connection MTU , e . g . 9000. This can ' t be applied when creating the interface and is done once the interface has been created.
- Can be used when modifying Team , VLAN , Ethernet ( Future plans to implement wifi , pppoe , infiniband )
primary :
required : False
@ -109,24 +110,24 @@ options:
- This is only used with bond and is the primary interface name ( for " active-backup " mode ) , this is the usually the ' ifname '
miimon :
required : False
default : None
default : 100
description :
- This is only used with bond - miimon ( NetworkManager default : 100 )
- This is only used with bond - miimon
downdelay :
required : False
default : None
description :
- This is only used with bond - downdelay ( NetworkManager default : 0 )
- This is only used with bond - downdelay
updelay :
required : False
default : None
description :
- This is only used with bond - updelay ( NetworkManager default : 0 )
- This is only used with bond - updelay
arp_interval :
required : False
default : None
description :
- This is only used with bond - ARP interval ( NetworkManager default : 0 )
- This is only used with bond - ARP interval
arp_ip_target :
required : False
default : None
@ -139,49 +140,49 @@ options:
- This is only used with bridge and controls whether Spanning Tree Protocol ( STP ) is enabled for this bridge
priority :
required : False
default : None
default : 128
description :
- This is only used with ' bridge ' - sets STP priority ( NetworkManager default : 128 )
- This is only used with ' bridge ' - sets STP priority
forwarddelay :
required : False
default : None
default : 15
description :
- This is only used with bridge - [ forward - delay < 2 - 30 > ] STP forwarding delay , in seconds ( NetworkManager default : 15 )
- This is only used with bridge - [ forward - delay < 2 - 30 > ] STP forwarding delay , in seconds
hellotime :
required : False
default : None
default : 2
description :
- This is only used with bridge - [ hello - time < 1 - 10 > ] STP hello time , in seconds ( NetworkManager default : 2 )
- This is only used with bridge - [ hello - time < 1 - 10 > ] STP hello time , in seconds
maxage :
required : False
default : None
default : 20
description :
- This is only used with bridge - [ max - age < 6 - 42 > ] STP maximum message age , in seconds ( NetworkManager default : 20 )
- This is only used with bridge - [ max - age < 6 - 42 > ] STP maximum message age , in seconds
ageingtime :
required : False
default : None
default : 300
description :
- This is only used with bridge - [ ageing - time < 0 - 1000000 > ] the Ethernet MAC address aging time , in seconds ( NetworkManager default : 300 )
- This is only used with bridge - [ ageing - time < 0 - 1000000 > ] the Ethernet MAC address aging time , in seconds
mac :
required : False
default : None
description :
- This is only used with bridge - MAC address of the bridge ( note : this requires a recent kernel feature , originally introduced in 3.15 upstream kernel )
- ' This is only used with bridge - MAC address of the bridge (note: this requires a recent kernel feature, originally introduced in 3.15 upstream kernel) '
slavepriority :
required : False
default : None
default : 32
description :
- This is only used with ' bridge-slave ' - [ < 0 - 63 > ] - STP priority of this slave ( default : 32 )
- This is only used with ' bridge-slave ' - [ < 0 - 63 > ] - STP priority of this slave
path_cost :
required : False
default : None
default : 100
description :
- This is only used with ' bridge-slave ' - [ < 1 - 65535 > ] - STP port cost for destinations via this slave ( NetworkManager default : 100 )
- This is only used with ' bridge-slave ' - [ < 1 - 65535 > ] - STP port cost for destinations via this slave
hairpin :
required : False
default : None
default : yes
description :
- This is only used with ' bridge-slave ' - ' hairpin mode ' for the slave , which allows frames to be sent back out through the slave the frame was received on . ( NetworkManager default : yes )
- This is only used with ' bridge-slave ' - ' hairpin mode ' for the slave , which allows frames to be sent back out through the slave the frame was received on .
vlanid :
required : False
default : None
Brian Coca
10 years ago