Backport/2.9/64347 Doc notes 2 (#64347) (#64946)

* Doc notes 2 (#64347) 
* Update ce_evpn_bgp_rr.py
* Update ce_evpn_bgp.py

(cherry picked from commit 9e3b1f3b32)

* add a change log

changelogs/fragments/64946_update_modules_docs_notes.yml

@@ -0,0 +1,3 @@
+---
+bugfixes:
+  - ce modules - Update(add) docs notes to tell user modules work connection.

lib/ansible/modules/network/cloudengine/ce_bgp_neighbor.py

@@ -29,6 +29,10 @@ description:
     - Manages BGP peer configurations on HUAWEI CloudEngine switches.
 author:
     - wangdezhuang (@QijunPan)
+notes:
+  - This module requires the netconf system service be enabled on the remote device being managed.
+  - Recommended connection is C(netconf).
+  - This module also works with C(local) connections for legacy playbooks.
 options:
     state:
         description:

lib/ansible/modules/network/cloudengine/ce_bgp_neighbor_af.py

@@ -29,6 +29,10 @@ description:
     - Manages BGP neighbor Address-family configurations on HUAWEI CloudEngine switches.
 author:
     - wangdezhuang (@QijunPan)
+notes:
+    - This module requires the netconf system service be enabled on the remote device being managed.
+    - Recommended connection is C(netconf).
+    - This module also works with C(local) connections for legacy playbooks.
 options:
     vrf_name:
         description:

lib/ansible/modules/network/cloudengine/ce_command.py

@@ -34,6 +34,9 @@ description:
     the results read from the device.  The ce_command module includes an
     argument that will cause the module to wait for a specific condition
     before returning or timing out if the condition is not met.
+notes:
+  - Recommended connection is C(network_cli).
+  - This module also works with C(local) connections for legacy playbooks.
 options:
   commands:
     description:

lib/ansible/modules/network/cloudengine/ce_config.py

@@ -31,6 +31,9 @@ description:
     for segmenting configuration into sections.  This module provides
     an implementation for working with CloudEngine configuration sections in
     a deterministic way.  This module works with CLI transports.
+notes:
+  - Recommended connection is C(network_cli).
+  - This module also works with C(local) connections for legacy playbooks.
 options:
   lines:
     description:

lib/ansible/modules/network/cloudengine/ce_dldp.py

@@ -38,6 +38,9 @@ notes:
       DLDP working mode.
     - The default interval for sending Advertisement packets is 5 seconds, so you are advised to use time_interval=5 to
       restore default DLDP interval.
+    - This module requires the netconf system service be enabled on the remote device being managed.
+    - Recommended connection is C(netconf).
+    - This module also works with C(local) connections for legacy playbooks.
 options:
     enable:
         description:

lib/ansible/modules/network/cloudengine/ce_dldp_interface.py

@@ -34,6 +34,9 @@ notes:
     - If C(state=present, enable=disable), interface DLDP enable will be turned off and
       related interface DLDP configuration will be cleared.
     - If C(state=absent), only local_mac is supported to configure.
+    - This module requires the netconf system service be enabled on the remote device being managed.
+    - Recommended connection is C(netconf).
+    - This module also works with C(local) connections for legacy playbooks.
 options:
     interface:
         description:

lib/ansible/modules/network/cloudengine/ce_eth_trunk.py

@@ -34,6 +34,9 @@ notes:
       passed, all existing members (if any), are removed,
       and Eth-Trunk removed.
     - Members must be a list.
+    - This module requires the netconf system service be enabled on the remote device being managed.
+    - Recommended connection is C(netconf).
+    - This module also works with C(local) connections for legacy playbooks.
 options:
     trunk_id:
         description:

lib/ansible/modules/network/cloudengine/ce_evpn_bd_vni.py

@@ -42,6 +42,9 @@ notes:
     - When using state:absent, evpn is not supported and it will be ignored.
     - When using state:absent to delete VPN target attributes, ensure the configuration of VPN target attributes has
       existed and otherwise it will report an error.
+    - This module requires the netconf system service be enabled on the remote device being managed.
+    - Recommended connection is C(netconf).
+    - This module also works with C(local) connections for legacy playbooks.
 options:
     bridge_domain_id:
         description:

lib/ansible/modules/network/cloudengine/ce_evpn_bgp.py

@@ -28,6 +28,9 @@ description:
     - This module offers the ability to configure a BGP EVPN peer relationship on HUAWEI CloudEngine switches.
 author:
     - Li Yanfeng (@QijunPan)
+notes:
+  - Recommended connection is C(network_cli).
+  - This module also works with C(local) connections for legacy playbooks.
 options:
     bgp_instance:
         description:

lib/ansible/modules/network/cloudengine/ce_evpn_bgp_rr.py

@@ -31,6 +31,8 @@ author: Zhijin Zhou (@QijunPan)
 notes:
     - Ensure that BGP view is existed.
     - The peer, peer_type, and reflect_client arguments must all exist or not exist.
+    - Recommended connection is C(network_cli).
+    - This module also works with C(local) connections for legacy playbooks.
 options:
     as_number:
         description: