You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tt-rss/vendor/thecodingmachine/safe/generated/stream.php

610 lines
19 KiB
PHP

<?php
namespace Safe;
use Safe\Exceptions\StreamException;
/**
* Sets parameters on the specified context.
*
* @param resource $stream_or_context The stream or context to apply the parameters too.
* @param array $params An array of parameters to set.
*
* params should be an associative array of the structure:
* $params['paramname'] = "paramvalue";.
* @throws StreamException
*
*/
function stream_context_set_params($stream_or_context, array $params): void
{
error_clear_last();
$result = \stream_context_set_params($stream_or_context, $params);
if ($result === false) {
throw StreamException::createFromPhpError();
}
}
/**
* Makes a copy of up to maxlength bytes
* of data from the current position (or from the
* offset position, if specified) in
* source to dest. If
* maxlength is not specified, all remaining content in
* source will be copied.
*
* @param resource $source The source stream
* @param resource $dest The destination stream
* @param int $maxlength Maximum bytes to copy
* @param int $offset The offset where to start to copy data
* @return int Returns the total count of bytes copied.
* @throws StreamException
*
*/
function stream_copy_to_stream($source, $dest, int $maxlength = -1, int $offset = 0): int
{
error_clear_last();
$result = \stream_copy_to_stream($source, $dest, $maxlength, $offset);
if ($result === false) {
throw StreamException::createFromPhpError();
}
return $result;
}
/**
* Adds filtername to the list of filters
* attached to stream.
*
* @param resource $stream The target stream.
* @param string $filtername The filter name.
* @param int $read_write By default, stream_filter_append will
* attach the filter to the read filter chain
* if the file was opened for reading (i.e. File Mode:
* r, and/or +). The filter
* will also be attached to the write filter chain
* if the file was opened for writing (i.e. File Mode:
* w, a, and/or +).
* STREAM_FILTER_READ,
* STREAM_FILTER_WRITE, and/or
* STREAM_FILTER_ALL can also be passed to the
* read_write parameter to override this behavior.
* @param mixed $params This filter will be added with the specified
* params to the end of
* the list and will therefore be called last during stream operations.
* To add a filter to the beginning of the list, use
* stream_filter_prepend.
* @return resource Returns a resource on success. The resource can be
* used to refer to this filter instance during a call to
* stream_filter_remove.
*
* FALSE is returned if stream is not a resource or
* if filtername cannot be located.
* @throws StreamException
*
*/
function stream_filter_append($stream, string $filtername, int $read_write = null, $params = null)
{
error_clear_last();
if ($params !== null) {
$result = \stream_filter_append($stream, $filtername, $read_write, $params);
} elseif ($read_write !== null) {
$result = \stream_filter_append($stream, $filtername, $read_write);
} else {
$result = \stream_filter_append($stream, $filtername);
}
if ($result === false) {
throw StreamException::createFromPhpError();
}
return $result;
}
/**
* Adds filtername to the list of filters
* attached to stream.
*
* @param resource $stream The target stream.
* @param string $filtername The filter name.
* @param int $read_write By default, stream_filter_prepend will
* attach the filter to the read filter chain
* if the file was opened for reading (i.e. File Mode:
* r, and/or +). The filter
* will also be attached to the write filter chain
* if the file was opened for writing (i.e. File Mode:
* w, a, and/or +).
* STREAM_FILTER_READ,
* STREAM_FILTER_WRITE, and/or
* STREAM_FILTER_ALL can also be passed to the
* read_write parameter to override this behavior.
* See stream_filter_append for an example of
* using this parameter.
* @param mixed $params This filter will be added with the specified params
* to the beginning of the list and will therefore be
* called first during stream operations. To add a filter to the end of the
* list, use stream_filter_append.
* @return resource Returns a resource on success. The resource can be
* used to refer to this filter instance during a call to
* stream_filter_remove.
*
* FALSE is returned if stream is not a resource or
* if filtername cannot be located.
* @throws StreamException
*
*/
function stream_filter_prepend($stream, string $filtername, int $read_write = null, $params = null)
{
error_clear_last();
if ($params !== null) {
$result = \stream_filter_prepend($stream, $filtername, $read_write, $params);
} elseif ($read_write !== null) {
$result = \stream_filter_prepend($stream, $filtername, $read_write);
} else {
$result = \stream_filter_prepend($stream, $filtername);
}
if ($result === false) {
throw StreamException::createFromPhpError();
}
return $result;
}
/**
* stream_filter_register allows you to implement
* your own filter on any registered stream used with all the other
* filesystem functions (such as fopen,
* fread etc.).
*
* @param string $filtername The filter name to be registered.
* @param string $classname To implement a filter, you need to define a class as an extension of
* php_user_filter with a number of member
* functions. When performing read/write operations on the stream
* to which your filter is attached, PHP will pass the data through your
* filter (and any other filters attached to that stream) so that the
* data may be modified as desired. You must implement the methods
* exactly as described in php_user_filter - doing
* otherwise will lead to undefined behaviour.
* @throws StreamException
*
*/
function stream_filter_register(string $filtername, string $classname): void
{
error_clear_last();
$result = \stream_filter_register($filtername, $classname);
if ($result === false) {
throw StreamException::createFromPhpError();
}
}
/**
* Removes a stream filter previously added to a stream with
* stream_filter_prepend or
* stream_filter_append. Any data remaining in the
* filter's internal buffer will be flushed through to the next filter before
* removing it.
*
* @param resource $stream_filter The stream filter to be removed.
* @throws StreamException
*
*/
function stream_filter_remove($stream_filter): void
{
error_clear_last();
$result = \stream_filter_remove($stream_filter);
if ($result === false) {
throw StreamException::createFromPhpError();
}
}
/**
* Identical to file_get_contents, except that
* stream_get_contents operates on an already open
* stream resource and returns the remaining contents in a string, up to
* maxlength bytes and starting at the specified
* offset.
*
* @param resource $handle A stream resource (e.g. returned from fopen)
* @param int $maxlength The maximum bytes to read. Defaults to -1 (read all the remaining
* buffer).
* @param int $offset Seek to the specified offset before reading. If this number is negative,
* no seeking will occur and reading will start from the current position.
* @return string Returns a string.
* @throws StreamException
*
*/
function stream_get_contents($handle, int $maxlength = -1, int $offset = -1): string
{
error_clear_last();
$result = \stream_get_contents($handle, $maxlength, $offset);
if ($result === false) {
throw StreamException::createFromPhpError();
}
return $result;
}
/**
* Determines if stream stream refers to a valid terminal type device.
* This is a more portable version of posix_isatty, since it works on Windows systems too.
*
* @param resource $stream
* @throws StreamException
*
*/
function stream_isatty($stream): void
{
error_clear_last();
$result = \stream_isatty($stream);
if ($result === false) {
throw StreamException::createFromPhpError();
}
}
/**
* Resolve filename against the include path according to the same rules as fopen/include.
*
* @param string $filename The filename to resolve.
* @return string Returns a string containing the resolved absolute filename.
* @throws StreamException
*
*/
function stream_resolve_include_path(string $filename): string
{
error_clear_last();
$result = \stream_resolve_include_path($filename);
if ($result === false) {
throw StreamException::createFromPhpError();
}
return $result;
}
/**
* Sets blocking or non-blocking mode on a stream.
*
* This function works for any stream that supports non-blocking mode
* (currently, regular files and socket streams).
*
* @param resource $stream The stream.
* @param bool $mode If mode is FALSE, the given stream
* will be switched to non-blocking mode, and if TRUE, it
* will be switched to blocking mode. This affects calls like
* fgets and fread
* that read from the stream. In non-blocking mode an
* fgets call will always return right away
* while in blocking mode it will wait for data to become available
* on the stream.
* @throws StreamException
*
*/
function stream_set_blocking($stream, bool $mode): void
{
error_clear_last();
$result = \stream_set_blocking($stream, $mode);
if ($result === false) {
throw StreamException::createFromPhpError();
}
}
/**
* Sets the timeout value on stream,
* expressed in the sum of seconds and
* microseconds.
*
* When the stream times out, the 'timed_out' key of the array returned by
* stream_get_meta_data is set to TRUE, although no
* error/warning is generated.
*
* @param resource $stream The target stream.
* @param int $seconds The seconds part of the timeout to be set.
* @param int $microseconds The microseconds part of the timeout to be set.
* @throws StreamException
*
*/
function stream_set_timeout($stream, int $seconds, int $microseconds = 0): void
{
error_clear_last();
$result = \stream_set_timeout($stream, $seconds, $microseconds);
if ($result === false) {
throw StreamException::createFromPhpError();
}
}
/**
* Accept a connection on a socket previously created by
* stream_socket_server.
*
* @param resource $server_socket The server socket to accept a connection from.
* @param float $timeout Override the default socket accept timeout. Time should be given in
* seconds.
* @param string|null $peername Will be set to the name (address) of the client which connected, if
* included and available from the selected transport.
*
* Can also be determined later using
* stream_socket_get_name.
* @return resource Returns a stream to the accepted socket connection.
* @throws StreamException
*
*/
function stream_socket_accept($server_socket, float $timeout = null, ?string &$peername = null)
{
error_clear_last();
if ($peername !== null) {
$result = \stream_socket_accept($server_socket, $timeout, $peername);
} elseif ($timeout !== null) {
$result = \stream_socket_accept($server_socket, $timeout);
} else {
$result = \stream_socket_accept($server_socket);
}
if ($result === false) {
throw StreamException::createFromPhpError();
}
return $result;
}
/**
* Initiates a stream or datagram connection to the destination specified
* by remote_socket. The type of socket created
* is determined by the transport specified using standard URL formatting:
* transport://target. For Internet Domain sockets
* (AF_INET) such as TCP and UDP, the target portion
* of the remote_socket parameter should consist of
* a hostname or IP address followed by a colon and a port number. For Unix
* domain sockets, the target portion should point
* to the socket file on the filesystem.
*
* @param string $remote_socket Address to the socket to connect to.
* @param int $errno Will be set to the system level error number if connection fails.
* @param string $errstr Will be set to the system level error message if the connection fails.
* @param float $timeout Number of seconds until the connect() system call
* should timeout.
*
*
* This parameter only applies when not making asynchronous
* connection attempts.
*
*
*
*
* To set a timeout for reading/writing data over the socket, use the
* stream_set_timeout, as the
* timeout only applies while making connecting
* the socket.
*
*
*
* To set a timeout for reading/writing data over the socket, use the
* stream_set_timeout, as the
* timeout only applies while making connecting
* the socket.
* @param int $flags Bitmask field which may be set to any combination of connection flags.
* Currently the select of connection flags is limited to
* STREAM_CLIENT_CONNECT (default),
* STREAM_CLIENT_ASYNC_CONNECT and
* STREAM_CLIENT_PERSISTENT.
* @param resource $context A valid context resource created with stream_context_create.
* @return resource On success a stream resource is returned which may
* be used together with the other file functions (such as
* fgets, fgetss,
* fwrite, fclose, and
* feof), FALSE on failure.
* @throws StreamException
*
*/
function stream_socket_client(string $remote_socket, int &$errno = null, string &$errstr = null, float $timeout = null, int $flags = STREAM_CLIENT_CONNECT, $context = null)
{
error_clear_last();
if ($context !== null) {
$result = \stream_socket_client($remote_socket, $errno, $errstr, $timeout, $flags, $context);
} elseif ($flags !== STREAM_CLIENT_CONNECT) {
$result = \stream_socket_client($remote_socket, $errno, $errstr, $timeout, $flags);
} elseif ($timeout !== null) {
$result = \stream_socket_client($remote_socket, $errno, $errstr, $timeout);
} else {
$result = \stream_socket_client($remote_socket, $errno, $errstr);
}
if ($result === false) {
throw StreamException::createFromPhpError();
}
return $result;
}
/**
* stream_socket_pair creates a pair of connected,
* indistinguishable socket streams. This function is commonly used in IPC
* (Inter-Process Communication).
*
* @param int $domain The protocol family to be used: STREAM_PF_INET,
* STREAM_PF_INET6 or
* STREAM_PF_UNIX
* @param int $type The type of communication to be used:
* STREAM_SOCK_DGRAM,
* STREAM_SOCK_RAW,
* STREAM_SOCK_RDM,
* STREAM_SOCK_SEQPACKET or
* STREAM_SOCK_STREAM
* @param int $protocol The protocol to be used: STREAM_IPPROTO_ICMP,
* STREAM_IPPROTO_IP,
* STREAM_IPPROTO_RAW,
* STREAM_IPPROTO_TCP or
* STREAM_IPPROTO_UDP
* @return resource[] Returns an array with the two socket resources on success.
* @throws StreamException
*
*/
function stream_socket_pair(int $domain, int $type, int $protocol): iterable
{
error_clear_last();
$result = \stream_socket_pair($domain, $type, $protocol);
if ($result === false) {
throw StreamException::createFromPhpError();
}
return $result;
}
/**
* Creates a stream or datagram socket on the specified
* local_socket.
*
* This function only creates a socket, to begin accepting connections
* use stream_socket_accept.
*
* @param string $local_socket The type of socket created is determined by the transport specified
* using standard URL formatting: transport://target.
*
* For Internet Domain sockets (AF_INET) such as TCP and UDP, the
* target portion of the
* remote_socket parameter should consist of a
* hostname or IP address followed by a colon and a port number. For
* Unix domain sockets, the target portion should
* point to the socket file on the filesystem.
*
* Depending on the environment, Unix domain sockets may not be available.
* A list of available transports can be retrieved using
* stream_get_transports. See
* for a list of bulitin transports.
* @param int $errno If the optional errno and errstr
* arguments are present they will be set to indicate the actual system
* level error that occurred in the system-level socket(),
* bind(), and listen() calls. If
* the value returned in errno is
* 0 and the function returned FALSE, it is an
* indication that the error occurred before the bind()
* call. This is most likely due to a problem initializing the socket.
* Note that the errno and
* errstr arguments will always be passed by reference.
* @param string $errstr See errno description.
* @param int $flags A bitmask field which may be set to any combination of socket creation
* flags.
*
* For UDP sockets, you must use STREAM_SERVER_BIND as
* the flags parameter.
* @param resource $context
* @return resource Returns the created stream.
* @throws StreamException
*
*/
function stream_socket_server(string $local_socket, int &$errno = null, string &$errstr = null, int $flags = STREAM_SERVER_BIND | STREAM_SERVER_LISTEN, $context = null)
{
error_clear_last();
if ($context !== null) {
$result = \stream_socket_server($local_socket, $errno, $errstr, $flags, $context);
} else {
$result = \stream_socket_server($local_socket, $errno, $errstr, $flags);
}
if ($result === false) {
throw StreamException::createFromPhpError();
}
return $result;
}
/**
* Shutdowns (partially or not) a full-duplex connection.
*
* @param resource $stream An open stream (opened with stream_socket_client,
* for example)
* @param int $how One of the following constants: STREAM_SHUT_RD
* (disable further receptions), STREAM_SHUT_WR
* (disable further transmissions) or
* STREAM_SHUT_RDWR (disable further receptions and
* transmissions).
* @throws StreamException
*
*/
function stream_socket_shutdown($stream, int $how): void
{
error_clear_last();
$result = \stream_socket_shutdown($stream, $how);
if ($result === false) {
throw StreamException::createFromPhpError();
}
}
/**
* Tells whether the stream supports locking through
* flock.
*
* @param resource $stream The stream to check.
* @throws StreamException
*
*/
function stream_supports_lock($stream): void
{
error_clear_last();
$result = \stream_supports_lock($stream);
if ($result === false) {
throw StreamException::createFromPhpError();
}
}
/**
* Allows you to implement your own protocol handlers and streams for use
* with all the other filesystem functions (such as fopen,
* fread etc.).
*
* @param string $protocol The wrapper name to be registered.
* @param string $classname The classname which implements the protocol.
* @param int $flags Should be set to STREAM_IS_URL if
* protocol is a URL protocol. Default is 0, local
* stream.
* @throws StreamException
*
*/
function stream_wrapper_register(string $protocol, string $classname, int $flags = 0): void
{
error_clear_last();
$result = \stream_wrapper_register($protocol, $classname, $flags);
if ($result === false) {
throw StreamException::createFromPhpError();
}
}
/**
* Restores a built-in wrapper previously unregistered with
* stream_wrapper_unregister.
*
* @param string $protocol
* @throws StreamException
*
*/
function stream_wrapper_restore(string $protocol): void
{
error_clear_last();
$result = \stream_wrapper_restore($protocol);
if ($result === false) {
throw StreamException::createFromPhpError();
}
}
/**
* Allows you to disable an already defined stream wrapper. Once the wrapper
* has been disabled you may override it with a user-defined wrapper using
* stream_wrapper_register or reenable it later on with
* stream_wrapper_restore.
*
* @param string $protocol
* @throws StreamException
*
*/
function stream_wrapper_unregister(string $protocol): void
{
error_clear_last();
$result = \stream_wrapper_unregister($protocol);
if ($result === false) {
throw StreamException::createFromPhpError();
}
}