You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tailscale/logtail/filch/filch.go

285 lines
6.2 KiB
Go

// Copyright (c) Tailscale Inc & AUTHORS
// SPDX-License-Identifier: BSD-3-Clause
// Package filch is a file system queue that pilfers your stderr.
// (A FILe CHannel that filches.)
package filch
import (
"bufio"
"bytes"
"fmt"
"io"
"os"
"sync"
)
var stderrFD = 2 // a variable for testing
const defaultMaxFileSize = 50 << 20
type Options struct {
ReplaceStderr bool // dup over fd 2 so everything written to stderr comes here
MaxFileSize int
}
// A Filch uses two alternating files as a simplistic ring buffer.
type Filch struct {
OrigStderr *os.File
mu sync.Mutex
cur *os.File
alt *os.File
altscan *bufio.Scanner
recovered int64
maxFileSize int64
writeCounter int
// buf is an initial buffer for altscan.
// As of August 2021, 99.96% of all log lines
// are below 4096 bytes in length.
// Since this cutoff is arbitrary, instead of using 4096,
// we subtract off the size of the rest of the struct
// so that the whole struct takes 4096 bytes
// (less on 32 bit platforms).
// This reduces allocation waste.
buf [4096 - 64]byte
}
// TryReadline implements the logtail.Buffer interface.
func (f *Filch) TryReadLine() ([]byte, error) {
f.mu.Lock()
defer f.mu.Unlock()
if f.altscan != nil {
if b, err := f.scan(); b != nil || err != nil {
return b, err
}
}
f.cur, f.alt = f.alt, f.cur
if f.OrigStderr != nil {
if err := dup2Stderr(f.cur); err != nil {
return nil, err
}
}
if _, err := f.alt.Seek(0, io.SeekStart); err != nil {
return nil, err
}
f.altscan = bufio.NewScanner(f.alt)
f.altscan.Buffer(f.buf[:], bufio.MaxScanTokenSize)
f.altscan.Split(splitLines)
return f.scan()
}
func (f *Filch) scan() ([]byte, error) {
if f.altscan.Scan() {
return f.altscan.Bytes(), nil
}
err := f.altscan.Err()
err2 := f.alt.Truncate(0)
_, err3 := f.alt.Seek(0, io.SeekStart)
f.altscan = nil
if err != nil {
return nil, err
}
if err2 != nil {
return nil, err2
}
if err3 != nil {
return nil, err3
}
return nil, nil
}
// Write implements the logtail.Buffer interface.
func (f *Filch) Write(b []byte) (int, error) {
f.mu.Lock()
defer f.mu.Unlock()
if f.writeCounter == 100 {
// Check the file size every 100 writes.
f.writeCounter = 0
fi, err := f.cur.Stat()
if err != nil {
return 0, err
}
if fi.Size() >= f.maxFileSize {
// This most likely means we are not draining.
// To limit the amount of space we use, throw away the old logs.
if err := moveContents(f.alt, f.cur); err != nil {
return 0, err
}
}
}
f.writeCounter++
if len(b) == 0 || b[len(b)-1] != '\n' {
bnl := make([]byte, len(b)+1)
copy(bnl, b)
bnl[len(bnl)-1] = '\n'
return f.cur.Write(bnl)
}
return f.cur.Write(b)
}
// Close closes the Filch, releasing all os resources.
func (f *Filch) Close() (err error) {
f.mu.Lock()
defer f.mu.Unlock()
if f.OrigStderr != nil {
if err2 := unsaveStderr(f.OrigStderr); err == nil {
err = err2
}
f.OrigStderr = nil
}
if err2 := f.cur.Close(); err == nil {
err = err2
}
if err2 := f.alt.Close(); err == nil {
err = err2
}
return err
}
// New creates a new filch around two log files, each starting with filePrefix.
func New(filePrefix string, opts Options) (f *Filch, err error) {
var f1, f2 *os.File
defer func() {
if err != nil {
if f1 != nil {
f1.Close()
}
if f2 != nil {
f2.Close()
}
err = fmt.Errorf("filch: %s", err)
}
}()
path1 := filePrefix + ".log1.txt"
path2 := filePrefix + ".log2.txt"
f1, err = os.OpenFile(path1, os.O_CREATE|os.O_RDWR, 0600)
if err != nil {
return nil, err
}
f2, err = os.OpenFile(path2, os.O_CREATE|os.O_RDWR, 0600)
if err != nil {
return nil, err
}
fi1, err := f1.Stat()
if err != nil {
return nil, err
}
fi2, err := f2.Stat()
if err != nil {
return nil, err
}
mfs := defaultMaxFileSize
if opts.MaxFileSize > 0 {
mfs = opts.MaxFileSize
}
f = &Filch{
OrigStderr: os.Stderr, // temporary, for past logs recovery
maxFileSize: int64(mfs),
}
// Neither, either, or both files may exist and contain logs from
// the last time the process ran. The three cases are:
//
// - neither: all logs were read out and files were truncated
// - either: logs were being written into one of the files
// - both: the files were swapped and were starting to be
// read out, while new logs streamed into the other
// file, but the read out did not complete
if n := fi1.Size() + fi2.Size(); n > 0 {
f.recovered = n
}
switch {
case fi1.Size() > 0 && fi2.Size() == 0:
f.cur, f.alt = f2, f1
case fi2.Size() > 0 && fi1.Size() == 0:
f.cur, f.alt = f1, f2
case fi1.Size() > 0 && fi2.Size() > 0: // both
// We need to pick one of the files to be the elder,
// which we do using the mtime.
var older, newer *os.File
if fi1.ModTime().Before(fi2.ModTime()) {
older, newer = f1, f2
} else {
older, newer = f2, f1
}
if err := moveContents(older, newer); err != nil {
fmt.Fprintf(f.OrigStderr, "filch: recover move failed: %v\n", err)
fmt.Fprintf(older, "filch: recover move failed: %v\n", err)
}
f.cur, f.alt = newer, older
default:
f.cur, f.alt = f1, f2 // does not matter
}
if f.recovered > 0 {
f.altscan = bufio.NewScanner(f.alt)
f.altscan.Buffer(f.buf[:], bufio.MaxScanTokenSize)
f.altscan.Split(splitLines)
}
f.OrigStderr = nil
if opts.ReplaceStderr {
f.OrigStderr, err = saveStderr()
if err != nil {
return nil, err
}
if err := dup2Stderr(f.cur); err != nil {
return nil, err
}
}
return f, nil
}
func moveContents(dst, src *os.File) (err error) {
defer func() {
_, err2 := src.Seek(0, io.SeekStart)
err3 := src.Truncate(0)
_, err4 := dst.Seek(0, io.SeekStart)
if err == nil {
err = err2
}
if err == nil {
err = err3
}
if err == nil {
err = err4
}
}()
if _, err := src.Seek(0, io.SeekStart); err != nil {
return err
}
if _, err := dst.Seek(0, io.SeekStart); err != nil {
return err
}
if _, err := io.Copy(dst, src); err != nil {
return err
}
return nil
}
func splitLines(data []byte, atEOF bool) (advance int, token []byte, err error) {
if atEOF && len(data) == 0 {
return 0, nil, nil
}
if i := bytes.IndexByte(data, '\n'); i >= 0 {
return i + 1, data[0 : i+1], nil
}
if atEOF {
return len(data), data, nil
}
return 0, nil, nil
}