tailscale

Commit Graph

Author	SHA1	Message	Date
Mihai Parparita	f0f2b2e22b	logtail: increase maximum log line size in low memory mode The 255 byte limit was chosen more than 3 years ago (tailscale/corp@929635c9d9), when iOS was operating under much more significant memory constraints. With iOS 15 the network extension has an increased limit, so increasing it to 4K should be fine. The motivating factor was that the network interfaces being logged by linkChange in wgengine/userspace.go were getting truncated, and it would be useful to know why in some cases we're choosing the pdp_ip1 cell interface instead of the pdp_ip0 one. Updates #7184 Updates #7188 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Brad Fitzpatrick	b657187a69	cmd/tailscale, logtail: add 'tailscale debug daemon-logs' logtail mechanism Fixes #6836 Change-Id: Ia6eb39ff8972e1aa149aeeb63844a97497c2cf04 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	69c0b7e712	ipn/ipnlocal: add c2n handler to flush logtail for support debugging Updates tailscale/corp#8564 Change-Id: I0c619d4007069f90cffd319fba66bd034d63e84d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Mihai Parparita	8f2bc0708b	logtail: make logs flush delay dynamic Instead of a static FlushDelay configuration value, use a FlushDelayFn function that we invoke every time we decide send logs. This will allow mobile clients to be more dynamic about when to send logs. Updates #6768 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Joe Tsai	35c10373b5	types/logid: move logtail ID types here (#6336 ) Many packages reference the logtail ID types, but unfortunately pull in the transitive dependencies of logtail. Fix this problem by putting the log ID types in its own package with minimal dependencies. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	eff62b7b1b	logtail: remove MustParsePublicID (#6335 ) This function is no longer necessary as you can trivially rewrite: logtail.MustParsePublicID(...) with: must.Get(logtail.ParsePublicID(...)) Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Brad Fitzpatrick	da8def8e13	all: remove old +build tags The //go:build syntax was introduced in Go 1.17: https://go.dev/doc/go1.17#build-lines gofmt has kept the +build and go:build lines in sync since then, but enough time has passed. Time to remove them. Done with: perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build') Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	a04f1ff9e6	logtail: default to 2s log flush delay on all platforms Per chat. This is close enough to realtime but massively reduces number of HTTP requests. (which you can verify with TS_DEBUG_LOGTAIL_WAKES and watching tailscaled run at start) By contrast, this is set to 2 minutes on mobile. Change-Id: Id737c7924d452de5c446df3961f5e94a43a33f1f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	a315336287	logtail: change batched upload mechanism to not use CPU when idle The mobile implementation had a 2 minute ticker going all the time to do a channel send. Instead, schedule it as needed based on activity. Then we can be actually idle for long periods of time. Updates #3363 Change-Id: I0dba4150ea7b94f74382fbd10db54a82f7ef6c29 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Joe Tsai	3af0d4d0f2	logtail: always record timestamps in UTC (#5732 ) Upstream optimizations to the Go time package will make unmarshaling of time.Time 3-6x faster. See: * https://go.dev/cl/425116 * https://go.dev/cl/425197 * https://go.dev/cl/429862 The last optimization avoids a []byte -> string allocation if the timestamp string less than than 32B. Unfortunately, the presence of a timezone breaks that optimization. Drop recording of timezone as this is non-essential information. Most of the performance gains is upon unmarshal, but there is also a slight performance benefit to not marshaling the timezone as well. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	c321363d2c	logtail: support a copy ID (#5851 ) The copy ID operates similar to a CC in email where a message is sent to both the primary ID and also the copy ID. A given log message is uploaded once, but the log server records it twice for each ID. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Josh Soref	d4811f11a0	all: fix spelling mistakes Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>	2 years ago
Eng Zer Jun	f0347e841f	refactor: move from io/ioutil to io and os packages The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit replaces the existing io/ioutil functions with their new definitions in io and os packages. Reference: https://golang.org/doc/go1.16#ioutil Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>	2 years ago
Joe Tsai	21cd402204	logtail: do not log when backing off (#5485 )	2 years ago
Mihai Parparita	f371a1afd9	cmd/tsconnect: make logtail uploading work Initialize logtail and provide an uploader that works in the browser (we make a no-cors cross-origin request to avoid having to open up the logcatcher servers to CORS). Fixes #5147 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Brad Fitzpatrick	4950fe60bd	syncs, all: move to using Go's new atomic types instead of ours Fixes #5185 Change-Id: I850dd532559af78c3895e2924f8237ccc328449d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	5381437664	logtail, net/portmapper, wgengine/magicsock: use fmt.Appendf Fixes #5206 Change-Id: I490bb92e774ce7c044040537e2cd864fcf1dbe5a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	48e73e147a	logtail,logpolicy: tweak minor cosmetic things Just reading the code again in prep for some alloc reductions. Change-Id: I065226ea794b7ec7144c2b15942d35131c9313a8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Joe Tsai	96f73b3894	logtail: do not panic in PrivateID.PublicID (#4815 ) It is not idiomatic for Go code to panic for situations that can be normal. For example, if a server receives PrivateID from a client, it is normal for the server to call PrivateID.PublicID to validate that the PublicID matches. However, doing so would panic prior to this change. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Brad Fitzpatrick	02e580c1d2	logtail: use http.NewRequestWithContext Saves some allocs. Not hot, but because we can now. And a const instead of a var. Change-Id: Ieb2b64534ed38051c36b2c0aa2e82739d9d0e015 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Mihai Parparita	3222bce02d	logtail: add instance metadata to the entry logtail Allows instances that are running with the same machine ID (due to cloning) to be distinguished. Also adds sequence numbers to detect duplicates. For tailscale/corp#5244 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Brad Fitzpatrick	9f1dd716e8	tailcfg, logtail: provide Debug bit to disable logtail For people running self-hosted control planes who want a global opt-out knob instead of running their own logcatcher. Change-Id: I7f996c09f45850ff77b58bfd5a535e197971725a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	0868329936	all: use any instead of interface{} My favorite part of generics. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	5f529d1359	logtail: add Logger.PrivateID accessor For the control plane to use. Change-Id: I0f02321fc4fa3a41c3ece3b51eee729ea9770905 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	84138450a4	types/logger, logtail: add mechanism to do structured JSON logs e.g. the change to ipnlocal in this commit ultimately logs out: {"logtail":{"client_time":"2022-02-17T20:40:30.511381153-08:00","server_time":"2022-02-18T04:40:31.057771504Z"},"type":"Hostinfo","val":{"GoArch":"amd64","Hostname":"tsdev","IPNVersion":"1.21.0-date.20220107","OS":"linux","OSVersion":"Debian 11.2 (bullseye); kernel=5.10.0-10-amd64"},"v":1} Change-Id: I668646b19aeae4a2fed05170d7b279456829c844 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	1dc4151f8b	logtail: add MustParsePublicID Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	5d9ab502f3	logtail: don't strip verbose level on upload For analysis of log spam. Bandwidth is ~unchanged from had we not stripped the "[vN] " from text; it just gets restructed intot he new "v":N, field. I guess it adds one byte. Updates #1548 Change-Id: Ie00a4e0d511066a33d10dc38d765d92b0b044697 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	86a902b201	all: adjust some log verbosity Updates #1548 Change-Id: Ia55f1b5dc7dfea09a08c90324226fb92cd10fa00 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	e45d51b060	logtail: add a few new methods to PublicID These are for use in our internal systems. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	9fe5ece833	logtail: cap the buffer size in encodeText This started as an attempt to placate GitHub's code scanner, but it's also probably generally a good idea. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	40e2b312b6	ipn/ipnserver, logpolicy: move Windows disk logging up earlier This moves the Windows-only initialization of the filelogger into logpolicy. Previously we only did it when babysitting the tailscaled subprocess, but this meant that log messages from the service itself never made it to disk. Examples that weren't logged to disk: * logtail unable to dial out, * DNS flush messages from the service * svc.ChangeRequest messages (#3581) This is basically the same fix as #3571 but staying in the Logf type, and avoiding build-tagged file (which wasn't quite a goal, but happened and seemed nice) Fixes #3570 Co-authored-by: Aaron Klotz <aaron@tailscale.com> Change-Id: Iacd80c4720b7218365ec80ae143339d030842702	3 years ago
Brad Fitzpatrick	3b541c833e	util/clientmetric, logtail: log metric changes Updates #3307 Change-Id: I1399ebd786f6ff7defe6e11c0eb651144c071574 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	05e55f4a0b	logtail/filch: limit buffer file size to 50MB Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Josh Bleecher Snyder	94fb42d4b2	all: use testingutil.MinAllocsPerRun There are a few remaining uses of testing.AllocsPerRun: Two in which we only log the number of allocations, and one in which dynamically calculate the allocations target based on a different AllocsPerRun run. This also allows us to tighten the "no allocs" test in wgengine/filter. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	0c038b477f	logtail: add a re-usable buffer for uploads This avoids a per-upload alloc (which in practice often means per-log-line), up to 4k. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	278e7de9c9	logtail: always send a json array The code goes to some effort to send a single JSON object when there's only a single line and a JSON array when there are multiple lines. It makes the code more complex and more expensive; when we add a second line, we have to use a second buffer to duplicate the first one after adding a leading square brackets. The savings come to two bytes. Instead, always send an array. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	93284209bc	logtail/filch: preallocate a scanner buffer Scanning log lines is a frequent source of allocations. Pre-allocate a re-usable buffer. This still doesn't help when there are giant log lines. Those will still be problematic from an iOS memory perspective. For more on that, see https://github.com/tailscale/corp/issues/2423. (For those who cannot follow that link, it is a discussion of particular problematic types of log lines for particular categories of customers. The "categories of customers" part is the reason that it is a private issue.) There is also a latent bug here. If we ever encounter a log line longer than bufio.MaxScanTokenSize, then bufio.Scan will return an error, and we'll truncate the file and discard the rest of the log. That's not good, but bufio.MaxScanTokenSize is really big, so it probably doesn't matter much in practice now. Unfortunately, it does prevent us from easily capping the potential memory usage here, on pain of losing log entries. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	a5da4ed981	all: gofmt with Go 1.17 This adds "//go:build" lines and tidies up existing "// +build" lines. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	0373ba36f3	logtail: fix typo in comment Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
David Crawshaw	1606ef5219	logtail: print panics from previous runs on stderr Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	3 years ago
David Crawshaw	297b3d6fa4	staticcheck.conf: turn off noisy lint errors Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	3 years ago
Josh Bleecher Snyder	bb8ce48a6b	logtail: allow changing log level concurrently When tailscaled starts up, these lines run: func run() error { // ... pol := logpolicy.New("tailnode.log.tailscale.io") pol.SetVerbosityLevel(args.verbose) // ... } If there are old log entries present, they immediate start getting uploaded. This races with the call to pol.SetVerbosityLevel. This manifested itself as a test failure in tailscale.com/tstest/integration when run with -race: WARNING: DATA RACE Read at 0x00c0001bc970 by goroutine 24: tailscale.com/logtail.(Logger).Write() /Users/josh/t/corp/oss/logtail/logtail.go:517 +0x27c log.(Logger).Output() /Users/josh/go/ts/src/log/log.go:184 +0x2b8 log.Printf() /Users/josh/go/ts/src/log/log.go:323 +0x94 tailscale.com/logpolicy.newLogtailTransport.func1() /Users/josh/t/corp/oss/logpolicy/logpolicy.go:509 +0x36c net/http.(Transport).dial() /Users/josh/go/ts/src/net/http/transport.go:1168 +0x238 net/http.(Transport).dialConn() /Users/josh/go/ts/src/net/http/transport.go:1606 +0x21d0 net/http.(Transport).dialConnFor() /Users/josh/go/ts/src/net/http/transport.go:1448 +0xe4 Previous write at 0x00c0001bc970 by main goroutine: tailscale.com/logtail.(Logger).SetVerbosityLevel() /Users/josh/t/corp/oss/logtail/logtail.go:131 +0x98 tailscale.com/logpolicy.(Policy).SetVerbosityLevel() /Users/josh/t/corp/oss/logpolicy/logpolicy.go:463 +0x60 main.run() /Users/josh/t/corp/oss/cmd/tailscaled/tailscaled.go:178 +0x50 main.main() /Users/josh/t/corp/oss/cmd/tailscaled/tailscaled.go:163 +0x71c Goroutine 24 (running) created at: net/http.(Transport).queueForDial() /Users/josh/go/ts/src/net/http/transport.go:1417 +0x4d8 net/http.(Transport).getConn() /Users/josh/go/ts/src/net/http/transport.go:1371 +0x5b8 net/http.(Transport).roundTrip() /Users/josh/go/ts/src/net/http/transport.go:585 +0x7f4 net/http.(Transport).RoundTrip() /Users/josh/go/ts/src/net/http/roundtrip.go:17 +0x30 net/http.send() /Users/josh/go/ts/src/net/http/client.go:251 +0x4f0 net/http.(Client).send() /Users/josh/go/ts/src/net/http/client.go:175 +0x148 net/http.(Client).do() /Users/josh/go/ts/src/net/http/client.go:717 +0x1d0 net/http.(Client).Do() /Users/josh/go/ts/src/net/http/client.go:585 +0x358 tailscale.com/logtail.(Logger).upload() /Users/josh/t/corp/oss/logtail/logtail.go:367 +0x334 tailscale.com/logtail.(Logger).uploading() /Users/josh/t/corp/oss/logtail/logtail.go:289 +0xec Rather than complicate the logpolicy API, allow the verbosity to be adjusted concurrently. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	61e411344f	logtail/filch: add staticcheck annotation To work around a staticcheck bug when running with GOOS=windows. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Brad Fitzpatrick	b34fbb24e8	logtail: reduce PublicID.UnmarshalText from 2 allocs to 0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	b4cf837d8a	logtail: use link monitor to determine when to retry after upload failure Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c0cdca6d06	cmd/tailscaled, logtail: share link monitor from wgengine to logtail Part of overall effort to clean up, unify, use link monitoring more, and make Tailscale quieter when all networks are down. This is especially bad on macOS where we can get killed for not being polite it seems. (But we should be polite in any case) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Denton Gentry	013da6660e	logtail: add tests + add a test for parseAndRemoveLogLevel() + add a test for drainPendingMessages() + test JSON log encoding including several special cases Other tests frequently send logs but a) don't check the result and b) do so by happenstance, such that the code in encode() was not consistently being exercised and leading to spurious changes in code coverage. These tests attempt to more systematically test the logging function. This is the second attempt to add these tests, the first attempt (in https://github.com/tailscale/tailscale/pull/1114) had two issues: 1. httptest.NewServer creates multiple goroutine handlers, and logtail uses goroutines to upload, but the first version had no locking in the server to guard this. Moved data handling into channels to get synchronization. 2. The channel to notify the test of the arrival of data had a depth of 1, in cases where the Logger sent multiple uploads it would block the server. This resulted in the first iteration of these tests being flaky, and we reverted it. This new version of the tests has passed with go test -race -count=10000 and seems solid. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	4 years ago
Denton Gentry	ce058c8280	Revert "Add logtail tests (#1114 )" (#1116 ) This reverts commit `e4f53e9b6f`. At least two of these tests are flakey, reverting until they can be made more robust. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	4 years ago
Denton Gentry	e4f53e9b6f	Add logtail tests (#1114 ) * logtail: test parseAndRemoveLogLevel() Signed-off-by: Denton Gentry <dgentry@tailscale.com> * logtail: test JSON log encoding. Expand TestUploadMessages to also exercise the encoding functions in logtail, like JSON logging and timestamps. Other tests frequently send logs but a) don't check the result and b) do so by happenstance, such that the lines in encode() were not consistently being exercised and leading to spurious changes in code coverage. Signed-off-by: Denton Gentry <dgentry@tailscale.com> * logtail: add a test for drainPendingMessages Make the client buffer some messages before the upload server becomes available. Signed-off-by: Denton Gentry <dgentry@tailscale.com> * logtail: use %q, raw strings, and io.WriteString %q escapes binary characters for us. raw strings avoid so much backslash escaping Signed-off-by: Denton Gentry <dgentry@tailscale.com>	4 years ago

1 2

83 Commits (fdc2018d67e65956a2424349c27d742b466d8b60)