Commit Graph

685 Commits (f4ff26f5774f2bc4c6ec1eb981739fb3218152ff)

Author SHA1 Message Date
Brad Fitzpatrick f4ff26f577 types/pad32: delete package
Use Go 1.19's new 64-bit alignment ~hidden feature instead.

Fixes #5356

Change-Id: Ifcbcb115875a7da01df3bc29e9e7feadce5bc956
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Anton Tolchanov e25ab75795 net/dns: getting base DNS config is not supported on macOS
Instead of returning a custom error, use ErrGetBaseConfigNotSupported
that seems to be intended for this use case. This fixes DNS resolution
on macOS clients compiled from source.

Signed-off-by: Anton Tolchanov <anton@tailscale.com>
2 years ago
Joe Tsai c21a3c4733
types/netlogtype: new package for network logging types (#6092)
The netlog.Message type is useful to depend on from other packages,
but doing so would transitively cause gvisor and other large packages
to be linked in.

Avoid this problem by moving all network logging types to a single package.

We also update staticcheck to take in:

	003d277bcf

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
2 years ago
Andrew Dunham 95f3dd1346 net/interfaces: don't dereference null pointer if no destination/netmask
Fixes #6065

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I7159b8cbb8d5f47c0668cf83e59167f182f1defd
2 years ago
Andrew Dunham ba459aeef5 net/interfaces: don't call GetList in List.ForeachInterface
It looks like this was left by mistake in 4a3e2842.

Change-Id: Ie4e3d5842548cd2e8533b3552298fb1ce9ba761a
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
2 years ago
Peter Cai 4597ec1037 net/dnscache: Handle 4-in-6 addresses in DNS responses
On Android, the system resolver can return IPv4 addresses as IPv6-mapped
addresses (i.e. `::ffff:a.b.c.d`). After the switch to `net/netip`
(19008a3), this case is no longer handled and a response like this will
be seen as failure to resolve any IPv4 addresses.

Handle this case by simply calling `Unmap()` on the returned IPs. Fixes #5698.

Signed-off-by: Peter Cai <peter@typeblog.net>
2 years ago
Andrew Dunham 74693793be net/netcheck, tailcfg: track whether OS supports IPv6
We had previously added this to the netcheck report in #5087 but never
copied it into the NetInfo struct. Additionally, add it to log lines so
it's visible to support.

Change-Id: Ib6266f7c6aeb2eb2a28922aeafd950fe1bf5627e
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
2 years ago
Andrew Dunham e966f024b0 net/dns: print systemd-resolved ResolvConfMode
The ResolvConfMode property is documented to return how systemd-resolved
is currently managing /etc/resolv.conf. Include that information in the
debug line, when available, to assist in debugging DNS issues.

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I1ae3a257df1d318d0193a8c7f135c458ec45093e
2 years ago
Andrew Dunham 223126fe5b cmd/derper, net/netcheck: add challenge/response to generate_204 endpoint
The Lufthansa in-flight wifi generates a synthetic 204 response to the
DERP server's /generate_204 endpoint. This PR adds a basic
challenge/response to the endpoint; something sufficiently complicated
that it's unlikely to be implemented by a captive portal. We can then
check for the expected response to verify whether we're being MITM'd.

Follow-up to #5601

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I94a68c9a16a7be7290200eea6a549b64f02ff48f
2 years ago
Anton Tolchanov d499afac78 net/interfaces: improve default route detection
Instead of treating any interface with a non-ifscope route as a
potential default gateway, now verify that a given route is
actually a default route (0.0.0.0/0 or ::/0).

Fixes #5879

Signed-off-by: Anton Tolchanov <anton@tailscale.com>
2 years ago
Anton Tolchanov 9c2ad7086c net/interfaces: deduplicate route table parsing on Darwin and FreeBSD
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
2 years ago
Mihai Parparita 9d04ffc782 net/wsconn: add back custom wrapper for turning a websocket.Conn into a net.Conn
We removed it in #4806 in favor of the built-in functionality from the
nhooyr.io/websocket package. However, it has an issue with deadlines
that has not been fixed yet (see nhooyr/websocket#350). Temporarily
go back to using a custom wrapper (using the fix from our fork) so that
derpers will stop closing connections too aggressively.

Updates #5921

Signed-off-by: Mihai Parparita <mihai@tailscale.com>
2 years ago
Maisem Ali 3555a49518 net/dns: always attempt to read the OS config on macOS/iOS
Also reconfigure DNS on iOS/macOS on link changes.

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago
Brad Fitzpatrick 9a264dac01 net/netcheck: fix crash in checkCaptivePortal
If netcheck happens before there's a derpmap.

This seems to only affect Headscale because it doesn't send a derpmap
as early?

Change-Id: I51e0dfca8e40623e04702bc9cc471770ca20d2c2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Joe Tsai 1b4e4cc1e8
wgengine/netlog: new package for traffic flow logging (#5864)
The Logger type managers a logtail.Logger for extracting
statistics from a tstun.Wrapper.
So long as Shutdown is called, it ensures that logtail
and statistic gathering resources are properly cleared up.

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
2 years ago
Maisem Ali ecf6cdd830 ssh/tailssh: add TestSSHAuthFlow
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago
Joe Tsai 84e8f25c21
net/tstun: rename statististics method (#5852)
Rename StatisticsEnable as SetStatisticsEnabled to be consistent
with other similarly named methods.

Rename StatisticsExtract as ExtractStatistics to follow
the convention where methods start with a verb.
It was originally named with Statistics as a prefix so that
statistics related methods would sort well in godoc,
but that property no longer holds.

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
2 years ago
Joe Tsai dd045a3767
net/flowtrack: add json tags to Tuple (#5849)
By convention, JSON serialization uses camelCase.
Specify such names on the Tuple type.

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
2 years ago
Joe Tsai a73c423c8a
net/tunstats: add Counts.Add (#5848)
The Counts.Add method merges two Counts together.

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
2 years ago
Joe Tsai 24ebf161e8
net/tstun: instrument Wrapper with statistics gathering (#5847)
If Wrapper.StatisticsEnable is enabled,
then per-connection counters are maintained.
If enabled, Wrapper.StatisticsExtract must be periodically called
otherwise there is unbounded memory growth.

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
2 years ago
Joe Tsai 2934c5114c
net/tunstats: new package to track per-connection counters (#5818)
High-level API:

	type Statistics struct { ... }
	type Counts struct { TxPackets, TxBytes, RxPackets, RxBytes uint64 }
	func (*Statistics) UpdateTx([]byte)
	func (*Statistics) UpdateRx([]byte)
	func (*Statistics) Extract() map[flowtrack.Tuple]Counts

The API accepts a []byte instead of a packet.Parsed so that a future
implementation can directly hash the address and port bytes,
which are contiguous in most IP packets.
This will be useful for a custom concurrent-safe hashmap implementation.

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
2 years ago
Mihai Parparita 8343b243e7 all: consistently initialize Logf when creating tsdial.Dialers
Most visible when using tsnet.Server, but could have resulted in dropped
messages in a few other places too.

Fixes #5743

Signed-off-by: Mihai Parparita <mihai@tailscale.com>
2 years ago
Josh Soref d4811f11a0 all: fix spelling mistakes
Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>
2 years ago
Brad Fitzpatrick bb7be74756 net/dns/publicdns: permit more NextDNS profile bits in its IPv6 suffix
I brain-o'ed the math earlier. The NextDNS prefix is /32 (actually
/33, but will guarantee last bit is 0), so we have 128-32 = 96 bits
(12 bytes) of config/profile ID that we can extract. NextDNS doesn't
currently use all those, but might.

Updates #2452

Change-Id: I249bd28500c781e45425fd00fd3f46893ae226a2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Andrew Dunham a5fab23e8f
net/dns: format OSConfig correctly with no pointers (#5766)
Fixes tailscale/tailscale#5669

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
2 years ago
Emmanuel T Odeke f981b1d9da all: fix resource leaks with missing .Close() calls
Fixes #5706

Signed-off-by: Emmanuel T Odeke <emmanuel@orijtech.com>
2 years ago
Andrew Dunham b1867457a6
doctor: add package for running in-depth healthchecks; use in bugreport (#5413)
Change-Id: Iaa4e5b021a545447f319cfe8b3da2bd3e5e5782b
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
2 years ago
James Tucker f7cb535693 net/speedtest: retune to meet iperf on localhost in a VM
- removed some in-flow time calls
- increase buffer size to 2MB to overcome syscall cost
- move relative time computation from record to report time

Signed-off-by: James Tucker <james@tailscale.com>
2 years ago
James Tucker 146f51ce76 net/packet: fix filtering of short IPv4 fragments
The fragment offset is an 8 byte offset rather than a byte offset, so
the short packet limit is now in fragment block size in order to compare
with the offset value.

The packet flags are in the first 3 bits of the flags/frags byte, and
so after conversion to a uint16 little endian value they are at the
start, not the end of the value - the mask for extracting "more
fragments" is adjusted to match this byte.

Extremely short fragments less than 80 bytes are dropped, but fragments
over 80 bytes are now accepted.

Fixes #5727

Signed-off-by: James Tucker <james@tailscale.com>
2 years ago
Andrew Dunham c6162c2a94
net/netcheck: add check for captive portal (#5593)
This doesn't change any behaviour for now, other than maybe running a
full netcheck more often. The intent is to start gathering data on
captive portals, and additionally, seeing this in the 'tailscale
netcheck' command should provide a bit of additional information to
users.

Updates #1634

Change-Id: I6ba08f9c584dc0200619fa97f9fde1a319f25c76
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
2 years ago
Denton Gentry 42f1d92ae0 net/netns: implement UseSocketMark for Android.
Build fails on Android:
`../../../../go/pkg/mod/tailscale.com@v1.1.1-0.20220916223019-65c24b6334e9/wgengine/magicsock/magicsock_linux.go:133:12: undefined: netns.UseSocketMark`

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2 years ago
Eng Zer Jun f0347e841f refactor: move from io/ioutil to io and os packages
The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.

Reference: https://golang.org/doc/go1.16#ioutil
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
2 years ago
Brad Fitzpatrick 74674b110d envknob: support changing envknobs post-init
Updates #5114

Change-Id: Ia423fc7486e1b3f3180a26308278be0086fae49b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Andrew Dunham cf61070e26
net/dnscache: add better logging to bootstrap DNS path (#5640)
Change-Id: I4cde3a72e06dac18df856a0cfeac10ab7e3a9108
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
2 years ago
Mihai Parparita 82e82d9b7a net/dns/resolver: remove unused responseTimeout constant
Timeout is now enforced elsewhere, see discussion in https://github.com/tailscale/tailscale/pull/4408#discussion_r970092333.

Signed-off-by: Mihai Parparita <mihai@tailscale.com>
2 years ago
nyghtowl 0f16640546 net/dns: fix fmt error on Revert print
Fixes #5619

Signed-off-by: nyghtowl <warrick@tailscale.com>
2 years ago
David Anderson 7c49db02a2 wgengine/magicsock: don't use BPF receive when SO_MARK doesn't work.
Fixes #5607

Signed-off-by: David Anderson <danderson@tailscale.com>
2 years ago
Brad Fitzpatrick 024257ef5a net/stun: unmap IPv4 addresses in 16 byte STUN replies
Updates #5602

Change-Id: I2276ad2bfb415b9ff52f37444f2a1d74b38543b1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Brad Fitzpatrick 708b7bff3d net/dns/publicdns: also support NextDNS DoH query parameters
The plan has changed. Doing query parameters rather than path +
heades. NextDNS added support for query parameters.

Updates #2452

Change-Id: I4783c0a06d6af90756d9c80a7512644ba702388c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Brad Fitzpatrick 81bc4992f2 net/netns: add TS_FORCE_LINUX_BIND_TO_DEVICE for Linux
For debugging a macOS-specific magicsock issue. macOS runs in
bind-to-interface mode always. This lets me force Linux into the same
mode as macOS, even if the Linux kernel supports SO_MARK, as it
usually does.

Updates #2331 etc

Change-Id: Iac9e4a7429c1781337e716ffc914443b7aa2869d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Brad Fitzpatrick e7376aca25 net/dns/resolver: set DNS-over-HTTPS Accept and User-Agent header on requests
Change-Id: I14b821771681e70405a507f43229c694159265ff
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Brad Fitzpatrick c14361e70e net/dns/publicdns: support NextDNS DoH URLs with path parameters
Updates #2452

Change-Id: I0f1c34cc1672e87e7efd0adfe4088724dd0de3ed
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Brad Fitzpatrick 2aade349fc net/dns, types/dnstypes: update some comments, tests for DoH
Clarify & verify that some DoH URLs can be sent over tailcfg
in some limited cases.

Updates #2452

Change-Id: Ibb25db77788629c315dc26285a1059a763989e24
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Brad Fitzpatrick 58abae1f83 net/dns/{publicdns,resolver}: add NextDNS DoH support
NextDNS is unique in that users create accounts and then get
user-specific DNS IPs & DoH URLs.

For DoH, the customer ID is in the URL path.

For IPv6, the IP address includes the customer ID in the lower bits.

For IPv4, there's a fragile "IP linking" mechanism to associate your
public IPv4 with an assigned NextDNS IPv4 and that tuple maps to your
customer ID.

We don't use the IP linking mechanism.

Instead, NextDNS is DoH-only. Which means using NextDNS necessarily
shunts all DNS traffic through 100.100.100.100 (programming the OS to
use 100.100.100.100 as the global resolver) because operating systems
can't usually do DoH themselves.

Once it's in Tailscale's DoH client, we then connect out to the known
NextDNS IPv4/IPv6 anycast addresses.

If the control plane sends the client a NextDNS IPv6 address, we then
map it to the corresponding NextDNS DoH with the same client ID, and
we dial that DoH server using the combination of v4/v6 anycast IPs.

Updates #2452

Change-Id: I3439d798d21d5fc9df5a2701839910f5bef85463
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Andrew Dunham f52a659076
net/dnsfallback: allow setting log function (#5550)
This broke a test in corp that enforces we don't use the log package.

Signed-off-by: Andrew Dunham <andrew@tailscale.com>
2 years ago
Andrew Dunham b8596f2a2f
net/dnsfallback: cache most recent DERP map on disk (#5545)
This is especially helpful as we launch newer DERPs over time, and older
clients have progressively out-of-date static DERP maps baked in. After
this, as long as the client has successfully connected once, it'll cache
the most recent DERP map it knows about.

Resolves an in-code comment from @bradfitz

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
2 years ago
Kris Brandow 19008a3023 net/dnscache: use net/netip
Removes usage of net.IP and net.IPAddr where possible from net/dnscache.

Fixes #5282

Signed-off-by: Kris Brandow <kris.brandow@gmail.com>
2 years ago
Brad Fitzpatrick 9bd9f37d29 go.mod: bump wireguard/windows, which moves to using net/netip
Updates #5162

Change-Id: If99a3f0000bce0c01bdf44da1d513f236fd7cdf8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Brad Fitzpatrick 9f6c8517e0 net/dns: set OS DNS to 100.100.100.100 for route-less ExtraRecords [cap 41]
If ExtraRecords (Hosts) are specified without a corresponding split
DNS route and global DNS is specified, then program the host OS DNS to
use 100.100.100.100 so it can blend in those ExtraRecords.

Updates #1543

Change-Id: If49014a5ecc8e38978ff26e54d1f74fe8dbbb9bc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Maisem Ali 68d9d161f4 net/dns: [win] fix regression in disableDynamicUpdate
Somehow I accidentally set the wrong registry value here.
It should be DisableDynamicUpdate=1 and not EnableDNSUpdate=0.

This is a regression from 545639e.

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago