441 Commits (f116a4c44f2fa2430eeb948674d678d1b94f8526)

Author	SHA1	Message	Date
Brad Fitzpatrick	52e1031428	cmd/tailscale: gofmt ... From 6d10655dc3 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Avery Pennarun	6d10655dc3	ipnlocal: accept a new opts.UpdatePrefs field. ... This is needed because the original opts.Prefs field was at some point subverted for use in frontend->backend state migration for backward compatibility on some platforms. We still need that feature, but we also need the feature of providing the full set of prefs from `tailscale up`, *not* including overwriting the prefs.Persist keys, so we can't use the original field from `tailscale up`. `tailscale up` had attempted to compensate for that by doing SetPrefs() before Start(), but that violates the ipn.Backend contract, which says you should call Start() before anything else (that's why it's called Start()). As a result, doing SetPrefs({ControlURL=..., WantRunning=true}) would cause a connection to the *previous* control server (because WantRunning=true), and then connect to the *new* control server only after running Start(). This problem may have been avoided before, but only by pure luck. It turned out to be relatively harmless since the connection to the old control server was immediately closed and replaced anyway, but it created a race condition that could have caused spurious notifications or rejected keys if the server responded quickly. As already covered by existing TODOs, a better fix would be to have Start() get out of the business of state migration altogether. But we're approaching a release so I want to make the minimum possible fix. Fixes #1840. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Josh Bleecher Snyder	7dbbe0c7c7	cmd/tailscale/cli: fix running from Xcode ... We were over-eager in running tailscale in GUI mode. f42ded7acf fixed that by checking for a variety of shell-ish env vars and using those to force us into CLI mode. However, for reasons I don't understand, those shell env vars are present when Xcode runs Tailscale.app on my machine. (I've changed no configs, modified nothing on a brand new machine.) Work around that by adding an additional "only in GUI mode" check. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	9360f36ebd	all: use lower-case letters at the start of error message ... Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Brad Fitzpatrick	962bf74875	cmd/tailscale: fail if tailscaled closes the IPN connection ... I was going to write a test for this using the tstest/integration test stuff, but the testcontrol implementation isn't quite there yet (it always registers nodes and doesn't provide AuthURLs). So, manually tested for now. Fixes #1843 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Crawshaw	1f48d3556f	cmd/tailscale/cli: don't report outdated auth URL to web UI ... This brings the web 'up' logic into line with 'tailscale up'. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
David Crawshaw	1336ed8d9e	cmd/tailscale/cli: skip new tab on web login ... It doesn't work properly. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
Brad Fitzpatrick	ca65c6cbdb	cmd/tailscale: make 'file cp' have better error messages on bad targets ... Say when target isn't owned by current user, and when target doesn't exist in netmap. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	90002be6c0	cmd/tailscale: make pref-revert checks ignore OS-irrelevant prefs ... This fixes #1833 in two ways: * stop setting NoSNAT on non-Linux. It only matters on Linux and the flag is hidden on non-Linux, but the code was still setting it. Because of that, the new pref-reverting safety checks were failing when it was changing. * Ignore the two Linux-only prefs changing on non-Linux. Fixes #1833 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	fb67d8311c	cmd/tailscale: pull out, parameterize up FlagSet creation for tests ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	f6e3240dee	cmd/tailscale/cli: add test to catch ipn.Pref additions	4 years ago
Avery Pennarun	6caa02428e	cmd/tailscale/cli/up: "LoggedOut" pref is implicit. ... There's no need to warn that it was not provided on the command line after doing a sequence of up; logout; up --args. If you're asking for tailscale to be up, you always mean that you prefer LoggedOut to become false. Fixes #1828 Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	19c3e6cc9e	types/logger: rate limited: more hysteresis, better messages. ... - Switch to our own simpler token bucket, since x/time/rate is missing necessary stuff (can't provide your own time func; can't check the current bucket contents) and it's overkill anyway. - Add tests that actually include advancing time. - Don't remove the rate limit on a message until there's enough room to print at least two more of them. When we do, we'll also print how many we dropped, as a contextual reminder that some were previously lost. (This is more like how the Linux kernel does it.) - Reformat the [RATE LIMITED] messages to be shorter, and to not corrupt original message. Instead, we print the message, then print its format string. - Use %q instead of \"%s\", for more accurate parsing later, if the format string contained quotes. Fixes #1772 Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Josh Bleecher Snyder	20e04418ff	net/dns: add GOOS build tags ... Fixes #1786 Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
David Anderson	72b6d98298	net/interfaces: return all Tailscale addresses from Tailscale(). ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Josh Bleecher Snyder	3c543c103a	wgengine/magicsock: unify initial bind and rebind ... We had two separate code paths for the initial UDP listener bind and any subsequent rebinds. IPv6 got left out of the rebind code. Rather than duplicate it there, unify the two code paths. Then improve the resulting code: * Rebind had nested listen attempts to try the user-specified port first, and then fall back to :0 if that failed. Convert that into a loop. * Initial bind tried only the user-specified port. Rebind tried the user-specified port and 0. But there are actually three ports of interest: The one the user specified, the most recent port in use, and 0. We now try all three in order, as appropriate. * In the extremely rare case in which binding to port 0 fails, use a dummy net.PacketConn whose reads block until close. This will keep the wireguard-go receive func goroutine alive. As a pleasant side-effect of this, if we decide that we need to resuscitate #1796, it will now be much easier. Fixes #1799 Co-authored-by: David Anderson <danderson@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	8fb66e20a4	wgengine/magicsock: remove DefaultPort const ... Assume it'll stay at 0 forever, so hard-code it and delete code conditional on it being non-0. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Brad Fitzpatrick	1e6d512bf0	cmd/tailscale: improve file cp error message in macOS GUI version ... Fixes tailscale/corp#1684 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	8554694616	cmd/tailscale: add 'tailscale file get' subcommand ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	cafa037de0	cmd/tailscale/cli: rename 'tailscale push' to 'tailscale file cp' ... And reverse order, require final colon, and support multiple files. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Ross Zurowski	b062ac5e86	cmd/tailscale: fix typo in error message (#1807) ... Signed-off-by: Ross Zurowski <ross@rosszurowski.com>	4 years ago
Brad Fitzpatrick	5ecc7c7200	cmd/tailscale: make the new 'up' errors prettier and more helpful ... Fixes #1746 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	ffe6c8e335	cmd/tailscale/cli: don't do a simple up when in state NeedsLogin ... Fixes #1780 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	25ce9885a2	net/dns: don't use NM+resolved for NM >=1.26.6. ... NetworkManager fixed the bug that forced us to use NetworkManager if it's programming systemd-resolved, and in the same release also made NetworkManager ignore DNS settings provided for unmanaged interfaces... Which breaks what we used to do. So, with versions 1.26.6 and above, we MUST NOT use NetworkManager to indirectly program systemd-resolved, but thankfully we can talk to resolved directly and get the right outcome. Fixes #1788 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Aleksandar Pesic	7c985e4944	ipn/ipnlocal: add file sharing to windows shell ... Updates: tailscale/winmin#33 Signed-off-by: Aleksandar Pesic <peske.nis@gmail.com>	4 years ago
Brad Fitzpatrick	d94ed7310b	cmd/tailscale/cli: add test for already-submitted #1777 ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	30629c430a	cmd/tailscale/cli: don't force an interactive login on --reset. ... Fixes #1778 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	67ba6aa9fd	cmd/tailscale/cli: fix typo in ExitNodeID mapping. ... Prevented turning off exit nodes. Fixes #1777 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	11780a4503	cmd/tailscale: only send file basename in push ... Fixes #1640 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	820952daba	cmd/tailscale: don't print out old authURL on up --force-reauth ... Fixes #1671 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c91a22c82e	cmd/tailscale: don't print auth URL when using a --authkey ... Fixes #1755 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	e40e5429c2	cmd/tailscale/cli: make 'tailscale up' protect --advertise-exit-node removal ... The new "tailscale up" checks previously didn't protect against --advertise-exit-node being omitted in the case that --advertise-routes was also provided. It wasn't done before because there is no corresponding pref for "--advertise-exit-node"; it's a helper flag that augments --advertise-routes. But that's an implementation detail and we can still help users. We just have to special case that pref and look whether the current routes include both the v4 and v6 /0 routes. Fixes #1767 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	a16eb6ac41	cmd/tailscale/cli: show online/offline status in push --file-targets ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	dedbd483ea	cmd/tailscale/cli: don't require explicit --operator if it matches $USER ... This doesn't make --operator implicit (which we might do in the future), but it at least doesn't require repeating it in the future when it already matches $USER. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	91c9c33036	cmd/tailscaled: don't block ipnserver startup behind engine init on Windows ... With this change, the ipnserver's safesocket.Listen (the localhost tcp.Listen) happens right away, before any synchronous TUN/DNS/Engine/etc setup work, which might be slow, especially on early boot on Windows. Because the safesocket.Listen starts up early, that means localhost TCP dials (the safesocket.Connect from the GUI) complete successfully and thus the GUI avoids the MessageBox error. (I verified that pacifies it, even without a Listener.Accept; I'd feared that Windows localhost was maybe special and avoided the normal listener backlog). Once the GUI can then connect immediately without errors, the various timeouts then matter less, because the backend is no longer trying to race against the GUI's timeout. So keep retrying on errors for a minute, or 10 minutes if the system just booted in the past 10 minutes. This should fix the problem with Windows 10 desktops auto-logging in and starting the Tailscale frontend which was then showing a MessageBox error about failing to connect to tailscaled, which was slow coming up because the Windows networking stack wasn't up yet. Fingers crossed. Fixes #1313 (previously #1187, etc) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Alex Brainman	7689213aaa	cmd/tailscaled: add subcommands to install and remove tailscaled Windows service ... This change implements Windows version of install-system-daemon and uninstall-system-daemon subcommands. When running the commands the user will install or remove Tailscale Windows service. Updates #1232 Signed-off-by: Alex Brainman <alex.brainman@gmail.com>	4 years ago
Brad Fitzpatrick	f99e63bb17	ipn: don't Logout when Windows GUI disconnects ... Logout used to be a no-op, so the ipnserver previously synthensized a Logout on disconnect. Now that Logout actually invalidates the node key that was forcing all GUI closes to log people out. Instead, add a method to LocalBackend to specifically mean "the Windows GUI closed, please forget all the state". Fixes tailscale/corp#1591 (ignoring the notification issues, tracked elsewhere) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	f42ded7acf	cmd/tailscale/cli: relax & improve the running-as-CLI check for macOS ... On macOS, we link the CLI into the GUI executable so it can be included in the Mac App Store build. You then need to run it like: /Applications/Tailscale.app/Contents/MacOS/Tailscale <command> But our old detection of whether you're running that Tailscale binary in CLI mode wasn't accurate and often bit people. For instance, when they made a typo, it then launched in GUI mode and broke their existing GUI connection (starting a new IPNExtension) and took down their network. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	8f3e453356	ipn, cmd/tailscale/cli: add pref to configure sudo-free operator user ... From discussion with @danderson. Fixes #1684 (in a different way) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	49808ae6ea	ipn{,/ipnlocal}, cmd/tailscale/cli: don't check pref reverts on initial up ... The ipn.NewPrefs func returns a populated ipn.Prefs for historical reasons. It's not used or as important as it once was, but it hasn't yet been removed. Meanwhile, it contains some default values that are used on some platforms. Notably, for this bug (#1725), Windows/Mac use its Prefs.RouteAll true value (to accept subnets), but Linux users have always gotten a "false" value for that, because that's what cmd/tailscale's CLI default flag is _for all operating systems_. That meant that "tailscale up" was rightfully reporting that the user was changing an implicit setting: RouteAll was changing from true with false with the user explicitly saying so. An obvious fix might be to change ipn.NewPrefs to return Prefs.RouteAll == false on some platforms, but the logic is complicated by darwin: we want RouteAll true on windows, android, ios, and the GUI mac app, but not the CLI tailscaled-on-macOS mode. But even if we used build tags (e.g. the "redo" build tag) to determine what the default is, that then means we have duplicated and differing "defaults" between both the CLI up flags and ipn.NewPrefs. Furthering that complication didn't seem like a good idea. So, changing the NewPrefs defaults is too invasive at this stage of the release, as is removing the NewPrefs func entirely. Instead, tweak slightly the semantics of the ipn.Prefs.ControlURL field. This now defines that a ControlURL of the empty string means both "we're uninitialized" and also "just use the default". Then, once we have the "empty-string-means-unintialized" semantics, use that to suppress "tailscale up"'s recent implicit-setting-revert checking safety net, if we've never initialized Tailscale yet. And update/add tests. Fixes #1725 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	4df6e62fbc	ipn: add DefaultControlURL const, replace few literals with it ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	f1d45bc4bb	cmd/tailscale/cli: pull out prefsFromUpArgs for testability, add tests ... Will add more tests later but this locks in all the existing warnings and errors at least, and some of the existing non-error behavior. Mostly I want this to exist before I actually fix #1725. Updates #1725 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	4948ff6ecb	cmd/tailscale/cli: treat nil and non-nil zero length slices as equiv prefs ... Updates #1725 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	eb6115e295	cmd/tailscaled: let SOCKS5 dial non-Tailscale addrs in userspace mode ... Fixes #1617 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	2f422434aa	cmd/tailscale/cli: wait on the right contexts in up ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	6da812b4cf	cmd/tailscale/cli: avoid a spammy log message on SIGINT ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Ross Zurowski	c748c20fba	cmd/tailscale: fix command descriptions (#1710) ... Signed-off-by: Ross Zurowski <ross@rosszurowski.com>	4 years ago
Naman Sood	5ea53891fe	cmd/tailscaled: populate netstack variable to use dialer in SOCKS5 ... Signed-off-by: Naman Sood <mail@nsood.in>	4 years ago
Brad Fitzpatrick	75b99555f3	cmd/tailscale/cli: let ip take a peername ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	762180595d	ipn/ipnstate: add PeerStatus.TailscaleIPs slice, deprecate TailAddr ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago