222 Commits (eaf8aa63fcd02db66e9eda9edb442eb273d0619f)

Author	SHA1	Message	Date
Tom DNetto	a7c80c332a	cmd/sniproxy: implement support for control configuration, multiple addresses ... * Implement missing tests for sniproxy * Wire sniproxy to new appc package * Add support to tsnet for routing subnet router traffic into netstack, so it can be handled Updates: https://github.com/tailscale/corp/issues/15038 Signed-off-by: Tom DNetto <tom@tailscale.com>	1 year ago
Sonia Appasamy	89953b015b	ipn/ipnlocal,client/web: add web client to tailscaled ... Allows for serving the web interface from tailscaled, with the ability to start and stop the server via localapi endpoints (/web/start and /web/stop). This will be used to run the new full management web client, which will only be accessible over Tailscale (with an extra auth check step over noise) from the daemon. This switch also allows us to run the web interface as a long-lived service in environments where the CLI version is restricted to CGI, allowing us to manage certain auth state in memory. ipn/ipnlocal/web is stubbed out in ipn/ipnlocal/web_stub for ios builds to satisfy ios restriction from adding "text/template" and "html/template" dependencies. Updates tailscale/corp#14335 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	1 year ago
Tom DNetto	3df305b764	tsnet: enable use-cases with non-native IPs by setting ns.ProcessSubnets ... Terminating traffic to IPs which are not the native IPs of the node requires the netstack subsystem to intercept trafic to an IP it does not consider local. This PR switches on such interception. In addition to supporting such termination, this change will also enable exit nodes and subnet routers when running in userspace mode. DO NOT MERGE until 1.52 is cut. Signed-off-by: Tom DNetto <tom@tailscale.com> Updates: https://github.com/tailscale/corp/issues/15038	1 year ago
Brad Fitzpatrick	1fc3573446	ipn/{conffile,ipnlocal}: start booting tailscaled from a config file w/ auth key ... Updates #1412 Change-Id: Icd880035a31df59797b8379f4af19da5c4c453e2 Co-authored-by: Maisem Ali <maisem@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	6ca8650c7b	tstest/tstest: add t.Parallel that can be disabled by TS_SERIAL_TESTS=true ... Updates #9841 Change-Id: I1b8f4d6e34ac8540e3b0455a7c79bd400e2721b7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	4dec0c6eb9	tstest, tstest/integration, github/workflows: shard integration tests ... Over four jobs for now. Updates #cleanup Change-Id: Ic2b1a739a454916893945a3f9efc480d6fcbd70b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	18bd98d35b	cmd/tailscaled,*: add start of configuration file support ... Updates #1412 Co-authored-by: Maisem Ali <maisem@tailscale.com> Change-Id: I38d559c1784d09fc804f521986c9b4b548718f7d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	c363b9055d	tstest/integration: add tests for tun mode (requiring root) ... Updates #7894 Change-Id: Iff0b07b21ae28c712dd665b12918fa28d6f601d0 Co-authored-by: Maisem Ali <maisem@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	5c555cdcbb	tstest/integration: set race flag when cross compiling, conditionally fail on race ... Misc cleanups and things noticed while working on #7894 and pulled out of a separate change. Submitting them on their own to not distract from later changes. Updates #7894 Change-Id: Ie9abc8b88f121c559aeeb7e74db2aa532eb84d3d Co-authored-by: Maisem Ali <maisem@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Tom DNetto	da1b917575	net/tstun: finish wiring IPv6 NAT support ... Updates https://github.com/tailscale/corp/issues/11202 Updates ENG-991 Signed-off-by: Tom DNetto <tom@tailscale.com>	1 year ago
Brad Fitzpatrick	425cf9aa9d	tailcfg, all: use []netip.AddrPort instead of []string for Endpoints ... It's JSON wire compatible. Updates #cleanup Change-Id: Ifa5c17768fec35b305b06d75eb5f0611c8a135a6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Claire Wang	a56e58c244	util/syspolicy: add read boolean setting (#9592)	1 year ago
Tom DNetto	c08cf2a9c6	all: declare & plumb IPv6 masquerade address for peer ... This PR plumbs through awareness of an IPv6 SNAT/masquerade address from the wire protocol through to the low-level (tstun / wgengine). This PR is the first in two PRs for implementing IPv6 NAT support to/from peers. A subsequent PR will implement the data-plane changes to implement IPv6 NAT - this is just plumbing. Signed-off-by: Tom DNetto <tom@tailscale.com> Updates ENG-991	1 year ago
Maisem Ali	a61caea911	tailcfg: define a type for NodeCapability ... Instead of untyped string, add a type to identify these. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Brad Fitzpatrick	343c0f1031	wgengine{,/netstack}: remove AddNetworkMapCallback from Engine interface ... It had exactly one user: netstack. Just have LocalBackend notify netstack when here's a new netmap instead, simplifying the bloated Engine interface that has grown a bunch of non-Engine-y things. (plenty of rando stuff remains after this, but it's a start) Updates #cleanup Change-Id: I45e10ab48119e962fc4967a95167656e35b141d8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	39ade4d0d4	tstest/integration: add start of integration tests for incremental map updates ... This adds a new integration test with two nodes where the first gets a incremental MapResponse (with only PeersRemoved set) saying that the second node disappeared. This extends the testcontrol package to support sending raw MapResponses to nodes. Updates #1909 Change-Id: Iea0c25c19cf0d72b52dba5a46d01b5cc87b9b39d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	7c1ed38ab3	ipn/ipnlocal: fix missing controlknobs.Knobs plumbing ... I missed connecting some controlknobs.Knobs pieces in 4e91cf20a8 resulting in that breaking control knobs entirely. Whoops. The fix in ipn/ipnlocal (where it makes a new controlclient) but to atone, I also added integration tests. Those integration tests use a new "tailscale debug control-knobs" which by itself might be useful for future debugging. Updates #9351 Change-Id: Id9c89c8637746d879d5da67b9ac4e0d2367a3f0d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	9a86aa5732	all: depend on zstd unconditionally, remove plumbing to make it optional ... All platforms use it at this point, including iOS which was the original hold out for memory reasons. No more reason to make it optional. Updates #9332 Change-Id: I743fbc2f370921a852fbcebf4eb9821e2bdd3086 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	7175f06e62	util/rands: add package with HexString func ... We use it a number of places in different repos. Might as well make one. Another use is coming. Updates #cleanup Change-Id: Ib7ce38de0db35af998171edee81ca875102349a4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	055fdb235f	cmd/tailscaled, tstest/integration: make tailscaled die when parent dies ... I noticed that failed tests were leaving aroudn stray tailscaled processes on macOS at least. To repro, add this to tstest/integration: func TestFailInFewSeconds(t *testing.T) { t.Parallel() time.Sleep(3 * time.Second) os.Exit(1) t.Fatal("boom") } Those three seconds let the other parallel tests (with all their tailscaled child processes) start up and start running their tests, but then we violently os.Exit(1) the test driver and all the children were kept alive (and were spinning away, using all available CPU in gvisor scheduler code, which is a separate scary issue) Updates #cleanup Change-Id: I9c891ed1a1ec639fb2afec2808c04dbb8a460e0e Co-authored-by: Maisem Ali <maisem@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Maisem Ali	959362a1f4	ipn/ipnlocal,control/controlclient: make Logout more sync ... We already removed the async API, make it more sync and remove the FinishLogout state too. This also makes the callback be synchronous again as the previous attempt was trying to work around the logout callback resulting in a client shutdown getting blocked forever. Updates #3833 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Brad Fitzpatrick	98a5116434	all: adjust some build tags for plan9 ... I'm not saying it works, but it compiles. Updates #5794 Change-Id: I2f3c99732e67fe57a05edb25b758d083417f083e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Maisem Ali	02b47d123f	tailcfg: remove unused Domain field from Login/User ... Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Brad Fitzpatrick	25663b1307	tailcfg: remove most Debug fields, move bulk to nodeAttrs [capver 70] ... Now a nodeAttr: ForceBackgroundSTUN, DERPRoute, TrimWGConfig, DisableSubnetsIfPAC, DisableUPnP. Kept support for, but also now a NodeAttr: RandomizeClientPort. Removed: SetForceBackgroundSTUN, SetRandomizeClientPort (both never used, sadly... never got around to them. But nodeAttrs are better anyway), EnableSilentDisco (will be a nodeAttr later when that effort resumes). Updates #8923 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	e8551d6b40	all: use Go 1.21 slices, maps instead of x/exp/{slices,maps} ... Updates #8419 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Sonia Appasamy	7815fbe17a	tailscale/cli: add interactive flow for enabling Funnel ... Updates tailscale/corp#10577 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	1 year ago
Aaron Klotz	37925b3e7a	go.mod, cmd/tailscaled, ipn/localapi, util/osdiag, util/winutil, util/winutil/authenticode: add Windows module list to OS-specific logs that are written upon bugreport ... * We update wingoes to pick up new version information functionality (See pe/version.go in the https://github.com/dblohm7/wingoes repo); * We move the existing LogSupportInfo code (including necessary syscall stubs) out of util/winutil into a new package, util/osdiag, and implement the public LogSupportInfo function may be implemented for other platforms as needed; * We add a new reason argument to LogSupportInfo and wire that into localapi's bugreport implementation; * We add module information to the Windows implementation of LogSupportInfo when reason indicates a bugreport. We enumerate all loaded modules in our process, and for each one we gather debug, authenticode signature, and version information. Fixes #7802 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	1 year ago
Maisem Ali	1ecc16da5f	tailcfg,ipn/ipnlocal,wgengine: add values to PeerCapabilities ... Define PeerCapabilty and PeerCapMap as the new way of sending down inter-peer capability information. Previously, this was unstructured and you could only send down strings which got too limiting for certain usecases. Instead add the ability to send down raw JSON messages that are opaque to Tailscale but provide the applications to define them however they wish. Also update accessors to use the new values. Updates #4217 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Brad Fitzpatrick	6e967446e4	tsd: add package with System type to unify subsystem init, discovery ... This is part of an effort to clean up tailscaled initialization between tailscaled, tailscaled Windows service, tsnet, and the mac GUI. Updates #8036 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Mihai Parparita	4722f7e322	all: move network monitoring from wgengine/monitor to net/netmon ... We're using it in more and more places, and it's not really specific to our use of Wireguard (and does more just link/interface monitoring). Also removes the separate interface we had for it in sockstats -- it's a small enough package (we already pull in all of its dependencies via other paths) that it's not worth the extra complexity. Updates #7621 Updates #7850 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Maisem Ali	c3ef6fb4ee	ipn/ipnlocal: handle masquerade addresses in PeerAPI ... Without this, the peer fails to do anything over the PeerAPI if it has a masquerade address. ``` Apr 19 13:58:15 hydrogen tailscaled[6696]: peerapi: invalid request from <ip>:58334: 100.64.0.1/32 not found in self addresses ``` Updates #8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	64bbf1738e	tailcfg: make SelfNodeV4MasqAddrForThisPeer a pointer ... This makes `omitempty` actually work, and saves bytes in each map response. Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Anton Tolchanov	8546ff98fb	tsweb: move varz handler(s) into separate modules ... This splits Prometheus metric handlers exposed by tsweb into two modules: - `varz.Handler` exposes Prometheus metrics generated by our expvar converter; - `promvarz.Handler` combines our expvar-converted metrics and native Prometheus metrics. By default, tsweb will use the promvarz handler, however users can keep using only the expvar converter. Specifically, `tailscaled` now uses `varz.Handler` explicitly, which avoids a dependency on the (heavyweight) Prometheus client. Updates https://github.com/tailscale/corp/issues/10205 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	2 years ago
Maisem Ali	f6ea6863de	tstest/integration: add ping test w/ masquerades ... Updates tailscale/corp#8020 Co-authored-by: Melanie Warrick <warrick@tailscale.com> Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Will Norris	57a008a1e1	all: pass log IDs as the proper type rather than strings ... This change focuses on the backend log ID, which is the mostly commonly used in the client. Tests which don't seem to make use of the log ID just use the zero value. Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Maisem Ali	f34590d9ed	tsnet: add test for Funnel connections ... For the logic added in b797f77. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Andrew Dunham	3f8e8b04fd	cmd/tailscale, cmd/tailscaled: move portmapper debugging into tailscale CLI ... The debug flag on tailscaled isn't available in the macOS App Store build, since we don't have a tailscaled binary; move it to the 'tailscale debug' CLI that is available on all platforms instead, accessed over LocalAPI. Updates #7377 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I47bffe4461e036fab577c2e51e173f4003592ff7	2 years ago
Joe Tsai	0d19f5d421	all: replace logtail.{Public,Private}ID with logid.{Public,Private}ID (#7404) ... The log ID types were moved to a separate package so that code that only depend on log ID types do not need to link in the logic for the logtail client itself. Not all code need the logtail client. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
James Tucker	ee471ca1c8	tstest/integration: enable go lookups from $PATH ... Fixes tailscale/corp#9261 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Will Norris	947c14793a	all: update tools that manage copyright headers ... Update all code generation tools, and those that check for license headers to use the new standard header. Also update copyright statement in LICENSE file. Fixes #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers ... This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Andrew Dunham	b74db24149	tstest/integration: mark all integration tests as flaky ... Updates #7036 Change-Id: I3aec5ad680078199ba984bf8afc20b2f2eb37257 Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
Andrew Dunham	4fb663fbd2	various: mark more tests as flaky ... Updates #2855 Updates #3598 Updates #7008 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I2b849e04646456b9f0c8a01563f2add752f4b2a4	2 years ago
Brad Fitzpatrick	1116602d4c	ssh/tailssh: add OpenBSD support for Tailscale SSH ... And bump go.mod for https://github.com/u-root/u-root/pull/2593 Change-Id: I36ec94c5b2b76d671cb739f1e9a1a43ca1d9d1b1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Jordan Whited	ea5ee6f87c	all: update golang.zx2c4.com/wireguard to github.com/tailscale/wireguard-go (#6692) ... This is temporary while we work to upstream performance work in https://github.com/WireGuard/wireguard-go/pull/64. A replace directive is less ideal as it breaks dependent code without duplication of the directive. Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Aaron Klotz	98f21354c6	cmd/tailscaled: add a special command to tailscaled's Windows service for removing WinTun ... WinTun is installed lazily by tailscaled while it is running as LocalSystem. Based upon what we're seeing in bug reports and support requests, removing WinTun as a lesser user may fail under certain Windows versions, even when that user is an Administrator. By adding a user-defined command code to tailscaled, we can ask the service to do the removal on our behalf while it is still running as LocalSystem. * The uninstall code is basically the same as it is in corp; * The command code will be sent as a service control request and is protected by the SERVICE_USER_DEFINED_CONTROL access right, which requires Administrator. I'll be adding follow-up patches in corp to engage this functionality. Updates https://github.com/tailscale/tailscale/issues/6433 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	2 years ago
Brad Fitzpatrick	0cb2ccce7f	safesocket: remove the IPN protocol support ... Updates #6417 Change-Id: I78908633de842d83b2cc8b10a864a0f88ab1b113 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	3b0de97e07	cmd/tailscaled: unify the two Windows paths + separate IPN server path ... tailscaled on Windows had two entirely separate start-up paths for running as a service vs in the foreground. It's been causing problems for ages. This unifies the two paths, making them be the same as the path used for every other platform. Also, it uses the new async LocalBackend support in ipnserver.Server so the Server can start serving HTTP immediately, even if tun takes awhile to come up. Updates #6535 Change-Id: Icc8c4f96d4887b54a024d7ac15ad11096b5a58cf Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	e8cc78b1af	ipn/ipnserver: change Server to let LocalBackend be supplied async ... This is step 1 of de-special-casing of Windows and letting the LocalAPI HTTP server start serving immediately, even while the rest of the world (notably the Engine and its TUN device) are being created, which can take a few to dozens of seconds on Windows. With this change, the ipnserver.New function changes to not take an Engine and to return immediately, not returning an error, and let its Run run immediately. If its ServeHTTP is called when it doesn't yet have a LocalBackend, it returns an error. A TODO in there shows where a future handler will serve status before an engine is available. Future changes will: * delete a bunch of tailscaled_windows.go code and use this new API * add the ipnserver.Server ServerHTTP handler to await the engine being available * use that handler in the Windows GUI client Updates #6522 Change-Id: Iae94e68c235e850b112a72ea24ad0e0959b568ee Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Aaron Klotz	033bd94d4c	cmd/tailscaled, wgengine/router: use wingoes/com for COM initialization instead of go-ole ... This patch removes the crappy, half-backed COM initialization used by `go-ole` and replaces that with the `StartRuntime` function from `wingoes`, a library I have started which, among other things, initializes COM properly. In particular, we should always be initializing COM to use the multithreaded apartment. Every single OS thread in the process becomes implicitly initialized as part of the MTA, so we do not need to concern ourselves as to whether or not any particular OS thread has initialized COM. Furthermore, we no longer need to lock the OS thread when calling methods on COM interfaces. Single-threaded apartments are designed solely for working with Win32 threads that have a message pump; any other use of the STA is invalid. Fixes https://github.com/tailscale/tailscale/issues/3137 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	2 years ago