Commit Graph

38 Commits (ea9dd8fabc64d7f4d054c2c45743728129f1430b)

Author SHA1 Message Date
Tom DNetto c08cf2a9c6 all: declare & plumb IPv6 masquerade address for peer
This PR plumbs through awareness of an IPv6 SNAT/masquerade address from the wire protocol
through to the low-level (tstun / wgengine). This PR is the first in two PRs for implementing
IPv6 NAT support to/from peers.

A subsequent PR will implement the data-plane changes to implement IPv6 NAT - this is just plumbing.

Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates ENG-991
1 year ago
Maisem Ali 3ae7140690 net/tstun: handle exit nodes in NAT configs
In the case where the exit node requires SNAT, we would SNAT all traffic not just the
traffic meant to go through the exit node. This was a result of the default route being
added to the routing table which would match basically everything.

In this case, we need to account for all peers in the routing table not just the ones
that require NAT.

Fix and add a test.

Updates tailscale/corp#8020

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago
Andrew Dunham 04a3118d45 net/tstun: add tests for captureHook
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I630f852d9f16c951c721b34f2bc4128e68fe9475
2 years ago
Maisem Ali 64bbf1738e tailcfg: make SelfNodeV4MasqAddrForThisPeer a pointer
This makes `omitempty` actually work, and saves bytes in each map response.

Updates tailscale/corp#8020

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago
Tom DNetto 6a627e5a33 net, wgengine/capture: encode NAT addresses in pcap stream
Signed-off-by: Tom DNetto <tom@tailscale.com>
2 years ago
Maisem Ali 985535aebc net/tstun,wgengine/*: add support for NAT to routes
This adds support to make exit nodes and subnet routers work
when in scenarios where NAT is required.

It also updates the NATConfig to be generated from a `wgcfg.Config` as
that handles merging prefs with the netmap, so it has the required information
about whether an exit node is already configured and whether routes are accepted.

Updates tailscale/corp#8020

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago
Maisem Ali bb31fd7d1c net/tstun: add inital support for NAT v4
This adds support in tstun to utitilize the SelfNodeV4MasqAddrForThisPeer and
perform the necessary modifications to the packet as it passes through tstun.

Currently this only handles ICMP, UDP and TCP traffic.
Subnet routers and Exit Nodes are also unsupported.

Updates tailscale/corp#8020

Co-authored-by: Melanie Warrick <warrick@tailscale.com>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago
Maisem Ali 535fad16f8 net/tstun: rename filterIn/filterOut methods to be more descriptive
Updates tailscale/corp#8020

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago
Will Norris 71029cea2d all: update copyright and license headers
This updates all source files to use a new standard header for copyright
and license declaration.  Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.

This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.

Updates #6865

Signed-off-by: Will Norris <will@tailscale.com>
2 years ago
andig 5f96d6211a Remove redundant type declaration
Signed-off-by: andig <cpuidle@gmx.de>
2 years ago
Brad Fitzpatrick 6d85a94767 net/{packet,tstun}: fix typo in test helper docs
Change-Id: Ifc1684fe77c7d2585e049e0dfd7340910c47a67a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Brad Fitzpatrick c1a2e2c380 net/{packet,tstun},wgengine/filter: fix unknown IP protocol handling
01b90df2fa added SCTP support before
(with explicit parsing for ports) and
69de3bf7bf tried to add support for
arbitrary IP protocols (as long as the ACL permited a port of "*",
since we might not know how to find ports from an arbitrary IP
protocol, if it even has such a concept). But apparently that latter
commit wasn't tested end-to-end enough. It had a lot of tests, but the
tests made assumptions about layering that either weren't true, or
regressed since 1.20. Notably, it didn't remove the (*Filter).pre
bidirectional filter that dropped all "unknown" protocol packets both
leaving and entering, even if there were explicit protocol matches
allowing them in.

Also, don't map all unknown protocols to 0. Keep their IP protocol
number parsed so it's matchable by later layers. Only reject illegal
things.

Fixes #6423
Updates #2162
Updates #2163

Change-Id: I9659b3ece86f4db51d644f9b34df78821758842c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Joe Tsai d9df023e6f
net/connstats: enforce maximum number of connections (#6760)
The Tailscale logging service has a hard limit on the maximum
log message size that can be accepted.
We want to ensure that netlog messages never exceed
this limit otherwise a client cannot transmit logs.

Move the goroutine for periodically dumping netlog messages
from wgengine/netlog to net/connstats.
This allows net/connstats to manage when it dumps messages,
either based on time or by size.

Updates tailscale/corp#8427

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
2 years ago
Jordan Whited ea5ee6f87c
all: update golang.zx2c4.com/wireguard to github.com/tailscale/wireguard-go (#6692)
This is temporary while we work to upstream performance work in
https://github.com/WireGuard/wireguard-go/pull/64. A replace directive
is less ideal as it breaks dependent code without duplication of the
directive.

Signed-off-by: Jordan Whited <jordan@tailscale.com>
2 years ago
Maisem Ali eb1adf629f net/tstun: reuse buffered packet from pool
We would call parsedPacketPool.Get() for all packets received in Read/Write.
This was wasteful and not necessary, fetch a single *packet.Parsed for
all packets.

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago
Jordan Whited 76389d8baf
net/tstun, wgengine/magicsock: enable vectorized I/O on Linux (#6663)
This commit updates the wireguard-go dependency and implements the
necessary changes to the tun.Device and conn.Bind implementations to
support passing vectors of packets in tailscaled. This significantly
improves throughput performance on Linux.

Updates #414

Signed-off-by: Jordan Whited <jordan@tailscale.com>
Signed-off-by: James Tucker <james@tailscale.com>
Co-authored-by: James Tucker <james@tailscale.com>
2 years ago
Joe Tsai 2e5d08ec4f
net/connstats: invert network logging data flow (#6272)
Previously, tstun.Wrapper and magicsock.Conn managed their
own statistics data structure and relied on an external call to
Extract to extract (and reset) the statistics.
This makes it difficult to ensure a maximum size on the statistics
as the caller has no introspection into whether the number
of unique connections is getting too large.

Invert the control flow such that a *connstats.Statistics
is registered with tstun.Wrapper and magicsock.Conn.
Methods on non-nil *connstats.Statistics are called for every packet.
This allows the implementation of connstats.Statistics (in the future)
to better control when it needs to flush to ensure
bounds on maximum sizes.

The value registered into tstun.Wrapper and magicsock.Conn could
be an interface, but that has two performance detriments:

1. Method calls on interface values are more expensive since
they must go through a virtual method dispatch.

2. The implementation would need a sync.Mutex to protect the
statistics value instead of using an atomic.Pointer.

Given that methods on constats.Statistics are called for every packet,
we want reduce the CPU cost on this hot path.

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
2 years ago
Joe Tsai c21a3c4733
types/netlogtype: new package for network logging types (#6092)
The netlog.Message type is useful to depend on from other packages,
but doing so would transitively cause gvisor and other large packages
to be linked in.

Avoid this problem by moving all network logging types to a single package.

We also update staticcheck to take in:

	003d277bcf

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
2 years ago
Joe Tsai 84e8f25c21
net/tstun: rename statististics method (#5852)
Rename StatisticsEnable as SetStatisticsEnabled to be consistent
with other similarly named methods.

Rename StatisticsExtract as ExtractStatistics to follow
the convention where methods start with a verb.
It was originally named with Statistics as a prefix so that
statistics related methods would sort well in godoc,
but that property no longer holds.

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
2 years ago
Joe Tsai 24ebf161e8
net/tstun: instrument Wrapper with statistics gathering (#5847)
If Wrapper.StatisticsEnable is enabled,
then per-connection counters are maintained.
If enabled, Wrapper.StatisticsExtract must be periodically called
otherwise there is unbounded memory growth.

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
2 years ago
Brad Fitzpatrick a12aad6b47 all: convert more code to use net/netip directly
perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.)
    perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. )
    perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. )
    perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. )
    perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. )
    perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. )
    goimports -w .

Then delete some stuff from the net/netaddr shim package which is no
longer neeed.

Updates #5162

Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Brad Fitzpatrick 6a396731eb all: use various net/netip parse funcs directly
Mechanical change with perl+goimports.

Changed {Must,}Parse{IP,IPPrefix,IPPort} to their netip variants, then
goimports -d .

Finally, removed the net/netaddr wrappers, to prevent future use.

Updates #5162

Change-Id: I59c0e38b5fbca5a935d701645789cddf3d7863ad
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Brad Fitzpatrick 7eaf5e509f net/netaddr: start migrating to net/netip via new netaddr adapter package
Updates #5162

Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Josh Bleecher Snyder 73beaaf360 net/tstun: rate limit "self disco out packet" logging
When this happens, it is incredibly noisy in the logs.
It accounts for about a third of all remaining
"unexpected" log lines from a recent investigation.

It's not clear that we know how to fix this,
we have a functioning workaround,
and we now have a (cheap and efficient) metric for this
that we can use for measurements.

So reduce the logging to approximately once per minute.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
David Anderson 0532eb30db all: replace tailcfg.DiscoKey with key.DiscoPublic.
Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
Josh Bleecher Snyder 94fb42d4b2 all: use testingutil.MinAllocsPerRun
There are a few remaining uses of testing.AllocsPerRun:
Two in which we only log the number of allocations,
and one in which dynamically calculate the allocations
target based on a different AllocsPerRun run.

This also allows us to tighten the "no allocs"
test in wgengine/filter.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Brad Fitzpatrick 080381c79f net/tstun: block looped disco traffic, take 17
It was in the wrong filter direction before, per CPU profiles
we now have.

Updates #1526 (maybe fixes? time will tell)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick dabeda21e0 net/tstun: block looped disco traffic
Updates #1526 (maybe fixes? time will tell)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Emmanuel T Odeke 0daa32943e all: add (*testing.B).ReportAllocs() to every benchmark
This ensures that we can properly track and catch allocation
slippages that could otherwise have been missed.

Fixes #2748
3 years ago
Josh Bleecher Snyder c2202cc27c net/tstun: use mono.Time
There's a call to Now once per packet.
Move to mono.Now.

Though the current implementation provides high precision,
we document it to be coarse, to preserve the ability
to switch to a coarse monotonic time later.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Brad Fitzpatrick a321c24667 go.mod: update netaddr
Involves minor IPSetBuilder.Set API change.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Josh Bleecher Snyder 1ece91cede go.mod: upgrade wireguard-windows, de-fork wireguard-go
Pull in the latest version of wireguard-windows.

Switch to upstream wireguard-go.
This requires reverting all of our import paths.

Unfortunately, this has to happen at the same time.
The wireguard-go change is very low risk,
as that commit matches our fork almost exactly.
(The only changes are import paths, CI files, and a go.mod entry.)
So if there are issues as a result of this commit,
the first place to look is wireguard-windows changes.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
4 years ago
Josh Bleecher Snyder 25df067dd0 all: adapt to opaque netaddr types
This commit is a mishmash of automated edits using gofmt:

gofmt -r 'netaddr.IPPort{IP: a, Port: b} -> netaddr.IPPortFrom(a, b)' -w .
gofmt -r 'netaddr.IPPrefix{IP: a, Port: b} -> netaddr.IPPrefixFrom(a, b)' -w .

gofmt -r 'a.IP.Is4 -> a.IP().Is4' -w .
gofmt -r 'a.IP.As16 -> a.IP().As16' -w .
gofmt -r 'a.IP.Is6 -> a.IP().Is6' -w .
gofmt -r 'a.IP.As4 -> a.IP().As4' -w .
gofmt -r 'a.IP.String -> a.IP().String' -w .

And regexps:

\w*(.*)\.Port = (.*)  ->  $1 = $1.WithPort($2)
\w*(.*)\.IP = (.*)  ->  $1 = $1.WithIP($2)

And lots of manual fixups.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
4 years ago
Brad Fitzpatrick 7f2eb1d87a net/tstun: fix TUN log spam when ACLs drop a packet
Whenever we dropped a packet due to ACLs, wireguard-go was logging:

Failed to write packet to TUN device: packet dropped by filter

Instead, just lie to wireguard-go and pretend everything is okay.

Fixes #1229

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick 939861773d net/tstun: accept peerapi connections through the filter
Fixes tailscale/corp#1545

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
David Anderson 016de16b2e net/tstun: rename TUN to Wrapper.
The tstun packagen contains both constructors for generic tun
Devices, and a wrapper that provides additional functionality.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson 82ab7972f4 net/tstun: rename NewFakeTUN to NewFake.
Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson 588b70f468 net/tstun: merge in wgengine/tstun.
Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago