tailscale

Commit Graph

Author	SHA1	Message	Date
Jordan Whited	adb7a86559	cmd/stunc: support ipv6 address targets (#12166 ) Updates #cleanup Signed-off-by: Jordan Whited <jordan@tailscale.com>	7 months ago
James Tucker	8d1249550a	net/netcheck,wgengine/magicsock: add potential workaround for Palo Alto DIPP misbehavior Palo Alto firewalls have a typically hard NAT, but also have a mode called Persistent DIPP that is supposed to provide consistent port mapping suitable for STUN resolution of public ports. Persistent DIPP works initially on most Palo Alto firewalls, but some models/software versions have a bug which this works around. The bug symptom presents as follows: - STUN sessions resolve a consistent public IP:port to start with - Much later netchecks report the same IP:Port for a subset of sessions, most often the users active DERP, and/or the port related to sustained traffic. - The broader set of DERPs in a full netcheck will now consistently observe a new IP:Port. - After this point of observation, new inbound connections will only succeed to the new IP:Port observed, and existing/old sessions will only work to the old binding. In this patch we now advertise the lowest latency global endpoint discovered as we always have, but in addition any global endpoints that are observed more than once in a single netcheck report. This should provide viable endpoints for potential connection establishment across a NAT with this behavior. Updates tailscale/corp#19106 Signed-off-by: James Tucker <james@tailscale.com>	7 months ago
Andrea Gottardo	e5f67f90a2	xcode: allow ICMP ping relay on macOS + iOS platforms (#12048 ) Fixes tailscale/tailscale#10393 Fixes tailscale/corp#15412 Fixes tailscale/corp#19808 On Apple platforms, exit nodes and subnet routers have been unable to relay pings from Tailscale devices to non-Tailscale devices due to sandbox restrictions imposed on our network extensions by Apple. The sandbox prevented the code in netstack.go from spawning the `ping` process which we were using. Replace that exec call with logic to send an ICMP echo request directly, which appears to work in userspace, and not trigger a sandbox violation in the syslog. Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	7 months ago
Irbe Krumina	76c30e014d	cmd/containerboot: warn when an ingress proxy with an IPv4 tailnet address is being created for an IPv6 backend(s) (#12159 ) Updates tailscale/tailscale#12156 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Maisem Ali	486a423716	tsnet: split user facing and backend logging This adds a new `UserLogf` field to the `Server` struct. When set this any logs generated by Server are logged using `UserLogf` and all spammy backend logs are logged to `Logf`. If it `UserLogf` is unset, we default to `log.Printf` and if `Logf` is unset we discard all the spammy logs. Fixes #12094 Signed-off-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Irbe Krumina	d86d1e7601	cmd/k8s-operator,cmd/containerboot,ipn,k8s-operator: turn off stateful filter for egress proxies. (#12075 ) Turn off stateful filtering for egress proxies to allow cluster traffic to be forwarded to tailnet. Allow configuring stateful filter via tailscaled config file. Deprecate EXPERIMENTAL_TS_CONFIGFILE_PATH env var and introduce a new TS_EXPERIMENTAL_VERSIONED_CONFIG env var that can be used to provide containerboot a directory that should contain one or more tailscaled config files named cap-<tailscaled-cap-version>.hujson. Containerboot will pick the one with the newest capability version that is not newer than its current capability version. Proxies with this change will not work with older Tailscale Kubernetes operator versions - users must ensure that the deployed operator is at the same version or newer (up to 4 version skew) than the proxies. Updates tailscale/tailscale#12061 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Maisem Ali	21abb7f402	cmd/tailscale: add missing set flags for linux We were missing `snat-subnet-routes`, `stateful-filtering` and `netfilter-mode`. Add those to set too. Fixes #12061 Signed-off-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Irbe Krumina	b5dbf155b1	cmd/k8s-operator: default nameserver image to tailscale/k8s-nameserver:unstable (#11991 ) We are now publishing nameserver images to tailscale/k8s-nameserver, so we can start defaulting the images if users haven't set them explicitly, same as we already do with proxy images. The nameserver images are currently only published for unstable track, so we have to use the static 'unstable' tag. Once we start publishing to stable, we can make the operator default to its own tag (because then we'll know that for each operator tag X there is also a nameserver tag X as we always cut all images for a given tag. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Brad Fitzpatrick	e968b0ecd7	cmd/tailscale,controlclient,ipnlocal: fix 'up', deflake tests more The CLI's "up" is kinda chaotic and LocalBackend.Start is kinda chaotic and they both need to be redone/deleted (respectively), but this fixes some buggy behavior meanwhile. We were previously calling StartLoginInteractive (to start the controlclient's RegisterRequest) redundantly in some cases, causing test flakes depending on timing and up's weird state machine. We only need to call StartLoginInteractive in the client if Start itself doesn't. But Start doesn't tell us that. So cheat a bit and a put the information about whether there's a current NodeKey in the ipn.Status. It used to be accessible over LocalAPI via GetPrefs as a private key but we removed that for security. But a bool is fine. So then only call StartLoginInteractive if that bool is false and don't do it in the WatchIPNBus loop. Fixes #12028 Updates #12042 Change-Id: I0923c3f704a9d6afd825a858eb9a63ca7c1df294 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	727c0d6cfd	ipn/ipnserver: close a small race in ipnserver, ~simplify code There was a small window in ipnserver after we assigned a LocalBackend to the ipnserver's atomic but before we Start'ed it where our initalization Start could conflict with API calls from the LocalAPI. Simplify that a bit and lay out the rules in the docs. Updates #12028 Change-Id: Ic5f5e4861e26340599184e20e308e709edec68b1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Andrew Lytvynov	471731771c	ipn/ipnlocal: set default NoStatefulFiltering in ipn.NewPrefs (#12031 ) This way the default gets populated on first start, when no existing state exists to migrate. Also fix `ipn.PrefsFromBytes` to preserve empty fields, rather than layering `NewPrefs` values on top. Updates https://github.com/tailscale/corp/issues/19623 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	7 months ago
Paul Scott	78fa698fe6	cmd/tailscale/cli/ffcomplete: remove fullstop from ShortHelp Updates #cleanup Signed-off-by: Paul Scott <paul@tailscale.com>	7 months ago
Andrew Lytvynov	c28f5767bf	various: implement stateful firewalling on Linux (#12025 ) Updates https://github.com/tailscale/corp/issues/19623 Change-Id: I7980e1fb736e234e66fa000d488066466c96ec85 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Co-authored-by: Andrew Dunham <andrew@du.nham.ca>	7 months ago
Brad Fitzpatrick	f3d2fd22ef	cmd/tailscale/cli: don't start WatchIPNBus until after up's initial Start The CLI "up" command is a historical mess, both on the CLI side and the LocalBackend side. We're getting closer to cleaning it up, but in the meantime it was again implicated in flaky tests. In this case, the background goroutine running WatchIPNBus was very occasionally running enough to get to its StartLoginInteractive call before the original goroutine did its Start call. That meant integration tests were very rarely but sometimes logging in with the default control plane URL out on the internet (controlplane.tailscale.com) instead of the localhost control server for tests. This also might've affected new Headscale etc users on initial "up". Fixes #11960 Fixes #11962 Change-Id: I36f8817b69267a99271b5ee78cb7dbf0fcc0bd34 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Nick Khyl	caa3d7594f	ipn/ipnlocal, net/tsdial: plumb routes into tsdial and use them in UserDial We'd like to use tsdial.Dialer.UserDial instead of SystemDial for DNS over TCP. This is primarily necessary to properly dial internal DNS servers accessible over Tailscale and subnet routes. However, to avoid issues when switching between Wi-Fi and cellular, we need to ensure that we don't retain connections to any external addresses on the old interface. Therefore, we need to determine which dialer to use internally based on the configured routes. This plumbs routes and localRoutes from router.Config to tsdial.Dialer, and updates UserDial to use either the peer dialer or the system dialer, depending on the network address and the configured routes. Updates tailscale/corp#18725 Fixes #4529 Signed-off-by: Nick Khyl <nickk@tailscale.com>	7 months ago
Brad Fitzpatrick	c3c18027c6	all: make more tests pass/skip in airplane mode Updates tailscale/corp#19786 Change-Id: Iedc6730fe91c627b556bff5325bdbaf7bf79d8e6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Irbe Krumina	406293682c	cmd/k8s-operator: cleanup runReconciler signature (#11993 ) Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Brad Fitzpatrick	15fc6cd966	derp/derphttp: fix netcheck HTTPS probes The netcheck client, when no UDP is available, probes distance using HTTPS. Several problems: * It probes using /derp/latency-check. * But cmd/derper serves the handler at /derp/probe * Despite the difference, it work by accident until `c8f4dfc8c0` which made netcheck's probe require a 2xx status code. * in tests, we only use derphttp.Handler, so the cmd/derper-installed mux routes aren't preesnt, so there's no probe. That breaks tests in airplane mode. netcheck.Client then reports "unexpected HTTP status 426" (Upgrade Required) This makes derp handle both /derp/probe and /derp/latency-check equivalently, and in both cmd/derper and derphttp.Handler standalone modes. I notice this when wgengine/magicsock TestActiveDiscovery was failing in airplane mode (no wifi). It still doesn't pass, but it gets further. Fixes #11989 Change-Id: I45213d4bd137e0f29aac8bd4a9ac92091065113f	7 months ago
Brad Fitzpatrick	1fe0983f2d	cmd/derper,tstest/nettest: skip network-needing test in airplane mode Not buying wifi on a short flight is a good way to find tests that require network. Whoops. Updates #cleanup Change-Id: Ibe678e9c755d27269ad7206413ffe9971f07d298 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Irbe Krumina	cd633a7252	cmd/k8s-operator/deploy,k8s-operator: document that metrics are unstable (#11979 ) Updates#11292 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	19b31ac9a6	cmd/{k8s-operator,k8s-nameserver},k8s-operator: update nameserver config with records for ingress/egress proxies (#11019 ) cmd/k8s-operator: optionally update dnsrecords Configmap with DNS records for proxies. This commit adds functionality to automatically populate DNS records for the in-cluster ts.net nameserver to allow cluster workloads to resolve MagicDNS names associated with operator's proxies. The records are created as follows: * For tailscale Ingress proxies there will be a record mapping the MagicDNS name of the Ingress device and each proxy Pod's IP address. * For cluster egress proxies, configured via tailscale.com/tailnet-fqdn annotation, there will be a record for each proxy Pod, mapping the MagicDNS name of the exposed tailnet workload to the proxy Pod's IP. No records will be created for any other proxy types. Records will only be created if users have configured the operator to deploy an in-cluster ts.net nameserver by applying tailscale.com/v1alpha1.DNSConfig. It is user's responsibility to add the ts.net nameserver as a stub nameserver for ts.net DNS names. https://kubernetes.io/docs/tasks/administer-cluster/dns-custom-nameservers/#configuration-of-stub-domain-and-upstream-nameserver-using-coredns https://cloud.google.com/kubernetes-engine/docs/how-to/kube-dns#upstream_nameservers See also https://github.com/tailscale/tailscale/pull/11017 Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Paul Scott	4c08410011	cmd/tailscale/cli: set localClient.UseSocketOnly during flag parsing This configures localClient correctly during flag parsing, so that the --socket option is effective when generating tab-completion results. For example, the following would not connect to the system Tailscale for tab-completion results: tailscale --socket=/tmp/tailscaled.socket switch <TAB> Updates #3793 Signed-off-by: Paul Scott <paul@tailscale.com>	7 months ago
Paul Scott	ba34943133	cmd/tailscale/cli/ffcomplete: omit and clean completion results Updates #3793 Signed-off-by: Paul Scott <paul@tailscale.com>	7 months ago
Gabe Gorelick	de85610be0	cmd/k8s-operator/deploy/chart: allow users to configure additional labels for the operator's Pod via Helm chart values. cmd/k8s-operator/deploy/chart: allow users to configure additional labels for the operator's Pod via Helm chart values. Fixes #11947 Signed-off-by: Gabe Gorelick <gabe@hightouch.io>	7 months ago
Irbe Krumina	44aa809cb0	cmd/{k8s-nameserver,k8s-operator},k8s-operator: add a kube nameserver, make operator deploy it (#11919 ) * cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster. Adds a simple nameserver that can respond to A record queries for ts.net DNS names. It can respond to queries from in-memory records, populated from a ConfigMap mounted at /config. It dynamically updates its records as the ConfigMap contents changes. It will respond with NXDOMAIN to queries for any other record types (AAAA to be implemented in the future). It can respond to queries over UDP or TCP. It runs a miekg/dns DNS server with a single registered handler for ts.net domain names. Queries for other domain names will be refused. The intended use of this is: 1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet services exposed via Tailscale operator egress over HTTPS 2) to allow non-tailnet cluster workloads to talk to workloads in the same cluster that have been exposed to tailnet over their MagicDNS names but on their cluster IPs. DNSConfig CRD can be used to configure the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	7d9c3f9897	cmd/k8s-operator/deploy/manifests: check if IPv6 module is loaded before using it (#11867 ) Before attempting to enable IPv6 forwarding in the proxy init container check if the relevant module is found, else the container crashes on hosts that don't have it. Updates#11860 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Andrew Lytvynov	ce5c80d0fe	clientupdate: exec systemctl instead of using dbus to restart (#11923 ) Shell out to "systemctl", which lets us drop an extra dependency. Updates https://github.com/tailscale/corp/issues/18935 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	7 months ago
Irbe Krumina	1452faf510	cmd/containerboot,kube,ipn/store/kubestore: allow interactive login on kube, check Secret create perms, allow empty state Secret (#11326 ) cmd/containerboot,kube,ipn/store/kubestore: allow interactive login and empty state Secrets, check perms * Allow users to pre-create empty state Secrets * Add a fake internal kube client, test functionality that has dependencies on kube client operations. * Fix an issue where interactive login was not allowed in an edge case where state Secret does not exist * Make the CheckSecretPermissions method report whether we have permissions to create/patch a Secret if it's determined that these operations will be needed Updates tailscale/tailscale#11170 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Brad Fitzpatrick	b9adbe2002	net/{interfaces,netmon}, all: merge net/interfaces package into net/netmon In prep for most of the package funcs in net/interfaces to become methods in a long-lived netmon.Monitor that can cache things. (Many of the funcs are very heavy to call regularly, whereas the long-lived netmon.Monitor can subscribe to things from the OS and remember answers to questions it's asked regularly later) Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	6b95219e3a	net/netmon, add: add netmon.State type alias of interfaces.State ... in prep for merging the net/interfaces package into net/netmon. This is a no-op change that updates a bunch of the API signatures ahead of a future change to actually move things (and remove the type alias) Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I477613388f09389214db0d77ccf24a65bff2199c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Irbe Krumina	45f0721530	cmd/containerboot: wait on tailscaled process only (#11897 ) Modifies containerboot to wait on tailscaled process only, not on any child process of containerboot. Waiting on any subprocess was racing with Go's exec.Cmd.Run, used to run iptables commands and that starts its own subprocesses and waits on them. Containerboot itself does not run anything else except for tailscaled, so there shouldn't be a need to wait on anything else. Updates tailscale/tailscale#11593 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Brad Fitzpatrick	3672f29a4e	net/netns, net/dns/resolver, etc: make netmon required in most places The goal is to move more network state accessors to netmon.Monitor where they can be cheaper/cached. But first (this change and others) we need to make sure the one netmon.Monitor is plumbed everywhere. Some notable bits: * tsdial.NewDialer is added, taking a now-required netmon * because a tsdial.Dialer always has a netmon, anything taking both a Dialer and a NetMon is now redundant; take only the Dialer and get the NetMon from that if/when needed. * netmon.NewStatic is added, primarily for tests Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	7a62dddeac	net/netcheck, wgengine/magicsock: make netmon.Monitor required This has been a TODO for ages. Time to do it. The goal is to move more network state accessors to netmon.Monitor where they can be cheaper/cached. Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I60fc6508cd2d8d079260bda371fc08b6318bcaf1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	745931415c	health, all: remove health.Global, finish plumbing health.Tracker Updates #11874 Updates #4136 Change-Id: I414470f71d90be9889d44c3afd53956d9f26cd61 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	6d69fc137f	ipn/{ipnlocal,localapi},wgengine{,/magicsock}: plumb health.Tracker Down to 25 health.Global users. After this remains controlclient & net/dns & wgengine/router. Updates #11874 Updates #4136 Change-Id: I6dd1856e3d9bf523bdd44b60fb3b8f7501d5dc0d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Irbe Krumina	df8f40905b	cmd/k8s-operator,k8s-operator: optionally serve tailscaled metrics on Pod IP (#11699 ) Adds a new .spec.metrics field to ProxyClass to allow users to optionally serve client metrics (tailscaled --debug) on <Pod-IP>:9001. Metrics cannot currently be enabled for proxies that egress traffic to tailnet and for Ingress proxies with tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation (because they currently forward all cluster traffic to their respective backends). The assumption is that users will want to have these metrics enabled continuously to be able to monitor proxy behaviour (as opposed to enabling them temporarily for debugging). Hence we expose them on Pod IP to make it easier to consume them i.e via Prometheus PodMonitor. Updates tailscale/tailscale#11292 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Brad Fitzpatrick	723c775dbb	tsd, ipnlocal, etc: add tsd.System.HealthTracker, start some plumbing This adds a health.Tracker to tsd.System, accessible via a new tsd.System.HealthTracker method. In the future, that new method will return a tsd.System-specific HealthTracker, so multiple tsnet.Servers in the same process are isolated. For now, though, it just always returns the temporary health.Global value. That permits incremental plumbing over a number of changes. When the second to last health.Global reference is gone, then the tsd.System.HealthTracker implementation can return a private Tracker. The primary plumbing this does is adding it to LocalBackend and its dozen and change health calls. A few misc other callers are also plumbed. Subsequent changes will flesh out other parts of the tree (magicsock, controlclient, etc). Updates #11874 Updates #4136 Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Lee Briggs	14ac41febc	cmd/k8s-operator,k8s-operator: proxyclass affinity (#11862 ) add ability to set affinity rules to proxyclass Updates#11861 Signed-off-by: Lee Briggs <lee@leebriggs.co.uk>	7 months ago
Irbe Krumina	3af0f526b8	cmd{containerboot,k8s-operator},util/linuxfw: support ExternalName Services (#11802 ) * cmd/containerboot,util/linuxfw: support proxy backends specified by DNS name Adds support for optionally configuring containerboot to proxy traffic to backends configured by passing TS_EXPERIMENTAL_DEST_DNS_NAME env var to containerboot. Containerboot will periodically (every 10 minutes) attempt to resolve the DNS name and ensure that all traffic sent to the node's tailnet IP gets forwarded to the resolved backend IP addresses. Currently: - if the firewall mode is iptables, traffic will be load balanced accross the backend IP addresses using round robin. There are no health checks for whether the IPs are reachable. - if the firewall mode is nftables traffic will only be forwarded to the first IP address in the list. This is to be improved. * cmd/k8s-operator: support ExternalName Services Adds support for exposing endpoints, accessible from within a cluster to the tailnet via DNS names using ExternalName Services. This can be done by annotating the ExternalName Service with tailscale.com/expose: "true" annotation. The operator will deploy a proxy configured to route tailnet traffic to the backend IPs that service.spec.externalName resolves to. The backend IPs must be reachable from the operator's namespace. Updates tailscale/tailscale#10606 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Joe Tsai	63b3c82587	ipn/local: log OS-specific diagnostic information as JSON (#11700 ) There is an undocumented 16KiB limit for text log messages. However, the limit for JSON messages is 256KiB. Even worse, logging JSON as text results in significant overhead since each double quote needs to be escaped. Instead, use logger.Logf.JSON to explicitly log the info as JSON. We also modify osdiag to return the information as structured data rather than implicitly have the package log on our behalf. This gives more control to the caller on how to log. Updates #7802 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	7 months ago
Sonia Appasamy	0a84215036	release/dist/qnap: add qnap target builder Creates new QNAP builder target, which builds go binaries then uses docker to build into QNAP packages. Much of the docker/script code here is pulled over from https://github.com/tailscale/tailscale-qpkg, with adaptation into our builder structures. The qnap/Tailscale folder contains static resources needed to build Tailscale qpkg packages, and is an exact copy of the existing folder in the tailscale-qpkg repo. Builds can be run with: ``` sudo ./tool/go run ./cmd/dist build qnap ``` Updates tailscale/tailscale-qpkg#135 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	7 months ago
Irbe Krumina	bbe194c80d	cmd/k8s-operator: correctly determine cluster domain (#11512 ) Kubernetes cluster domain defaults to 'cluster.local', but can also be customized. We need to determine cluster domain to set up in-cluster forwarding to our egress proxies. This was previously hardcoded to 'cluster.local', so was the egress proxies were not usable in clusters with custom domains. This PR ensures that we attempt to determine the cluster domain by parsing /etc/resolv.conf. In case the cluster domain cannot be determined from /etc/resolv.conf, we fall back to 'cluster.local'. Updates tailscale/tailscale#10399,tailscale/tailscale#11445 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Aaron Klotz	7132b782d4	hostinfo: use Distro field for distinguishing Windows Server builds Some editions of Windows server share the same build number as their client counterpart; we must use an additional field found in the OS version information to distinguish between them. Even though "Distro" has Linux connotations, it is the most appropriate hostinfo field. What is Windows Server if not an alternate distribution of Windows? This PR populates Distro with "Server" when applicable. Fixes #11785 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	8 months ago
Percy Wegmann	02c6af2a69	cmd/tailscale: clarify Taildrive grants in help text Fixes #cleanup Signed-off-by: Percy Wegmann <percy@tailscale.com>	8 months ago
Paul Scott	82394debb7	cmd/tailscale: add shell tab-completion The approach is lifted from cobra: `tailscale completion bash` emits a bash script for configuring the shell's autocomplete: . <( tailscale completion bash ) so that typing: tailscale st<TAB> invokes: tailscale completion __complete -- st RELNOTE=tailscale CLI now supports shell tab-completion Fixes #3793 Signed-off-by: Paul Scott <paul@tailscale.com>	8 months ago
dependabot[bot]	449be38e03	build(deps): bump google.golang.org/protobuf from 1.32.0 to 1.33.0 (#11410 ) * build(deps): bump google.golang.org/protobuf from 1.32.0 to 1.33.0 Bumps google.golang.org/protobuf from 1.32.0 to 1.33.0. --- updated-dependencies: - dependency-name: google.golang.org/protobuf dependency-type: indirect ... Signed-off-by: dependabot[bot] <support@github.com> * cmd/{derper,stund}: update depaware.txt Signed-off-by: Andrew Lytvynov <awly@tailscale.com> --------- Signed-off-by: dependabot[bot] <support@github.com> Signed-off-by: Andrew Lytvynov <awly@tailscale.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Andrew Lytvynov <awly@tailscale.com>	8 months ago
Paul Scott	454a03a766	cmd/tailscale/cli: prepend "tailscale" to usage errors Updates #11626 Signed-off-by: Paul Scott <paul@tailscale.com>	8 months ago
Paul Scott	d07ede461a	cmd/tailscale/cli: fix "subcommand required" errors when typod Fixes #11672 Signed-off-by: Paul Scott <paul@tailscale.com>	8 months ago
Paul Scott	3ff3445e9d	cmd/tailscale/cli: improve ShortHelp/ShortUsage unit test, fix new errors Updates #11364 Signed-off-by: Paul Scott <paul@tailscale.com>	8 months ago
Paul Scott	eb34b8a173	cmd/tailscale/cli: remove explicit usageFunc - its default Updates #cleanup Signed-off-by: Paul Scott <paul@tailscale.com>	8 months ago
Paul Scott	a50e4e604e	cmd/tailscale/cli: remove duplicate "tailscale " in drive subcmd usage Updates #cleanup Signed-off-by: Paul Scott <paul@tailscale.com>	8 months ago
Paul Scott	62d4be873d	cmd/tailscale/cli: fix drive --help usage identation Updates #cleanup Signed-off-by: Paul Scott <paul@tailscale.com>	8 months ago
Brad Fitzpatrick	7c1d6e35a5	all: use Go 1.22 range-over-int Updates #11058 Change-Id: I35e7ef9b90e83cac04ca93fd964ad00ed5b48430 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Brad Fitzpatrick	0fba9e7570	cmd/tailscale/cli: prevent concurrent Start calls in 'up' Seems to deflake tstest/integration tests. I can't reproduce it anymore on one of my VMs that was consistently flaking after a dozen runs before. Now I can run hundreds of times. Updates #11649 Fixes #7036 Change-Id: I2f7d4ae97500d507bdd78af9e92cd1242e8e44b8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Irbe Krumina	26f9bbc02b	cmd/k8s-operator,k8s-operator: document tailscale.com Custom Resource Definitions better. (#11665 ) Updates tailscale/tailscale#10880 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Brad Fitzpatrick	7ec0dc3834	ipn/ipnlocal: make StartLoginInteractive take (yet unused) context In prep for future fix to undermentioned issue. Updates tailscale/tailscale#7036 Change-Id: Ide114db917dcba43719482ffded6a9a54630d99e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Claire Wang	9171b217ba	cmd/tailscale, ipn/ipnlocal: add suggest exit node CLI option (#11407 ) Updates tailscale/corp#17516 Signed-off-by: Claire Wang <claire@tailscale.com>	8 months ago
Irbe Krumina	38fb23f120	cmd/k8s-operator,k8s-operator: allow users to configure proxy env vars via ProxyClass (#11743 ) Adds new ProxyClass.spec.statefulSet.pod.{tailscaleContainer,tailscaleInitContainer}.Env field that allow users to provide key, value pairs that will be set as env vars for the respective containers. Allow overriding all containerboot env vars, but warn that this is not supported and might break (in docs + a warning when validating ProxyClass). Updates tailscale/tailscale#10709 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Brad Fitzpatrick	a1abd12f35	cmd/tailscaled, net/tstun: build for aix/ppc64 At least in userspace-networking mode. Fixes #11361 Change-Id: I78d33f0f7e05fe9e9ee95b97c99b593f8fe498f2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Joe Tsai	7a77a2edf1	logtail: optimize JSON processing (#11671 ) Changes made: * Avoid "encoding/json" for JSON processing, and instead use "github.com/go-json-experiment/json/jsontext". Use jsontext.Value.IsValid for validation, which is much faster. Use jsontext.AppendQuote instead of our own JSON escaping. * In drainPending, use a different maxLen depending on lowMem. In lowMem mode, it is better to perform multiple uploads than it is to construct a large body that OOMs the process. * In drainPending, if an error is encountered draining, construct an error message in the logtail JSON format rather than something that is invalid JSON. * In appendTextOrJSONLocked, use jsontext.Decoder to check whether the input is a valid JSON object. This is faster than the previous approach of unmarshaling into map[string]any and then re-marshaling that data structure. This is especially beneficial for network flow logging, which produces relatively large JSON objects. * In appendTextOrJSONLocked, enforce maxSize on the input. If too large, then we may end up in a situation where the logs can never be uploaded because it exceeds the maximum body size that the Tailscale logs service accepts. * Use "tailscale.com/util/truncate" to properly truncate a string on valid UTF-8 boundaries. * In general, remove unnecessary spaces in JSON output. Performance: name old time/op new time/op delta WriteText 776ns ± 2% 596ns ± 1% -23.24% (p=0.000 n=10+10) WriteJSON 110µs ± 0% 9µs ± 0% -91.77% (p=0.000 n=8+8) name old alloc/op new alloc/op delta WriteText 448B ± 0% 0B -100.00% (p=0.000 n=10+10) WriteJSON 37.9kB ± 0% 0.0kB ± 0% -99.87% (p=0.000 n=10+10) name old allocs/op new allocs/op delta WriteText 1.00 ± 0% 0.00 -100.00% (p=0.000 n=10+10) WriteJSON 1.08k ± 0% 0.00k ± 0% -99.91% (p=0.000 n=10+10) For text payloads, this is 1.30x faster. For JSON payloads, this is 12.2x faster. Updates #cleanup Updates tailscale/corp#18514 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	8 months ago
James Tucker	8fa3026614	tsweb: switch to fastuuid for request ID generation Request ID generation appears prominently in some services cumulative allocation rate, and while this does not eradicate this issue (the API still makes UUID objects), it does improve the overhead of this API and reduce the amount of garbage that it produces. Updates tailscale/corp#18266 Updates tailscale/corp#19054 Signed-off-by: James Tucker <james@tailscale.com>	8 months ago
James Tucker	db760d0bac	cmd/tailscaled: move cleanup to an implicit action during startup This removes a potentially increased boot delay for certain boot topologies where they block on ExecStartPre that may have socket activation dependencies on other system services (such as systemd-resolved and NetworkManager). Also rename cleanup to clean up in affected/immediately nearby places per code review commentary. Fixes #11599 Signed-off-by: James Tucker <james@tailscale.com>	8 months ago
Paul Scott	da4e92bf01	cmd/tailscale/cli: prefix all --help usages with "tailscale ...", some tidying Also capitalises the start of all ShortHelp, allows subcommands to be hidden with a "HIDDEN: " prefix in their ShortHelp, and adds a TS_DUMP_HELP envknob to look at all --help messages together. Fixes #11664 Signed-off-by: Paul Scott <paul@tailscale.com>	8 months ago
Percy Wegmann	9da135dd64	cmd/tailscale/cli: moved share.go to drive.go Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	8 months ago
Percy Wegmann	1e0ebc6c6d	cmd/tailscale/cli: rename share command to drive Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	8 months ago
Irbe Krumina	231e44e742	Revert "cmd/{k8s-nameserver,k8s-operator},k8s-operator: add a kube nameserver, make operator deploy it (#11017 )" (#11669 ) Temporarily reverting this PR to avoid releasing half finished featue. This reverts commit `9e2f58f846`. Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Brad Fitzpatrick	e6983baa73	cmd/tailscale/cli: fix macOS crash reading envknob in init (#11667 ) And add a test. Regression from `a5e1f7d703` Fixes tailscale/corp#19036 Change-Id: If90984049af0a4820c96e1f77ddf2fce8cb3043f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Chloé Vulquin	0f3a292ebd	cli/configure: respect $KUBECONFIG (#11604 ) cmd/tailscale/cli: respect $KUBECONFIG * `$KUBECONFIG` is a `$PATH`-like: it defines a list. `tailscale config kubeconfig` works like the rest of the ecosystem so that if $KUBECONFIG is set it will write to the first existant file in the list, if none exist then the final entry in the list. * if `$KUBECONFIG` is an empty string, the old logic takes over. Notes: * The logic for file detection is inlined based on what `kind` does. Technically it's a race condition, since the file could be removed/added in between the processing steps, but the fallout shouldn't be too bad. https://github.com/kubernetes-sigs/kind/blob/v0.23.0-alpha/pkg/cluster/internal/kubeconfig/internal/kubeconfig/paths.go * The sandboxed (App Store) variant relies on a specific temporary entitlement to access the ~/.kube/config file. The entitlement is only granted to specific files, and so is not applicable to paths supplied by the user at runtime. While there may be other ways to achieve this access to arbitrary kubeconfig files, it's out of scope for now. Updates #11645 Signed-off-by: Chloé Vulquin <code@toast.bunkerlabs.net>	8 months ago
Brad Fitzpatrick	c71e8db058	cmd/tailscale/cli: stop spamming os.Stdout/os.Stderr in tests After: bradfitz@book1pro tailscale.com % ./tool/go test -c ./cmd/tailscale/cli bradfitz@book1pro tailscale.com % ./cli.test bradfitz@book1pro tailscale.com % Before: bradfitz@book1pro tailscale.com % ./tool/go test -c ./cmd/tailscale/cli bradfitz@book1pro tailscale.com % ./cli.test Warning: funnel=on for foo.test.ts.net:443, but no serve config run: `tailscale serve --help` to see how to configure handlers Warning: funnel=on for foo.test.ts.net:443, but no serve config run: `tailscale serve --help` to see how to configure handlers USAGE funnel <serve-port> {on\|off} funnel status [--json] Funnel allows you to publish a 'tailscale serve' server publicly, open to the entire internet. Turning off Funnel only turns off serving to the internet. It does not affect serving to your tailnet. SUBCOMMANDS status show current serve/funnel status error: path must be absolute error: invalid TCP source "localhost:5432": missing port in address error: invalid TCP source "tcp://somehost:5432" must be one of: localhost or 127.0.0.1 tcp://somehost:5432error: invalid TCP source "tcp://somehost:0" must be one of: localhost or 127.0.0.1 tcp://somehost:0error: invalid TCP source "tcp://somehost:65536" must be one of: localhost or 127.0.0.1 tcp://somehost:65536error: path must be absolute error: cannot serve web; already serving TCP You don't have permission to enable this feature. This also moves the color handling up to a generic spot so it's not just one subcommand doing it itself. See https://github.com/tailscale/tailscale/issues/11626#issuecomment-2041795129 Fixes #11643 Updates #11626 Change-Id: I3a49e659dcbce491f4a2cb784be20bab53f72303 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Brad Fitzpatrick	b0fbd85592	net/tsdial: partially fix "tailscale nc" (UserDial) on macOS At least in the case of dialing a Tailscale IP. Updates #4529 Change-Id: I9fd667d088a14aec4a56e23aabc2b1ffddafa3fe Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Brad Fitzpatrick	a5e1f7d703	ipn/{ipnlocal,localapi}: add API to toggle use of exit node This is primarily for GUIs, so they don't need to remember the most recently used exit node themselves. This adds some CLI commands, but they're disabled and behind the WIP envknob, as we need to consider naming (on/off is ambiguous with running an exit node, etc) as well as automatic exit node selection in the future. For now the CLI commands are effectively developer debug things to test the LocalAPI. Updates tailscale/corp#18724 Change-Id: I9a32b00e3ffbf5b29bfdcad996a4296b5e37be7e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Maisem Ali	3f4c5daa15	wgengine/netstack: remove SubnetRouterWrapper It was used when we only supported subnet routers on linux and would nil out the SubnetRoutes slice as no other router worked with it, but now we support subnet routers on ~all platforms. The field it was setting to nil is now only used for network logging and nowhere else, so keep the field but drop the SubnetRouterWrapper as it's not useful. Updates #cleanup Change-Id: Id03f9b6ec33e47ad643e7b66e07911945f25db79 Signed-off-by: Maisem Ali <maisem@tailscale.com>	8 months ago
Brad Fitzpatrick	ac2522092d	cmd/tailscale/cli: make exit-node list not random The output was changing randomly per run, due to range over a map. Then some misc style tweaks I noticed while debugging. Fixes #11629 Change-Id: I67aef0e68566994e5744d4828002f6eb70810ee1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Will Morrison	306bacc669	cmd/tailscale/cli: Add CLI command to update certs on Synology devices. Fixes #4674 Signed-off-by: Will Morrison <william.barr.morrison@gmail.com>	8 months ago
Charlotte Brandhorst-Satzkorn	98cf71cd73	tailscale: switch tailfs to drive syntax for api and logs (#11625 ) This change switches the api to /drive, rather than the previous /tailfs as well as updates the log lines to reflect the new value. It also cleans up some existing tailfs references. Updates tailscale/corp#16827 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	8 months ago
Charlotte Brandhorst-Satzkorn	93618a3518	tailscale: update tailfs functions and vars to use drive naming (#11597 ) This change updates all tailfs functions and the majority of the tailfs variables to use the new drive naming. Updates tailscale/corp#16827 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	8 months ago
Charlotte Brandhorst-Satzkorn	14683371ee	tailscale: update tailfs file and package names (#11590 ) This change updates the tailfs file and package names to their new naming convention. Updates #tailscale/corp#16827 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	8 months ago
Brad Fitzpatrick	1c259100b0	cmd/{derper,derpprobe}: add --version flag Fixes #11582 Change-Id: If99fc1ab6b89d624fbb07bd104dd882d2c7b50b4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Brad Fitzpatrick	ec87e219ae	logtail: delete unused code from old way to configure zstd Updates #cleanup Change-Id: I666ecf08ea67e461adf2a3f4daa9d1753b2dc1e4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Irbe Krumina	9b5176c4d9	cmd/k8s-operator: fix failing tests (#11541 ) Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Irbe Krumina	9e2f58f846	cmd/{k8s-nameserver,k8s-operator},k8s-operator: add a kube nameserver, make operator deploy it (#11017 ) * cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster. Adds a simple nameserver that can respond to A record queries for ts.net DNS names. It can respond to queries from in-memory records, populated from a ConfigMap mounted at /config. It dynamically updates its records as the ConfigMap contents changes. It will respond with NXDOMAIN to queries for any other record types (AAAA to be implemented in the future). It can respond to queries over UDP or TCP. It runs a miekg/dns DNS server with a single registered handler for ts.net domain names. Queries for other domain names will be refused. The intended use of this is: 1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet services exposed via Tailscale operator egress over HTTPS 2) to allow non-tailnet cluster workloads to talk to workloads in the same cluster that have been exposed to tailnet over their MagicDNS names but on their cluster IPs. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com> * cmd/k8s-operator/deploy/crds,k8s-operator: add DNSConfig CustomResource Definition DNSConfig CRD can be used to configure the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster. Signed-off-by: Irbe Krumina <irbe@tailscale.com> * cmd/k8s-operator,k8s-operator: optionally reconcile nameserver resources Adds a new reconciler that reconciles DNSConfig resources. If a DNSConfig is deployed to cluster, the reconciler creates kube nameserver resources. This reconciler is only responsible for creating nameserver resources and not for populating nameserver's records. Signed-off-by: Irbe Krumina <irbe@tailscale.com> * cmd/{k8s-operator,k8s-nameserver}: generate DNSConfig CRD for charts, append to static manifests Signed-off-by: Irbe Krumina <irbe@tailscale.com> --------- Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Andrea Gottardo	008676f76e	cmd/serve: update warning for sandboxed macOS builds (#11530 )	8 months ago
Percy Wegmann	66e4d843c1	ipn/localapi: add support for multipart POST to file-put This allows sending multiple files via Taildrop in one request. Progress is tracked via ipn.Notify. Updates tailscale/corp#18202 Signed-off-by: Percy Wegmann <percy@tailscale.com>	8 months ago
Andrew Lytvynov	5d41259a63	cmd/tailscale/cli: remove Beta tag from tailscale update (#11529 ) Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	8 months ago
Irbe Krumina	4cbef20569	cmd/k8s-operator: redact auth key from debug logs (#11523 ) Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Chris Milson-Tokunaga	b6dfd7443a	Change type of installCRDs (#11478 ) Including the double quotes (`"`) around the value made it appear like the helm chart should expect a string value for `installCRDs`. Signed-off-by: Chris Milson-Tokunaga <chris.w.milson@gmail.com>	8 months ago
Percy Wegmann	8b8b315258	net/tstun: use gaissmai/bart instead of tempfork/device This implementation uses less memory than tempfork/device, which helps avoid OOM conditions in the iOS VPN extension when switching to a Tailnet with ExitNode routing enabled. Updates tailscale/corp#18514 Signed-off-by: Percy Wegmann <percy@tailscale.com>	8 months ago
Brad Fitzpatrick	7b34154df2	all: deprecate Node.Capabilities (more), remove PeerChange.Capabilities [capver 89] First we had Capabilities []string. Then https://tailscale.com/blog/acl-grants (#4217) brought CapMap, a superset of Capabilities. Except we never really finished the transition inside the codebase to go all-in on CapMap. This does so. Notably, this coverts Capabilities on the wire early to CapMap internally so the code can only deal in CapMap, even against an old control server. In the process, this removes PeerChange.Capabilities support, which no known control plane sent anyway. They can and should use PeerChange.CapMap instead. Updates #11508 Updates #4217 Change-Id: I872074e226b873f9a578d9603897b831d50b25d9 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Joe Tsai	85febda86d	all: use zstdframe where sensible (#11491 ) Use the zstdframe package where sensible instead of plumbing around our own zstd.Encoder just for stateless operations. This causes logtail to have a dependency on zstd, but that's arguably okay since zstd support is implicit to the protocol between a client and the logging service. Also, virtually every caller to logger.NewLogger was manually setting up a zstd.Encoder anyways, meaning that zstd was functionally always a dependency. Updates #cleanup Updates tailscale/corp#18514 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	9 months ago
Irbe Krumina	b0c3e6f6c5	cmd/k8s-operator,ipn/conf.go: fix --accept-routes for proxies (#11453 ) Fix a bug where all proxies got configured with --accept-routes set to true. The bug was introduced in https://github.com/tailscale/tailscale/pull/11238. Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Mario Minardi	d2ccfa4edd	cmd/tailscale,ipn/ipnlocal: enable web client over quad 100 by default (#11419 ) Enable the web client over 100.100.100.100 by default. Accepting traffic from [tailnet IP]:5252 still requires setting the `webclient` user pref. Updates https://github.com/tailscale/tailscale/issues/10261 Signed-off-by: Mario Minardi <mario@tailscale.com>	9 months ago
Andrea Gottardo	08ebac9acb	version,cli,safesocket: detect non-sandboxed macOS GUI (#11369 ) Updates ENG-2848 We can safely disable the App Sandbox for our macsys GUI, allowing us to use `tailscale ssh` and do a few other things that we've wanted to do for a while. This PR: - allows Tailscale SSH to be used from the macsys GUI binary when called from a CLI - tweaks the detection of client variants in prop.go, with new functions `IsMacSys()`, `IsMacSysApp()` and `IsMacAppSandboxEnabled()` Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	9 months ago
Irbe Krumina	ea55f96310	cmd/tailscale/cli: fix configuring partially empty kubeconfig (#11417 ) When a user deletes the last cluster/user/context from their kubeconfig via 'kubectl delete-[cluster\|user\|context] command, kubectx sets the relevant field in kubeconfig to 'null'. This was breaking our conversion logic that was assuming that the field is either non-existant or is an array. Updates tailscale/corp#18320 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Anton Tolchanov	f12d2557f9	prober: add a DERP bandwidth probe Updates tailscale/corp#17912 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	9 months ago
Percy Wegmann	e496451928	ipn,cmd/tailscale,client/tailscale: add support for renaming TailFS shares - Updates API to support renaming TailFS shares. - Adds a CLI rename subcommand for renaming a share. - Renames the CLI subcommand 'add' to 'set' to make it clear that this is an add or update. - Adds a unit test for TailFS in ipnlocal Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Percy Wegmann	6c160e6321	ipn,tailfs: tie TailFS share configuration to user profile Previously, the configuration of which folders to share persisted across profile changes. Now, it is tied to the user's profile. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Percy Wegmann	16ae0f65c0	cmd/viewer: import views when generating byteSliceField Updates #cleanup Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Andrew Dunham	34176432d6	cmd/derper, types/logger: move log filter to shared package So we can use it in trunkd to quiet down the logs there. Updates #5563 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ie3177dc33f5ad103db832aab5a3e0e4f128f973f	9 months ago
Sonia Appasamy	c58c59ee54	{ipn,cmd/tailscale/cli}: move ServeConfig mutation logic to ipn/serve Moving logic that manipulates a ServeConfig into recievers on the ServeConfig in the ipn package. This is setup work to allow the web client and cli to both utilize these shared functions to edit the serve config. Any logic specific to flag parsing or validation is left untouched in the cli command. The web client will similarly manage its validation of user's requested changes. If validation logic becomes similar-enough, we can make a serve util for shared functionality, which likely does not make sense in ipn. Updates #10261 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	9 months ago
Sonia Appasamy	65c3c690cf	{ipn/serve,cmd/tailscale/cli}: move some shared funcs to ipn In preparation for changes to allow configuration of serve/funnel from the web client, this commit moves some functionality that will be shared between the CLI and web client to the ipn package's serve.go file, where some other util funcs are already defined. Updates #10261 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	9 months ago
Percy Wegmann	e324a5660f	ipn: include full tailfs shares in ipn notifications This allows the Mac application to regain access to restricted folders after restarts. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Brad Fitzpatrick	69f4b4595a	wgengine{,/wgint}: add wgint.Peer wrapper type, add to wgengine.Engine This adds a method to wgengine.Engine and plumbed down into magicsock to add a way to get a type-safe Tailscale-safe wrapper around a wireguard-go device.Peer that only exposes methods that are safe for Tailscale to use internally. It also removes HandshakeAttempts from PeerStatusLite that was just added as it wasn't needed yet and is now accessible ala cart as needed from the Peer type accessor. None of this is used yet. Updates #7617 Change-Id: I07be0c4e6679883e6eeddf8dbed7394c9e79c5f4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Irbe Krumina	95dcc1745b	cmd/k8s-operator: reconcile tailscale Ingresses when their backend Services change. (#11255 ) This is so that if a backend Service gets created after the Ingress, it gets picked up by the operator. Updates tailscale/tailscale#11251 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Anton Tolchanov <1687799+knyar@users.noreply.github.com>	9 months ago
Irbe Krumina	303125d96d	cmd/k8s-operator: configure all proxies with declarative config (#11238 ) Containerboot container created for operator's ingress and egress proxies are now always configured by passing a configfile to tailscaled (tailscaled --config <configfile-path>. It does not run 'tailscale set' or 'tailscale up'. Upgrading existing setups to this version as well as downgrading existing setups at this version works. Updates tailscale/tailscale#10869 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Irbe Krumina	45d27fafd6	cmd/k8s-operator,k8s-operator,go.{mod,sum},tstest/tools: add Tailscale Kubernetes operator API docs (#11246 ) Add logic to autogenerate CRD docs. .github/workflows/kubemanifests.yaml CI workflow will fail if the doc is out of date with regard to the current CRDs. Docs can be refreshed by running make kube-generate-all. Updates tailscale/tailscale#11023 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Anton Tolchanov	8cc5c51888	health: warn about reverse path filtering and exit nodes When reverse path filtering is in strict mode on Linux, using an exit node blocks all network connectivity. This change adds a warning about this to `tailscale status` and the logs. Example in `tailscale status`: ``` - not connected to home DERP region 22 - The following issues on your machine will likely make usage of exit nodes impossible: [interface "eth0" has strict reverse-path filtering enabled], please set rp_filter=2 instead of rp_filter=1; see https://github.com/tailscale/tailscale/issues/3310 ``` Example in the logs: ``` 2024/02/21 21:17:07 health("overall"): error: multiple errors: not in map poll The following issues on your machine will likely make usage of exit nodes impossible: [interface "eth0" has strict reverse-path filtering enabled], please set rp_filter=2 instead of rp_filter=1; see https://github.com/tailscale/tailscale/issues/3310 ``` Updates #3310 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	9 months ago
Nick Khyl	7ef1fb113d	cmd/tailscaled, ipn/ipnlocal, wgengine: shutdown tailscaled if wgdevice is closed Tailscaled becomes inoperative if the Tailscale Tunnel wintun adapter is abruptly removed. wireguard-go closes the device in case of a read error, but tailscaled keeps running. This adds detection of a closed WireGuard device, triggering a graceful shutdown of tailscaled. It is then restarted by the tailscaled watchdog service process. Fixes #11222 Signed-off-by: Nick Khyl <nickk@tailscale.com>	9 months ago
Percy Wegmann	50fb8b9123	tailfs: replace webdavfs with reverse proxies Instead of modeling remote WebDAV servers as actual webdav.FS instances, we now just proxy traffic to them. This not only simplifies the code, but it also allows WebDAV locking to work correctly by making sure locks are handled by the servers that need to (i.e. the ones actually serving the files). Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Brad Fitzpatrick	e1bd7488d0	all: remove LenIter, use Go 1.22 range-over-int instead Updates #11058 Updates golang/go#65685 Change-Id: Ibb216b346e511d486271ab3d84e4546c521e4e22 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
James Tucker	0c5e65eb3f	cmd/derper: apply TCP keepalive and timeout to TLS as well I missed a case in the earlier patch, and so we're still sending 15s TCP keepalive for TLS connections, now adjusted there too. Updates tailscale/corp#17587 Updates #3363 Signed-off-by: James Tucker <james@tailscale.com>	9 months ago
Andrea Gottardo	c8c999d7a9	cli/debug: rename DERP debug mode (#11220 ) Renames a debug flag in the CLI. Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	9 months ago
Percy Wegmann	15b2c674bf	cmd/tailscale: add node attribute instructions to share command help This adds details on how to configure node attributes to allow sharing and accessing shares. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
James Tucker	edbad6d274	cmd/derper: add user timeout and reduce TCP keepalive The derper sends an in-protocol keepalive every 60-65s, so frequent TCP keepalives are unnecessary. In this tuning TCP keepalives should never occur for a DERP client connection, as they will send an L7 keepalive often enough to always reset the TCP keepalive timer. If however a connection does not receive an ACK promptly it will now be shutdown, which happens sooner than it would with a normal TCP keepalive tuning. This re-tuning reduces the frequency of network traffic from derp to client, reducing battery cost. Updates tailscale/corp#17587 Updates #3363 Signed-off-by: James Tucker <james@tailscale.com>	9 months ago
Brad Fitzpatrick	10d130b845	cmd/derper, derp, tailcfg: add admission controller URL option So derpers can check an external URL for whether to permit access to a certain public key. Updates tailscale/corp#17693 Change-Id: I8594de58f54a08be3e2dbef8bcd1ff9b728ab297 Co-authored-by: Maisem Ali <maisem@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Paul Scott	7708ab68c0	cmd/tailscale/cli: pass "-o 'CanonicalizeHostname no'" to ssh Fixes #10348 Signed-off-by: Paul Scott <paul@tailscale.com>	9 months ago
Percy Wegmann	91a1019ee2	cmd/testwrapper: apply results of all unit tests to coverage for all packages This allows coverage from tests that hit multiple packages at once to be reflected in all those packages' coverage. Updates #cleanup Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Will Norris	6b582cb8b6	cmd/tailscale: support clickable IPv6 web client addresses Instead of constructing the `ip:port` string ourselves, use netip.AddrPortFrom which handles IPv6 correctly. Updates #11164 Signed-off-by: Will Norris <will@tailscale.com>	10 months ago
Will Norris	24487815e1	cmd/tailscale: make web client URL clickable Updates #11151 Signed-off-by: Will Norris <will@tailscale.com>	10 months ago
Andrew Dunham	52f16b5d10	doctor/ethtool, ipn/ipnlocal: add ethtool bugreport check Updates #11137 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Idbe862d80e428adb044249c47d9096b87f29d5d8	10 months ago
Brad Fitzpatrick	61a1644c2a	go.mod, all: move away from inet.af domain seized by Taliban Updates inetaf/tcpproxy#39 Change-Id: I7fee276b116bd08397347c6c949011d76a2842cf Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	10 months ago
Irbe Krumina	5bd19fd3e3	cmd/k8s-operator,k8s-operator: proxy configuration mechanism via a new ProxyClass custom resource (#11074 ) * cmd/k8s-operator,k8s-operator: introduce proxy configuration mechanism via ProxyClass custom resource. ProxyClass custom resource can be used to specify customizations for the proxy resources created by the operator. Add a reconciler that validates ProxyClass resources and sets a Ready condition to True or False with a corresponding reason and message. This is required because some fields (labels and annotations) require complex validations that cannot be performed at custom resource apply time. Reconcilers that use the ProxyClass to configure proxy resources are expected to verify that the ProxyClass is Ready and not proceed with resource creation if configuration from a ProxyClass that is not yet Ready is required. If a tailscale ingress/egress Service is annotated with a tailscale.com/proxy-class annotation, look up the corresponding ProxyClass and, if it is Ready, apply the configuration from the ProxyClass to the proxy's StatefulSet. If a tailscale Ingress has a tailscale.com/proxy-class annotation and the referenced ProxyClass custom resource is available and Ready, apply configuration from the ProxyClass to the proxy resources that will be created for the Ingress. Add a new .proxyClass field to the Connector spec. If connector.spec.proxyClass is set to a ProxyClass that is available and Ready, apply configuration from the ProxyClass to the proxy resources created for the Connector. Ensure that when Helm chart is packaged, the ProxyClass yaml is added to chart templates. Ensure that static manifest generator adds ProxyClass yaml to operator.yaml. Regenerate operator.yaml Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Percy Wegmann	d0ef3a25df	cmd/tailscale: hide share subcommand Fixes #1115 Signed-off-by: Percy Wegmann <percy@tailscale.com>	10 months ago
Percy Wegmann	55b372a79f	tailscaled: revert to using pointers for subcommands As part of #10631, we stopped using function pointers for subcommands, preventing us from registering platform-specific installSystemDaemon and uninstallSystemDaemon subcommands. Fixes #11099 Signed-off-by: Percy Wegmann <percy@tailscale.com>	10 months ago
Percy Wegmann	87154a2f88	tailfs: fix startup issues on windows Starts TailFS for Windows too, initializes shares on startup. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	10 months ago
Percy Wegmann	abab0d4197	tailfs: clean up naming and package structure - Restyles tailfs -> tailFS - Defines interfaces for main TailFS types - Moves implemenatation of TailFS into tailfsimpl package Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	10 months ago
James Tucker	24bac27632	util/rands: add Shuffle and Perm functions with on-stack RNG state The new math/rand/v2 package includes an m-local global random number generator that can not be reseeded by the user, which is suitable for most uses without the RNG pools we have in a number of areas of the code base. The new API still does not have an allocation-free way of performing a seeded operations, due to the long term compiler bug around interface parameter escapes, and the Source interface. This change introduces the two APIs that math/rand/v2 can not yet replace efficiently: seeded Perm() and Shuffle() operations. This implementation chooses to use the PCG random source from math/rand/v2, as with sufficient compiler optimization, this source should boil down to only two on-stack registers for random state under ideal conditions. Updates #17243 Signed-off-by: James Tucker <james@tailscale.com>	10 months ago
Jenny Zhang	c446451bfa	cmd/gitops-pusher: only use OAuth creds if non-empty string `os.LookupEnv` may return true if the variable is present in the environment but an empty string. We should only attempt to set OAuth Config if thsoe values are non-empty. Updates gitops-acl-action#33 Signed-off-by: Jenny Zhang <jz@tailscale.com>	10 months ago
Percy Wegmann	993acf4475	tailfs: initial implementation Add a WebDAV-based folder sharing mechanism that is exposed to local clients at 100.100.100.100:8080 and to remote peers via a new peerapi endpoint at /v0/tailfs. Add the ability to manage folder sharing via the new 'share' CLI sub-command. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	10 months ago
Joe Tsai	94a4f701c2	all: use reflect.TypeFor now available in Go 1.22 (#11078 ) Updates #cleanup Signed-off-by: Joe Tsai <joetsai@digital-static.net>	10 months ago
Charlotte Brandhorst-Satzkorn	0f042b9814	cmd/tailscale/cli: fix exit node status output (#11076 ) This change fixes the format of tailscale status output when location based exit nodes are present. Fixes #11065 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	10 months ago
Sonia Appasamy	1217f655c0	cmd/dist: update logs for synology builds Update logs for synology builds to more clearly callout which variant is being built. The two existing variants are: 1. Sideloaded (can be manual installed on a device by anyone) 2. Package center distribution (by the tailscale team) Updates #cleanup Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	10 months ago
Will Norris	128c99d4ae	client/web: add new readonly mode The new read-only mode is only accessible when running `tailscale web` by passing a new `-readonly` flag. This new mode is identical to the existing login mode with two exceptions: - the management client in tailscaled is not started (though if it is already running, it is left alone) - the client does not prompt the user to login or switch to the management client. Instead, a message is shown instructing the user to use other means to manage the device. Updates #10979 Signed-off-by: Will Norris <will@tailscale.com>	10 months ago
Irbe Krumina	a6cc2fdc3e	cmd/{containerboot,k8s-operator/deploy/manifests}: optionally allow proxying cluster traffic to a cluster target via ingress proxy (#11036 ) * cmd/containerboot,cmd/k8s-operator/deploy/manifests: optionally forward cluster traffic via ingress proxy. If a tailscale Ingress has tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation, configure the associated ingress proxy to have its tailscale serve proxy to listen on Pod's IP address. This ensures that cluster traffic too can be forwarded via this proxy to the ingress backend(s). In containerboot, if EXPERIMENTAL_PROXY_CLUSTER_TRAFFIC_VIA_INGRESS is set to true and the node is Kubernetes operator ingress proxy configured via Ingress, make sure that traffic from within the cluster can be proxied to the ingress target. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Brad Fitzpatrick	2bd3c1474b	util/cmpx: delete now that we're using Go 1.22 Updates #11058 Change-Id: I09dea8e86f03ec148b715efca339eab8b1f0f644 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	10 months ago
Andrew Lytvynov	db3776d5bf	go.toolchain.rev: bump to Go 1.22.0 (#11055 ) Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	10 months ago
Chris Palmer	a633a30711	cmd/hello: link to the Hello KB article (#11022 ) Fixes https://github.com/tailscale/corp/issues/17104 Signed-off-by: Chris Palmer <cpalmer@tailscale.com>	10 months ago
Chris Palmer	9744ad47e3	cmd/hello: avoid deprecated apis (#10957 ) Updates #cleanup Signed-off-by: Chris Palmer <cpalmer@tailscale.com>	10 months ago
Will Norris	13f8a669d5	cmd/gitops-pusher: fix logic for checking credentials gitops-pusher supports authenticating with an API key or OAuth credentials (added in #7393). You shouldn't ever use both of those together, so we error if both are set. In tailscale/gitops-acl-action#24, OAuth support is being added to the GitHub action. In that environment, both the TS_API_KEY and OAuth variables will be set, even if they are empty values. This causes an error in gitops-pusher which expects only one to be set. Update gitops-pusher to check that only one set of environment variables are non-empty, rather than just checking if they are set. Updates #7393 Signed-off-by: Will Norris <will@tailscale.com>	10 months ago
Andrew Lytvynov	fbfc3b7e51	cmd/tailscale/cli: run Watch with NotifyNoPrivateKeys (#10950 ) When running as non-root non-operator user, you get this error: ``` $ tailscale serve 8080 Access denied: watch IPN bus access denied, must set ipn.NotifyNoPrivateKeys when not running as admin/root or operator Use 'sudo tailscale serve 8080' or 'tailscale up --operator=$USER' to not require root. ``` It should fail, but the error message is confusing. With this fix: ``` $ tailscale serve 8080 sending serve config: Access denied: serve config denied Use 'sudo tailscale serve 8080' or 'tailscale up --operator=$USER' to not require root. ``` Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	10 months ago
Irbe Krumina	370ec6b46b	cmd/k8s-operator: don't proceed with Ingress that has no valid backends (#10919 ) Do not provision resources for a tailscale Ingress that has no valid backends. Updates tailscale/tailscale#10910 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
James Tucker	7e3bcd297e	go.mod,wgengine/netstack: bump gvisor Updates #8043 Signed-off-by: James Tucker <james@tailscale.com>	11 months ago
James Tucker	457102d070	go.mod: bump most deps for start of cycle Plan9 CI is disabled. 3p dependencies do not build for the target. Contributor enthusiasm appears to have ceased again, and no usage has been made. Skipped gvisor, nfpm, and k8s. Updates #5794 Updates #8043 Signed-off-by: James Tucker <james@tailscale.com>	11 months ago
Andrew Dunham	7a0392a8a3	wgengine/netstack: expose gVisor metrics through expvar When tailscaled is run with "-debug 127.0.0.1:12345", these metrics are available at: http://localhost:12345/debug/metrics Updates #8210 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I19db6c445ac1f8344df2bc1066a3d9c9030606f8	11 months ago
ChandonPierre	2ce596ea7a	cmd/k8s-operator/deploy: allow modifying operator tags via Helm values Updates tailscale/tailscale#10659 Signed-off-by: Chandon Pierre <cpierre@coreweave.com>	11 months ago
James Tucker	8250582fe6	ipn/ipnlocal: make app connector configuration concurrent If there are routes changes as a side effect of an app connector configuration update, the connector configuration may want to reenter a lock, so must be started asynchronously. Updates tailscale/corp#16833 Signed-off-by: James Tucker <james@tailscale.com>	11 months ago
James Tucker	38a1cf748a	control/controlclient,util/execqueue: extract execqueue into a package This is a useful primitive for asynchronous execution of ordered work I want to use in another change. Updates tailscale/corp#16833 Signed-off-by: James Tucker <james@tailscale.com>	11 months ago
Joe Tsai	c25968e1c5	all: make use of ctxkey everywhere (#10846 ) Also perform minor cleanups on the ctxkey package itself. Provide guidance on when to use ctxkey.Key[T] over ctxkey.New. Also, allow for interface kinds because the value wrapping trick also happens to fix edge cases with interfaces in Go. Updates #cleanup Signed-off-by: Joe Tsai <joetsai@digital-static.net>	11 months ago
Irbe Krumina	1c3c3d6752	cmd/k8s-operator: warn if unsupported Ingress Exact path type is used. (#10865 ) To reduce the likelihood of breaking users, if we implement stricter Exact path type matching in the future. Updates tailscale/tailscale#10730 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	11 months ago
Irbe Krumina	50b52dbd7d	cmd/k8s-operator: sync StatefulSet labels to their Pods (#10861 ) So that users have predictable label values to use when configuring network policies. Updates tailscale/tailscale#10854 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	11 months ago
Irbe Krumina	d0492fdee5	cmd/k8s-operator: adds a tailscale IngressClass resource, prints warning if class not found. (#10823 ) * cmd/k8s-operator/deploy: deploy a Tailscale IngressClass resource. Some Ingress validating webhooks reject Ingresses with .spec.ingressClassName for which there is no matching IngressClass. Additionally, validate that the expected IngressClass is present, when parsing a tailscale `Ingress`. We currently do not utilize the IngressClass, however we might in the future at which point we might start requiring that the right class for this controller instance actually exists. Updates tailscale/tailscale#10820 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Anton Tolchanov <anton@tailscale.com>	11 months ago
Charlotte Brandhorst-Satzkorn	e6910974ca	cmd/tailscale/cli: add description to exit-node CLI command This change adds a description to the exit-node CLI command. This description will be displayed when using `tailscale -h` and `tailscale exit-node -h`. Fixes #10787 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	11 months ago
Irbe Krumina	169778e23b	cmd/k8s-operator: minor fix in name gen (#10830 ) Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	11 months ago
Irbe Krumina	5cc1bfe82d	cmd/k8s-operator: remove configuration knob for Connector (#10791 ) The configuration knob (that defaulted to Connector being disabled) was added largely because the Connector CRD had to be installed in a separate step. Now when the CRD has been added to both chart and static manifest, we can have it on by default. Updates tailscale/tailscale#10878 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	11 months ago
Irbe Krumina	469af614b0	cmd/k8s-operator: fix base truncating for extra long Service names (#10825 ) cmd/k8s-operator: fix base truncating for extra long Service names StatefulSet names for ingress/egress proxies are calculated using Kubernetes name generator and the parent resource name as a base. The name generator also cuts the base, but has a higher max cap. This commit fixes a bug where, if we get a shortened base back from the generator, we cut off too little as the base that we have cut will be passed into the generator again, which will then itself cut less because the base is shorter- so we end up with a too long name again. Updates tailscale/tailscale#10807 Co-authored-by: Maisem Ali <maisem@tailscale.com> Signed-off-by: Irbe Krumina <irbekrm@gmail.com>	11 months ago
Andrew Lytvynov	4ec6a78551	go.mod: update golang-x-crypto fork (#10786 ) Pick up a bunch of recent upstream commits. Updates #8593 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	11 months ago
Irbe Krumina	35f49ac99e	cmd/k8s-operator: add Connector CRD to Helm chart and static manifests (#10775 ) cmd/k8s-operator: add CRD to chart and static manifest Add functionality to insert CRD to chart at package time. Insert CRD to static manifests as this is where they are currently consumed from. Signed-off-by: Irbe Krumina <irbe@tailscale.com>	11 months ago
Sonia Appasamy	ea9c7f991a	cli/set: add printout when web client started Prints a helpful message with the web UI's address when running tailscale set --webclient. Updates tailscale/corp#16345 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	11 months ago
Rhea Ghosh	4ce33c9758	taildrop: remove breaking abstraction layers for apple (#10728 ) Removes the avoidFinalRename logic and all associated code as it is no longer required by the Apple clients. Enables resume logic to be usable for Apple clients. Fixes tailscale/corp#14772 Signed-off-by: Rhea Ghosh <rhea@tailscale.com>	11 months ago
Andrew Dunham	20f3f706a4	net/netutil: allow 16-bit 4via6 site IDs The prefix has space for 32-bit site IDs, but the validateViaPrefix function would previously have disallowed site IDs greater than 255. Fixes tailscale/corp#16470 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I4cdb0711dafb577fae72d86c4014cf623fa538ef	11 months ago
Irbe Krumina	05093ea7d9	cmd/k8s-operator,k8s-operator: allow the operator to deploy exit nodes via Connector custom resource (#10724 ) cmd/k8s-operator/deploy/crds,k8s-operator/apis/v1alpha1: allow to define an exit node via Connector CR. Make it possible to define an exit node to be deployed to a Kubernetes cluster via Connector Custom resource. Also changes to Connector API so that one Connector corresponds to one Tailnet node that can be either a subnet router or an exit node or both. The Kubernetes operator parses Connector custom resource and, if .spec.isExitNode is set, configures that Tailscale node deployed for that connector as an exit node. Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Anton Tolchanov <anton@tailscale.com>	11 months ago
James Tucker	953fa80c6f	cmd/{derper,stund},net/stunserver: add standalone stun server Add a standalone server for STUN that can be hosted independently of the derper, and factor that back into the derper. Fixes #8434 Closes #8435 Closes #10745 Signed-off-by: James Tucker <james@tailscale.com>	11 months ago
Irbe Krumina	133699284e	cmd/containerboot: add EXPERIMENTAL_TS_CONFIGFILE_PATH env var to allow passing tailscaled config in a file (#10759 ) * cmd/containerboot: optionally configure tailscaled with a configfile. If EXPERIMENTAL_TS_CONFIGFILE_PATH env var is set, only run tailscaled with the provided config file. Do not run 'tailscale up' or 'tailscale set'. * cmd/containerboot: store containerboot accept_dns val in bool pointer So that we can distinguish between the value being set to false explicitly bs being unset. Signed-off-by: Irbe Krumina <irbe@tailscale.com>	11 months ago
Adrian Dewhurst	c05c4bdce4	ipn: apply ControlURL policy before login Unlike most prefs, the ControlURL policy needs to take effect before login. This resolves an issue where on first start, even when the ControlURL policy is set, it will generate a login URL to the Tailscale SaaS server. Updates tailscale/coral#118 Fixes #10736 Change-Id: I6da2a521f64028c15dbb6ac8175839fc3cc4e858 Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>	11 months ago
Andrew Dunham	d3574a350f	cmd/tailscale, ipn/ipnlocal: add 'debug dial-types' command This command allows observing whether a given dialer ("SystemDial", "UserDial", etc.) will successfully obtain a connection to a provided host, from inside tailscaled itself. This is intended to help debug a variety of issues from subnet routers to split DNS setups. Updates #9619 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ie01ebb5469d3e287eac633ff656783960f697b84	11 months ago
Andrew Dunham	46bdbb3878	cmd/tailscaled, tsnet: don't return an interface containing a nil pointer This tripped me up when I was testing something and wrote: if conn != nil { conn.Close() } In netstack mode, when an error occurred we were getting a non-nil error and a non-nil interface that contained a nil pointer. Instead, just return a nil interface value. Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Id9ef3dd24529e0e8c53adc60ed914c31fbb10cc4	11 months ago
Irbe Krumina	3a9450bc06	cmd/containerboot: don't parse empty subnet routes (#10738 ) Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	11 months ago
Irbe Krumina	5a2eb26db3	cmd/containerboot: ensure that subnet routes can be unset. (#10734 ) A Tailnet node can be told to stop advertise subnets by passing an empty string to --advertise-routes flag. Respect an explicitly passed empty value to TS_ROUTES env var so that users have a way to stop containerboot acting as a subnet router without recreating it. Distinguish between TS_ROUTES being unset and empty. Updates tailscale/tailscale#10708 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	11 months ago
Aaron Klotz	e32a064659	cmd/tailscaled: don't create a network monitor in the parent tailscaled on Windows The service is only used as a watchdog and for piping logs from the child process. We shouldn't be creating a network monitor in that case. Fixes #10732 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	11 months ago
Chris Palmer	5deeb56b95	cmd/tailscale/cli: document usage more clearly (#10681 ) The IP argument is required; only the port is optional. Updates #10605 Signed-off-by: Chris Palmer <cpalmer@tailscale.com>	11 months ago
Andrew Lytvynov	2716250ee8	all: cleanup unused code, part 2 (#10670 ) And enable U1000 check in staticcheck. Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	12 months ago
Gavin Greenwalt	865ee25a57	cmd/tailscale/cli: update debug.go (#10644 ) redundant run "portmap debugging" word 'debugging' Signed-off-by: Gavin Greenwalt <gavin@sfstudios.com>	12 months ago
Andrew Dunham	a661287c4b	util/cmpx: remove code that's in the stdlib now The cmpx.Compare function (and associated interface) are now available in the standard library as cmp.Compare. Remove our version of it and use the version from the standard library. Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I4be3ac63d466c05eb7a0babb25cb0d41816fbd53	12 months ago
Andrew Lytvynov	945cf836ee	ipn: apply tailnet-wide default for auto-updates (#10508 ) When auto-update setting in local Prefs is unset, apply the tailnet default value from control. This only happens once, when we apply the default (or when the user manually overrides it), tailnet default no longer affects the node. Updates #16244 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	12 months ago
Andrew Dunham	d05a572db4	net/portmapper: handle multiple UPnP discovery responses Instead of taking the first UPnP response we receive and using that to create port mappings, store all received UPnP responses, sort and deduplicate them, and then try all of them to obtain an external address. Updates #10602 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I783ccb1834834ee2a9ecbae2b16d801f2354302f	12 months ago
Irbe Krumina	38b4eb9419	cmd/k8s-operator/deploy/chart: document passing multiple proxy tags + log level values (#10624 ) Updates #cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	12 months ago
James Tucker	3a635db06e	cmd/connector-gen: add helper tool for wide app connector configurations connector-gen can initially generate connector ACL snippets and advertise-routes flags for Github and AWS based on their public IP / domain data. Updates ENG-2425 Signed-off-by: James Tucker <james@tailscale.com>	12 months ago
Irbe Krumina	1a08ea5990	cmd/k8s-operator: operator can create subnetrouter (#9505 ) * k8s-operator,cmd/k8s-operator,Makefile,scripts,.github/workflows: add Connector kube CRD. Connector CRD allows users to configure the Tailscale Kubernetes operator to deploy a subnet router to expose cluster CIDRs or other CIDRs available from within the cluster to their tailnet. Also adds various CRD related machinery to generate CRD YAML, deep copy implementations etc. Engineers will now have to run 'make kube-generate-all` after changing kube files to ensure that all generated files are up to date. * cmd/k8s-operator,k8s-operator: reconcile Connector resources Reconcile Connector resources, create/delete subnetrouter resources in response to changes to Connector(s). Connector reconciler will not be started unless ENABLE_CONNECTOR env var is set to true. This means that users who don't want to use the alpha Connector custom resource don't have to install the Connector CRD to their cluster. For users who do want to use it the flow is: - install the CRD - install the operator (via Helm chart or using static manifests). For Helm users set .values.enableConnector to true, for static manifest users, set ENABLE_CONNECTOR to true in the static manifest. Updates tailscale/tailscale#502 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	12 months ago
Andrew Dunham	727acf96a6	net/netcheck: use DERP frames as a signal for home region liveness This uses the fact that we've received a frame from a given DERP region within a certain time as a signal that the region is stil present (and thus can still be a node's PreferredDERP / home region) even if we don't get a STUN response from that region during a netcheck. This should help avoid DERP flaps that occur due to losing STUN probes while still having a valid and active TCP connection to the DERP server. RELNOTE=Reduce home DERP flapping when there's still an active connection Updates #8603 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: If7da6312581e1d434d5c0811697319c621e187a0	12 months ago
Maisem Ali	3aa6468c63	cmd/tailscale/cli: add whois subcommand Initial implementation of a `tailscale whois` subcommand which allows users to observe metadata associated with a Tailscale IP. It also has a `--json` flag to allow consumption programmatically. Updates #4217 Signed-off-by: Maisem Ali <maisem@tailscale.com>	12 months ago
Maisem Ali	fb632036e3	cmd/k8s-operator: drop https:// in capName Add the new format but keep respecting the old one. Updates #4217 Signed-off-by: Maisem Ali <maisem@tailscale.com>	12 months ago
Sonia Appasamy	c2fe123232	cmd/tailscaled: update ConfigureWebClient's UseSocketOnly value Previously were always setting `UseSocketOnly` because we were comparing `args.socketpath != ""`, but `args.socketpath` flag always gets filled with `paths.DefaultTailscaledSocket()` when not provided. Rather than comparing to the empty string, compare to the default value to determine if `UseSocketOnly` should be set. Should fix issue with web client being unreachable for Mac App Store variant of the mac build. Updates #16054 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	12 months ago
Andrew Lytvynov	d8493d4bd5	clientupdate: add explicit Track to Arguments (#10548 ) Instead of overloading the Version field, add an explicit Track field. This fixes a bug where passing a track name in `args.Version` would keep the track name in `updater.Version` and pass it down the code path to commands like `apt-get install`. Now, `updater.Version` should always be a version (or empty string). Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	12 months ago
Maisem Ali	7bdea283bd	cmd/containerboot: symlink TS_SOCKET to socket expected by CLI `tailscaled` and `tailscale` expect the socket to be at `/var/run/tailscale/tailscaled.sock`, however containerboot would set up the socket at `/tmp/tailscaled.sock`. This leads to a poor UX when users try to use any `tailscale` command as they have to prefix everything with `--socket /tmp/tailscaled.sock`. To improve the UX, this adds a symlink to `/var/run/tailscale/tailscaled.sock` to point to `/tmp/tailscaled.sock`. This approach has two benefits, 1 users are able to continue to use existing scripts without this being a breaking change. 2. users are able to use the `tailscale` CLI without having to add the `--socket` flag. Fixes tailscale/corp#15902 Fixes #6849 Fixes #10027 Signed-off-by: Maisem Ali <maisem@tailscale.com>	12 months ago
Andrew Lytvynov	e25f114916	ipn,cmd/tailscale/cli: support hierarchical MaskedPrefs (#10507 ) Some fields if `ipn.Prefs` are structs. `ipn.MaskedPrefs` has a single level of boolean `*Set` flags, which doesn't map well to nested structs within `ipn.Prefs`. Change `MaskedPrefs` and `ApplyEdits` to support `FooSet` struct fields that map to a nested struct of `ipn.Prefs` like `AutoUpdates`. Each struct field in `MaskedPrefs` is just a bundle of more `Set` bool fields or other structs. This allows you to have a `Set` flag for any arbitrarily-nested field of `ipn.Prefs`. Also, make `ApplyEdits` match fields between `Prefs` and `MaskedPrefs` by name instead of order, to make it a bit less finicky. It's probably slower but `ipn.ApplyEdits` should not be in any hot path. As a result, `AutoUpdate.Check` and `AutoUpdate.Apply` fields don't clobber each other when set individually. Updates #16247 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	12 months ago
Aaron Klotz	0f646937e9	clientupdate: remove TS_NOLAUNCH and GUI restart hacks from autoupdate We've fixed the underlying issue in github.com/tailscale/corp/issues/13998. Fixes #10513 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	12 months ago
Sonia Appasamy	e5e5ebda44	client/web: precompress assets Precompress webclient assets with precompress util. This cuts our css and js build sizes to about 1/3 of non-compressed size. Similar compression done on tsconnect and adminhttp assets. Updates #10261 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	12 months ago
Andrew Dunham	3f576fc4ca	ci: run 'go vet' in golangci-lint; fix errors in tests Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ice78fc907bad24c1de749a1595e212ef2db4b8bb	1 year ago
Naman Sood	0a59754eda	linuxfw,wgengine/route,ipn: add c2n and nodeattrs to control linux netfilter Updates tailscale/corp#14029. Signed-off-by: Naman Sood <mail@nsood.in>	1 year ago
Matt Layher	a217f1fccf	all: fix nilness issues Signed-off-by: Matt Layher <mdlayher@gmail.com>	1 year ago
Irbe Krumina	49fd0a62c9	cmd/k8s-operator: generate static kube manifests from the Helm chart. (#10436 ) * cmd/k8s-operator: generate static manifests from Helm charts This is done to ensure that there is a single source of truth for the operator kube manifests. Also adds linux node selector to the static manifests as this was added as a default to the Helm chart. Static manifests can now be generated by running `go generate tailscale.com/cmd/k8s-operator`. Updates tailscale/tailscale#9222 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	1 year ago
Sonia Appasamy	7a4ba609d9	client/web: show features based on platform support Hiding/disabling UI features when not available on the running client. Updates #10261 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	1 year ago
Marwan Sulaiman	b819f66eb1	tsweb: propagate RequestID via context and entire request The recent addition of RequestID was only populated if the HTTP Request had returned an error. This meant that the underlying handler has no access to this request id and any logs it may have emitted were impossible to correlate to that request id. Therefore, this PR adds a middleware to generate request ids and pass them through the request context. The tsweb.StdHandler automatically populates this request id if the middleware is being used. Finally, inner handlers can use the context to retrieve that same request id and use it so that all logs and events can be correlated. Updates #2549 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	1 year ago
Claire Wang	8af503b0c5	syspolicy: add exit node related policies (#10172 ) Adds policy keys ExitNodeID and ExitNodeIP. Uses the policy keys to determine the exit node in preferences. Fixes tailscale/corp#15683 Signed-off-by: Claire Wang <claire@tailscale.com>	1 year ago
Andrew Lytvynov	ac4b416c5b	cmd/tailscale,ipn/ipnlocal: pass available update as health message (#10420 ) To be consistent with the formatting of other warnings, pass available update health message instead of handling ClientVersion in he CLI. Fixes #10312 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	1 year ago
Andrew Lytvynov	5a9e935597	clientupdate: implement update for Unraid (#10344 ) Use the [`plugin` CLI](https://forums.unraid.net/topic/72240-solved-is-there-a-way-to-installuninstall-plugins-from-script/#comment-676870) to fetch and apply the update. Updates https://github.com/tailscale/tailscale/issues/10184 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	1 year ago
Sonia Appasamy	5f40b8a0bc	scripts/check_license_headers: enforce license on ts/tsx files Enforcing inclusion of our OSS license at the top of .ts and .tsx files. Also updates any relevant files in the repo that were previously missing the license comment. An additional `@license` comment is added to client/web/src/index.tsx to preserve the license in generated Javascript. Updates #10261 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	1 year ago
Jenny Zhang	d5d84f1a68	cmd/tailscale: also warn about IP forwarding if using CLI set We warn users about IP forwarding being disabled when using `--avertise-routes` in `tailscale up`, this adds the same warnings to `tailscale set`. Updates tailscale/corp#9968 Signed-off-by: Jenny Zhang <jz@tailscale.com>	1 year ago
Irbe Krumina	18ceb4e1f6	cmd/{containerboot,k8s-operator}: allow users to define tailnet egress target by FQDN (#10360 ) * cmd/containerboot: proxy traffic to tailnet target defined by FQDN Add a new Service annotation tailscale.com/tailnet-fqdn that users can use to specify a tailnet target for which an egress proxy should be deployed in the cluster. Updates tailscale/tailscale#10280 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	1 year ago
Claire Wang	afacf2e368	containerboot: Add TS_ACCEPT_ROUTES (#10176 ) Fixes tailscale/corp#15596 Signed-off-by: Claire Wang <claire@tailscale.com>	1 year ago
Gabriel Martinez	128d3ad1a9	cmd/k8s-operator: helm chart add missing keys (#10296 ) * cmd/k8s-operator: add missing keys to Helm values file Updates #10182 Signed-off-by: Gabriel Martinez <gabrielmartinez@sisti.pt>	1 year ago

... 2 3 4 5 6 ...

1939 Commits (e865a0e2b04b9d9a4480bc5e4f4a2683c5e5c2cc)