tailscale

Commit Graph

Author	SHA1	Message	Date
Maisem Ali	af97e7a793	tailcfg,all: add/plumb Node.IsJailed This adds a new bool that can be sent down from control to do jailing on the client side. Previously this would only be done from control by modifying the packet filter we sent down to clients. This would result in a lot of additional work/CPU on control, we could instead just do this on the client. This has always been a TODO which we keep putting off, might as well do it now. Updates tailscale/corp#19623 Signed-off-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Claire Wang	e0287a4b33	wgengine: add exit destination logging enable for wgengine logger (#11952 ) Updates tailscale/corp#18625 Co-authored-by: Kevin Liang <kevinliang@tailscale.com> Signed-off-by: Claire Wang <claire@tailscale.com>	7 months ago
Brad Fitzpatrick	8b9474b06a	wgengine/wgcfg: don't send UAPI to disable keep-alives on new peers That's already the default. Avoid the overhead of writing it on one side and reading it on the other to do nothing. Updates #cleanup (noticed while researching something else) Change-Id: I449c88a022271afb9be5da876bfaf438fe5d3f58 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Tom DNetto	c08cf2a9c6	all: declare & plumb IPv6 masquerade address for peer This PR plumbs through awareness of an IPv6 SNAT/masquerade address from the wire protocol through to the low-level (tstun / wgengine). This PR is the first in two PRs for implementing IPv6 NAT support to/from peers. A subsequent PR will implement the data-plane changes to implement IPv6 NAT - this is just plumbing. Signed-off-by: Tom DNetto <tom@tailscale.com> Updates ENG-991	1 year ago
Maisem Ali	64bbf1738e	tailcfg: make SelfNodeV4MasqAddrForThisPeer a pointer This makes `omitempty` actually work, and saves bytes in each map response. Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	985535aebc	net/tstun,wgengine/*: add support for NAT to routes This adds support to make exit nodes and subnet routers work when in scenarios where NAT is required. It also updates the NATConfig to be generated from a `wgcfg.Config` as that handles merging prefs with the netmap, so it has the required information about whether an exit node is already configured and whether routes are accepted. Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Joe Tsai	0d19f5d421	all: replace logtail.{Public,Private}ID with logid.{Public,Private}ID (#7404 ) The log ID types were moved to a separate package so that code that only depend on log ID types do not need to link in the logic for the logtail client itself. Not all code need the logtail client. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Joe Tsai	a3602c28bd	wgengine/netlog: embed the StableNodeID of the authoring node (#6105 ) This allows network messages to be annotated with which node it came from. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	82f5f438e0	wgengine/wgcfg: plumb down audit log IDs (#5855 ) The node and domain audit log IDs are provided in the map response, but are ultimately going to be used in wgengine since that's the layer that manages the tstun.Wrapper. Do the plumbing work to get this field passed down the stack. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	e409e59a54	cmd/cloner,util/codegen: refactor cloner internals to allow reuse Also run go generate again for Copyright updates. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Josh Bleecher Snyder	85184a58ed	wgengine/wgcfg: recover from mismatched PublicKey/Endpoints In rare circumstances (tailscale/corp#3016), the PublicKey and Endpoints can diverge. This by itself doesn't cause any harm, but our early exit in response did, because it prevented us from recovering from it. Remove the early exit. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
David Anderson	ef241f782e	wgengine/magicsock: remove uses of tailcfg.DiscoKey. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	a9c78910bd	wgengine/wgcfg: convert to use new node key type. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	bb10443edf	wgengine/wgcfg: use just the hexlified node key as the WireGuard endpoint. The node key is all magicsock needs to find the endpoint that WireGuard needs. Updates #2752 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	97693f2e42	wgengine/magicsock: delete legacy AddrSet endpoints. Instead of using the legacy codepath, teach discoEndpoint to handle peers that have a home DERP, but no disco key. We can still communicate with them, but only over DERP. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Josh Bleecher Snyder	aacb2107ae	all: add extra information to serialized endpoints magicsock.Conn.ParseEndpoint requires a peer's public key, disco key, and legacy ip/ports in order to do its job. We currently accomplish that by: * adding the public key in our wireguard-go fork * encoding the disco key as magic hostname * using a bespoke comma-separated encoding It's a bit messy. Instead, switch to something simpler: use a json-encoded struct containing exactly the information we need, in the form we use it. Our wireguard-go fork still adds the public key to the address when it passes it to ParseEndpoint, but now the code compensating for that is just a couple of simple, well-commented lines. Once this commit is in, we can remove that part of the fork and remove the compensating code. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	bc68e22c5b	all: s/CreateEndpoint/ParseEndpoint/ in docs Upstream wireguard-go renamed the interface method from CreateEndpoint to ParseEndpoint. I missed some comments. Fix them. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	73ad1f804b	wgengine/wgcfg: use autogenerated Clone methods Delete the manually written ones named Copy. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	7ee891f5fd	all: delete wgcfg.Key and wgcfg.PrivateKey For historical reasons, we ended up with two near-duplicate copies of curve25519 key types, one in the wireguard-go module (wgcfg) and one in the tailscale module (types/wgkey). Then we moved wgcfg to the tailscale module. We can now remove the wgcfg key type in favor of wgkey. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	69cdc30c6d	wgengine/wgcfg: remove Config.ListenPort We don't use the port that wireguard-go passes to us (via magicsock.connBind.Open). We ignore it entirely and use the port we selected. When we tell wireguard-go that we're changing the listen_port, it calls connBind.Close and then connBind.Open. And in the meantime, it stops calling the receive functions, which means that we stop receiving and processing UDP and DERP packets. And that is Very Bad. That was never a problem prior to `b3ceca1dd7`, because we passed the SkipBindUpdate flag to our wireguard-go fork, which told wireguard-go not to re-bind on listen_port changes. That commit eliminated the SkipBindUpdate flag. We could write a bunch of code to work around the gap. We could add background readers that process UDP and DERP packets when wireguard-go isn't. But it's simpler to never create the conditions in which wireguard-go rebinds. The other scenario in which wireguard-go re-binds is device.Down. Conveniently, we never call device.Down. We go from device.Up to device.Close, and the latter only when we're shutting down a magicsock.Conn completely. Rubber-ducked-by: Avery Pennarun <apenwarr@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	6064b6ff47	wgengine/wgcfg/nmcfg: split control/controlclient/netmap.go into own package It couldn't move to ipnlocal due to test dependency cycles. Updates #1278 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	fe7c3e9c17	all: move wgcfg from wireguard-go This is mostly code movement from the wireguard-go repo. Most of the new wgcfg package corresponds to the wireguard-go wgcfg package. wgengine/wgcfg/device{_test}.go was device/config{_test}.go. There were substantive but simple changes to device_test.go to remove internal package device references. The API of device.Config (now wgcfg.DeviceConfig) grew an error return; we previously logged the error and threw it away. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago

25 Commits (e84751217a79e9e65be74f17b7595d04dcde0fef)