tailscale

Commit Graph

Author	SHA1	Message	Date
David Anderson	ac07ff43bf	cmd/tailscaled: start after NetworkManager and systemd-resolved. The dependency is a "soft" ordering dependency only, meaning that tailscaled will start after those services if those services were going to be run anyway, but doesn't force either of them to run. That's why it's safe to specify this dependency unconditionally, even for systems that don't run those services. Updates #2127. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	80a4052593	cmd/tailscale, wgengine, tailcfg: don't assume LastSeen is present [mapver 20] Updates #2107 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Christine Dodrill	8b2b899989	tstest/integration: test Alpine Linux (#2098 ) Alpine Linux[1] is a minimal Linux distribution built around musl libc. It boots very quickly, requires very little ram and is as close as you can get to an ideal citizen for testing Tailscale on musl. Alpine has a Tailscale package already[2], but this patch also makes it easier for us to provide an Alpine Linux package off of pkgs in the future. Alpine only offers Tailscale on the rolling-release edge branch. [1]: https://alpinelinux.org/ [2]: https://pkgs.alpinelinux.org/packages?name=tailscale&branch=edge Updates #1988 Signed-off-by: Christine Dodrill <xe@tailscale.com>	4 years ago
Maisem Ali	f944614c5c	cmd/tailscale/web: add support for QNAP Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Matt Layher	6956645ec8	go.mod: bump github.com/mdlayher/netlink to v1.4.1 Signed-off-by: Matt Layher <mdlayher@gmail.com>	4 years ago
David Anderson	1c6946f971	cmd/mkpkg: allow zero files in a package. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Maisem Ali	95e296fd96	cmd/tailscale/web: restrict web access to synology admins. Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Adrian Dewhurst	6d6cf88d82	control/controlclient: use our fork of certstore The cyolosecurity fork of certstore did not update its module name and thus can only be used with a replace directive. This interferes with installing using `go install` so I created a tailscale fork with an updated module name. Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>	4 years ago
David Crawshaw	82b217f82e	cmd/tailscale: have web POST wait for authURL Fixes #1939 Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
David Crawshaw	50c976d3f1	cmd/tailscale: show web 'login' error message For #1939 Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
Brad Fitzpatrick	d2c4e75099	cmd/tailscale/cli: update URL in error message for Synology unsupported feature Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	cdd231cb7d	cmd/tailscale/cli: don't warn about iptables=off on Synology We don't use iptables on Synology, so don't scare the user. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	1ece91cede	go.mod: upgrade wireguard-windows, de-fork wireguard-go Pull in the latest version of wireguard-windows. Switch to upstream wireguard-go. This requires reverting all of our import paths. Unfortunately, this has to happen at the same time. The wireguard-go change is very low risk, as that commit matches our fork almost exactly. (The only changes are import paths, CI files, and a go.mod entry.) So if there are issues as a result of this commit, the first place to look is wireguard-windows changes. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	a86a0361a7	go.mod: upgrade all deps At the start of a dev cycle we'll upgrade all dependencies. Done with: $ for Dep in $(cat go.mod \| perl -ne '/(\S+) v/ and print "$1\n"'); do go get $Dep@upgrade; done Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	5666663370	net/packet: use netaddr AppendTo methods This lets us remote the types/strbuilder package, which had only a single user. And it's faster. name old time/op new time/op delta String/tcp4-8 175ns ± 0% 58ns ± 1% -66.95% (p=0.000 n=10+9) String/tcp6-8 226ns ± 1% 136ns ± 1% -39.85% (p=0.000 n=10+10) String/udp4-8 175ns ± 1% 58ns ± 1% -67.01% (p=0.000 n=10+9) String/udp6-8 230ns ± 1% 140ns ± 0% -39.32% (p=0.000 n=10+9) String/icmp4-8 164ns ± 0% 50ns ± 1% -69.89% (p=0.000 n=10+10) String/icmp6-8 217ns ± 1% 129ns ± 0% -40.46% (p=0.000 n=10+10) String/igmp-8 196ns ± 0% 56ns ± 1% -71.32% (p=0.000 n=10+10) String/unknown-8 2.06ns ± 1% 2.06ns ± 2% ~ (p=0.985 n=10+10) name old alloc/op new alloc/op delta String/tcp4-8 32.0B ± 0% 32.0B ± 0% ~ (all equal) String/tcp6-8 168B ± 0% 96B ± 0% -42.86% (p=0.000 n=10+10) String/udp4-8 32.0B ± 0% 32.0B ± 0% ~ (all equal) String/udp6-8 168B ± 0% 96B ± 0% -42.86% (p=0.000 n=10+10) String/icmp4-8 32.0B ± 0% 32.0B ± 0% ~ (all equal) String/icmp6-8 104B ± 0% 64B ± 0% -38.46% (p=0.000 n=10+10) String/igmp-8 48.0B ± 0% 48.0B ± 0% ~ (all equal) String/unknown-8 0.00B 0.00B ~ (all equal) name old allocs/op new allocs/op delta String/tcp4-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) String/tcp6-8 3.00 ± 0% 1.00 ± 0% -66.67% (p=0.000 n=10+10) String/udp4-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) String/udp6-8 3.00 ± 0% 1.00 ± 0% -66.67% (p=0.000 n=10+10) String/icmp4-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) String/icmp6-8 3.00 ± 0% 1.00 ± 0% -66.67% (p=0.000 n=10+10) String/igmp-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) String/unknown-8 0.00 0.00 ~ (all equal) Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Maisem Ali	234cc87f48	cmd/tailscaled: use the wf package instead of wireguard-windows/firewall Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Josh Bleecher Snyder	25df067dd0	all: adapt to opaque netaddr types This commit is a mishmash of automated edits using gofmt: gofmt -r 'netaddr.IPPort{IP: a, Port: b} -> netaddr.IPPortFrom(a, b)' -w . gofmt -r 'netaddr.IPPrefix{IP: a, Port: b} -> netaddr.IPPrefixFrom(a, b)' -w . gofmt -r 'a.IP.Is4 -> a.IP().Is4' -w . gofmt -r 'a.IP.As16 -> a.IP().As16' -w . gofmt -r 'a.IP.Is6 -> a.IP().Is6' -w . gofmt -r 'a.IP.As4 -> a.IP().As4' -w . gofmt -r 'a.IP.String -> a.IP().String' -w . And regexps: \w(.)\.Port = (.) -> $1 = $1.WithPort($2) \w(.)\.IP = (.) -> $1 = $1.WithIP($2) And lots of manual fixups. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	6f62bbae79	cmd/tailscale: make ping --until-direct require direct connection to exit 0 If --until-direct is set, the goal is to make a direct connection. If we failed at that, say so, and exit with an error. RELNOTE=tailscale ping --until-direct (the default) now exits with a non-zero exit code if no direct connection was established. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	36a26e6a71	internal/deephash: rename from deepprint Yes, it printed, but that was an implementation detail for hashing. And coming optimization will make it print even less. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Maisem Ali	7027fa06c3	wf: implement windows firewall using inet.af/wf. Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Brad Fitzpatrick	5190435d6e	cmd/tailscale: rewrite the "up" checker, fix bugs The old way was way too fragile and had felt like it had more special cases than normal cases. (see #1874, #1860, #1834, etc) It became very obvious the old algorithm didn't work when we made the output be pretty and try to show the user the command they need to run in `5ecc7c7200` for #1746) The new algorithm is to map the prefs (current and new) back to flags and then compare flags. This nicely handles the OS-specific flags and the n:1 and 1:n flag:pref cases. No change in the existing already-massive test suite, except some ordering differences (the missing items are now sorted), but some new tests are added for behavior that was broken before. In particular, it now: * preserves non-pref boolean flags set to false, and preserves exit node IPs (mapping them back from the ExitNodeID pref, as well as ExitNodeIP), * doesn't ignore --advertise-exit-node when doing an EditPrefs call (#1880) * doesn't lose the --operator on the non-EditPrefs paths (e.g. with --force-reauth, or when the backend was not in state Running). Fixes #1880 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	e78e26b6fb	cmd/tailscale: fix another up warning with exit nodes The --advertise-routes and --advertise-exit-node flags both mutating one pref is the gift that keeps on giving. I need to rewrite the this up warning code to first map prefs back to flag values and then just compare flags instead of comparing prefs, but this is the minimal fix for now. This also includes work on the tests, to make them easier to write (and more accurate), by letting you write the flag args directly and have that parse into the upArgs/MaskedPrefs directly, the same as the code, rather than them being possibly out of sync being written by hand. Fixes https://twitter.com/EXPbits/status/1390418145047887877 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	2585edfaeb	cmd/tailscale: fix tailscale up --advertise-exit-node validation Fixes #1859 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	52e1031428	cmd/tailscale: gofmt From `6d10655dc3` Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Avery Pennarun	6d10655dc3	ipnlocal: accept a new opts.UpdatePrefs field. This is needed because the original opts.Prefs field was at some point subverted for use in frontend->backend state migration for backward compatibility on some platforms. We still need that feature, but we also need the feature of providing the full set of prefs from `tailscale up`, not including overwriting the prefs.Persist keys, so we can't use the original field from `tailscale up`. `tailscale up` had attempted to compensate for that by doing SetPrefs() before Start(), but that violates the ipn.Backend contract, which says you should call Start() before anything else (that's why it's called Start()). As a result, doing SetPrefs({ControlURL=..., WantRunning=true}) would cause a connection to the previous control server (because WantRunning=true), and then connect to the new control server only after running Start(). This problem may have been avoided before, but only by pure luck. It turned out to be relatively harmless since the connection to the old control server was immediately closed and replaced anyway, but it created a race condition that could have caused spurious notifications or rejected keys if the server responded quickly. As already covered by existing TODOs, a better fix would be to have Start() get out of the business of state migration altogether. But we're approaching a release so I want to make the minimum possible fix. Fixes #1840. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Josh Bleecher Snyder	7dbbe0c7c7	cmd/tailscale/cli: fix running from Xcode We were over-eager in running tailscale in GUI mode. `f42ded7acf` fixed that by checking for a variety of shell-ish env vars and using those to force us into CLI mode. However, for reasons I don't understand, those shell env vars are present when Xcode runs Tailscale.app on my machine. (I've changed no configs, modified nothing on a brand new machine.) Work around that by adding an additional "only in GUI mode" check. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	9360f36ebd	all: use lower-case letters at the start of error message Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Brad Fitzpatrick	962bf74875	cmd/tailscale: fail if tailscaled closes the IPN connection I was going to write a test for this using the tstest/integration test stuff, but the testcontrol implementation isn't quite there yet (it always registers nodes and doesn't provide AuthURLs). So, manually tested for now. Fixes #1843 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Crawshaw	1f48d3556f	cmd/tailscale/cli: don't report outdated auth URL to web UI This brings the web 'up' logic into line with 'tailscale up'. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
David Crawshaw	1336ed8d9e	cmd/tailscale/cli: skip new tab on web login It doesn't work properly. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
Brad Fitzpatrick	ca65c6cbdb	cmd/tailscale: make 'file cp' have better error messages on bad targets Say when target isn't owned by current user, and when target doesn't exist in netmap. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	90002be6c0	cmd/tailscale: make pref-revert checks ignore OS-irrelevant prefs This fixes #1833 in two ways: * stop setting NoSNAT on non-Linux. It only matters on Linux and the flag is hidden on non-Linux, but the code was still setting it. Because of that, the new pref-reverting safety checks were failing when it was changing. * Ignore the two Linux-only prefs changing on non-Linux. Fixes #1833 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	fb67d8311c	cmd/tailscale: pull out, parameterize up FlagSet creation for tests Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	f6e3240dee	cmd/tailscale/cli: add test to catch ipn.Pref additions	4 years ago
Avery Pennarun	6caa02428e	cmd/tailscale/cli/up: "LoggedOut" pref is implicit. There's no need to warn that it was not provided on the command line after doing a sequence of up; logout; up --args. If you're asking for tailscale to be up, you always mean that you prefer LoggedOut to become false. Fixes #1828 Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	19c3e6cc9e	types/logger: rate limited: more hysteresis, better messages. - Switch to our own simpler token bucket, since x/time/rate is missing necessary stuff (can't provide your own time func; can't check the current bucket contents) and it's overkill anyway. - Add tests that actually include advancing time. - Don't remove the rate limit on a message until there's enough room to print at least two more of them. When we do, we'll also print how many we dropped, as a contextual reminder that some were previously lost. (This is more like how the Linux kernel does it.) - Reformat the [RATE LIMITED] messages to be shorter, and to not corrupt original message. Instead, we print the message, then print its format string. - Use %q instead of \"%s\", for more accurate parsing later, if the format string contained quotes. Fixes #1772 Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Josh Bleecher Snyder	20e04418ff	net/dns: add GOOS build tags Fixes #1786 Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
David Anderson	72b6d98298	net/interfaces: return all Tailscale addresses from Tailscale(). Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Josh Bleecher Snyder	3c543c103a	wgengine/magicsock: unify initial bind and rebind We had two separate code paths for the initial UDP listener bind and any subsequent rebinds. IPv6 got left out of the rebind code. Rather than duplicate it there, unify the two code paths. Then improve the resulting code: * Rebind had nested listen attempts to try the user-specified port first, and then fall back to :0 if that failed. Convert that into a loop. * Initial bind tried only the user-specified port. Rebind tried the user-specified port and 0. But there are actually three ports of interest: The one the user specified, the most recent port in use, and 0. We now try all three in order, as appropriate. * In the extremely rare case in which binding to port 0 fails, use a dummy net.PacketConn whose reads block until close. This will keep the wireguard-go receive func goroutine alive. As a pleasant side-effect of this, if we decide that we need to resuscitate #1796, it will now be much easier. Fixes #1799 Co-authored-by: David Anderson <danderson@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	8fb66e20a4	wgengine/magicsock: remove DefaultPort const Assume it'll stay at 0 forever, so hard-code it and delete code conditional on it being non-0. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Brad Fitzpatrick	1e6d512bf0	cmd/tailscale: improve file cp error message in macOS GUI version Fixes tailscale/corp#1684 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	8554694616	cmd/tailscale: add 'tailscale file get' subcommand Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	cafa037de0	cmd/tailscale/cli: rename 'tailscale push' to 'tailscale file cp' And reverse order, require final colon, and support multiple files. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Ross Zurowski	b062ac5e86	cmd/tailscale: fix typo in error message (#1807 ) Signed-off-by: Ross Zurowski <ross@rosszurowski.com>	4 years ago
Brad Fitzpatrick	5ecc7c7200	cmd/tailscale: make the new 'up' errors prettier and more helpful Fixes #1746 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	ffe6c8e335	cmd/tailscale/cli: don't do a simple up when in state NeedsLogin Fixes #1780 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	25ce9885a2	net/dns: don't use NM+resolved for NM >=1.26.6. NetworkManager fixed the bug that forced us to use NetworkManager if it's programming systemd-resolved, and in the same release also made NetworkManager ignore DNS settings provided for unmanaged interfaces... Which breaks what we used to do. So, with versions 1.26.6 and above, we MUST NOT use NetworkManager to indirectly program systemd-resolved, but thankfully we can talk to resolved directly and get the right outcome. Fixes #1788 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Aleksandar Pesic	7c985e4944	ipn/ipnlocal: add file sharing to windows shell Updates: tailscale/winmin#33 Signed-off-by: Aleksandar Pesic <peske.nis@gmail.com>	4 years ago
Brad Fitzpatrick	d94ed7310b	cmd/tailscale/cli: add test for already-submitted #1777 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	30629c430a	cmd/tailscale/cli: don't force an interactive login on --reset. Fixes #1778 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago

1 2 3 4 5 ...

464 Commits (e7164425b316b447e0c6d4fa4a6df57404fe8369)