tailscale

Commit Graph

Author	SHA1	Message	Date
Irbe Krumina	9bd158cc09	cmd/containerboot,util/linuxfw: create a SNAT rule for dst/src only once, clean up if needed (#13658 ) The AddSNATRuleForDst rule was adding a new rule each time it was called including: - if a rule already existed - if a rule matching the destination, but with different desired source already existed This was causing issues especially for the in-progress egress HA proxies work, where the rules are now refreshed more frequently, so more redundant rules were being created. This change: - only creates the rule if it doesn't already exist - if a rule for the same dst, but different source is found, delete it - also ensures that egress proxies refresh firewall rules if the node's tailnet IP changes Updates tailscale/tailscale#13406 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	2 months ago
Irbe Krumina	096b090caf	cmd/containerboot,kube,util/linuxfw: configure kube egress proxies to route to 1+ tailnet targets (#13531 ) * cmd/containerboot,kube,util/linuxfw: configure kube egress proxies to route to 1+ tailnet targets This commit is first part of the work to allow running multiple replicas of the Kubernetes operator egress proxies per tailnet service + to allow exposing multiple tailnet services via each proxy replica. This expands the existing iptables/nftables-based proxy configuration mechanism. A proxy can now be configured to route to one or more tailnet targets via a (mounted) config file that, for each tailnet target, specifies: - the target's tailnet IP or FQDN - mappings of container ports to which cluster workloads will send traffic to tailnet target ports where the traffic should be forwarded. Example configfile contents: { "some-svc": {"tailnetTarget":{"fqdn":"foo.tailnetxyz.ts.net","ports"{"tcp:4006:80":{"protocol":"tcp","matchPort":4006,"targetPort":80},"tcp:4007:443":{"protocol":"tcp","matchPort":4007,"targetPort":443}}}} } A proxy that is configured with this config file will configure firewall rules to route cluster traffic to the tailnet targets. It will then watch the config file for updates as well as monitor relevant netmap updates and reconfigure firewall as needed. This adds a bunch of new iptables/nftables functionality to make it easier to dynamically update the firewall rules without needing to restart the proxy Pod as well as to make it easier to debug/understand the rules: - for iptables, each portmapping is a DNAT rule with a comment pointing at the 'service',i.e: -A PREROUTING ! -i tailscale0 -p tcp -m tcp --dport 4006 -m comment --comment "some-svc:tcp:4006 -> tcp:80" -j DNAT --to-destination 100.64.1.18:80 Additionally there is a SNAT rule for each tailnet target, to mask the source address. - for nftables, a separate prerouting chain is created for each tailnet target and all the portmapping rules are placed in that chain. This makes it easier to look up rules and delete services when no longer needed. (nftables allows hooking a custom chain to a prerouting hook, so no extra work is needed to ensure that the rules in the service chains are evaluated). The next steps will be to get the Kubernetes Operator to generate the configfile and ensure it is mounted to the relevant proxy nodes. Updates tailscale/tailscale#13406 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	2 months ago
Brad Fitzpatrick	909a292a8d	util/linuxfw: don't try cleaning iptables on gokrazy It just generates log spam. Updates #12277 Change-Id: I5f65c0859e86de0a5349f9d26c9805e7c26b9371 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Irbe Krumina	7ef2f72135	util/linuxfw: fix IPv6 availability check for nftables (#12009 ) * util/linuxfw: fix IPv6 NAT availability check for nftables When running firewall in nftables mode, there is no need for a separate NAT availability check (unlike with iptables, there are no hosts that support nftables, but not IPv6 NAT - see tailscale/tailscale#11353). This change fixes a firewall NAT availability check that was using the no-longer set ipv6NATAvailable field by removing the field and using a method that, for nftables, just checks that IPv6 is available. Updates tailscale/tailscale#12008 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Andrew Lytvynov	c28f5767bf	various: implement stateful firewalling on Linux (#12025 ) Updates https://github.com/tailscale/corp/issues/19623 Change-Id: I7980e1fb736e234e66fa000d488066466c96ec85 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Co-authored-by: Andrew Dunham <andrew@du.nham.ca>	7 months ago
Irbe Krumina	add62af7c6	util/linuxfw,go.{mod,sum}: don't log errors when deleting non-existant chains and rules (#11852 ) This PR bumps iptables to a newer version that has a function to detect 'NotExists' errors and uses that function to determine whether errors received on iptables rule and chain clean up are because the rule/chain does not exist- if so don't log the error. Updates corp#19336 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	3af0f526b8	cmd{containerboot,k8s-operator},util/linuxfw: support ExternalName Services (#11802 ) * cmd/containerboot,util/linuxfw: support proxy backends specified by DNS name Adds support for optionally configuring containerboot to proxy traffic to backends configured by passing TS_EXPERIMENTAL_DEST_DNS_NAME env var to containerboot. Containerboot will periodically (every 10 minutes) attempt to resolve the DNS name and ensure that all traffic sent to the node's tailnet IP gets forwarded to the resolved backend IP addresses. Currently: - if the firewall mode is iptables, traffic will be load balanced accross the backend IP addresses using round robin. There are no health checks for whether the IPs are reachable. - if the firewall mode is nftables traffic will only be forwarded to the first IP address in the list. This is to be improved. * cmd/k8s-operator: support ExternalName Services Adds support for exposing endpoints, accessible from within a cluster to the tailnet via DNS names using ExternalName Services. This can be done by annotating the ExternalName Service with tailscale.com/expose: "true" annotation. The operator will deploy a proxy configured to route tailnet traffic to the backend IPs that service.spec.externalName resolves to. The backend IPs must be reachable from the operator's namespace. Updates tailscale/tailscale#10606 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
James Tucker	db760d0bac	cmd/tailscaled: move cleanup to an implicit action during startup This removes a potentially increased boot delay for certain boot topologies where they block on ExecStartPre that may have socket activation dependencies on other system services (such as systemd-resolved and NetworkManager). Also rename cleanup to clean up in affected/immediately nearby places per code review commentary. Fixes #11599 Signed-off-by: James Tucker <james@tailscale.com>	8 months ago
Irbe Krumina	5fb721d4ad	util/linuxfw,wgengine/router: skip IPv6 firewall configuration in partial iptables mode (#11546 ) We have hosts that support IPv6, but not IPv6 firewall configuration in iptables mode. We also have hosts that have some support for IPv6 firewall configuration in iptables mode, but do not have iptables filter table. We should: - configure ip rules for all hosts that support IPv6 - only configure firewall rules in iptables mode if the host has iptables filter table. Updates tailscale/tailscale#11540 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
James Tucker	3f7313dbdb	util/linuxfw,wgengine/router: enable IPv6 configuration when netfilter is disabled Updates #11434 Signed-off-by: James Tucker <james@tailscale.com>	8 months ago
James Tucker	055117ad45	util/linuxfw: fix support for containers without IPv6 iptables filters (#11381 ) There are container environments such as GitHub codespaces that have partial IPv6 support - routing support is enabled at the kernel level, but lacking IPv6 filter support in the iptables module. In the specific example of the codespaces environment, this also has pre-existing legacy iptables rules in the IPv4 tables, as such the nascent firewall mode detection will always pick iptables. We would previously fault trying to install rules to the filter table, this catches that condition earlier, and disables IPv6 support under these conditions. Updates #5621 Updates #11344 Updates #11354 Signed-off-by: James Tucker <james@tailscale.com>	9 months ago
James Tucker	43fba6e04d	util/linuxfw: correct logical error in NAT table check (#11380 ) Updates #11344 Updates #11354 Signed-off-by: James Tucker <james@tailscale.com>	9 months ago
Irbe Krumina	90c4067010	util/linuxfw: add container-friendly IPv6 NAT check (#11353 ) Remove IPv6 NAT check when routing is being set up using nftables. This is unnecessary as support for nftables was added after support for IPv6. https://tldp.org/HOWTO/Linux+IPv6-HOWTO/ch18s04.html https://wiki.nftables.org/wiki-nftables/index.php/Building_and_installing_nftables_from_sources Additionally, run an extra check for IPv6 NAT support when the routing is set up with iptables. This is because the earlier checks rely on being able to use modprobe and on /proc/net/ip6_tables_names being populated on start - these conditions are usually not true in container environments. Updates tailscale/tailscale#11344 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Naman Sood	d46a4eced5	util/linuxfw, wgengine: allow ingress to magicsock UDP port on Linux (#10370 ) * util/linuxfw, wgengine: allow ingress to magicsock UDP port on Linux Updates #9084. Currently, we have to tell users to manually open UDP ports on Linux when certain firewalls (like ufw) are enabled. This change automates the process of adding and updating those firewall rules as magicsock changes what port it listens on. Signed-off-by: Naman Sood <mail@nsood.in>	12 months ago
Maisem Ali	fbfee6a8c0	cmd/containerboot: use linuxfw.NetfilterRunner This migrates containerboot to reuse the NetfilterRunner used by tailscaled instead of manipulating iptables rule itself. This has the added advantage of now working with nftables and we can potentially drop the `iptables` command from the container image in the future. Updates #9310 Co-authored-by: Irbe Krumina <irbe@tailscale.com> Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	05a1f5bf71	util/linuxfw: move detection logic Just a refactor to consolidate the firewall detection logic in a single package so that it can be reused in a later commit by containerboot. Updates #9310 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
James Tucker	ba6ec42f6d	util/linuxfw: add missing input rule to the tailscale tun Add an explicit accept rule for input to the tun interface, as a mirror to the explicit rule to accept output from the tun interface. The rule matches any packet in to our tun interface and accepts it, and the rule is positioned and prioritized such that it should be evaluated prior to conventional ufw/iptables/nft rules. Updates #391 Fixes #7332 Updates #9084 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
KevinLiang10	a3c7b21cd1	util/linuxfw: add nftables support This commit adds nftable rule injection for tailscaled. If tailscaled is started with envknob TS_DEBUG_USE_NETLINK_NFTABLES = true, the router will use nftables to manage firewall rules. Updates: #391 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
KevinLiang10	243ce6ccc1	util/linuxfw: decoupling IPTables logic from linux router This change is introducing new netfilterRunner interface and moving iptables manipulation to a lower leveled iptables runner. For #391 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago

19 Commits (e38522c081ff48add7db73077e7be18f38ea709d)