126 Commits (dcb0f189cc774e23b149d283fa16233217e754cf)

Author	SHA1	Message	Date
Tom Proctor	3099323976	cmd/k8s-operator,k8s-operator,go.{mod,sum}: publish proxy status condition for annotated services (#12463) ... Adds a new TailscaleProxyReady condition type for use in corev1.Service conditions. Also switch our CRDs to use metav1.Condition instead of ConnectorCondition. The Go structs are seralized identically, but it updates some descriptions and validation rules. Update k8s controller-tools and controller-runtime deps to fix the documentation generation for metav1.Condition so that it excludes comments and TODOs. Stop expecting the fake client to populate TypeMeta in tests. See kubernetes-sigs/controller-runtime#2633 for details of the change. Finally, make some minor improvements to validation for service hostnames. Fixes #12216 Co-authored-by: Irbe Krumina <irbe@tailscale.com> Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>	5 months ago
Irbe Krumina	8cc2738609	cmd/{containerboot,k8s-operator}: store proxy device ID early to help with cleanup for broken proxies (#12425) ... * cmd/containerboot: store device ID before setting up proxy routes. For containerboot instances whose state needs to be stored in a Kubernetes Secret, we additonally store the device's ID, FQDN and IPs. This is used, between other, by the Kubernetes operator, who uses the ID to delete the device when resources need cleaning up and writes the FQDN and IPs on various kube resource statuses for visibility. This change shifts storing device ID earlier in the proxy setup flow, to ensure that if proxy routing setup fails, the device can still be deleted. Updates tailscale/tailscale#12146 Signed-off-by: Irbe Krumina <irbe@tailscale.com> * code review feedback Signed-off-by: Irbe Krumina <irbe@tailscale.com> --------- Signed-off-by: Irbe Krumina <irbe@tailscale.com>	5 months ago
JunYanBJSS	4c01ce9f43	tsnet: fix error formatting bug ... Fixes #12411 Signed-off-by: JunYanBJSS <johnnycocoyan@hotmail.com>	5 months ago
Irbe Krumina	c3e2b7347b	tailcfg,cmd/k8s-operator,kube: move Kubernetes cap to a location that can be shared with control (#12236) ... This PR is in prep of adding logic to control to be able to parse tailscale.com/cap/kubernetes grants in control: - moves the type definition of PeerCapabilityKubernetes cap to a location shared with control. - update the Kubernetes cap rule definition with fields for granting kubectl exec session recording capabilities. - adds a convenience function to produce tailcfg.RawMessage from an arbitrary cap rule and a test for it. An example grant defined via ACLs: "grants": [{ "src": ["tag:eng"], "dst": ["tag:k8s-operator"], "app": { "tailscale.com/cap/kubernetes": [{ "recorder": ["tag:my-recorder"] “enforceRecorder”: true }], }, } ] This grant enforces `kubectl exec` sessions from tailnet clients, matching `tag:eng` via API server proxy matching `tag:k8s-operator` to be recorded and recording to be sent to a tsrecorder instance, matching `tag:my-recorder`. The type needs to be shared with control because we want control to parse this cap and resolve tags to peer IPs. Updates tailscale/corp#19821 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	5 months ago
Irbe Krumina	807934f00c	cmd/k8s-operator,k8s-operator: allow proxies accept advertized routes. (#12388) ... Add a new .spec.tailscale.acceptRoutes field to ProxyClass, that can be optionally set to true for the proxies to accept routes advertized by other nodes on tailnet (equivalent of setting --accept-routes to true). Updates tailscale/tailscale#12322,tailscale/tailscale#10684 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	5 months ago
Irbe Krumina	53d9cac196	k8s-operator/apis/v1alpha1,cmd/k8s-operator/deploy/examples: update DNSConfig description (#11971) ... Also removes hardcoded image repo/tag from example DNSConfig resource as the operator now knows how to default those. Updates tailscale/tailscale#11019 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	5 months ago
Tom Proctor	23e26e589f	cmd/k8s-operator,k8s-opeerator: include Connector's MagicDNS name and tailnet IPs in status (#12359) ... Add new fields TailnetIPs and Hostname to Connector Status. These contain the addresses of the Tailscale node that the operator created for the Connector to aid debugging. Fixes #12214 Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>	5 months ago
Irbe Krumina	3a6d3f1a5b	cmd/k8s-operator,k8s-operator,go.{mod,sum}: make individual proxy images/image pull policies configurable (#11928) ... cmd/k8s-operator,k8s-operator,go.{mod,sum}: make individual proxy images/image pull policies configurable Allow to configure images and image pull policies for individual proxies via ProxyClass.Spec.StatefulSet.Pod.{TailscaleContainer,TailscaleInitContainer}.Image, and ProxyClass.Spec.StatefulSet.Pod.{TailscaleContainer,TailscaleInitContainer}.ImagePullPolicy fields. Document that we have images in ghcr.io on the relevant Helm chart fields. Updates tailscale/tailscale#11675 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	5 months ago
Andrew Dunham	e88a5dbc92	various: fix lint warnings ... Some lint warnings caught by running 'make lint' locally. Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I1534ed6f2f5e1eb029658906f9d62607dad98ca3	5 months ago
Irbe Krumina	82576190a7	tailcfg,cmd/k8s-operator: moves tailscale.com/cap/kubernetes peer cap to tailcfg (#12235) ... This is done in preparation for adding kubectl session recording rules to this capability grant that will need to be unmarshalled by control, so will also need to be in a shared location. Updates tailscale/corp#19821 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	5 months ago
signed-long	1dc3136a24	cmd/k8s-operator: Support image 'repo' or 'repository' keys in helm values file (#12285) ... cmd/k8s-operator/deploy/chart: Support image 'repo' or 'repository' keys in helm values Fixes #12100 Signed-off-by: Michael Long <michaelongdev@gmail.com>	5 months ago
signed-long	5ad0dad15e	go generate directives reorder for 'make kube-generate-all' (#12210) ... Fixes #11980 Signed-off-by: Michael Long <michaelongdev@gmail.com>	6 months ago
Irbe Krumina	d0d33f257f	cmd/k8s-operator: add a note pointing at ProxyClass (#12246) ... Updates tailscale/tailscale#12242 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Irbe Krumina	72f0f53ed0	cmd/k8s-operator: fix typo (#12217) ... Fixes#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Irbe Krumina	d86d1e7601	cmd/k8s-operator,cmd/containerboot,ipn,k8s-operator: turn off stateful filter for egress proxies. (#12075) ... Turn off stateful filtering for egress proxies to allow cluster traffic to be forwarded to tailnet. Allow configuring stateful filter via tailscaled config file. Deprecate EXPERIMENTAL_TS_CONFIGFILE_PATH env var and introduce a new TS_EXPERIMENTAL_VERSIONED_CONFIG env var that can be used to provide containerboot a directory that should contain one or more tailscaled config files named cap-<tailscaled-cap-version>.hujson. Containerboot will pick the one with the newest capability version that is not newer than its current capability version. Proxies with this change will not work with older Tailscale Kubernetes operator versions - users must ensure that the deployed operator is at the same version or newer (up to 4 version skew) than the proxies. Updates tailscale/tailscale#12061 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Irbe Krumina	b5dbf155b1	cmd/k8s-operator: default nameserver image to tailscale/k8s-nameserver:unstable (#11991) ... We are now publishing nameserver images to tailscale/k8s-nameserver, so we can start defaulting the images if users haven't set them explicitly, same as we already do with proxy images. The nameserver images are currently only published for unstable track, so we have to use the static 'unstable' tag. Once we start publishing to stable, we can make the operator default to its own tag (because then we'll know that for each operator tag X there is also a nameserver tag X as we always cut all images for a given tag. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Irbe Krumina	406293682c	cmd/k8s-operator: cleanup runReconciler signature (#11993) ... Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Irbe Krumina	cd633a7252	cmd/k8s-operator/deploy,k8s-operator: document that metrics are unstable (#11979) ... Updates#11292 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Irbe Krumina	19b31ac9a6	cmd/{k8s-operator,k8s-nameserver},k8s-operator: update nameserver config with records for ingress/egress proxies (#11019) ... cmd/k8s-operator: optionally update dnsrecords Configmap with DNS records for proxies. This commit adds functionality to automatically populate DNS records for the in-cluster ts.net nameserver to allow cluster workloads to resolve MagicDNS names associated with operator's proxies. The records are created as follows: * For tailscale Ingress proxies there will be a record mapping the MagicDNS name of the Ingress device and each proxy Pod's IP address. * For cluster egress proxies, configured via tailscale.com/tailnet-fqdn annotation, there will be a record for each proxy Pod, mapping the MagicDNS name of the exposed tailnet workload to the proxy Pod's IP. No records will be created for any other proxy types. Records will only be created if users have configured the operator to deploy an in-cluster ts.net nameserver by applying tailscale.com/v1alpha1.DNSConfig. It is user's responsibility to add the ts.net nameserver as a stub nameserver for ts.net DNS names. https://kubernetes.io/docs/tasks/administer-cluster/dns-custom-nameservers/#configuration-of-stub-domain-and-upstream-nameserver-using-coredns https://cloud.google.com/kubernetes-engine/docs/how-to/kube-dns#upstream_nameservers See also https://github.com/tailscale/tailscale/pull/11017 Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Gabe Gorelick	de85610be0	cmd/k8s-operator/deploy/chart: allow users to configure additional labels for the operator's Pod via Helm chart values. ... cmd/k8s-operator/deploy/chart: allow users to configure additional labels for the operator's Pod via Helm chart values. Fixes #11947 Signed-off-by: Gabe Gorelick <gabe@hightouch.io>	7 months ago
Irbe Krumina	44aa809cb0	cmd/{k8s-nameserver,k8s-operator},k8s-operator: add a kube nameserver, make operator deploy it (#11919) ... * cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster. Adds a simple nameserver that can respond to A record queries for ts.net DNS names. It can respond to queries from in-memory records, populated from a ConfigMap mounted at /config. It dynamically updates its records as the ConfigMap contents changes. It will respond with NXDOMAIN to queries for any other record types (AAAA to be implemented in the future). It can respond to queries over UDP or TCP. It runs a miekg/dns DNS server with a single registered handler for ts.net domain names. Queries for other domain names will be refused. The intended use of this is: 1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet services exposed via Tailscale operator egress over HTTPS 2) to allow non-tailnet cluster workloads to talk to workloads in the same cluster that have been exposed to tailnet over their MagicDNS names but on their cluster IPs. DNSConfig CRD can be used to configure the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	7d9c3f9897	cmd/k8s-operator/deploy/manifests: check if IPv6 module is loaded before using it (#11867) ... Before attempting to enable IPv6 forwarding in the proxy init container check if the relevant module is found, else the container crashes on hosts that don't have it. Updates#11860 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	df8f40905b	cmd/k8s-operator,k8s-operator: optionally serve tailscaled metrics on Pod IP (#11699) ... Adds a new .spec.metrics field to ProxyClass to allow users to optionally serve client metrics (tailscaled --debug) on <Pod-IP>:9001. Metrics cannot currently be enabled for proxies that egress traffic to tailnet and for Ingress proxies with tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation (because they currently forward all cluster traffic to their respective backends). The assumption is that users will want to have these metrics enabled continuously to be able to monitor proxy behaviour (as opposed to enabling them temporarily for debugging). Hence we expose them on Pod IP to make it easier to consume them i.e via Prometheus PodMonitor. Updates tailscale/tailscale#11292 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Lee Briggs	14ac41febc	cmd/k8s-operator,k8s-operator: proxyclass affinity (#11862) ... add ability to set affinity rules to proxyclass Updates#11861 Signed-off-by: Lee Briggs <lee@leebriggs.co.uk>	7 months ago
Irbe Krumina	3af0f526b8	cmd{containerboot,k8s-operator},util/linuxfw: support ExternalName Services (#11802) ... * cmd/containerboot,util/linuxfw: support proxy backends specified by DNS name Adds support for optionally configuring containerboot to proxy traffic to backends configured by passing TS_EXPERIMENTAL_DEST_DNS_NAME env var to containerboot. Containerboot will periodically (every 10 minutes) attempt to resolve the DNS name and ensure that all traffic sent to the node's tailnet IP gets forwarded to the resolved backend IP addresses. Currently: - if the firewall mode is iptables, traffic will be load balanced accross the backend IP addresses using round robin. There are no health checks for whether the IPs are reachable. - if the firewall mode is nftables traffic will only be forwarded to the first IP address in the list. This is to be improved. * cmd/k8s-operator: support ExternalName Services Adds support for exposing endpoints, accessible from within a cluster to the tailnet via DNS names using ExternalName Services. This can be done by annotating the ExternalName Service with tailscale.com/expose: "true" annotation. The operator will deploy a proxy configured to route tailnet traffic to the backend IPs that service.spec.externalName resolves to. The backend IPs must be reachable from the operator's namespace. Updates tailscale/tailscale#10606 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	bbe194c80d	cmd/k8s-operator: correctly determine cluster domain (#11512) ... Kubernetes cluster domain defaults to 'cluster.local', but can also be customized. We need to determine cluster domain to set up in-cluster forwarding to our egress proxies. This was previously hardcoded to 'cluster.local', so was the egress proxies were not usable in clusters with custom domains. This PR ensures that we attempt to determine the cluster domain by parsing /etc/resolv.conf. In case the cluster domain cannot be determined from /etc/resolv.conf, we fall back to 'cluster.local'. Updates tailscale/tailscale#10399,tailscale/tailscale#11445 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Brad Fitzpatrick	7c1d6e35a5	all: use Go 1.22 range-over-int ... Updates #11058 Change-Id: I35e7ef9b90e83cac04ca93fd964ad00ed5b48430 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Irbe Krumina	26f9bbc02b	cmd/k8s-operator,k8s-operator: document tailscale.com Custom Resource Definitions better. (#11665) ... Updates tailscale/tailscale#10880 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	38fb23f120	cmd/k8s-operator,k8s-operator: allow users to configure proxy env vars via ProxyClass (#11743) ... Adds new ProxyClass.spec.statefulSet.pod.{tailscaleContainer,tailscaleInitContainer}.Env field that allow users to provide key, value pairs that will be set as env vars for the respective containers. Allow overriding all containerboot env vars, but warn that this is not supported and might break (in docs + a warning when validating ProxyClass). Updates tailscale/tailscale#10709 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	231e44e742	Revert "cmd/{k8s-nameserver,k8s-operator},k8s-operator: add a kube nameserver, make operator deploy it (#11017)" (#11669) ... Temporarily reverting this PR to avoid releasing half finished featue. This reverts commit 9e2f58f846. Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	9b5176c4d9	cmd/k8s-operator: fix failing tests (#11541) ... Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Irbe Krumina	9e2f58f846	cmd/{k8s-nameserver,k8s-operator},k8s-operator: add a kube nameserver, make operator deploy it (#11017) ... * cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster. Adds a simple nameserver that can respond to A record queries for ts.net DNS names. It can respond to queries from in-memory records, populated from a ConfigMap mounted at /config. It dynamically updates its records as the ConfigMap contents changes. It will respond with NXDOMAIN to queries for any other record types (AAAA to be implemented in the future). It can respond to queries over UDP or TCP. It runs a miekg/dns DNS server with a single registered handler for ts.net domain names. Queries for other domain names will be refused. The intended use of this is: 1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet services exposed via Tailscale operator egress over HTTPS 2) to allow non-tailnet cluster workloads to talk to workloads in the same cluster that have been exposed to tailnet over their MagicDNS names but on their cluster IPs. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com> * cmd/k8s-operator/deploy/crds,k8s-operator: add DNSConfig CustomResource Definition DNSConfig CRD can be used to configure the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster. Signed-off-by: Irbe Krumina <irbe@tailscale.com> * cmd/k8s-operator,k8s-operator: optionally reconcile nameserver resources Adds a new reconciler that reconciles DNSConfig resources. If a DNSConfig is deployed to cluster, the reconciler creates kube nameserver resources. This reconciler is only responsible for creating nameserver resources and not for populating nameserver's records. Signed-off-by: Irbe Krumina <irbe@tailscale.com> * cmd/{k8s-operator,k8s-nameserver}: generate DNSConfig CRD for charts, append to static manifests Signed-off-by: Irbe Krumina <irbe@tailscale.com> --------- Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Irbe Krumina	4cbef20569	cmd/k8s-operator: redact auth key from debug logs (#11523) ... Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Chris Milson-Tokunaga	b6dfd7443a	Change type of installCRDs (#11478) ... Including the double quotes (`"`) around the value made it appear like the helm chart should expect a string value for `installCRDs`. Signed-off-by: Chris Milson-Tokunaga <chris.w.milson@gmail.com>	8 months ago
Irbe Krumina	b0c3e6f6c5	cmd/k8s-operator,ipn/conf.go: fix --accept-routes for proxies (#11453) ... Fix a bug where all proxies got configured with --accept-routes set to true. The bug was introduced in https://github.com/tailscale/tailscale/pull/11238. Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Irbe Krumina	95dcc1745b	cmd/k8s-operator: reconcile tailscale Ingresses when their backend Services change. (#11255) ... This is so that if a backend Service gets created after the Ingress, it gets picked up by the operator. Updates tailscale/tailscale#11251 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Anton Tolchanov <1687799+knyar@users.noreply.github.com>	9 months ago
Irbe Krumina	303125d96d	cmd/k8s-operator: configure all proxies with declarative config (#11238) ... Containerboot container created for operator's ingress and egress proxies are now always configured by passing a configfile to tailscaled (tailscaled --config <configfile-path>. It does not run 'tailscale set' or 'tailscale up'. Upgrading existing setups to this version as well as downgrading existing setups at this version works. Updates tailscale/tailscale#10869 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Irbe Krumina	45d27fafd6	cmd/k8s-operator,k8s-operator,go.{mod,sum},tstest/tools: add Tailscale Kubernetes operator API docs (#11246) ... Add logic to autogenerate CRD docs. .github/workflows/kubemanifests.yaml CI workflow will fail if the doc is out of date with regard to the current CRDs. Docs can be refreshed by running make kube-generate-all. Updates tailscale/tailscale#11023 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Irbe Krumina	5bd19fd3e3	cmd/k8s-operator,k8s-operator: proxy configuration mechanism via a new ProxyClass custom resource (#11074) ... * cmd/k8s-operator,k8s-operator: introduce proxy configuration mechanism via ProxyClass custom resource. ProxyClass custom resource can be used to specify customizations for the proxy resources created by the operator. Add a reconciler that validates ProxyClass resources and sets a Ready condition to True or False with a corresponding reason and message. This is required because some fields (labels and annotations) require complex validations that cannot be performed at custom resource apply time. Reconcilers that use the ProxyClass to configure proxy resources are expected to verify that the ProxyClass is Ready and not proceed with resource creation if configuration from a ProxyClass that is not yet Ready is required. If a tailscale ingress/egress Service is annotated with a tailscale.com/proxy-class annotation, look up the corresponding ProxyClass and, if it is Ready, apply the configuration from the ProxyClass to the proxy's StatefulSet. If a tailscale Ingress has a tailscale.com/proxy-class annotation and the referenced ProxyClass custom resource is available and Ready, apply configuration from the ProxyClass to the proxy resources that will be created for the Ingress. Add a new .proxyClass field to the Connector spec. If connector.spec.proxyClass is set to a ProxyClass that is available and Ready, apply configuration from the ProxyClass to the proxy resources created for the Connector. Ensure that when Helm chart is packaged, the ProxyClass yaml is added to chart templates. Ensure that static manifest generator adds ProxyClass yaml to operator.yaml. Regenerate operator.yaml Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Irbe Krumina	a6cc2fdc3e	cmd/{containerboot,k8s-operator/deploy/manifests}: optionally allow proxying cluster traffic to a cluster target via ingress proxy (#11036) ... * cmd/containerboot,cmd/k8s-operator/deploy/manifests: optionally forward cluster traffic via ingress proxy. If a tailscale Ingress has tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation, configure the associated ingress proxy to have its tailscale serve proxy to listen on Pod's IP address. This ensures that cluster traffic too can be forwarded via this proxy to the ingress backend(s). In containerboot, if EXPERIMENTAL_PROXY_CLUSTER_TRAFFIC_VIA_INGRESS is set to true and the node is Kubernetes operator ingress proxy configured via Ingress, make sure that traffic from within the cluster can be proxied to the ingress target. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Irbe Krumina	370ec6b46b	cmd/k8s-operator: don't proceed with Ingress that has no valid backends (#10919) ... Do not provision resources for a tailscale Ingress that has no valid backends. Updates tailscale/tailscale#10910 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
ChandonPierre	2ce596ea7a	cmd/k8s-operator/deploy: allow modifying operator tags via Helm values ... Updates tailscale/tailscale#10659 Signed-off-by: Chandon Pierre <cpierre@coreweave.com>	10 months ago
Joe Tsai	c25968e1c5	all: make use of ctxkey everywhere (#10846) ... Also perform minor cleanups on the ctxkey package itself. Provide guidance on when to use ctxkey.Key[T] over ctxkey.New. Also, allow for interface kinds because the value wrapping trick also happens to fix edge cases with interfaces in Go. Updates #cleanup Signed-off-by: Joe Tsai <joetsai@digital-static.net>	10 months ago
Irbe Krumina	1c3c3d6752	cmd/k8s-operator: warn if unsupported Ingress Exact path type is used. (#10865) ... To reduce the likelihood of breaking users, if we implement stricter Exact path type matching in the future. Updates tailscale/tailscale#10730 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Irbe Krumina	50b52dbd7d	cmd/k8s-operator: sync StatefulSet labels to their Pods (#10861) ... So that users have predictable label values to use when configuring network policies. Updates tailscale/tailscale#10854 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Irbe Krumina	d0492fdee5	cmd/k8s-operator: adds a tailscale IngressClass resource, prints warning if class not found. (#10823) ... * cmd/k8s-operator/deploy: deploy a Tailscale IngressClass resource. Some Ingress validating webhooks reject Ingresses with .spec.ingressClassName for which there is no matching IngressClass. Additionally, validate that the expected IngressClass is present, when parsing a tailscale `Ingress`. We currently do not utilize the IngressClass, however we might in the future at which point we might start requiring that the right class for this controller instance actually exists. Updates tailscale/tailscale#10820 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Anton Tolchanov <anton@tailscale.com>	10 months ago
Irbe Krumina	169778e23b	cmd/k8s-operator: minor fix in name gen (#10830) ... Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Irbe Krumina	5cc1bfe82d	cmd/k8s-operator: remove configuration knob for Connector (#10791) ... The configuration knob (that defaulted to Connector being disabled) was added largely because the Connector CRD had to be installed in a separate step. Now when the CRD has been added to both chart and static manifest, we can have it on by default. Updates tailscale/tailscale#10878 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Irbe Krumina	469af614b0	cmd/k8s-operator: fix base truncating for extra long Service names (#10825) ... cmd/k8s-operator: fix base truncating for extra long Service names StatefulSet names for ingress/egress proxies are calculated using Kubernetes name generator and the parent resource name as a base. The name generator also cuts the base, but has a higher max cap. This commit fixes a bug where, if we get a shortened base back from the generator, we cut off too little as the base that we have cut will be passed into the generator again, which will then itself cut less because the base is shorter- so we end up with a too long name again. Updates tailscale/tailscale#10807 Co-authored-by: Maisem Ali <maisem@tailscale.com> Signed-off-by: Irbe Krumina <irbekrm@gmail.com>	10 months ago
Irbe Krumina	35f49ac99e	cmd/k8s-operator: add Connector CRD to Helm chart and static manifests (#10775) ... cmd/k8s-operator: add CRD to chart and static manifest Add functionality to insert CRD to chart at package time. Insert CRD to static manifests as this is where they are currently consumed from. Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago