tailscale

Commit Graph

Author	SHA1	Message	Date
Maisem Ali	0842e2f45b	ipn/store: add ability to store data as k8s secrets. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	7f29dcaac1	cmd/tailscale/cli: make up block until state Running, not just Starting At "Starting", the DERP connection isn't yet up. After the first netmap and DERP connect, then it transitions into "Running". Fixes #2708 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7a7aa8f2b0	cmd/derper: also add port 80 timeouts Didn't notice this one in earlier `00b3c1c042` Updates tailscale/corp#2486 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	3c8ca4b357	client/tailscale, cmd/tailscale/cli: move version mismatch check to CLI So people can use the package for whois checks etc without version skew errors. The earlier change `faa891c1f2` for #1905 was a bit too aggressive. Fixes #2757 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	21cb0b361f	safesocket: add connect retry loop to wait for tailscaled Updates #2708 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	00b3c1c042	cmd/derper: add missing read/write timeouts Updates tailscale/corp#2486 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	97693f2e42	wgengine/magicsock: delete legacy AddrSet endpoints. Instead of using the legacy codepath, teach discoEndpoint to handle peers that have a home DERP, but no disco key. We can still communicate with them, but only over DERP. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Maisem Ali	fd4838dc57	wgengine/userspace: add support to automatically enable/disable the tailscale protocol in BIRD, when the node is a primary subnet router as determined by control. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Will Lachance	a35c3ba221	cmd/tailscale: fix truncated characters in web controller (#2722 ) Fixes #2204 Signed-off-by: William Lachance <wlach@protonmail.com> Co-authored-by: William Lachance <wlach@protonmail.com> Co-authored-by: Ross Zurowski <ross@rosszurowski.com>	3 years ago
Brad Fitzpatrick	4aab083cae	cmd/tailscaled: add debug flag to print interfaces just once It previously only had a polling monitor mode. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	47045265b9	hostinfo: add SetDeviceModel setter, move remaining code from controlclient Updates tailscale/corp#1959 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	4ff0757d44	cmd/testcontrol: add test control server This is useful for manual performance testing of networks with many nodes. I imagine it'll grow more knobs over time. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	edb338f542	cmd/tailscale: fix sporadic 'context canceled' error on 'up' Fixes #2333 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	9f62cc665e	tailscaled: try migrating old state on synology devices Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	b7ae529ecc	client/tailscale: make GetCertificate guess cert if SNI lacks dots Updates #1235 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d5e1abd0c4	cmd/tailscale/cli: only write cert file if it changed Updates #1235 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	57b794c338	ipn/localapi: move cert fetching code to localapi, cache, add cert subcommand Updates #1235 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Matt Layher	8ab44b339e	net/tstun: use unix.Ifreq type for Linux TAP interface configuration Signed-off-by: Matt Layher <mdlayher@gmail.com>	3 years ago
Josh Bleecher Snyder	d2aa144dcc	syncs: bump known good version to include Go 1.17 Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	25e060a841	cmd/tailscale/cli: fix cert fetch WaitOrder retry loop, misc cleanups Updates #1235 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	b2eea1ee00	cmd/tailscale/cli: make cert fetch registration automatic, show valid domains Updates #1235 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Denton Gentry	3e7ff5ff98	cmd/tailscaled: enable hybrid netstack mode for FreeBSD. Allows FreeBSD to function as an exit node in the same way that Windows and Tailscaled-on-MacOS do. RELNOTE=FreeBSD can now function as an exit node. Fixes https://github.com/tailscale/tailscale/issues/2498 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Brad Fitzpatrick	ec9f3f4cc0	cmd/tailscale: update depaware Missing from prior commit. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c68a12afe9	cmd/tailscale: add temporary debug command for getting DNS-01 LetsEncrypt cert Not even close to usable or well integrated yet, but submitting this before it bitrots or I lose it. Updates #1235 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	d2d55bd63c	cmd/microproxy: delete. Thank goodness. Fixes #2635 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Josh Bleecher Snyder	a4e19f2233	version: remove rsc.io/goversion dependency rsc.io/goversion is really expensive. Running version.ReadExe on tailscaled on darwin allocates 47k objects, almost 11mb. All we want is the module info. For that, all we need to do is scan through the binary looking for the magic start/end strings and then grab the bytes in between them. We can do that easily and quickly with nothing but a 64k buffer. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
David Crawshaw	360223fccb	types/dnstype: introduce new package for Resolver So the type can be used in net/dns without introducing a tailcfg dependency. For #2596 Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	3 years ago
Josh Bleecher Snyder	eee6b85b9b	cmd/tailscaled: don't require root for --cleanup Without this, the integration tests fail locally for me: --- FAIL: TestCollectPanic (7.61s) integration.go:74: built [tailscale.com/cmd/tailscaled tailscale.com/cmd/tailscale] in 1.59s integration_test.go:102: initial run: tailscaled requires root; use sudo tailscaled (or use --tun=userspace-networking) integration_test.go:108: cleanup failed: exit status 1: "tailscaled requires root; use sudo tailscaled (or use --tun=userspace-networking)\n" stuntest.go:64: STUN server shutdown FAIL FAIL tailscale.com/tstest/integration 9.678s FAIL Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	a5da4ed981	all: gofmt with Go 1.17 This adds "//go:build" lines and tidies up existing "// +build" lines. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	a729070252	net/tstun: add start of Linux TAP support, with DHCP+ARP server Still very much a prototype (hard-coded IPs, etc) but should be non-invasive enough to submit at this point and iterate from here. Updates #2589 Co-Author: David Crawshaw <crawshaw@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	fd7b738e5b	derp: use pad32 package for padding, reduce duplication Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	fdc081c291	net/portmapper: fix UPnP probing, work against all ports Prior to Tailscale 1.12 it detected UPnP on any port. Starting with Tailscale 1.11.x, it stopped detecting UPnP on all ports. Then start plumbing its discovered Location header port number to the code that was assuming port 5000. Fixes #2109 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	f3c96df162	ipn/ipnstate: move tailscale status "active" determination to tailscaled Fixes #2579 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	1db9032ff5	cmd/tailscaled: let portmap debug mode have an gateway/IP override knob For testing pfSense clients "behind" pfSense on Digital Ocean where the main interface still exists. This is easier for debugging. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	31ea073a73	cmd/tailscaled: add debug -portmap mode Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Crawshaw	3e039daf95	logpolicy: actually collect panics (Written with Josh) For #2544 Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	3 years ago
Brad Fitzpatrick	d37451bac6	cmd/derper: dial VPC address with right context Fix bug from just-submitted `e422e9f4c9`. Updates #2414 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	e422e9f4c9	cmd/derper: mesh over VPC network Updates #2414 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	9da4181606	tstime/rate: new package This is a simplified rate limiter geared for exactly our needs: A fast, mono.Time-based rate limiter for use in tstun. It was generated by stripping down the x/time/rate rate limiter to just our needs and switching it to use mono.Time. It removes one time.Now call per packet. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	8a3d52e882	wgengine/magicsock: use mono.Time magicsock makes multiple calls to Now per packet. Move to mono.Now. Changing some of the calls to use package mono has a cascading effect, causing non-per-packet call sites to also switch. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	c2202cc27c	net/tstun: use mono.Time There's a call to Now once per packet. Move to mono.Now. Though the current implementation provides high precision, we document it to be coarse, to preserve the ability to switch to a coarse monotonic time later. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Aaron Bieber	c179b9b535	cmd/tsshd: switch from github.com/kr/pty to github.com/creack/pty The kr/pty module moved to creack/pty per the kr/pty README[1]. creack/pty brings in support for a number of OS/arch combos that are lacking in kr/pty. Run `go mod tidy` while here. [1] https://github.com/kr/pty/blob/master/README.md Signed-off-by: Aaron Bieber <aaron@bolddaemon.com>	3 years ago
Brad Fitzpatrick	7b9f02fcb1	cmd/tailscale/cli: document that empty string disable exit nodes, routes Updates #2529 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Joe Tsai	d145c594ad	util/deephash: improve cycle detection (#2470 ) The previous algorithm used a map of all visited pointers. The strength of this approach is that it quickly prunes any nodes that we have ever visited before. The detriment of the approach is that pruning is heavily dependent on the order that pointers were visited. This is especially relevant for hashing a map where map entries are visited in a non-deterministic manner, which would cause the map hash to be non-deterministic (which defeats the point of a hash). This new algorithm uses a stack of all visited pointers, similar to how github.com/google/go-cmp performs cycle detection. When we visit a pointer, we push it onto the stack, and when we leave a pointer, we pop it from the stack. Before visiting a pointer, we first check whether the pointer exists anywhere in the stack. If yes, then we prune the node. The detriment of this approach is that we may hash a node more often than before since we do not prune as aggressively. The set of visited pointers up until any node is only the path of nodes up to that node and not any other pointers that may have been visited elsewhere. This provides us deterministic hashing regardless of visit order. We can now delete hashMapFallback and associated complexity, which only exists because the previous approach was non-deterministic in the presence of cycles. This fixes a failure of the old algorithm where obviously different values are treated as equal because the pruning was too aggresive. See https://github.com/tailscale/tailscale/issues/2443#issuecomment-883653534 The new algorithm is slightly slower since it prunes less aggresively: name old time/op new time/op delta Hash-8 66.1µs ± 1% 68.8µs ± 1% +4.09% (p=0.000 n=19+19) HashMapAcyclic-8 63.0µs ± 1% 62.5µs ± 1% -0.76% (p=0.000 n=18+19) TailcfgNode-8 9.79µs ± 2% 9.88µs ± 1% +0.95% (p=0.000 n=19+17) HashArray-8 643ns ± 1% 653ns ± 1% +1.64% (p=0.000 n=19+19) However, a slower but more correct algorithm seems more favorable than a faster but incorrect algorithm. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Brad Fitzpatrick	ed8587f90d	wgengine/router: take a link monitor Prep for #1591 which will need to make Linux's router react to changes that the link monitor observes. The router package already depended on the monitor package transitively. Now it's explicit. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7f7a81e5ae	cmd/tailscaled: add func to create ipnserver.Opts To unify the Windows service and non-service/non-Windows paths a bit. And provides a way to make Linux act like Windows for testing. (notably, for testing the fix to #2137) One perhaps visible change of this is that tailscaled.exe when run in cmd.exe/powershell (not as a Windows Service) no longer uses the "_daemon" autostart key. But in addition to being naturally what falls out of this change, that's also what Windows users would likely want, as otherwise the unattended mode user is ignored when the "_daemon" autostart key is specified. Notably, this would let people debug what their normally-run-as-a-service tailscaled is doing, even when they're running in Unattended Mode. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	87244eda3f	cmd/tailscale/cli: allow effective GOOS to be changed for integration tests Adds TS_DEBUG_UP_FLAG_GOOS for integration tests to make "tailscale up" act like other OSes. For an upcoming change to test #2137. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	4dbbd0aa4a	cmd/addlicense: add command to add licenseheaders to generated code And use it to make our stringer invocations match the existing code. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	ec4d721572	cmd/tailscaled: use state key constant from ipn package Rather than redefining it again. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	e2eaae8224	cmd/derpprobe: add in a delay to wait for mesh info to sync	3 years ago

1 2 3 4 5 ...

550 Commits (d00341360f12d6c5d23f563ce3cc21a31a978386)