tailscale

Commit Graph

Author	SHA1	Message	Date
Brad Fitzpatrick	ea4425d8a9	ipn/ipnlocal, wgengine/magicsock: move UpdateStatus stuff around Upcoming work on incremental netmap change handling will require some replumbing of which subsystems get notified about what. Done naively, it could break "tailscale status --json" visibility later. To make sure I understood the flow of all the updates I was rereading the status code and realized parts of ipnstate.Status were being populated by the wrong subsystems. The engine (wireguard) and magicsock (data plane, NAT traveral) should only populate the stuff that they uniquely know. The WireGuard bits were fine but magicsock was populating stuff stuff that LocalBackend could've better handled, so move it there. Updates #1909 Change-Id: I6d1b95d19a2d1b70fbb3c875fac8ea1e169e8cb0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
James Tucker	e1c7e9b736	wgengine/magicsock: improve endpoint selection for WireGuard peers with rx time If we don't have the ICMP hint available, such as on Android, we can use the signal of rx traffic to bias toward a particular endpoint. We don't want to stick to a particular endpoint for a very long time without any signals, so the sticky time is reduced to 1 second, which is large enough to avoid excessive packet reordering in the common case, but should be small enough that either rx provides a strong signal, or we rotate in a user-interactive schedule to another endpoint, improving the feel of failover to other endpoints. Updates #8999 Co-authored-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com> Signed-off-by: James Tucker <james@tailscale.com> Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	2 years ago
James Tucker	5edb39d032	wgengine/magicsock: clear out endpoint statistics when it becomes bad There are cases where we do not detect the non-viability of a route, but we will instead observe a failure to send. In a Disco path this would normally be handled as a side effect of Disco, which is not available to non-Disco WireGuard nodes. In both cases, recognizing the failure as such will result in faster convergence. Updates #8999 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Charlotte Brandhorst-Satzkorn	7c9c68feed	wgengine/magicsock: update lastfullping comment to include wg only LastFullPing is now used for disco or wireguard only endpoints. This change updates the comment to make that clear. Updates #7826 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	2 years ago
James Tucker	3a652d7761	wgengine/magicsock: clear endpoint state in noteConnectivityChange There are latency values stored in bestAddr and endpointState that are no longer applicable after a connectivity change and should be cleared out, following the documented behavior of the function. Updates #8999 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Brad Fitzpatrick	84b94b3146	types/netmap, all: make NetworkMap.SelfNode a tailcfg.NodeView Updates #1909 Change-Id: I8c470cbc147129a652c1d58eac9b790691b87606 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Val	c15997511d	wgengine/magicsock: only accept pong sent by CLI ping When sending a ping from the CLI, only accept a pong that is in reply to the specific CLI ping we sent. Updates #311 Signed-off-by: Val <valerie@tailscale.com>	2 years ago
Brad Fitzpatrick	58a4fd43d8	types/netmap, all: use read-only tailcfg.NodeView in NetworkMap Updates #8948 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	af2e4909b6	all: remove some Debug fields, NetworkMap.Debug, Reconfig Debug arg Updates #8923 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	25663b1307	tailcfg: remove most Debug fields, move bulk to nodeAttrs [capver 70] Now a nodeAttr: ForceBackgroundSTUN, DERPRoute, TrimWGConfig, DisableSubnetsIfPAC, DisableUPnP. Kept support for, but also now a NodeAttr: RandomizeClientPort. Removed: SetForceBackgroundSTUN, SetRandomizeClientPort (both never used, sadly... never got around to them. But nodeAttrs are better anyway), EnableSilentDisco (will be a nodeAttr later when that effort resumes). Updates #8923 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	bc0eb6b914	all: import x/exp/maps as xmaps to distinguish from Go 1.21 "maps" Updates #8419 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
KevinLiang10	7ed3681cbe	tailcfg: Add FirewallMode to NetInfo to record wether host using iptables or nftables To record wether user is using iptables or nftables after we add support to nftables on linux, we are adding a field FirewallMode to NetInfo in HostInfo to reflect what firewall mode the host is running, and form metrics. The information is gained from a global constant in hostinfo.go. We set it when selection heuristic made the decision, and magicsock reports this to control. Updates: tailscale/corp#13943 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	2 years ago
Andrew Dunham	95d776bd8c	wgengine/magicsock: only cache N most recent endpoints per-Addr If a node is flapping or otherwise generating lots of STUN endpoints, we can end up caching a ton of useless values and sending them to peers. Instead, let's apply a fixed per-Addr limit of endpoints that we cache, so that we're only sending peers up to the N most recent. Updates tailscale/corp#13890 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I8079a05b44220c46da55016c0e5fc96dd2135ef8	2 years ago
James Tucker	de8e55fda6	net/netcheck,wgengine/magicsock: reduce coupling between netcheck and magicsock Netcheck no longer performs I/O itself, instead it makes requests via SendPacket and expects users to route reply traffic to ReceiveSTUNPacket. Netcheck gains a Standalone function that stands up sockets and goroutines to implement I/O when used in a standalone fashion. Magicsock now unconditionally routes STUN traffic to the netcheck.Client that it hosts, and plumbs the send packet sink. The CLI is updated to make use of the Standalone mode. Fixes #8723 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Brad Fitzpatrick	92fc9a01fa	cmd/tailscale: add debug commands to break connections For testing reconnects. Updates tailscale/corp#5761 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
salman aljammaz	99e06d3544	magicsock: set the don't fragment sockopt (#8715 ) This sets the Don't Fragment flag, for now behind the TS_DEBUG_ENABLE_PMTUD envknob. Updates #311. Signed-off-by: Val <valerie@tailscale.com> Signed-off-by: salman <salman@tailscale.com>	2 years ago
salman aljammaz	25a7204bb4	wgengine,ipn,cmd/tailscale: add size option to ping (#8739 ) This adds the capability to pad disco ping message payloads to reach a specified size. It also plumbs it through to the tailscale ping -size flag. Disco pings used for actual endpoint discovery do not use this yet. Updates #311. Signed-off-by: salman <salman@tailscale.com> Co-authored-by: Val <valerie@tailscale.com>	2 years ago
salman aljammaz	68f8e5678e	wgengine/magicsock: remove dead code (#8745 ) The nonce value is not read by anything, and di.sharedKey.Seal() a few lines below generates its own. #cleanup Signed-off-by: salman <salman@tailscale.com>	2 years ago
David Anderson	52212f4323	all: update exp/slices and fix call sites slices.SortFunc suffered a late-in-cycle API breakage. Updates #cleanup Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
David Anderson	9d89e85db7	wgengine/magicsock: document mysterious-looking assignment Updates #cleanup Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
David Anderson	84777354a0	wgengine/magicsock: factor out more separable parts Updates #8720 Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
David Anderson	9a76deb4b0	disco: move disco pcap helper to disco package Updates tailscale/corp#13464 Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
David Anderson	cde37f5307	wgengine/magicsock: factor out peerMap into separate file Updates tailscale/corp#13464 Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
David Anderson	f7016d8c00	wgengine/magicsock: factor out endpoint into its own file Updates tailscale/corp#13464 Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
David Anderson	c2831f6614	wgengine/magicsock: delete unused stuff Updates tailscale/corp#13464 Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
Charlotte Brandhorst-Satzkorn	339397ab74	wgengine/magicsock: remove noV4/noV6 check in addrForSendWireGuardLocked This change removes the noV4/noV6 check from addrForSendWireGuardLocked. On Android, the client panics when reaching `rand.Intn()`, likely due to the candidates list being containing no candidates. The suspicion is that the `noV4` and the `noV6` are both being triggered causing the loop to continue. Updates tailscale/corp#12938 Updates #7826 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	2 years ago
Brad Fitzpatrick	8b80d63b42	wgengine/magicsock: clarify a log message is a warning, not an error Updates #cleanup Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	2a9d46c38f	wgengine/magicsock: prefer private endpoints to public ones Switch our best address selection to use a scoring-based approach, where we boost each address based on whether it's a private IP or IPv6. For users in cloud environments, this biases endpoint selection towards using an endpoint that is less likely to cost the user money, and should be less surprising to users. This also involves updating the tests to not use private IPv4 addresses; other than that change, the behaviour should be identical for existing endpoints. Updates #8097 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I069e3b399daea28be66b81f7e44fc27b2943d8af	3 years ago
Brad Fitzpatrick	4d7927047c	wgengine/magicsock: annotate, skip flaky TestIsWireGuardOnlyPickEndpointByPing Updates #8037 Updates #7826 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Charlotte Brandhorst-Satzkorn	ddb4040aa0	wgengine/magicsock: add address selection for wireguard only endpoints (#7979 ) This change introduces address selection for wireguard only endpoints. If a endpoint has not been used before, an address is randomly selected to be used based on information we know about, such as if they are able to use IPv4 or IPv6. When an address is initially selected, we also initiate a new ICMP ping to the endpoints addresses to determine which endpoint offers the best latency. This information is then used to update which endpoint we should be using based on the best possible route. If the latency is the same for a IPv4 and an IPv6 address, IPv6 will be used. Updates #7826 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	3 years ago
Andrew Dunham	bcf7b63d7e	wgengine/magicsock: add hysteresis to endpoint selection Avoid selecting an endpoint as "better" than the current endpoint if the total latency improvement is less than 1%. This adds some hysteresis to avoid flapping between endpoints for a minimal improvement in latency. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: If8312e1768ea65c4b4d4e13d8de284b3825d7a73	3 years ago
Mihai Parparita	7330aa593e	all: avoid repeated default interface lookups On some platforms (notably macOS and iOS) we look up the default interface to bind outgoing connections to. This is both duplicated work and results in logspam when the default interface is not available (i.e. when a phone has no connectivity, we log an error and thus cause more things that we will try to upload and fail). Fixed by passing around a netmon.Monitor to more places, so that we can use its cached interface state. Fixes #7850 Updates #7621 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Mihai Parparita	4722f7e322	all: move network monitoring from wgengine/monitor to net/netmon We're using it in more and more places, and it's not really specific to our use of Wireguard (and does more just link/interface monitoring). Also removes the separate interface we had for it in sockstats -- it's a small enough package (we already pull in all of its dependencies via other paths) that it's not worth the extra complexity. Updates #7621 Updates #7850 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Andrew Dunham	f85dc6f97c	ci: add more lints (#7909 ) This is a follow-up to #7905 that adds two more linters and fixes the corresponding findings. As per the previous PR, this only flags things that are "obviously" wrong, and fixes the issues found. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I8739bdb7bc4f75666a7385a7a26d56ec13741b7c	3 years ago
Andrew Dunham	80b138f0df	wgengine/magicsock: keep advertising endpoints after we stop discovering them Previously, when updating endpoints we would immediately stop advertising any endpoint that wasn't discovered during determineEndpoints. This could result in, for example, a case where we performed an incremental netcheck, didn't get any of our three STUN packets back, and then dropped our STUN endpoint from the set of advertised endpoints... which would result in clients falling back to a DERP connection until the next call to determineEndpoints. Instead, let's cache endpoints that we've discovered and continue reporting them to clients until a timeout expires. In the above case where we temporarily don't have a discovered STUN endpoint, we would continue reporting the old value, then re-discover the STUN endpoint again and continue reporting it as normal, so clients never see a withdrawal. Updates tailscale/coral#108 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I42de72e7418ab328a6c732bdefc74549708cf8b9	3 years ago
Brad Fitzpatrick	4b49ca4a12	wgengine/magicsock: update comments on what implements conn.Bind The comment still said *magicsock.Conn implemented wireguard-go conn.Bind. That wasn't accurate anymore. A doc #cleanup. Change-Id: I7fd003b939497889cc81147bfb937b93e4f6865c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	10f1c90f4d	wgengine/magicsock, types/nettype, etc: finish ReadFromUDPAddrPort netip migration So we're staying within the netip.Addr/AddrPort consistently and avoiding allocs/conversions to the legacy net addr types. Updates #5162 Change-Id: I59feba60d3de39f773e68292d759766bac98c917 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	29f7df9d8f	wgengine/magicsock, etc: remove mostly unused WriteTo methods Updates #2331 Updates #5162 Change-Id: I8291884425481eeaedde38a54adfd8ed7292a497 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
James Tucker	20f17d6e7b	wgengine/magicsock: reenable magicsock tests on Windows These tests are passing locally and on CI. They had failed earlier in the day when first fixing up CI, and it is not immediately clear why. I have cycled IPv6 support locally, but this should not have a substantial effect. Updates #7876 Signed-off-by: James Tucker <jftucker@gmail.com>	3 years ago
James Tucker	8dec1a8724	.github/workflows: reenable Windows CI, disable broken tests We accidentally switched to ./tool/go in `4022796484` which resulted in no longer running Windows builds, as this is attempting to run a bash script. I was unable to quickly fix the various tests that have regressed, so instead I've added skips referencing #7876, which we need to back and fix. Updates #7262 Updates #7876 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Brad Fitzpatrick	6866aaeab3	wgengine/magicsock: factor out receiveIPv4 & receiveIPv6 common code Updates #2331 Change-Id: I801df38b217f5d17203e8dc3b8654f44747e0f4b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Andrew Dunham	228d0c6aea	net/netcheck: use dnscache.Resolver when resolving DERP IPs This also adds a bunch of tests for this function to ensure that we're returning the proper IP(s) in all cases. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I0d9d57170dbab5f2bf07abdf78ecd17e0e635399	3 years ago
Maisem Ali	64bbf1738e	tailcfg: make SelfNodeV4MasqAddrForThisPeer a pointer This makes `omitempty` actually work, and saves bytes in each map response. Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Mihai Parparita	edb02b63f8	net/sockstats: pass in logger to sockstats.WithSockStats Using log.Printf may end up being printed out to the console, which is not desirable. I noticed this when I was investigating some client logs with `sockstats: trace "NetcheckClient" was overwritten by another`. That turns to be harmless/expected (the netcheck client will fall back to the DERP client in some cases, which does its own sockstats trace). However, the log output could be visible to users if running the `tailscale netcheck` CLI command, which would be needlessly confusing. Updates tailscale/corp#9230 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
James Tucker	e09c434e5d	wgengine/magicsock: remove locking sync requirements on conn disco keys The lazy initialization of the disco key is not necessary, and contributes to unnecessary locking and state checking. Updates #cleanup Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
James Tucker	e1b71c83ac	wgengine/magicsock: remove unused fields on discoInfo Updates #cleanup Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
James Tucker	a257b2f88b	wgengine/magicsock: add immutability documentation to endpointDisco Updates #7825 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Charlotte Brandhorst-Satzkorn	c573bef0aa	tailcfg,wgengine: add initial support for WireGuard only peers A peer can have IsWireGuardOnly, which means it will not support DERP or Disco, and it must have Endpoints filled in order to be usable. In the present implementation only the first Endpoint will be used as the bestAddr. Updates tailscale/corp#10351 Co-authored-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com> Co-authored-by: James Tucker <james@tailscale.com> Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
James Tucker	6cfcb3cae4	wgengine/magicsock: fix synchronization of endpoint disco fields Identified in review in #7821 endpoint.discoKey and endpoint.discoShort are often accessed without first taking endpoint.mu. The arrangement with endpoint.mu is inconvenient for a good number of those call-sites, so it is instead replaced with an atomic pointer to carry both pieces of disco info. This will also help with #7821 that wants to add explicit checks/guards to disable disco behaviors when disco keys are missing which is necessarily implicitly mostly covered by this change. Updates #7821 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Tom DNetto	6a627e5a33	net, wgengine/capture: encode NAT addresses in pcap stream Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
valscale	7bfb7744b7	derp,magicsock: add debug envknobs for HTTP and derp server name (#7744 ) Make developing derp easier by: 1. Creating an envknob telling clients to use HTTP to connect to derp servers, so devs don't have to acquire a valid TLS cert. 2. Creating an envknob telling clients which derp server to connect to, so devs don't have to edit the ACLs in the admin console to add a custom DERP map. 3. Explaining how the -dev and -a command lines args to derper interact. To use this: 1. Run derper with -dev. 2. Run tailscaled with TS_DEBUG_USE_DERP_HTTP=1 and TS_DEBUG_USE_DERP_ADDR=localhost This will result in the client connecting to derp via HTTP on port 3340. Fixes #7700 Signed-off-by: Val <valerie@tailscale.com>	3 years ago
Jordan Whited	f475e5550c	net/neterror, wgengine/magicsock: use UDP GSO and GRO on Linux (#7791 ) This commit implements UDP offloading for Linux. GSO size is passed to and from the kernel via socket control messages. Support is probed at runtime. UDP GSO is dependent on checksum offload support on the egress netdev. UDP GSO will be disabled in the event sendmmsg() returns EIO, which is a strong signal that the egress netdev does not support checksum offload. Updates tailscale/corp#8734 Signed-off-by: Jordan Whited <jordan@tailscale.com>	3 years ago
Andrew Dunham	8d3acc9235	util/sysresources, magicsock: scale DERP buffer based on system memory This adds the util/sysresources package, which currently only contains a function to return the total memory size of the current system. Then, we modify magicsock to scale the number of buffered DERP messages based on the system's available memory, ensuring that we never use a value lower than the previous constant of 32. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ib763c877de4d0d4ee88869078e7d512f6a3a148d	3 years ago
Jordan Whited	27e37cf9b3	go.mod, net/tstun, wgengine/magicsock: update wireguard-go (#7712 ) This commit updates the wireguard-go dependency to pull in fixes for the tun package, specifically 052af4a and aad7fca. Signed-off-by: Jordan Whited <jordan@tailscale.com>	3 years ago
valscale	74eb99aed1	derp, derphttp, magicsock: send new unknown peer frame when destination is unknown (#7552 ) * wgengine/magicsock: add envknob to send CallMeMaybe to non-existent peer For testing older client version responses to the PeerGone packet format change. Updates #4326 Signed-off-by: Val <valerie@tailscale.com> * derp: remove dead sclient struct member replaceLimiter Leftover from an previous solution to the duplicate client problem. Updates #2751 Signed-off-by: Val <valerie@tailscale.com> * derp, derp/derphttp, wgengine/magicsock: add new PeerGone message type Not Here Extend the PeerGone message type by adding a reason byte. Send a PeerGone "Not Here" message when an endpoint sends a disco message to a peer that this server has no record of. Fixes #4326 Signed-off-by: Val <valerie@tailscale.com> --------- Signed-off-by: Val <valerie@tailscale.com>	3 years ago
Andrew Dunham	be107f92d3	wgengine/magicsock: track per-endpoint changes in ringbuffer This change adds a ringbuffer to each magicsock endpoint that keeps a fixed set of "changes"–debug information about what updates have been made to that endpoint. Additionally, this adds a LocalAPI endpoint and associated "debug peer-status" CLI subcommand to fetch the set of changes for a given IP or hostname. Updates tailscale/corp#9364 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I34f726a71bddd0dfa36ec05ebafffb24f6e0516a	3 years ago
Mihai Parparita	6ac6ddbb47	sockstats: switch label to enum Makes it cheaper/simpler to persist values, and encourages reuse of labels as opposed to generating an arbitrary number. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Andrew Dunham	3f8e8b04fd	cmd/tailscale, cmd/tailscaled: move portmapper debugging into tailscale CLI The debug flag on tailscaled isn't available in the macOS App Store build, since we don't have a tailscaled binary; move it to the 'tailscale debug' CLI that is available on all platforms instead, accessed over LocalAPI. Updates #7377 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I47bffe4461e036fab577c2e51e173f4003592ff7	3 years ago
Mihai Parparita	9cb332f0e2	sockstats: instrument networking code paths Uses the hooks added by tailscale/go#45 to instrument the reads and writes on the major code paths that do network I/O in the client. The convention is to use "<package>.<type>:<label>" as the annotation for the responsible code path. Enabled on iOS, macOS and Android only, since mobile platforms are the ones we're most interested in, and we are less sensitive to any throughput degradation due to the per-I/O callback overhead (macOS is also enabled for ease of testing during development). For now just exposed as counters on a /v0/sockstats PeerAPI endpoint. We also keep track of the current interface so that we can break out the stats by interface. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Denton Gentry	fdc2018d67	wgengine/magicsock: remove superfluous "discokey" from log The stringification of the discokey type now prepends "discokey:" Fixes https://github.com/tailscale/tailscale/issues/3074 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Tom DNetto	2ca6dd1f1d	wgengine: start logging DISCO frames to pcap stream Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Andrew Dunham	7393ce5e4f	wgengine/magicsock: add envknob to print information about port selection To aid in debugging where a customer has static port-forwards set up and there are issues establishing a connection through that port. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ic5558bcdb40c9119b83f79dcacf2233b07777f2a	3 years ago
Jordan Whited	39e52c4b0a	wgengine/magicsock: fix de-dup disco ping handling for netmap endpoints (#7118 ) Fixes #7116 Signed-off-by: Jordan Whited <jordan@tailscale.com>	3 years ago
Jordan Whited	7921198c05	wgengine/magicsock: de-dup disco pings (#7093 ) Fixes #7078 Signed-off-by: Jordan Whited <jordan@tailscale.com>	3 years ago
Will Norris	947c14793a	all: update tools that manage copyright headers Update all code generation tools, and those that check for license headers to use the new standard header. Also update copyright statement in LICENSE file. Fixes #6865 Signed-off-by: Will Norris <will@tailscale.com>	3 years ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	3 years ago
Brad Fitzpatrick	d8feeeee4c	wgengine/magicsock: fix buggy fast path in Conn.SetNetworkMap Spotted by Maisem. Fixes #6680 Change-Id: I5fdc01de8b006a1c43a2a4848f69397f54b4453a Co-authored-By: Maisem Ali <maisem@tailscale.com> Co-authored-By: Andrew Dunham <andrew@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Jordan Whited	fec888581a	wgengine/magicsock: retry failed single packet ops across rebinds (#6990 ) The single packet WriteTo() through RebindingUDPConn.WriteBatch() was not checking for a rebind between loading the PacketConn and writing to it. Same with ReadFrom()/ReadBatch(). Fixes #6989 Signed-off-by: Jordan Whited <jordan@tailscale.com>	3 years ago
Andrew Dunham	aea251d42a	cmd/testwrapper: move from corp; mark magicsock test as flaky Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ibab5860f5797b3db151d3c27855333e43a9088a4	3 years ago
Brad Fitzpatrick	2df38b1feb	wgengine/magicsock: quiet log flood at tailscaled shutdown When you hit control-C on a tailscaled (notably in dev mode, but also on any systemctl stop/restart), there is a flood of messages like: magicsock: doing cleanup for discovery key d:aa9c92321db0807f magicsock: doing cleanup for discovery key d:bb0f16aacadbfd46 magicsock: doing cleanup for discovery key d:b5b2d386296536f2 magicsock: doing cleanup for discovery key d:3b640649f6796c91 magicsock: doing cleanup for discovery key d:71d7b1afbcce52cd magicsock: doing cleanup for discovery key d:315b61d7e0111377 magicsock: doing cleanup for discovery key d:9301f63dce69bf45 magicsock: doing cleanup for discovery key d:376141884d6fe072 .... It can be hundreds or even tens of thousands. So don't do that. Not a useful log message during shutdown. Change-Id: I029a8510741023f740877df28adff778246c18e5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Andrew Dunham	11ce5b7e57	ipn/ipnlocal, wgengine/magicsock: check Expired bool on Node; print error in Ping Change-Id: Ic5f533f175a6e1bb73d4957d8c3f970add42e82e Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	3 years ago
Brad Fitzpatrick	be10b529ec	wgengine/magicsock: add TS_DISCO_PONG_IPV4_DELAY knob to bias IPv6 paths Fixes #6818 Change-Id: I71597a045c5b4117af69fba869cb616271c0dfe1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	2eff9c8277	wgengine/magicsock: avoid ReadBatch/WriteBatch on old Linux kernels Fixes #6807 Change-Id: I161424ef8a7338e1941d5e43d72dc6529993a0e3 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	0f604923d3	ipn/ipnlocal: fix StatusWithoutPeers not populating parts of Status Fixes #4311 Change-Id: Iaae0615148fa7154f4ef8f66b455e3a6c2fa9df3 Co-authored-by: Claire Wang <claire@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Joe Tsai	d9df023e6f	net/connstats: enforce maximum number of connections (#6760 ) The Tailscale logging service has a hard limit on the maximum log message size that can be accepted. We want to ensure that netlog messages never exceed this limit otherwise a client cannot transmit logs. Move the goroutine for periodically dumping netlog messages from wgengine/netlog to net/connstats. This allows net/connstats to manage when it dumps messages, either based on time or by size. Updates tailscale/corp#8427 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Brad Fitzpatrick	44be59c15a	wgengine/magicsock: fix panic in wireguard-go rate limiting path Fixes #6686 Change-Id: I1055a87141b07261afed8e36c963a69f3be26088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Jordan Whited	ea5ee6f87c	all: update golang.zx2c4.com/wireguard to github.com/tailscale/wireguard-go (#6692 ) This is temporary while we work to upstream performance work in https://github.com/WireGuard/wireguard-go/pull/64. A replace directive is less ideal as it breaks dependent code without duplication of the directive. Signed-off-by: Jordan Whited <jordan@tailscale.com>	3 years ago
Jordan Whited	76389d8baf	net/tstun, wgengine/magicsock: enable vectorized I/O on Linux (#6663 ) This commit updates the wireguard-go dependency and implements the necessary changes to the tun.Device and conn.Bind implementations to support passing vectors of packets in tailscaled. This significantly improves throughput performance on Linux. Updates #414 Signed-off-by: Jordan Whited <jordan@tailscale.com> Signed-off-by: James Tucker <james@tailscale.com> Co-authored-by: James Tucker <james@tailscale.com>	3 years ago
Mihai Parparita	bdc45b9066	wgengine/magicsock: fix panic when rebinding fails We would replace the existing real implementation of nettype.PacketConn with a blockForeverConn, but that violates the contract of atomic.Value (where the type cannot change). Fix by switching to a pointer value (atomic.Pointer[nettype.PacketConn]). A longstanding issue, but became more prevalent when we started binding connections to interfaces on macOS and iOS (#6566), which could lead to the bind call failing if the interface was no longer available. Fixes #6641 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Joe Tsai	2e5d08ec4f	net/connstats: invert network logging data flow (#6272 ) Previously, tstun.Wrapper and magicsock.Conn managed their own statistics data structure and relied on an external call to Extract to extract (and reset) the statistics. This makes it difficult to ensure a maximum size on the statistics as the caller has no introspection into whether the number of unique connections is getting too large. Invert the control flow such that a connstats.Statistics is registered with tstun.Wrapper and magicsock.Conn. Methods on non-nil connstats.Statistics are called for every packet. This allows the implementation of connstats.Statistics (in the future) to better control when it needs to flush to ensure bounds on maximum sizes. The value registered into tstun.Wrapper and magicsock.Conn could be an interface, but that has two performance detriments: 1. Method calls on interface values are more expensive since they must go through a virtual method dispatch. 2. The implementation would need a sync.Mutex to protect the statistics value instead of using an atomic.Pointer. Given that methods on constats.Statistics are called for every packet, we want reduce the CPU cost on this hot path. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Brad Fitzpatrick	3a168cc1ff	wgengine/magicsock: ignore pre-disco (pre-0.100) peers There aren't any in the wild, other than one we ran on purpose to keep us honest, but we can bump that one forward to 0.100. Change-Id: I129e70724b2d3f8edf3b496dc01eba3ac5a2a907 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
phirework	a011320370	magicsock: cleanup canp2p (#6391 ) This renames canP2P in magicsock to canP2PLocked to reflect expectation of mutex lock, fixes a race we discovered in the meantime, and updates the current stats. Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Jenny Zhang <jz@tailscale.com>	3 years ago
Brad Fitzpatrick	da8def8e13	all: remove old +build tags The //go:build syntax was introduced in Go 1.17: https://go.dev/doc/go1.17#build-lines gofmt has kept the +build and go:build lines in sync since then, but enough time has passed. Time to remove them. Done with: perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build') Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Joe Tsai	81fd259133	wgengine/magicsock: gather physical-layer statistics (#5925 ) There is utility in logging traffic statistics that occurs at the physical layer. That is, in order to send packets virtually to a particular tailscale IP address, what physical endpoints did we need to communicate with? This functionality logs IP addresses identical to what had always been logged in magicsock prior to #5823, so there is no increase in PII being logged. ExtractStatistics returns a mapping of connections to counts. The source is always a Tailscale IP address (without port), while the destination is some endpoint reachable on WAN or LAN. As a special case, traffic routed through DERP will use 127.3.3.40 as the destination address with the port being the DERP region. This entire feature is only enabled if data-plane audit logging is enabled on the tailnet (by default it is disabled). Example of type of information logged: ------------------------------------ Tx[P/s] Tx[B/s] Rx[P/s] Rx[B/s] PhysicalTraffic: 25.80 3.39Ki 38.80 5.57Ki 100.1.2.3 -> 143.11.22.33:41641 15.40 2.00Ki 23.20 3.37Ki 100.4.5.6 -> 192.168.0.100:41641 10.20 1.38Ki 15.60 2.20Ki 100.7.8.9 -> 127.3.3.40:2 0.20 6.40 0.00 0.00 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Andrew Dunham	74693793be	net/netcheck, tailcfg: track whether OS supports IPv6 We had previously added this to the netcheck report in #5087 but never copied it into the NetInfo struct. Additionally, add it to log lines so it's visible to support. Change-Id: Ib6266f7c6aeb2eb2a28922aeafd950fe1bf5627e Signed-off-by: Andrew Dunham <andrew@tailscale.com>	3 years ago
phirework	d13c9cdfb4	wgengine/magicsock: set up pathfinder (#5994 ) Sets up new file for separate silent disco goroutine, tentatively named pathfinder for now. Updates #540 Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Jenny Zhang <jz@tailscale.com>	3 years ago
Brad Fitzpatrick	deac82231c	wgengine/magicsock: add start of alternate send path During development of silent disco (#540), an alternate send policy for magicsock that doesn't wake up the radio frequently with heartbeats, we want the old & new policies to coexist, like we did previously pre- and post-disco. We started to do that earlier in `5c42990c2f` but only set up the env+control knob plumbing to set a bool about which path should be used. This starts to add a way for the silent disco code to update the send path from a separate goroutine. (Part of the effort is going to de-state-machinify the event based soup that is the current disco code and make it more Go synchronous style.) So far this does nothing. (It does add an atomic load on each send but that should be noise in the grand scheme of things, and a even more rare atomic store of nil on node config changes.) Baby steps. Updates #540 Co-authored-by: Jenny Zhang <jz@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Joe Tsai	14100c0985	wgengine/magicsock: restore allocation-free endpoint.DstToString (#5971 ) The wireguard-go code unfortunately calls this unconditionally even when verbose logging is disabled. Partial revert of #5911. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Joe Tsai	9ee3df02ee	wgengine/magicsock: remove endpoint.wgEndpoint (#5911 ) This field seems seldom used and the documentation is wrong. It is simpler to just derive its original value dynamically when endpoint.DstToString is called. This method is potentially used by wireguard-go, but not in any code path is performance sensitive. All calls to it use it in conjunction with fmt.Printf, which is going to be slow anyways since it uses Go reflection. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
James Tucker	539c073cf0	wgengine/magicsock: set UDP socket buffer sizes to 7MB - At high data rates more buffer space is required in order to avoid packet loss during any cause of delay. - On slower machines more buffer space is required in order to avoid packet loss while decryption & tun writing is underway. - On higher latency network paths more buffer space is required in order to overcome BDP. - On Linux set with SO_*BUFFORCE to bypass net.core.{r,w}mem_max. - 7MB is the current default maximum on macOS 12.6 - Windows test is omitted, as Windows does not support getsockopt for these options. Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Brad Fitzpatrick	1841d0bf98	wgengine/magicsock: make debug-level stuff not logged by default And add a CLI/localapi and c2n mechanism to enable it for a fixed amount of time. Updates #1548 Change-Id: I71674aaf959a9c6761ff33bbf4a417ffd42195a7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Soref	d4811f11a0	all: fix spelling mistakes Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>	3 years ago
Kyle Carberry	91794f6498	wgengine/magicsock: move firstDerp check after nil derpMap check This fixes a race condition which caused `c.muCond.Broadcast()` to never fire in the `firstDerp` if block. It resulted in `Close()` hanging forever. Signed-off-by: Kyle Carberry <kyle@carberry.com>	3 years ago
Brad Fitzpatrick	832031d54b	wgengine/magicsock: fix recently introduced data race From `5c42990c2f`, not yet released in a stable build. Caught by existing tests. Fixes #5685 Change-Id: Ia76bb328809d9644e8b96910767facf627830600 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
phirework	5c42990c2f	wgengine/magicsock: add client flag and envknob to disable heartbeat (#5638 ) Baby steps towards turning off heartbeat pings entirely as per #540. This doesn't change any current magicsock functionality and requires additional changes to send/disco paths before the flag can be turned on. Updates #540 Change-Id: Idc9a72748e74145b068d67e6dd4a4ffe3932efd0 Signed-off-by: Jenny Zhang <jz@tailscale.com> Signed-off-by: Jenny Zhang <jz@tailscale.com>	3 years ago
Eng Zer Jun	f0347e841f	refactor: move from io/ioutil to io and os packages The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit replaces the existing io/ioutil functions with their new definitions in io and os packages. Reference: https://golang.org/doc/go1.16#ioutil Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>	3 years ago
Brad Fitzpatrick	74674b110d	envknob: support changing envknobs post-init Updates #5114 Change-Id: Ia423fc7486e1b3f3180a26308278be0086fae49b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	7c49db02a2	wgengine/magicsock: don't use BPF receive when SO_MARK doesn't work. Fixes #5607 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Colin Adler	9c8bbc7888	wgengine/magicsock: fix panic in http debug server Fixes an panic in `(*magicsock.Conn).ServeHTTPDebug` when the `recentPongs` ring buffer for an endpoint wraps around. Signed-off-by: Colin Adler <colin1adler@gmail.com>	3 years ago
James Tucker	672c2c8de8	wgengine/magicsock: add filter to ignore disco to old/other ports Incoming disco packets are now dropped unless they match one of the current bound ports, or have a zero port. The BPF filter passes all packets with a disco header to the raw packet sockets regardless of destination port (in order to avoid needing to reconfigure BPF on rebind). If a BPF enabled node has just rebound, due to restart or rebind, it may receive and reply to disco ping packets destined for ports other than those which are presently bound. If the pong is accepted, the pinging node will now assume that it can send WireGuard traffic to the pinged port - such traffic will not reach the node as it is not destined for a bound port. The zero port is ignored, if received. This is a speculative defense and would indicate a problem in the receive path, or the BPF filter. This condition is allowed to pass as it may enable traffic to flow, however it will also enable problems with the same symptoms this patch otherwise fixes. Fixes #5536 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
James Tucker	be140add75	wgengine/magicsock: fix regression in initial bind for js `1f959edeb0` introduced a regression for JS where the initial bind no longer occurred at all for JS. The condition is moved deeper in the call tree to avoid proliferation of higher level conditions. Updates #5537 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
James Tucker	1f959edeb0	wgengine/magicksock: remove nullability of RebindingUDPConns Both RebindingUDPConns now always exist. the initial bind (which now just calls rebind) now ensures that bind is called for both, such that they both at least contain a blockForeverConn. Calling code no longer needs to assert their state. Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Brad Fitzpatrick	e470893ba0	wgengine/magicsock: use mak in another spot Change-Id: I0a46d6243371ae6d126005a2bd63820cb2d1db6b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Andrew Dunham	c72caa6672	wgengine/magicsock: use AF_PACKET socket + BPF to read disco messages This is entirely optional (i.e. failing in this code is non-fatal) and only enabled on Linux for now. Additionally, this new behaviour can be disabled by setting the TS_DEBUG_DISABLE_AF_PACKET environment variable. Updates #3824 Replaces #5474 Co-authored-by: Andrew Dunham <andrew@du.nham.ca> Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Andrew Dunham	e945d87d76	util/uniq: use generics instead of reflect (#5491 ) This takes 75% less time per operation per some benchmarks on my mac. Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	3 years ago
Kris Brandow	5d559141d5	wgengine/magicsock: remove mention of Start The Start method was removed in `4c27e2fa22`, but the comment on NewConn still mentioned it doesn't do anything until this method is called. Signed-off-by: Kris Brandow <kris.brandow@gmail.com>	3 years ago
Andrew Dunham	f0d6f173c9	net/netcheck: try ICMP if UDP is blocked (#5056 ) Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	3 years ago
Maisem Ali	a9f6cd41fd	all: use syncs.AtomicValue Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	4950fe60bd	syncs, all: move to using Go's new atomic types instead of ours Fixes #5185 Change-Id: I850dd532559af78c3895e2924f8237ccc328449d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	9bb5a038e5	all: use atomic.Pointer Also add some missing docs. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	5381437664	logtail, net/portmapper, wgengine/magicsock: use fmt.Appendf Fixes #5206 Change-Id: I490bb92e774ce7c044040537e2cd864fcf1dbe5a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	5f6abcfa6f	all: migrate code from netaddr.FromStdAddr to Go 1.18 With caveat https://github.com/golang/go/issues/53607#issuecomment-1203466984 that then requires a new wrapper. But a simpler one at least. Updates #5162 Change-Id: I0a5265065bfcd7f21e8dd65b2bd74cae90d76090 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	8725b14056	all: migrate more code code to net/netip directly Instead of going through the tailscale.com/net/netaddr transitional wrappers. Updates #5162 Change-Id: I3dafd1c2effa1a6caa9b7151ecf6edd1a3fda3dd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	fb82299f5a	wgengine/magicsock: avoid RebindingUDPConn mutex in common read/write case Change-Id: I209fac567326f2e926bace2582dbc67a8bc94c78 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	116f55ff66	all: gofmt for Go 1.19 Updates #5210 Change-Id: Ib02cd5e43d0a8db60c1f09755a8ac7b140b670be Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	6a396731eb	all: use various net/netip parse funcs directly Mechanical change with perl+goimports. Changed {Must,}Parse{IP,IPPrefix,IPPort} to their netip variants, then goimports -d . Finally, removed the net/netaddr wrappers, to prevent future use. Updates #5162 Change-Id: I59c0e38b5fbca5a935d701645789cddf3d7863ad Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d8cb5aae17	tailcfg, control/controlclient: add tailcfg.PeersChangedPatch [capver 33] This adds a lighter mechanism for endpoint updates from control. Change-Id: If169c26becb76d683e9877dc48cfb35f90cc5f24 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Mihai Parparita	27a1ad6a70	wasm: exclude code that's not used on iOS for Wasm too It has similar size constraints. Saves ~1.9MB from the Wasm build. Updates #3157 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	4 years ago
Mihai Parparita	561f7be434	wgengine/magicsock: remove unused metric We don't increment the metricRecvData anywhere, just the per-protocol ones. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	4 years ago
James Tucker	f9e86e64b7	*: use WireGuard where logged, printed or named Signed-off-by: James Tucker <james@tailscale.com>	4 years ago
Maisem Ali	2265587d38	wgengine/{,magicsock}: add metrics for rebinds and restuns Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Brad Fitzpatrick	910ae68e0b	util/mak: move tailssh's mapSet into a new package for reuse elsewhere Change-Id: Idfe95db82275fd2be6ca88f245830731a0d5aecf Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	f2041c9088	all: use strings.Cut even more Change-Id: I943ce72c6f339589235bddbe10d07799c4e37979 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	0868329936	all: use any instead of interface{} My favorite part of generics. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	5f176f24db	go.mod: upgrade to the latest wireguard-go This pulls in a handful of fixes and an update to Go 1.18. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	1b57b0380d	wgengine/magicsock: remove final alloc from ReceiveFrom And now that we don't have to play escape analysis and inlining games, simplify the code. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	08cf54f386	wgengine/magicsock: fix goMajorVersion for 1.18 ts release The version string changed slightly. Adapt. And always check the current Go version to prevent future accidental regressions. I would have missed this one had I not explicitly manually checked it. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Maisem Ali	72d8672ef7	tailcfg: make Node.Hostinfo a HostinfoView Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Brad Fitzpatrick	2db6cd1025	ipn/ipnlocal, wgengine/magicsock, logpolicy: quiet more logs Updates #1548 Change-Id: Ied169f872e93be2857890211f2e018307d4aeadc Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	730aa1c89c	derp/derphttp, wgengine/magicsock: prefer IPv6 to DERPs when IPv6 works Fixes #3838 Change-Id: Ie47a2a30c7e8e431512824798d2355006d72fb6a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	7a18fe3dca	wgengine/magicsock: make debugUseDerpRoute an opt.Bool. Can still be constant, just needs the extra methods. Fixes #3812 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	41fd4eab5c	envknob: add new package for all the strconv.ParseBool(os.Getenv(..)) A new package can also later record/report which knobs are checked and set. It also makes the code cleaner & easier to grep for env knobs. Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	de4696da10	wgengine/magicsock: fix deadlock on shutdown This fixes a deadlock on shutdown. One goroutine is waiting to send on c.derpRecvCh before unlocking c.mu. The other goroutine is waiting to lock c.mu before receiving from c.derpRecvCh. #3736 has a more detailed explanation of the sequence of events. Fixes #3736 Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	5404a0557b	wgengine/magicsock: remove a per-DERP-packet map lookup in common case Updates #150 Change-Id: Iffb6eccbe7ca97af97d29be63b7e37d487b3ba28 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	5a317d312d	wgengine/magicsock: enable DERP Return Path Optimization (DRPO) Turning this on at the beginning of the 1.21.x dev cycle, for 1.22. Updates #150 Change-Id: I1de567cfe0be3df5227087de196ab88e60c9eb56 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c6c39930cc	wgengine/magicsock: fix lock ordering deadlock with derphttp Fixes #3726 Change-Id: I32631a44dcc1da3ae47764728ec11ace1c78190d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	addda5b96f	wgengine/magicsock: fix watchdog timeout on Close when IPv6 not available The blockForeverConn was only using its sync.Cond one side. Looks like it was just forgotten. Fixes #3671 Change-Id: I4ed0191982cdd0bfd451f133139428a4fa48238c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	28bf53f502	wgengine/magicsock: reduce disco ping heartbeat aggressiveness a bit Bigger changes coming later, but this should improve things a bit in the meantime. Rationale: * 2 minutes -> 45 seconds: 2 minutes was overkill and never considered phones/battery at the time. It was totally arbitrary. 45 seconds is also arbitrary but is less than 2 minutes. * heartbeat from 2 seconds to 3 seconds: in practice this meant two packets per second (2 pings and 2 pongs every 2 seconds) because the other side was also pinging us every 2 seconds on their own. That's just overkill. (see #540 too) So in the worst case before: when we sent a single packet (say: a DNS packet), we ended up sending 61 packets over 2 minutes: the 1 DNS query and then then 60 disco pings (2 minutes / 2 seconds) & received the same (1 DNS response + 60 pongs). Now it's 15. In 1.22 we plan to remove this whole timer-based heartbeat mechanism entirely. The 5 seconds to 6.5 seconds change is just stretching out that interval so you can still miss two heartbeats (other 3 + 3 seconds would be greater than 5 seconds). This means that if your peer moves without telling you, you can have a path out for 6.5 seconds now instead of 5 seconds before disco finds a new one. That will also improve in 1.22 when we start doing UDP+DERP at the same time when confidence starts to go down on a UDP path. Updates #3363 Change-Id: Ic2314bbdaf42edcdd7103014b775db9cf4facb47 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	a201b89e4a	wgengine/magicsock: reconnect to DERP when its definition changes Change-Id: I7c560feb9e4a6e155a35ec764a68354f19f694e4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	7d9b1de3aa	netcheck,portmapper,magicsock: ignore some UDP write errors on Linux Treat UDP send EPERM errors as a lost UDP packet, not something super fatal. That's just the Linux firewall preventing it from going out. And add a leaf package net/neterror for that (and future) policy that all three packages can share, with tests. Updates #3619 Change-Id: Ibdb838c43ee9efe70f4f25f7fc7fdf4607ba9c1d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	2c94e3c4ad	wgengine/magicsock: don't unconditionally close DERP connections on rebind Only if the source address isn't on the currently active interface or a ping of the DERP server fails. Updates #3619 Change-Id: I6bf06503cff4d781f518b437c8744ac29577acc8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	ae319b4636	wgengine/magicsock: add HTML debug handler to see magicsock state Change-Id: Ibc46f4e9651e1c86ec6f5d139f5e9bdc7a488415 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c7f5bc0f69	wgengine/magicsock: add metrics for sent disco messages We only tracked the transport type (UDP vs DERP), not what they were. Change-Id: Ia4430c1c53afd4634e2d9893d96751a885d77955 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	486059589b	all: gofmt -w -s (simplify) tests And it updates the build tag style on a couple files. Change-Id: I84478d822c8de3f84b56fa1176c99d2ea5083237 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	7b9c7bc42b	ipn/ipnstate: remove old deprecated TailAddr IPv4-only field It's been a bunch of releases now since the TailscaleIPs slice replacement was added. Change-Id: I3bd80e1466b3d9e4a4ac5bedba8b4d3d3e430a03 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	33c541ae30	ipn/ipnlocal: populate self status from netmap in ipnlocal, not magicsock. Fixes #1933 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Josh Bleecher Snyder	758c37b83d	net/netns: thread logf into control functions So that darwin can log there without panicking during tests. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	8ec44d0d5f	wgengine/magicsock: remove some log spam Fixes tailscale/corp#3070 Change-Id: Ie50031800ec8669e0596ad6d59d1e329a5c88516 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	b3d6704aa3	wgengine/magicsock: fix data race on endpoint.discoKey endpoint.discoKey is protected by endpoint.mu. endpoint.sendDiscoMessage was reading it without holding the lock. This showed up in a CI failure and is readily reproducible locally. The fix is in two parts. First, for Conn.enqueueCallMeMaybe, eliminate the one-line helper method endpoint.sendDiscoMessage; call Conn.sendDiscoMessage directly. This makes it more natural to read endpoint.discoKey in a context in which endpoint.mu is already held. Second, for endpoint.sendDiscoPing, explicitly pass the disco key as an argument. Again, this makes it easier to read endpoint.discoKey in a context in which endpoint.mu is already held. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	7901289578	wgengine/magicsock: add a stress test And add a peerMap validate method that checks its internal invariants. Updates tailscale/corp#3016 Change-Id: I23708e68ed44d81986d9e2be82029d4555547592 Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	5a60781919	wgengine/magicsock: increase TestDiscokeyChange connection timeout I believe that this should eliminate the flakiness. If GitHub CI manages to be even slower that can be believed (and I can believe a lot at this point), then we should roll this back and make some more invasive changes. Updates #654 Fixes #3247 (I hope) Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	773af7292b	wgengine/magicsock: simplify peerMap.upsertEndpoint We can do the "maybe delete" check unilaterally: In the case of an insert, both oldDiscoKey and ep.discoKey will be the zero value. And since we don't use pi again, we can skip giving it a name, which makes scoping clearer. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	9da22dac3d	wgengine/magicsock: fix bug in peerMap.upsertEndpoint Found by inspection by David Crawshaw while investigating tailscale/corp#3016. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	16870cb754	wgengine/magicsock: fix typo in comment Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
David Anderson	41da7620af	go.mod: update wireguard-go to pick up roaming toggle wgengine/wgcfg: introduce wgcfg.NewDevice helper to disable roaming at all call sites (one real plus several tests). Fixes tailscale/corp#3016. Signed-off-by: David Anderson <danderson@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	24ea365d48	netcheck, controlclient, magicsock: add more metrics Updates #3307 Change-Id: Ibb33425764a75bde49230632f1b472f923551126 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	57b039c51d	util/clientmetrics: add new package to add metrics to the client And annotate magicsock as a start. And add localapi and debug handlers with the Prometheus-format exporter. Updates #3307 Change-Id: I47c5d535fe54424741df143d052760387248f8d3 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	0532eb30db	all: replace tailcfg.DiscoKey with key.DiscoPublic. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	7e6a1ef4f1	tailcfg: use key.NodePublic in wire protocol types. Updates #3206. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	72ace0acba	wgengine/magicsock: use key.NodePublic instead of tailcfg.NodeKey. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	d6e7cec6a7	types/netmap: use key.NodePublic instead of tailcfg.NodeKey. Update #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	84c3a09a8d	types/key: export constants for key size, not a method. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	6422789ea0	disco: use key.NodePublic instead of tailcfg.NodeKey. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	418adae379	various: use NodePublic.AsNodeKey() instead of tailcfg.NodeKeyFromNodePublic() Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	eeb97fd89f	various: remove remaining uses of key.NewPrivate. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	ef241f782e	wgengine/magicsock: remove uses of tailcfg.DiscoKey. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	55b6753c11	wgengine/magicsock: remove use of key.{Public,Private}. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	c1d009b9e9	ipn/ipnstate: use key.NodePublic instead of the generic key.Public. Updates #3206. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	37c150aee1	derp: use new node key type. Update #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	e03fda7ae6	wgengine/magicsock: remove test uses of wgkey. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Josh Bleecher Snyder	94fb42d4b2	all: use testingutil.MinAllocsPerRun There are a few remaining uses of testing.AllocsPerRun: Two in which we only log the number of allocations, and one in which dynamically calculate the allocations target based on a different AllocsPerRun run. This also allows us to tighten the "no allocs" test in wgengine/filter. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	1df865a580	wgengine/magicsock: allow even fewer allocs per UDP receive We improved things again for Go 1.18. Lock that in. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	c1d377078d	wgengine/magicsock: use testingutil.MinAllocsPerRun This speeds up and deflakes the test. Fixes #2826 (again) Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
David Anderson	c9bf773312	wgengine/magicsock: replace use of wgkey with new node key type. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	6e5175373e	types/netmap: use new node key type. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	a9c78910bd	wgengine/wgcfg: convert to use new node key type. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	b0b0a80318	net/netcheck: implement netcheck for js/wasm clients And the derper change to add a CORS endpoint for latency measurement. And a little magicsock change to cut down some log spam on js/wasm. Updates #3157 Change-Id: I5fd9e6f5098c815116ddc8ac90cbcd0602098a48 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Crawshaw	0b62f26349	magicsock: remove test data race Speculative, I haven't been able to replicate it locally. Fixes #3156 Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
Brad Fitzpatrick	ed3fb197ad	wgengine/magicsock: fix/disable a few misc things to get js/wasm working Updates #3157 Change-Id: Ie9e3a772bb9878584080bb257b32150492e26eaf Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	e25afc6656	wgengine/magicsock: don't try to determine endpoints on js/wasm Avoid netcheck, LocalAddr, etc. Updates #3157 Change-Id: Ibc875c787c0e101b8076e64833f4fcc809372815 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	6cb2705833	wgengine/magicsock: don't run UDP listeners on js/wasm Be DERP-only for now. (WebRTC can come later :)) Updates #3157 Change-Id: I56ebb3d914e37e8f4ab651306fd705b817ca381c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c30fa5903d	wgengine/magicsock: remove peerMap.byDiscoKey map No longer used. Updates #3088 Change-Id: I0ced3f87baa4053d3838d3c4a828ed0293923825 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Crawshaw	3552d86525	wgengine/magicsock: turn down timeouts in tests Before: --- PASS: TestActiveDiscovery (11.78s) --- PASS: TestActiveDiscovery/facing_easy_firewalls (5.89s) --- PASS: TestActiveDiscovery/facing_nats (5.89s) --- PASS: TestActiveDiscovery/simple_internet (0.89s) After: --- PASS: TestActiveDiscovery (1.98s) --- PASS: TestActiveDiscovery/facing_easy_firewalls (0.99s) --- PASS: TestActiveDiscovery/facing_nats (0.99s) --- PASS: TestActiveDiscovery/simple_internet (0.89s) Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
David Anderson	b956139b0c	wgengine/magicsock: track IP<>node mappings without relying on discokeys. Updates #3088. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	7a243ae5b1	wgengine/magicsock: finish TODO to speed up peerMap.forEachEndpointWithDiscoKey Now that peerMap tracks the set of nodes for a DiscoKey. Updates #3088 Change-Id: I927bf2bdfd2b8126475f6b6acc44bc799fcb489f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	11fdb14c53	wgengine/magicsock: don't check always-non-nil endpoint for nil-ness Continuation of `2aa5df7ac1`, remove nil check because it can never be nil. (It previously was able to be nil.) Change-Id: I59cd9ad611dbdcbfba680ed9b22e841b00c9d5e6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	e7eb46bced	wgengine/magicsock: add an explicit else branch to peerMap update. Clarifies that the replace+delete of peerinfo data is only when peerInfo already exists. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	2aa5df7ac1	wgengine/magicsock: document and enforce that peerInfo.ep is non-nil. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	521b44e653	wgengine/magicsock: move discoKey fields to the mutex-protected section. Fixes #3106 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	a6d02dc122	wgengine/magicsock: track which NodeKey each DiscoKey was last for This adds new fields (currently unused) to discoInfo to track what the last verified (unambiguous) NodeKey a DiscoKey last mapped to, and when. Then on CallMeMaybe, Pong and on most Pings, we update the mapping from DiscoKey to the current NodeKey for that DiscoKey. Updates #3088 Change-Id: Idc4261972084dec71cf8ec7f9861fb9178eb0a4d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c759fcc7d3	wgengine/magicsock: fix data race with sync.Pool in error+logging path Fixes #3122 Change-Id: Ib52e84f9bd5813d6cf2e80ce5b2296912a48e064 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	75a7779b42	disco, wgengine/magicsock: send self node key in disco pings This lets clients quickly (sub-millisecond within a local LAN) map from an ambiguous disco key to a node key without waiting for a CallMeMaybe (over relatively high latency DERP). Updates #3088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Denton Gentry	def650b3e8	wgengine/magicsock: don't Rebind after STUN error if closed. https://github.com/tailscale/tailscale/pull/3014 added a rebind on STUN failure, which means there can now be a tailscale.com/wgengine/magicsock.(*RebindingUDPConn).ReadFromNetaddr in progress at the end of the test waiting for a STUN response which will never arrive. This causes a test flake due to the resource leak in those cases where the Conn decided to rebind. For whatever reason, it mostly flakes with Windows. If the Conn is closed, don't Rebind after a send error. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	4 years ago
Brad Fitzpatrick	f55c2bccf5	wgengine/magicsock: don't call setAddrToDiscoLocked on DERP ping Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	569f70abfd	wgengine/magicsock: finish some renamings of discoEndpoint to endpoint Renames only; continuation of earlier `8049063d35` These kept confusing me while working on #3088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	695df497ba	wgengine/magicsock: delete peerMap.endpointForDiscoKey, remove remaining caller The one remaining caller of peerMap.endpointForDiscoKey was making the improper assumption that there's exactly 1 node with a given DiscoKey in the network. That was the cause of #3088. Now that all the other callers have been updated to not use endpointForDiscoKey, there's no need to try to keep maintaining that prone-to-misuse index. Updates #3088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	04fd94acd6	wgengine/magicsock: remove endpointForDiscoKey call from handleDiscoMessage A DiscoKey maps 1:n to endpoints. When we get a disco pong, we don't necessarily know which endpoint sent it to us. Ask them all. There will only usually be 1 (and in rare circumstances 2). So it's easier to ask all two rather than building new maps from the random ping TxID to its endpoint. Updates #3088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	151b4415ca	wgengine/magicsock: remove endpoint parameter from handlePingLocked We can reply to a ping without knowing which exact node it's from. As long as it's in our netmap, it's safe to reply. If there's more than one node with that discokey, it doesn't matter who we're relpying to. Updates #3088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	d86081f353	wgengine/magicsock: add new discoInfo type for DiscoKey state, move some fields As more prep for removing the false assumption that you're able to map from DiscoKey to a single peer, move the lastPingFrom and lastPingTime fields from the endpoint type to a new discoInfo type, effectively upgrading the old sharedDiscoKey map (which only held a *[32]byte nacl precomputed key as its value) to discoInfo which then includes that naclbox key. Then start plumbing it into handlePing in prep for removing the need for handlePing to take an endpoint parameter. Updates #3088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	e5779f019e	wgengine/magicsock: move temporary endpoint lookup later, add TODO to remove Updates #3088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	36a07089ee	wgengine/magicsock: remove redundant/wrong sharedDiscoKey delete The pass just after in this method handles cleaning up sharedDiscoKey. No need to do it wrong (assuming DiscoKey => 1 node) earlier. Updates #3088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	3e80806804	wgengine/magicsock: pass src NodeKey to handleDiscoMessage for DERP disco msgs And then use it to avoid another lookup-by-DiscoKey. Updates #3088	4 years ago
Brad Fitzpatrick	82fa15fa3b	wgengine/magicsock: start removing endpointForDiscoKey It's not valid to assume that a discokey is globally unique. This removes the first two of the four callers. Updates #3088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Avery Pennarun	0d4a0bf60e	magicsock: if STUN failed to send before, rebind before STUNning again. On iOS (and possibly other platforms), sometimes our UDP socket would get stuck in a state where it was bound to an invalid interface (or no interface) after a network reconfiguration. We can detect this by actually checking the error codes from sending our STUN packets. If we completely fail to send any STUN packets, we know something is very broken. So on the next STUN attempt, let's rebind the UDP socket to try to correct any problems. This fixes a problem where iOS would sometimes get stuck using DERP instead of direct connections until the backend was restarted. Fixes #2994 Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
David Anderson	830f641c6b	wgengine/magicsock: update discokeys on netmap change. Fixes #3008. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Josh Bleecher Snyder	a722e48cef	wgengine/magicsock: skip alloc test with -race Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	31c1331415	wgengine/magicsock: deflake TestReceiveFromAllocs 100 iterations isn't enough with background allocs happening apparently. 1000 seems to be reliable. Fixes #2826 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	2238814b99	wgengine/magicsock: fix crash introduced in recent cleanups Fixes #2801 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	640134421e	all: update tests to use tstest.MemLogger And give MemLogger a mutex, as one caller had, which does match the logf contract better. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	efe8020dfa	wgengine/magicsock: fix race condition in tests. AFAICT this was always present, the log read mid-execution was never safe. But it seems like the recent magicsock refactoring made the race much more likely. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	5bacbf3744	wgengine/magicsock, health, ipn/ipnstate: track DERP-advertised health And add health check errors to ipnstate.Status (tailscale status --json). Updates #2746 Updates #2775 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	bb10443edf	wgengine/wgcfg: use just the hexlified node key as the WireGuard endpoint. The node key is all magicsock needs to find the endpoint that WireGuard needs. Updates #2752 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	d00341360f	wgengine/magicsock: remove unused debug knob. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	dfd978f0f2	wgengine/magicsock: use NodeKey, not DiscoKey, as the trigger for lazy reconfig. Updates #2752 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	4c27e2fa22	wgengine/magicsock: remove Start method from Conn. Over time, other magicsock refactors have made Start effectively a no-op, except that some other functions choose to panic if called before Start. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	1a899344bd	wgengine/magicsock: don't store tailcfg.Nodes alongside endpoints. Updates #2752 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	b2181608b5	wgengine/magicsock: eagerly create endpoints in SetNetworkMap. Updates #2752 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Emmanuel T Odeke	0daa32943e	all: add (*testing.B).ReportAllocs() to every benchmark This ensures that we can properly track and catch allocation slippages that could otherwise have been missed. Fixes #2748	4 years ago
David Anderson	44d71d1e42	wgengine/magicsock: fix race in test shutdown, again. We were returning an error almost, but not quite like errConnClosed in a single codepath, which could still trip the panic on reconfig in the test logic. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	f09ede9243	wgengine/magicsock: don't configure eager WireGuard handshaking in tests. Our prod code doesn't eagerly handshake, because our disco layer enables on-demand handshaking. Configuring both peers to eagerly handshake leads to WireGuard handshake races that make TestTwoDevicePing flaky. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	86d1c4eceb	wgengine/magicsock: ignore close races even harder. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	8bacfe6a37	wgengine/magicsock: remove unused sendLogLimit limiter. Magicsock these days gets its logs limited by the global log limiter. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	e151b74f93	wgengine/magicsock: remove opts.SimulatedNetwork. It only existed to override one test-only behavior with a different test-only behavior, in both cases working around an annoying feature of our CI environments. Instead, handle that weirdness entirely in the test code, with a tweaked TestOnlyPacketListener that gets injected. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	58c1f7d51a	wgengine/magicsock: rename opts.PacketListener to TestOnlyPacketListener. The docstring said it was meant for use in tests, but it's specifically a special codepath that is _only_ used in tests, so make the claim stronger. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	8049063d35	wgengine/magicsock: rename discoEndpoint to just endpoint. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	f2d949e2db	wgengine/magicsock: fold findEndpoint into its only remaining caller. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	fe2f89deab	wgengine/magicsock: fix rare shutdown race in test. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	97693f2e42	wgengine/magicsock: delete legacy AddrSet endpoints. Instead of using the legacy codepath, teach discoEndpoint to handle peers that have a home DERP, but no disco key. We can still communicate with them, but only over DERP. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
slowy07	ac0353e982	fix: typo spelling grammar Signed-off-by: slowy07 <slowy.arfy@gmail.com>	4 years ago
Brad Fitzpatrick	37053801bb	wgengine/magicsock: restore a bit of logging on node becoming active Fixes #2695 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	39610aeb09	wgengine/magicsock: move debug knobs to their own file, compile out on iOS No need for these knobs on iOS where you can set the environment variables anyway. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	f3c96df162	ipn/ipnstate: move tailscale status "active" determination to tailscaled Fixes #2579 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	b622c60ed0	derp,wgengine/magicsock: don't assume stringer is in $PATH for go:generate Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	8a3d52e882	wgengine/magicsock: use mono.Time magicsock makes multiple calls to Now per packet. Move to mono.Now. Changing some of the calls to use package mono has a cascading effect, causing non-per-packet call sites to also switch. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	4dbbd0aa4a	cmd/addlicense: add command to add licenseheaders to generated code And use it to make our stringer invocations match the existing code. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	c179580599	wgengine/magicsock: add debug envvar to force all traffic over DERP This would have been useful during debugging DERP issues recently. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	4f4dae32dd	wgengine/magicsock: fix latent data race in test logBufWriter had no serialization. It just so happens that none of its users currently ever log concurrently. Make it safe for concurrent use. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	7e7c4c1bbe	tailcfg: break DERPNode.DERPTestPort into DERPPort & InsecureForTests The DERPTestPort int meant two things before: which port to use, and whether to disable TLS verification. Users would like to set the port without disabling TLS, so break it into two options. Updates #1264 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	92077ae78c	wgengine/magicsock: make portmapping async Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
julianknodt	506c2fe8e2	cmd/tailscale: make netcheck use active DERP map, delete static copy After allowing for custom DERP maps, it's convenient to be able to see their latency in netcheck. This adds a query to the local tailscaled for the current DERPMap. Updates #1264 Signed-off-by: julianknodt <julianknodt@gmail.com>	5 years ago
David Crawshaw	5f8ffbe166	magicsock: add SetPreferredPort method Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
Josh Bleecher Snyder	ddf6c8c729	wgengine/magicsock: delete dead code Co-authored-by: Adrian Dewhurst <adrian@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	1ece91cede	go.mod: upgrade wireguard-windows, de-fork wireguard-go Pull in the latest version of wireguard-windows. Switch to upstream wireguard-go. This requires reverting all of our import paths. Unfortunately, this has to happen at the same time. The wireguard-go change is very low risk, as that commit matches our fork almost exactly. (The only changes are import paths, CI files, and a go.mod entry.) So if there are issues as a result of this commit, the first place to look is wireguard-windows changes. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	25df067dd0	all: adapt to opaque netaddr types This commit is a mishmash of automated edits using gofmt: gofmt -r 'netaddr.IPPort{IP: a, Port: b} -> netaddr.IPPortFrom(a, b)' -w . gofmt -r 'netaddr.IPPrefix{IP: a, Port: b} -> netaddr.IPPrefixFrom(a, b)' -w . gofmt -r 'a.IP.Is4 -> a.IP().Is4' -w . gofmt -r 'a.IP.As16 -> a.IP().As16' -w . gofmt -r 'a.IP.Is6 -> a.IP().Is6' -w . gofmt -r 'a.IP.As4 -> a.IP().As4' -w . gofmt -r 'a.IP.String -> a.IP().String' -w . And regexps: \w(.)\.Port = (.) -> $1 = $1.WithPort($2) \w(.)\.IP = (.) -> $1 = $1.WithIP($2) And lots of manual fixups. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	ebcd7ab890	wgengine: remove wireguard-go DeviceOptions We no longer need them. This also removes the 32 bytes of prefix junk before endpoints. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	aacb2107ae	all: add extra information to serialized endpoints magicsock.Conn.ParseEndpoint requires a peer's public key, disco key, and legacy ip/ports in order to do its job. We currently accomplish that by: * adding the public key in our wireguard-go fork * encoding the disco key as magic hostname * using a bespoke comma-separated encoding It's a bit messy. Instead, switch to something simpler: use a json-encoded struct containing exactly the information we need, in the form we use it. Our wireguard-go fork still adds the public key to the address when it passes it to ParseEndpoint, but now the code compensating for that is just a couple of simple, well-commented lines. Once this commit is in, we can remove that part of the fork and remove the compensating code. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	5 years ago
Josh Bleecher Snyder	ddd85b9d91	wgengine/magicsock: rename discoEndpoint.wgEndpointHostPort to wgEndpoint Fields rename only. Part of the general effort to make our code agnostic about endpoint formatting. It's just a name, but it will soon be a misleading one; be more generic. Do this as a separate commit because it generates a lot of whitespace changes. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	e0bd3cc70c	wgengine/magicsock: use netaddr.MustParseIPPrefix Delete our bespoke helper. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago

... 3 4 5 6 7 ...

819 Commits (cde65dba16a24d799fafc804595b209b17481ebb)