65 Commits (c980bf01be4f6dba6e06ea733e3efefbcc590092)

Author	SHA1	Message	Date
Maisem Ali	80ba161c40	wgengine/monitor: do not ignore changes to pdp_ip* ... One current theory (among other things) on battery consumption is that magicsock is resorting to using the IPv6 over LTE even on WiFi. One thing that could explain this is that we do not get link change updates for the LTE modem as we ignore them in this list. This commit makes us not ignore changes to `pdp_ip` as a test. Updates #3363 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	136f30fc92	wgengine/monitor: split the unexpected stringification log line ... It unfortuantely gets truncated because it's too long, split it into 3 different log lines to circumvent truncation. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	8e40bfc6ea	wgengine/monitor: ignore OS-specific uninteresting interfaces ... Currently we ignore these interfaces in the darwin osMon but then would consider it interesting when checking if anything had changed. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	3ffd88a84a	wgengine/monitor: do not set timeJumped on iOS/Android ... In `(*Mon).Start` we don't run a timer to update `(*Mon).lastWall` on iOS and Android as their sleep patterns are bespoke. However, in the debounce goroutine we would notice that the the wall clock hadn't been updated since the last event would assume that a time jump had occurred. This would result in non-events being considered as major-change events. This commit makes it so that `(*Mon).timeJumped` is never set to `true` on iOS and Android. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
James Tucker	f4aad61e67	wgengine/monitor: ignore duplicate RTM_NEWADDRs ... Ignoring the events at this layer is the simpler path for right now, a broader change should follow to suppress irrelevant change events in a higher layer so as to avoid related problems with other monitoring paths on other platforms. This approach may also carry a small risk that it applies an at-most-once invariant low in the chain that could be assumed otherwise higher in the code. I adjusted the newAddrMessage type to include interface index rather than a label, as labels are not always supplied, and in particular on my test hosts they were consistently missing for ipv6 address messages. I adjusted the newAddrMessage.Addr field to be populated from Attributes.Address rather than Attributes.Local, as again for ipv6 .Local was always empty, and with ipv4 the .Address and .Local contained the same contents in each of my test environments. Update #4282 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
James Tucker	2f69c383a5	wgengine/monitor: add envknob TS_DEBUG_NETLINK ... While I trust the test behavior, I also want to assert the behavior in a reproduction environment, this envknob gives me the log information I need to do so. Update #4282 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Josh Bleecher Snyder	0868329936	all: use any instead of interface{} ... My favorite part of generics. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	86a902b201	all: adjust some log verbosity ... Updates #1548 Change-Id: Ia55f1b5dc7dfea09a08c90324226fb92cd10fa00 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Todd Neal	eeccbccd08	support running in a FreeBSD jail ... Since devd apparently can't be made to work in a FreeBSD jail fall back to polling. Fixes tailscale#2858 Signed-off-by: Todd Neal <todd@tneal.org>	3 years ago
Brad Fitzpatrick	bf1d69f25b	wgengine/monitor: fix docs on Mon.InterfaceState ... The behavior was changed in March (in 7f174e84e6) but that change forgot to update these docs. Change-Id: I79c0301692c1d13a4a26641cc5144baf48ec1360 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	ad5e04249b	wgengine/monitor: ignore adding/removing uninteresting IPs ... One of the most common "unexpected" log lines is: "network state changed, but stringification didn't" One way that this can occur is if an interesting interface (non-Tailscale, has interesting IP address) gains or loses an uninteresting IP address (link local or loopback). The fact that the interface is interesting is enough for EqualFiltered to inspect it. The fact that an IP address changed is enough for EqualFiltered to declare that the interfaces are not equal. But the State.String method reasonably declines to print any uninteresting IP addresses. As a result, the network state appears to have changed, but the stringification did not. The String method is correct; nothing interesting happened. This change fixes this by adding an IP address filter to EqualFiltered in addition to the interface filter. This lets the network monitor ignore the addition/removal of uninteresting IP addresses. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	61d0435ed9	wgengine/monitor: reduce Windows log spam ... Fixes #3345 Change-Id: Icde9c92f88f98bb3b030d39b0424a7d389bceb88 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	52737c14ac	wgengine/monitor: ignore ipsec link monitor events on iOS/macOS ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	a5da4ed981	all: gofmt with Go 1.17 ... This adds "//go:build" lines and tidies up existing "// +build" lines. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	e4fecfe31d	wgengine/{monitor,router}: restore Linux ip rules when systemd deletes them ... Thanks. Fixes #1591 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	e41193ec4d	wgengine/monitor: don't spam about Linux RTM_NEWRULE events ... The earlier 2ba36c294b started listening for ip rule changes and only cared about DELRULE events, buts its subscription included all rule events, including new ones, which meant we were then catching our own ip rule creations and logging about how they were unknown. Stop that log spam. Updates #1591 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	2ba36c294b	wgengine/monitor: subscribe to Linux ip rule events, log on rule deletes ... For debugging & working on #1591 where certain versions of systemd-networkd delete Tailscale's ip rule entries. Updates #1591 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	25df067dd0	all: adapt to opaque netaddr types ... This commit is a mishmash of automated edits using gofmt: gofmt -r 'netaddr.IPPort{IP: a, Port: b} -> netaddr.IPPortFrom(a, b)' -w . gofmt -r 'netaddr.IPPrefix{IP: a, Port: b} -> netaddr.IPPrefixFrom(a, b)' -w . gofmt -r 'a.IP.Is4 -> a.IP().Is4' -w . gofmt -r 'a.IP.As16 -> a.IP().As16' -w . gofmt -r 'a.IP.Is6 -> a.IP().Is6' -w . gofmt -r 'a.IP.As4 -> a.IP().As4' -w . gofmt -r 'a.IP.String -> a.IP().String' -w . And regexps: \w*(.*)\.Port = (.*) -> $1 = $1.WithPort($2) \w*(.*)\.IP = (.*) -> $1 = $1.WithIP($2) And lots of manual fixups. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	d5d70ae9ea	wgengine/monitor: reduce Linux log spam on down ... Fixes #1689 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Denton Gentry	3089081349	monitor/polling: reduce Cloud Run polling interval. ... Cloud Run's routes never change at runtime. Don't poll it for route changes very often. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	4 years ago
Denton Gentry	35ab4020c7	wgengine/monitor: Linux fall back to polling ... Google Cloud Run does not implement NETLINK_ROUTE RTMGRP. If initialization of the netlink socket or group membership fails, fall back to a polling implementation. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	4 years ago
Brad Fitzpatrick	a4c679e646	wgengine/monitor: on wall time jump, synthesize network change event ... ... to force rebinds of TCP connections Fixes #1555 Updates tailscale/felicity#4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	bcf571ec97	wgengine/monitor: fix OpenBSD build ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	7f174e84e6	net/interfaces: remove mutating methods, add EqualFiltered instead ... Now callers (wgengine/monitor) don't need to mutate the state to remove boring interfaces before calling State.Equal. Instead, the methods to remove boring interfaces from the State are removed, as is the reflect-using Equal method itself, and in their place is a new EqualFiltered method that takes a func predicate to match interfaces to compare. And then the FilterInteresting predicate is added for use with EqualFiltered to do the job that that wgengine/monitor previously wanted. Now wgengine/monitor can keep the full interface state around, including the "boring" interfaces, which we'll need for peerapi on macOS/iOS to bind to the interface index of the utunN device. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	0f90586da8	wgengine/monitor: skip more route messages on darwin ... Should help iOS battery life on NEProvider.wake/skip events with useless route updates that shouldn't cause re-STUNs. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	44ab0acbdb	net/portmapper, wgengine/monitor: cache gateway IP info until link changes ... Cuts down allocs & CPU in steady state (on regular STUN probes) when network is unchanging. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	fee74e7ea7	net/interfaces, wgengine/monitor: fix false positives link changes ... interfaces.State.String tries to print a concise summary of the network state, removing any interfaces that don't have any or any interesting IP addresses. On macOS and iOS, for instance, there are a ton of misc things. But the link monitor based its are-there-changes decision on interfaces.State.Equal, which just used reflect.DeepEqual, including comparing all the boring interfaces. On macOS, when turning wifi on or off, there are a ton of misc boring interface changes, resulting in hitting an earlier check I'd added on suspicion this was happening: [unexpected] network state changed, but stringification didn't This fixes that by instead adding a new interfaces.State.RemoveUninterestingInterfacesAndAddresses method that does, uh, that. Then use that in the monitor. So then when Equal is used later, it's DeepEqualing the already-cleaned version with only interesting interfaces. This makes cmd/tailscaled debug --monitor much less noisy. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Aleksandar Pesic	258d0e8d9a	wgengine/monitor: simplify the Windows monitor to make it more reliable ... Updates tailscale/tailscale#1414 Signed-off-by: Aleksandar Pesic <peske.nis@gmail.com>	4 years ago
Brad Fitzpatrick	602f92ec30	wgengine/monitor: log warning if state changes but stringification doesn't ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	ffa70a617d	wgengine{,/monitor}: restore Engine.LinkChange, add Mon.InjectEvent ... The Engine.LinkChange method was recently removed in e3df29d488 while misremembering how Android's link state mechanism worked. Rather than do some last minute rearchitecting of link state on Android before Tailscale 1.6, restore the old Engine.LinkChange hook for now so the Android client doesn't need any changes. But change how it's implemented to instead inject an event into the link monitor. Fixes #1427 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	7461dded88	wgengine/monitor: on unsupported platforms, use a polling implementation ... Not great, but lets people working on new ports get going more quickly without having to do everything up front. As the link monitor is getting used more, I felt bad having a useless implementation. Updates #815 Updates #1427 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	471f0c470a	wgengine/monitor: skip some macOS route updates, fix debounce regression ... Debound was broken way back in 5c1e443d34 and we never noticed. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	f304a45481	wgengine/monitor: add skipped failing test for Darwin route message bug ... Updates #1416 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	31721759f3	wgengine/monitor: don't return nil, nil in darwin monitor ... We used to allow that, but now it just crashes. Separately I need to figure out why it got into this path at all, which is #1416. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	24fa616e73	wgengine/monitor: make Darwin monitor shut down cleanly, add test ... Don't use os.NewFile or (*os.File).Close on the AF_ROUTE socket. It apparently does weird things to the fd and at least doesn't seem to close it. Just use the unix package. The test doesn't actually fail reliably before the fix, though. It was an attempt. But this fixes the integration tests. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	e3df29d488	wgengine{,/monitor}: move interface state fetching/comparing to monitor ... Gets it out of wgengine so the Engine isn't responsible for being a callback registration hub for it. This also removes the Engine.LinkChange method, as it's no longer necessary. The monitor tells us about changes; it doesn't seem to need any help. (Currently it was only used by Swift, but as of 14dc790137 we just do the same from Go) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	34188d93d4	wgengine/monitor: start moving interface state accessor into monitor ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	14dc790137	wgengine/monitor: make the darwin link monitor work in the sandbox too ... Previously tailscaled on macOS was running "/sbin/route monitor" as a child process, but child processes aren't allowed in the Network Extension / App Store sandbox. Instead, just do what "/sbin/route monitor" itself does: unix.Socket(unix.AF_ROUTE, unix.SOCK_RAW, 0) and read that. We also parse it now, but don't do anything with the parsed results yet. We will over time, as we have with Linux netlink messages over time. Currently any message is considered a signal to poll and see what changed. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	dda03a911e	wgengine/monitor: change API to permit multiple independent callbakcks ... Currently it assumes exactly 1 registered callback. This changes it to support 0, 1, or more than 1. This is a step towards plumbing wgengine/monitor into more places (and moving some of wgengine's interface state fetching into monitor in a later step) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	6e42430ad8	wgengine/monitor: don't log any single-IP routes added to the tailscale table. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	df5adb2e23	wgengine/monitor: on linux, also monitor for IPv6 changes. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	36189e2704	wgengine/monitor: prevent shutdown hang in darwin link monitor	4 years ago
Brad Fitzpatrick	4f7d60ad42	wgengine/monitor: add a darwin implementation for tailscaled mode ... Tangentially related to #987, #177, #594, #925, #505 Motivated by rebooting a launchd-controlled tailscaled and it going into SetNetworkUp(false) mode immediately because there really is no network up at system boot, but then it got stuck in that paused state forever, without a monitor implementation.	4 years ago
Alex Brainman	9985b3f1ed	wgengine/monitor: close closeHandle ... eccc167 introduced closeHandle which opened the handle, but never closed it. Windows handles should be closed. Updates #921 Signed-off-by: Alex Brainman <alex.brainman@gmail.com>	4 years ago
Matt Layher	bfbd6b9241	go.mod: bump github.com/mdlayher/netlink to v1.2.0 ... Signed-off-by: Matt Layher <mdlayher@gmail.com>	4 years ago
Brad Fitzpatrick	eccc167733	wgengine/monitor: fix memory corruption in Windows implementation ... I used the Windows APIs wrong previously, but it had worked just enough. Updates #921 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	22c462bd91	wgengine/monitor: fix copy/paste-o to actually monitor route changes ... Due to a copy/paste-o, we were monitoring address changes twice, and not monitoring route changes at all. Verified with 'tailscale debug --monitor' that this actually works now (while running 'route add 10.3.0.0 mask 255.255.0.0 10.0.0.1' and 'route delete (same)' back and forth in cmd.exe) In practice route changes are accompanied by address changes and this doesn't fix any known issues. I just noticed this while reading this code again. But at least the code does what it was trying to do now.	4 years ago
Brad Fitzpatrick	24d1a38e81	wgengine/monitor: add a poller to the Windows link change monitor ... The poller is slow by default, but speeds up for a bit after a network change, in case WPAD/PAC files are still loading.	4 years ago
Disconnect3d	44598e3e89	wgengine/monitor_freebsd.go: remove duplicated errcheck ... Signed-off-by: disconnect3d <dominik.b.czarnota@gmail.com>	4 years ago
Brad Fitzpatrick	dbb4c246fa	wgengine/monitor: add Windows linkchange monitor ... Updates tailscale/corp#553 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago