tailscale

Commit Graph

Author	SHA1	Message	Date
Brad Fitzpatrick	98a5116434	all: adjust some build tags for plan9 I'm not saying it works, but it compiles. Updates #5794 Change-Id: I2f3c99732e67fe57a05edb25b758d083417f083e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	10 months ago
Aaron Klotz	5fb1695bcb	util/osdiag, util/osdiag/internal/wsc: add code to probe the Windows Security Center for installed software The Windows Security Center is a component that manages the registration of security products on a Windows system. Only products that have obtained a special cert from Microsoft may register themselves using the WSC API. Practically speaking, most vendors do in fact sign up for the program as it enhances their legitimacy. From our perspective, this is useful because it gives us a high-signal source of information to query for the security products installed on the system. I've tied this query into the osdiag package and is run during bugreports. It uses COM bindings that were automatically generated by my prototype metadata processor, however that program still has a few bugs, so I had to make a few manual tweaks. I dropped those binding into an internal package because (for the moment, at least) they are effectively purpose-built for the osdiag use case. We also update the wingoes dependency to pick up BSTR. Fixes #10646 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	10 months ago
Brad Fitzpatrick	9089efea06	net/netmon: make ChangeFunc's signature take new ChangeDelta, not bool Updates #9040 Change-Id: Ia43752064a1a6ecefc8802b58d6eaa0b71cf1f84 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	10 months ago
Marwan Sulaiman	35ff5bf5a6	cmd/tailscale/cli, ipn/ipnlocal: [funnel] add stream mode Adds ability to start Funnel in the foreground and stream incoming connections. When foreground process is stopped, Funnel is turned back off for the port. Exampe usage: ``` TAILSCALE_FUNNEL_V2=on tailscale funnel 8080 ``` Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	10 months ago
Maisem Ali	8a5ec72c85	cmd/cloner: use maps.Clone and ptr.To Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	11 months ago
Brad Fitzpatrick	e8551d6b40	all: use Go 1.21 slices, maps instead of x/exp/{slices,maps} Updates #8419 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	11 months ago
Brad Fitzpatrick	239ad57446	tailcfg: move LogHeapPprof from Debug to c2n [capver 69] And delete Debug.GoroutineDumpURL, which was already in c2n. Updates #8923 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	11 months ago
Andrew Dunham	95d776bd8c	wgengine/magicsock: only cache N most recent endpoints per-Addr If a node is flapping or otherwise generating lots of STUN endpoints, we can end up caching a ton of useless values and sending them to peers. Instead, let's apply a fixed per-Addr limit of endpoints that we cache, so that we're only sending peers up to the N most recent. Updates tailscale/corp#13890 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I8079a05b44220c46da55016c0e5fc96dd2135ef8	11 months ago
Brad Fitzpatrick	a1b8d703d6	tstime/mono: remove unsafe This removes the unsafe/linkname and only uses the standard library. It's a bit slower, for now, but https://go.dev/cl/518336 should get us back. On darwin/arm64, without https://go.dev/cl/518336 pkg: tailscale.com/tstime/mono │ before │ after │ │ sec/op │ sec/op vs base │ MonoNow-8 16.20n ± 0% 19.75n ± 0% +21.92% (p=0.000 n=10) TimeNow-8 39.46n ± 0% 39.40n ± 0% -0.16% (p=0.002 n=10) geomean 25.28n 27.89n +10.33% And with it, MonoNow-8 16.34n ± 1% 16.93n ± 0% +3.67% (p=0.001 n=10) TimeNow-8 39.55n ± 15% 38.46n ± 1% -2.76% (p=0.000 n=10) geomean 25.42n 25.52n +0.41% Updates #8839 Updates tailscale/go#70 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	11 months ago
Brad Fitzpatrick	66f27c4beb	all: require Go 1.21 Updates #8419 Change-Id: I809b6a4d59d92a2ab6ec587ccbb9053376bf02c2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	11 months ago
Maisem Ali	682fd72f7b	util/testenv: add new package to hold InTest Removes duplicated code. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	11 months ago
Aaron Klotz	37925b3e7a	go.mod, cmd/tailscaled, ipn/localapi, util/osdiag, util/winutil, util/winutil/authenticode: add Windows module list to OS-specific logs that are written upon bugreport * We update wingoes to pick up new version information functionality (See pe/version.go in the https://github.com/dblohm7/wingoes repo); * We move the existing LogSupportInfo code (including necessary syscall stubs) out of util/winutil into a new package, util/osdiag, and implement the public LogSupportInfo function may be implemented for other platforms as needed; * We add a new reason argument to LogSupportInfo and wire that into localapi's bugreport implementation; * We add module information to the Windows implementation of LogSupportInfo when reason indicates a bugreport. We enumerate all loaded modules in our process, and for each one we gather debug, authenticode signature, and version information. Fixes #7802 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	11 months ago
Brad Fitzpatrick	88cc0ad9f7	util/linuxfw: remove yet-unused code to fix linux/arm64 crash The util/linuxfw/iptables.go had a bunch of code that wasn't yet used (in prep for future work) but because of its imports, ended up initializing code deep within gvisor that panicked on init on arm64 systems not using 4KB pages. This deletes the unused code to delete the imports and remove the panic. We can then cherry-pick this back to the branch and restore it later in a different way. A new test makes sure we don't regress in the future by depending on the panicking package in question. Fixes #8658 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	12 months ago
Brad Fitzpatrick	7560435eb5	tstest/deptest: add test-only package to unify negative dep tests Updates #8658 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	12 months ago
Andrew Lytvynov	7a82fd8dbe	ipn/ipnlocal: add optional support for ACME Renewal Info (ARI) (#8599 )	12 months ago
Andrew Dunham	60ab8089ff	logpolicy, various: allow overriding log function This allows sending logs from the "logpolicy" package (and associated callees) to something other than the log package. The behaviour for tailscaled remains the same, passing in log.Printf Updates #8249 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ie1d43b75fa7281933d9225bffd388462c08a5f31	12 months ago
Andrew Dunham	a7648a6723	net/dnsfallback: run recursive resolver and compare results When performing a fallback DNS query, run the recursive resolver in a separate goroutine and compare the results returned by the recursive resolver with the results we get from "regular" bootstrap DNS. This will allow us to gather data about whether the recursive DNS resolver works better, worse, or about the same as "regular" bootstrap DNS. Updates #5853 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ifa0b0cc9eeb0dccd6f7a3d91675fe44b3b34bd48	12 months ago
Maisem Ali	2e19790f61	types/views: add JSON marshal/unmarshal and AsMap to Map This allows cloning a Map as well as marshaling the Map as JSON. Updates tailscale/corp#12754 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Andrew Dunham	ab310a7f60	derp: use new net/tcpinfo package Updates #8413 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I8bf8046517195a6d42cabb32d6ec7f1f79cef860	1 year ago
KevinLiang10	243ce6ccc1	util/linuxfw: decoupling IPTables logic from linux router This change is introducing new netfilterRunner interface and moving iptables manipulation to a lower leveled iptables runner. For #391 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
phirework	fbacc0bd39	go.toolchain: switch to tailscale.go1.21 (#8415 ) Updates #8419 Signed-off-by: Jenny Zhang <jz@tailscale.com>	1 year ago
Brad Fitzpatrick	67e912824a	all: adjust some build tags for wasi A start. Updates #8320 Change-Id: I64057f977be51ba63ce635c56d67de7ecec415d1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	eefee6f149	all: use cmpx.Or where it made sense I left a few out where writing it explicitly was better for various reasons. Updates #8296 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Aaron Klotz	2aa8299c37	cmd/tailscaled, util/winutil: log our registry keys during tailscaled startup In order to improve our ability to understand the state of policies and registry settings when troubleshooting, we enumerate all values in all subkeys. x/sys/windows does not already offer this, so we need to call RegEnumValue directly. For now we're just logging this during startup, however in a future PR I plan to also trigger this code during a bugreport. I also want to log more than just registry. Fixes #8141 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	1 year ago
Joe Tsai	84c99fe0d9	logtail: be less aggressive about re-uploads (#8117 ) The retry logic was pathological in the following ways: * If we restarted the logging service, any pending uploads would be placed in a retry-loop where it depended on backoff.Backoff, which was too aggresive. It would retry failures within milliseconds, taking at least 10 retries to hit a delay of 1 second. * In the event where a logstream was rate limited, the aggressive retry logic would severely exacerbate the problem since each retry would also log an error message. It is by chance that the rate of log error spam does not happen to exceed the rate limit itself. We modify the retry logic in the following ways: * We now respect the "Retry-After" header sent by the logging service. * Lacking a "Retry-After" header, we retry after a hard-coded period of 30 to 60 seconds. This avoids the thundering-herd effect when all nodes try reconnecting to the logging service at the same time after a restart. * We do not treat a status 400 as having been uploaded. This is simply not the behavior of the logging service. Updates #tailscale/corp#11213 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	1 year ago
Chenyang Gao	b9fb8ac702	fix sys.Set(router) issue will crash the daemon in some OSs Signed-off-by: Chenyang Gao <gps949@outlook.com> in commit `6e96744`, the tsd system type has been added. Which will cause the daemon will crash on some OSs (Windows, darwin and so on). The root cause is that on those OSs, handleSubnetsInNetstack() will return true and set the conf.Router with a wrapper. Later in NewUserspaceEngine() it will do subsystem set and found that early set router mismatch to current value, then panic.	1 year ago
Brad Fitzpatrick	6e967446e4	tsd: add package with System type to unify subsystem init, discovery This is part of an effort to clean up tailscaled initialization between tailscaled, tailscaled Windows service, tsnet, and the mac GUI. Updates #8036 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Derek Kaser	0d7303b798	various: add detection and Taildrop for Unraid Updates tailscale/tailscale#8025 Signed-off-by: Derek Kaser <derek.kaser@gmail.com>	1 year ago
Brad Fitzpatrick	9e9ea6e974	go.mod: bump all deps possible that don't break the build This holds back gvisor, kubernetes, goreleaser, and esbuild, which all had breaking API changes. Updates #8043 Updates #7381 Updates #8042 (updates u-root which adds deps) Change-Id: I889759bea057cd3963037d41f608c99eb7466a5b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Charlotte Brandhorst-Satzkorn	ddb4040aa0	wgengine/magicsock: add address selection for wireguard only endpoints (#7979 ) This change introduces address selection for wireguard only endpoints. If a endpoint has not been used before, an address is randomly selected to be used based on information we know about, such as if they are able to use IPv4 or IPv6. When an address is initially selected, we also initiate a new ICMP ping to the endpoints addresses to determine which endpoint offers the best latency. This information is then used to update which endpoint we should be using based on the best possible route. If the latency is the same for a IPv4 and an IPv6 address, IPv6 will be used. Updates #7826 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	1 year ago
Mihai Parparita	7330aa593e	all: avoid repeated default interface lookups On some platforms (notably macOS and iOS) we look up the default interface to bind outgoing connections to. This is both duplicated work and results in logspam when the default interface is not available (i.e. when a phone has no connectivity, we log an error and thus cause more things that we will try to upload and fail). Fixed by passing around a netmon.Monitor to more places, so that we can use its cached interface state. Fixes #7850 Updates #7621 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	1 year ago
Mihai Parparita	4722f7e322	all: move network monitoring from wgengine/monitor to net/netmon We're using it in more and more places, and it's not really specific to our use of Wireguard (and does more just link/interface monitoring). Also removes the separate interface we had for it in sockstats -- it's a small enough package (we already pull in all of its dependencies via other paths) that it's not worth the extra complexity. Updates #7621 Updates #7850 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	1 year ago
Mihai Parparita	9a655a1d58	net/dnsfallback: more explicitly pass through logf function Redoes the approach from #5550 and #7539 to explicitly pass in the logf function, instead of having global state that can be overridden. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	1 year ago
Anton Tolchanov	8546ff98fb	tsweb: move varz handler(s) into separate modules This splits Prometheus metric handlers exposed by tsweb into two modules: - `varz.Handler` exposes Prometheus metrics generated by our expvar converter; - `promvarz.Handler` combines our expvar-converted metrics and native Prometheus metrics. By default, tsweb will use the promvarz handler, however users can keep using only the expvar converter. Specifically, `tailscaled` now uses `varz.Handler` explicitly, which avoids a dependency on the (heavyweight) Prometheus client. Updates https://github.com/tailscale/corp/issues/10205 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	1 year ago
Anton Tolchanov	11e6247d2a	tsweb: expose native Prometheus metrics in /debug/varz The handler will expose built-in process and Go metrics by default, which currently duplicate some of the expvar-proxied metrics (`goroutines` vs `go_goroutines`, `memstats` vs `go_memstats`), but as long as their names are different, Prometheus server will just scrape both. This will change /debug/varz behaviour for most tsweb binaries, but notably not for control, which configures a `tsweb.VarzHandler` [explicitly](`a5b5d5167f/cmd/tailcontrol/tailcontrol.go (L779)`) Updates https://github.com/tailscale/corp/issues/10205 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	1 year ago
Aaron Klotz	90fd04cbde	ipn/ipnlocal, util/winutil/policy: modify Windows profile migration to load legacy prefs from within tailscaled I realized that a lot of the problems that we're seeing around migration and LocalBackend state can be avoided if we drive Windows pref migration entirely from within tailscaled. By doing it this way, tailscaled can automatically perform the migration as soon as the connection with the client frontend is established. Since tailscaled is already running as LocalSystem, it already has access to the user's local AppData directory. The profile manager already knows which user is connected, so we simply need to resolve the user's prefs file and read it from there. Of course, to properly migrate this information we need to also check system policies. I moved a bunch of policy resolution code out of the GUI and into a new package in util/winutil/policy. Updates #7626 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	1 year ago
Andrew Dunham	8d3acc9235	util/sysresources, magicsock: scale DERP buffer based on system memory This adds the util/sysresources package, which currently only contains a function to return the total memory size of the current system. Then, we modify magicsock to scale the number of buffered DERP messages based on the system's available memory, ensuring that we never use a value lower than the previous constant of 32. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ib763c877de4d0d4ee88869078e7d512f6a3a148d	1 year ago
Andrew Dunham	38e4d303a2	net/tshttpproxy: don't proxy through ourselves When running a SOCKS or HTTP proxy, configure the tshttpproxy package to drop those addresses from any HTTP_PROXY or HTTPS_PROXY environment variables. Fixes #7407 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I6cd7cad7a609c639780484bad521c7514841764b	1 year ago
Maisem Ali	985535aebc	net/tstun,wgengine/*: add support for NAT to routes This adds support to make exit nodes and subnet routers work when in scenarios where NAT is required. It also updates the NATConfig to be generated from a `wgcfg.Config` as that handles merging prefs with the netmap, so it has the required information about whether an exit node is already configured and whether routes are accepted. Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Andrew Dunham	c98652c333	doctor/permissions: add new check to print process permissions Since users can run tailscaled in a variety of ways (root, non-root, non-root with process capabilities on Linux), this check will print the current process permissions to the log to aid in debugging. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ida93a206123f98271a0c664775d0baba98b330c7	1 year ago
James Tucker	a31e43f760	go.mod: bump gvisor to 20230320 for dispatcher locking Upstream improved code around an issue showing up in CI, where sometimes shutdown will race on endpoint.dispatcher being nil'd, causing a panic down stack of injectInbound. The upstream patch makes some usage more safe, but it does not itself fix the local issue. See panic in https://github.com/tailscale/tailscale/actions/runs/4548299564/jobs/8019187385#step:7:843 See fix in google/gvisor@13d7bf69d8 Updates #7715 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
valscale	74eb99aed1	derp, derphttp, magicsock: send new unknown peer frame when destination is unknown (#7552 ) * wgengine/magicsock: add envknob to send CallMeMaybe to non-existent peer For testing older client version responses to the PeerGone packet format change. Updates #4326 Signed-off-by: Val <valerie@tailscale.com> * derp: remove dead sclient struct member replaceLimiter Leftover from an previous solution to the duplicate client problem. Updates #2751 Signed-off-by: Val <valerie@tailscale.com> * derp, derp/derphttp, wgengine/magicsock: add new PeerGone message type Not Here Extend the PeerGone message type by adding a reason byte. Send a PeerGone "Not Here" message when an endpoint sends a disco message to a peer that this server has no record of. Fixes #4326 Signed-off-by: Val <valerie@tailscale.com> --------- Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Maisem Ali	8a11f76a0d	ipn/ipnlocal: fix cert storage in Kubernetes We were checking against the wrong directory, instead if we have a custom store configured just use that. Fixes #7588 Fixes #7665 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Will Norris	57a008a1e1	all: pass log IDs as the proper type rather than strings This change focuses on the backend log ID, which is the mostly commonly used in the client. Tests which don't seem to make use of the log ID just use the zero value. Signed-off-by: Will Norris <will@tailscale.com>	1 year ago
Will Norris	a1d9f65354	ipn,log: add logger for sockstat deltas Signed-off-by: Will Norris <will@tailscale.com> Co-authored-by: Melanie Warrick <warrick@tailscale.com>	1 year ago
Maisem Ali	be027a9899	control/controlclient: improve handling of concurrent lite map requests This reverts commit `6eca47b16c` and fixes forward. Previously the first ever streaming MapRequest that a client sent would also set ReadOnly to true as it didn't have any endpoints and expected/relied on the map poll to restart as soon as it got endpoints. However with `48f6c1eba4`, we would no longer restart MapRequests as frequently as we used to, so control would only ever get the first streaming MapRequest which had ReadOnly=true. Control would treat this as an uninteresting request and would not send it any further netmaps, while the client would happily stay in the map poll forever while litemap updates happened in parallel. This makes it so that we never set `ReadOnly=true` when we are doing a streaming MapRequest. This is no longer necessary either as most endpoint discovery happens over disco anyway. Co-authored-by: Andrew Dunham <andrew@du.nham.ca> Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Andrew Dunham	be107f92d3	wgengine/magicsock: track per-endpoint changes in ringbuffer This change adds a ringbuffer to each magicsock endpoint that keeps a fixed set of "changes"–debug information about what updates have been made to that endpoint. Additionally, this adds a LocalAPI endpoint and associated "debug peer-status" CLI subcommand to fetch the set of changes for a given IP or hostname. Updates tailscale/corp#9364 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I34f726a71bddd0dfa36ec05ebafffb24f6e0516a	1 year ago
Andrew Dunham	73fa7dd7af	util/slicesx: add package for generic slice functions, use Now that we're using rand.Shuffle in a few locations, create a generic shuffle function and use it instead. While we're at it, move the interleaveSlices function to the same package for use. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I0b00920e5b3eea846b6cedc30bd34d978a049fd3	1 year ago
Andrew Dunham	3f8e8b04fd	cmd/tailscale, cmd/tailscaled: move portmapper debugging into tailscale CLI The debug flag on tailscaled isn't available in the macOS App Store build, since we don't have a tailscaled binary; move it to the 'tailscale debug' CLI that is available on all platforms instead, accessed over LocalAPI. Updates #7377 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I47bffe4461e036fab577c2e51e173f4003592ff7	1 year ago
Aaron Klotz	f18beaa1e4	cmd/mkmanifest, cmd/tailscale, cmd/tailscaled: remove Windows arm32 resources from OSS Given recent changes in corp, I originally thought we could remove all of the syso files, but then I realized that we still need them so that binaries built purely from OSS (without going through corp) will still receive a manifest. We can remove the arm32 one though, since we don't support 32-bit ARM on Windows. Updates https://github.com/tailscale/corp/issues/9576 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	1 year ago

1 2 3 4 5 ...

502 Commits (c8dea67cbf813ee310a880381a77b4e7d2f4a845)