152 Commits (c61826a790a2e456ed4f92f1f481d792c61e6a05)

Author	SHA1	Message	Date
Jordan Whited	d9d9d525d9	wgengine/netstack: increase gVisor's TCP send and receive buffer sizes (#12994) ... This commit increases gVisor's TCP max send (4->6MiB) and receive (4->8MiB) buffer sizes on all platforms except iOS. These values are biased towards higher throughput on high bandwidth-delay product paths. The iperf3 results below demonstrate the effect of this commit between two Linux computers with i5-12400 CPUs. 100ms of RTT latency is introduced via Linux's traffic control network emulator queue discipline. The first set of results are from commit f0230ce prior to TCP buffer resizing. gVisor write direction: Test Complete. Summary Results: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 180 MBytes 151 Mbits/sec 0 sender [ 5] 0.00-10.10 sec 179 MBytes 149 Mbits/sec receiver gVisor read direction: Test Complete. Summary Results: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.10 sec 337 MBytes 280 Mbits/sec 20 sender [ 5] 0.00-10.00 sec 323 MBytes 271 Mbits/sec receiver The second set of results are from this commit with increased TCP buffer sizes. gVisor write direction: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 297 MBytes 249 Mbits/sec 0 sender [ 5] 0.00-10.10 sec 297 MBytes 247 Mbits/sec receiver gVisor read direction: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.10 sec 501 MBytes 416 Mbits/sec 17 sender [ 5] 0.00-10.00 sec 485 MBytes 407 Mbits/sec receiver Updates #9707 Updates tailscale/corp#22119 Signed-off-by: Jordan Whited <jordan@tailscale.com>	3 months ago
Jordan Whited	f0230ce0b5	go.mod,net/tstun,wgengine/netstack: implement gVisor TCP GRO for Linux (#12921) ... This commit implements TCP GRO for packets being written to gVisor on Linux. Windows support will follow later. The wireguard-go dependency is updated in order to make use of newly exported IP checksum functions. gVisor is updated in order to make use of newly exported stack.PacketBuffer GRO logic. TCP throughput towards gVisor, i.e. TUN write direction, is dramatically improved as a result of this commit. Benchmarks show substantial improvement, sometimes as high as 2x. High bandwidth-delay product paths remain receive window limited, bottlenecked by gVisor's default TCP receive socket buffer size. This will be addressed in a follow-on commit. The iperf3 results below demonstrate the effect of this commit between two Linux computers with i5-12400 CPUs. There is roughly ~13us of round trip latency between them. The first result is from commit 57856fc without TCP GRO. Starting Test: protocol: TCP, 1 streams, 131072 byte blocks - - - - - - - - - - - - - - - - - - - - - - - - - Test Complete. Summary Results: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 4.77 GBytes 4.10 Gbits/sec 20 sender [ 5] 0.00-10.00 sec 4.77 GBytes 4.10 Gbits/sec receiver The second result is from this commit with TCP GRO. Starting Test: protocol: TCP, 1 streams, 131072 byte blocks - - - - - - - - - - - - - - - - - - - - - - - - - Test Complete. Summary Results: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 10.6 GBytes 9.14 Gbits/sec 20 sender [ 5] 0.00-10.00 sec 10.6 GBytes 9.14 Gbits/sec receiver Updates #6816 Signed-off-by: Jordan Whited <jordan@tailscale.com>	3 months ago
Jordan Whited	7bc2ddaedc	go.mod,net/tstun,wgengine/netstack: implement gVisor TCP GSO for Linux (#12869) ... This commit implements TCP GSO for packets being read from gVisor on Linux. Windows support will follow later. The wireguard-go dependency is updated in order to make use of newly exported GSO logic from its tun package. A new gVisor stack.LinkEndpoint implementation has been established (linkEndpoint) that is loosely modeled after its predecessor (channel.Endpoint). This new implementation supports GSO of monster TCP segments up to 64K in size, whereas channel.Endpoint only supports up to 32K. linkEndpoint will also be required for GRO, which will be implemented in a follow-on commit. TCP throughput from gVisor, i.e. TUN read direction, is dramatically improved as a result of this commit. Benchmarks show substantial improvement through a wide range of RTT and loss conditions, sometimes as high as 5x. The iperf3 results below demonstrate the effect of this commit between two Linux computers with i5-12400 CPUs. There is roughly ~13us of round trip latency between them. The first result is from commit 57856fc without TCP GSO. Starting Test: protocol: TCP, 1 streams, 131072 byte blocks - - - - - - - - - - - - - - - - - - - - - - - - - Test Complete. Summary Results: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 2.51 GBytes 2.15 Gbits/sec 154 sender [ 5] 0.00-10.00 sec 2.49 GBytes 2.14 Gbits/sec receiver The second result is from this commit with TCP GSO. Starting Test: protocol: TCP, 1 streams, 131072 byte blocks - - - - - - - - - - - - - - - - - - - - - - - - - Test Complete. Summary Results: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 12.6 GBytes 10.8 Gbits/sec 6 sender [ 5] 0.00-10.00 sec 12.6 GBytes 10.8 Gbits/sec receiver Updates #6816 Signed-off-by: Jordan Whited <jordan@tailscale.com>	3 months ago
Brad Fitzpatrick	cf97cff33b	wgengine/netstack: simplify netaddrIPFromNetstackIP ... Updates #cleanup Change-Id: I66878b08a75d44170460cbf33c895277c187bd8d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Andrew Dunham	45d2f4301f	proxymap, various: distinguish between different protocols ... Previously, we were registering TCP and UDP connections in the same map, which could result in erroneously removing a mapping if one of the two connections completes while the other one is still active. Add a "proto string" argument to these functions to avoid this. Additionally, take the "proto" argument in LocalAPI, and plumb that through from the CLI and add a new LocalClient method. Updates tailscale/corp#20600 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I35d5efaefdfbf4721e315b8ca123f0c8af9125fb	5 months ago
Brad Fitzpatrick	86e0f9b912	net/ipset, wgengine/filter/filtertype: add split-out packages ... This moves NewContainsIPFunc from tsaddr to new ipset package. And wgengine/filter types gets split into wgengine/filter/filtertype, so netmap (and thus the CLI, etc) doesn't need to bring in ipset, bart, etc. Then add a test making sure the CLI deps don't regress. Updates #1278 Change-Id: Ia246d6d9502bbefbdeacc4aef1bed9c8b24f54d5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Andrew Dunham	72c8f7700b	wgengine/netstack: add test for #12448 ... This refactors the logic for determining whether a packet should be sent to the host or not into a function, and then adds tests for it. Updates #11304 Updates #12448 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ief9afa98eaffae00e21ceb7db073c61b170355e5	5 months ago
Irbe Krumina	88f2d234a4	wgengine/netstack: fix 4via6 subnet routes (#12454) ... Fix a bug where, for a subnet router that advertizes 4via6 route, all packets with a source IP matching the 4via6 address were being sent to the host itself. Instead, only send to host packets whose destination address is host's local address. Fixes tailscale/tailscale#12448 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Andrew Dunham <andrew@du.nham.ca>	5 months ago
Maisem Ali	42cfbf427c	tsnet,wgengine/netstack: add ListenPacket and tests ... This adds a new ListenPacket function on tsnet.Server which acts mostly like `net.ListenPacket`. Unlike `Server.Listen`, this requires listening on a specific IP and does not automatically listen on both V4 and V6 addresses of the Server when the IP is unspecified. To test this, it also adds UDP support to tsdial.Dialer.UserDial and plumbs it through the localapi. Then an associated test to make sure the UDP functionality works from both sides. Updates #12182 Signed-off-by: Maisem Ali <maisem@tailscale.com>	5 months ago
Andrea Gottardo	e5f67f90a2	xcode: allow ICMP ping relay on macOS + iOS platforms (#12048) ... Fixes tailscale/tailscale#10393 Fixes tailscale/corp#15412 Fixes tailscale/corp#19808 On Apple platforms, exit nodes and subnet routers have been unable to relay pings from Tailscale devices to non-Tailscale devices due to sandbox restrictions imposed on our network extensions by Apple. The sandbox prevented the code in netstack.go from spawning the `ping` process which we were using. Replace that exec call with logic to send an ICMP echo request directly, which appears to work in userspace, and not trigger a sandbox violation in the syslog. Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	6 months ago
Andrew Dunham	8f7f9ac17e	wgengine/netstack: handle 4via6 routes that are advertised by the same node ... Previously, a node that was advertising a 4via6 route wouldn't be able to make use of that same route; the packet would be delivered to Tailscale, but since we weren't accepting it in handleLocalPackets, the packet wouldn't be delivered to netstack and would never hit the 4via6 logic. Let's add that support so that usage of 4via6 is consistent regardless of where the connection is initiated from. Updates #11304 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ic28dc2e58080d76100d73b93360f4698605af7cb	6 months ago
Charlotte Brandhorst-Satzkorn	93618a3518	tailscale: update tailfs functions and vars to use drive naming (#11597) ... This change updates all tailfs functions and the majority of the tailfs variables to use the new drive naming. Updates tailscale/corp#16827 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	7 months ago
Charlotte Brandhorst-Satzkorn	14683371ee	tailscale: update tailfs file and package names (#11590) ... This change updates the tailfs file and package names to their new naming convention. Updates #tailscale/corp#16827 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	7 months ago
Andrew Dunham	7429e8912a	wgengine/netstack: fix bug with duplicate SYN packets in client limit ... This fixes a bug that was introduced in #11258 where the handling of the per-client limit didn't properly account for the fact that the gVisor TCP forwarder will return 'true' to indicate that it's handled a duplicate SYN packet, but not launch the handler goroutine. In such a case, we neither decremented our per-client limit in the wrapper function, nor did we do so in the handler function, leading to our per-client limit table slowly filling up without bound. Fix this by doing the same duplicate-tracking logic that the TCP forwarder does so we can detect such cases and appropriately decrement our in-flight counter. Updates tailscale/corp#12184 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ib6011a71d382a10d68c0802593f34b8153d06892	8 months ago
Andrew Dunham	62cf83eb92	go.mod: bump gvisor ... The `stack.PacketBufferPtr` type no longer exists; replace it with `*stack.PacketBuffer` instead. Updates #8043 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ib56ceff09166a042aa3d9b80f50b2aa2d34b3683	8 months ago
Percy Wegmann	2d5d6f5403	ipn,wgengine: only intercept TailFS traffic on quad 100 ... This fixes a regression introduced with 993acf4 and released in v1.60.0. The regression caused us to intercept all userspace traffic to port 8080 which prevented users from exposing their own services to their tailnet at port 8080. Now, we only intercept traffic to port 8080 if it's bound for 100.100.100.100 or fd7a:115c:a1e0::53. Fixes #11283 Signed-off-by: Percy Wegmann <percy@tailscale.com> (cherry picked from commit 17cd0626f3)	8 months ago
Andrew Dunham	3dd8ae2f26	net/tstun: fix spelling of "WireGuard" ... Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ida7e30f4689bc18f5f7502f53a0adb5ac3c7981a	8 months ago
Andrew Dunham	c5abbcd4b4	wgengine/netstack: add a per-client limit for in-flight TCP forwards ... This is a fun one. Right now, when a client is connecting through a subnet router, here's roughly what happens: 1. The client initiates a connection to an IP address behind a subnet router, and sends a TCP SYN 2. The subnet router gets the SYN packet from netstack, and after running through acceptTCP, starts DialContext-ing the destination IP, without accepting the connection¹ 3. The client retransmits the SYN packet a few times while the dial is in progress, until either... 4. The subnet router successfully establishes a connection to the destination IP and sends the SYN-ACK back to the client, or... 5. The subnet router times out and sends a RST to the client. 6. If the connection was successful, the client ACKs the SYN-ACK it received, and traffic starts flowing As a result, the notification code in forwardTCP never notices when a new connection attempt is aborted, and it will wait until either the connection is established, or until the OS-level connection timeout is reached and it aborts. To mitigate this, add a per-client limit on how many in-flight TCP forwarding connections can be in-progress; after this, clients will see a similar behaviour to the global limit, where new connection attempts are aborted instead of waiting. This prevents a single misbehaving client from blocking all other clients of a subnet router by ensuring that it doesn't starve the global limiter. Also, bump the global limit again to a higher value. ¹ We can't accept the connection before establishing a connection to the remote server since otherwise we'd be opening the connection and then immediately closing it, which breaks a bunch of stuff; see #5503 for more details. Updates tailscale/corp#12184 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I76e7008ddd497303d75d473f534e32309c8a5144	8 months ago
Anton Tolchanov	cd9cf93de6	wgengine/netstack: expose TCP forwarder drops via clientmetrics ... - add a clientmetric with a counter of TCP forwarder drops due to the max attempts; - fix varz metric types, as they are all counters. Updates #8210 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	8 months ago
Brad Fitzpatrick	e1bd7488d0	all: remove LenIter, use Go 1.22 range-over-int instead ... Updates #11058 Updates golang/go#65685 Change-Id: Ibb216b346e511d486271ab3d84e4546c521e4e22 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Percy Wegmann	c42a4e407a	tailfs: listen for local clients only on 100.100.100.100 ... FileSystemForLocal was listening on the node's Tailscale address, which potentially exposes the user's view of TailFS shares to other Tailnet users. Remote nodes should connect to exported shares via the peerapi. This removes that code so that FileSystemForLocal is only avaialable on 100.100.100.100:8080. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Percy Wegmann	ddcffaef7a	tailfs: disable TailFSForLocal via policy ... Adds support for node attribute tailfs:access. If this attribute is not present, Tailscale will not accept connections to the local TailFS server at 100.100.100.100:8080. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Percy Wegmann	abab0d4197	tailfs: clean up naming and package structure ... - Restyles tailfs -> tailFS - Defines interfaces for main TailFS types - Moves implemenatation of TailFS into tailfsimpl package Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Percy Wegmann	993acf4475	tailfs: initial implementation ... Add a WebDAV-based folder sharing mechanism that is exposed to local clients at 100.100.100.100:8080 and to remote peers via a new peerapi endpoint at /v0/tailfs. Add the ability to manage folder sharing via the new 'share' CLI sub-command. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
James Tucker	7e3bcd297e	go.mod,wgengine/netstack: bump gvisor ... Updates #8043 Signed-off-by: James Tucker <james@tailscale.com>	10 months ago
Andrew Dunham	7a0392a8a3	wgengine/netstack: expose gVisor metrics through expvar ... When tailscaled is run with "-debug 127.0.0.1:12345", these metrics are available at: http://localhost:12345/debug/metrics Updates #8210 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I19db6c445ac1f8344df2bc1066a3d9c9030606f8	10 months ago
Jordan Whited	5e861c3871	wgengine/netstack: disable RACK on Windows (#10402) ... Updates #9707 Signed-off-by: Jordan Whited <jordan@tailscale.com>	11 months ago
Maisem Ali	d0f2c0664b	wgengine/netstack: standardize var names in UpdateNetstackIPs ... Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	eaf8aa63fc	wgengine/netstack: remove unnecessary map in UpdateNetstackIPs ... Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	d601c81c51	wgengine/netstack: use netip.Prefix as map keys ... Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
James Tucker	7df6f8736a	wgengine/netstack: only add addresses to correct protocols ... Prior to an earlier netstack bump this code used a string conversion path to cover multiple cases of behavior seemingly checking for unspecified addresses, adding unspecified addresses to v6. The behavior is now crashy in netstack, as it is enforcing address length in various areas of the API, one in particular being address removal. As netstack is now protocol specific, we must not create invalid protocol addresses - an address is v4 or v6, and the address value contained inside must match. If a control path attempts to do something otherwise it is now logged and skipped rather than incorrect addressing being added. Fixes tailscale/corp#15377 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Andrea Barisani	f50b2a87ec	wgengine/netstack: refactor address construction and conversion ... Updates #9252 Updates #9253 Signed-off-by: Andrea Barisani <andrea@inversepath.com> Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Andrea Barisani	b5b4298325	go.mod,*: bump gvisor ... Updates #9253 Signed-off-by: Andrea Barisani <andrea@inversepath.com> Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Val	c608660d12	wgengine,net,ipn,disco: split up and define different types of MTU ... Prepare for path MTU discovery by splitting up the concept of DefaultMTU() into the concepts of the Tailscale TUN MTU, MTUs of underlying network interfaces, minimum "safe" TUN MTU, user configured TUN MTU, probed path MTU to a peer, and maximum probed MTU. Add a set of likely MTUs to probe. Updates #311 Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Val	578b357849	wgengine/netstack: use buffer pools for UDP packet forwarding ... Use buffer pools for UDP packet forwarding to prepare for increasing the forwarded UDP packet size for peer path MTU discovery. Updates #311 Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Andrew Dunham	530aaa52f1	net/dns: retry forwarder requests over TCP ... We weren't correctly retrying truncated requests to an upstream DNS server with TCP. Instead, we'd return a truncated request to the user, even if the user was querying us over TCP and thus able to handle a large response. Also, add an envknob and controlknob to allow users/us to disable this behaviour if it turns out to be buggy (✨ DNS ✨). Updates #9264 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ifb04b563839a9614c0ba03e9c564e8924c1a2bfd	1 year ago
Val	08302c0731	Revert "wgengine/netstack: use buffer pools for UDP packet forwarding" ... This reverts commit fb2f3e4741. Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Val	6cc5b272d8	Revert "wgengine,net,ipn,disco: split up and define different types of MTU" ... This reverts commit 059051c58a. Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Val	059051c58a	wgengine,net,ipn,disco: split up and define different types of MTU ... Prepare for path MTU discovery by splitting up the concept of DefaultMTU() into the concepts of the Tailscale TUN MTU, MTUs of underlying network interfaces, minimum "safe" TUN MTU, user configured TUN MTU, probed path MTU to a peer, and maximum probed MTU. Add a set of likely MTUs to probe. Updates #311 Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Val	fb2f3e4741	wgengine/netstack: use buffer pools for UDP packet forwarding ... Use buffer pools for UDP packet forwarding to prepare for increasing the forwarded UDP packet size for peer path MTU discovery. Updates #311 Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Brad Fitzpatrick	0d991249e1	types/netmap: remove NetworkMap.{Addresses,MachineStatus} ... And convert all callers over to the methods that check SelfNode. Now we don't have multiple ways to express things in tests (setting fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't have multiple ways to check those two fields (often only checking one or the other). Updates #9443 Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	3d37328af6	wgengine, proxymap: split out port mapping from Engine to new type ... (Continuing quest to remove rando stuff from the "Engine") Updates #cleanup Change-Id: I77f39902c2194410c10c054b545d70c9744250b0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	343c0f1031	wgengine{,/netstack}: remove AddNetworkMapCallback from Engine interface ... It had exactly one user: netstack. Just have LocalBackend notify netstack when here's a new netmap instead, simplifying the bloated Engine interface that has grown a bunch of non-Engine-y things. (plenty of rando stuff remains after this, but it's a start) Updates #cleanup Change-Id: I45e10ab48119e962fc4967a95167656e35b141d8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	84b94b3146	types/netmap, all: make NetworkMap.SelfNode a tailcfg.NodeView ... Updates #1909 Change-Id: I8c470cbc147129a652c1d58eac9b790691b87606 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Maisem Ali	fe95d81b43	ipn/ipnlocal,wgengine/netstack: move LocalBackend specifc serving logic to LocalBackend ... The netstack code had a bunch of logic to figure out if the LocalBackend should handle an incoming connection and then would call the function directly on LocalBackend. Move that logic to LocalBackend and refactor the methods to return conn handlers. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Denton Gentry	5b110685fb	wgengine/netstack: increase maxInFlightConnectionAttempts ... Address reports of subnet router instability when running in `--tun=userspace-networking` mode. Fixes https://github.com/tailscale/corp/issues/12184 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	1 year ago
Denton Gentry	399a80785e	wgengine/netstack: use ping6 on BSD platforms ... Various BSD-derived operating systems including macOS and FreeBSD require that ping6 be used for IPv6 destinations. The "ping" command does not understand an IPv6 destination. FreeBSD 13.x and later do handle IPv6 in the regular ping command, but also retain a ping6 command. We use ping6 on all versions of FreeBSD. Fixes https://github.com/tailscale/tailscale/issues/8225 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	1 year ago
James Tucker	fb18af5564	wgengine/netstack: fix data-race on startup ... Running tailscaled with the race detector enabled immediately fires on this field, as it is updated after first read. Updates #cleanup Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	40fa2a420c	envknob,net/tstun,wgengine: use TS_DEBUG_MTU consistently ... Noted on #5915 TS_DEBUG_MTU was not used consistently everywhere. Extract the default into a function that can apply this centrally and use it everywhere. Added envknob.Lookup{Int,Uint}Sized to make it easier to keep CodeQL happy when using converted values. Updates #5915 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	c628132b34	wgengine/netstack: do not send packets to netstack after close ... Use the local context on Impl to check for shut down state in order to drop rather than inject packets after close has begun. Netstack sets endpoint.dispatcher to nil during shutdown. After the recent adjustment in 920ec69241 we now wait for netstack to fully shutdown before we release tests. This means that we may continue to accept packets and attempt to inject them, which we must prevent in order to avoid nil pointer panic. References google/gvisor#8765 Fixes #7715 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago