tailscale

Commit Graph

Author	SHA1	Message	Date
James Tucker	76256d22d8	wgengine/router: windows: set SkipAsSource on IPv6 LL addresses Link-local addresses on the Tailscale interface are not routable. Ideally they would be removed, however, a concern exists that the operating system will attempt to re-add them which would lead to thrashing. Setting SkipAsSource attempts to avoid production of packets using the address as a source in any default behaviors. Before, in powershell: `ping (hostname)` would ping the link-local address of the Tailscale interface, and fail. After: `ping (hostname)` now pings the link-local address on the next highest priority metric local interface. Fixes #4647 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Tom	2903d42921	wgengine/router: delete hardcoded link-local address on Windows (#4740 ) Fixes #4647 It seems that Windows creates a link-local address for the TUN driver, seemingly based on the (fixed) adapter GUID. This results in a fixed MAC address, which for some reason doesn't handle loopback correctly. Given the derived link-local address is preferred for lookups (thanks LLMNR), traffic which addresses the current node by hostname uses this broken address and never works. To address this, we remove the broken link-local address from the wintun adapter. Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Brad Fitzpatrick	53588f632d	Revert "wgengine/router,util/kmod: load & log xt_mark" This reverts commit `8d6793fd70`. Reason: breaks Android build (cgo/pthreads addition) We can try again next cycle. Change-Id: I5e7e1730a8bf399a8acfce546a6d22e11fb835d5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
James Tucker	8d6793fd70	wgengine/router,util/kmod: load & log xt_mark Attempt to load the xt_mark kernel module when it is not present. If the load fails, log error information. It may be tempting to promote this failure to an error once it has been in use for some time, so as to avoid reaching an error with the iptables invocation, however, there are conditions under which the two stages may disagree - this change adds more useful breadcrumbs. Example new output from tailscaled running under my WSL2: ``` router: ensure module xt_mark: "/usr/sbin/modprobe xt_mark" failed: exit status 1; modprobe: FATAL: Module xt_mark not found in directory /lib/modules/5.10.43.3-microsoft-standard-WSL2 ``` Background: There are two places to lookup modules, one is `/proc/modules` "old", the other is `/sys/module/` "new". There was query_modules(2) in linux <2.6, alas, it is gone. In a docker container in the default configuration, you would get /proc/modules and /sys/module/ both populated. lsmod may work file, modprobe will fail with EPERM at `finit_module()` for an unpriviliged container. In a priviliged container the load may succeed, if some conditions are met. This condition should be avoided, but the code landing in this change does not attempt to avoid this scenario as it is both difficult to detect, and has a very uncertain impact. In an nspawn container `/proc/modules` is populated, but `/sys/module` does not exist. Modern `lsmod` versions will fail to gather most module information, without sysfs being populated with module information. In WSL2 modules are likely missing, as the in-use kernel typically is not provided by the distribution filesystem, and WSL does not mount in a module filesystem of its own. Notably the WSL2 kernel supports iptables marks without listing the xt_mark module in /sys/module, and /proc/modules is empty. On a recent kernel, we can ask the capabilities system about SYS_MODULE, that will help to disambiguate between the non-privileged container case and just being root. On older kernels these calls may fail. Update #4329 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Brad Fitzpatrick	0ce67ccda6	wgengine/router: make supportsV6NAT check catch more cases Updates #4459 Change-Id: Ic27621569d2739298e652769d10e38608c6012be Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	0868329936	all: use any instead of interface{} My favorite part of generics. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	26f27a620a	wgengine/router: delete legacy netfilter rule cleanup [Linux] This was just cleanup for an ancient version of Tailscale. Any such machines have upgraded since then. Change-Id: Iadcde05b37c2b867f92e02ec5d2b18bf2b8f653a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	41fd4eab5c	envknob: add new package for all the strconv.ParseBool(os.Getenv(..)) A new package can also later record/report which knobs are checked and set. It also makes the code cleaner & easier to grep for env knobs. Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	d24a8f7b5a	wgengine/router{windows}: return the output from the firewallTweaker on error. While debugging a customer issue where the firewallTweaker was failing the only message we have is `router: firewall: error adding Tailscale-Process rule: exit status 1` which is not really helpful. This will help diagnose firewall tweaking failures. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Denton Gentry	878a20df29	net/dns: add GetBaseConfig to CallbackRouter. Allow users of CallbackRouter to supply a GetBaseConfig implementation. This is expected to be used on Android, which currently lacks both a) platform support for Split-DNS and b) a way to retrieve the current DNS servers. iOS/macOS also use the CallbackRouter but have platform support for SplitDNS, so don't need getBaseConfig. Updates https://github.com/tailscale/tailscale/issues/2116 Updates https://github.com/tailscale/tailscale/issues/988 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Brad Fitzpatrick	e8db43e8fa	wgengine/router: demote TestDebugListRules fail to skip Updates #3360 Change-Id: Ic5c98ea03f3171c13ab9293a0ae74d17fd04d149 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	946dfec98a	wgengine/router: fix checkIPRuleSupportsV6 to actually use IPv6 Updates #3358 (should fix it) Updates #391 Change-Id: Ia62437dfa81247b0b5994d554cf279c3d540e4e7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	9259377a7f	wgengine/router: don't assume Linux was built with IP_MULTIPLE_TABLES Updates #3351 Updates #391 Change-Id: I7e66b686e05f3c970846513679cc62556ebe322a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	0350cf0438	wgengine{,/router}: annotate some more errors Updates #3351 Change-Id: I8b4f957d2051b3e29401bb449dbadbdada3a7c46 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d24ed3f68e	wgengine/router: add debug knob to resort to Linux "ip" command usage Tailscale 1.18 uses netlink instead of the "ip" command to program the Linux kernel. The old way was kept primarily for tests, but this also adds a TS_DEBUG_USE_IP_COMMAND environment knob to force the old way temporarily for debugging anybody who might have problems with the new way in 1.18. Updates #391 Change-Id: I0236fbfda6c9c05dcb3554fcc27ec0c86456efd9 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	3fd5f4380f	util/multierr: new package github.com/go-multierror/multierror served us well. But we need a few feature from it (implement Is), and it's not worth maintaining a fork of such a small module. Instead, I did a clean room implementation inspired by its API. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	408b0923a6	wgengine/router: remove last non-test "ip" command usage on Linux Updates #391 Change-Id: Ic2c3f8460b1e4b8d34b936a1725705fcc1effbae Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ff1954cfd9	wgengine/router: use netlink for ip rules on Linux Using temporary netlink fork in github.com/tailscale/netlink until we get the necessary changes upstream in either vishvananda/netlink or jsimonetti/rtnetlink. Updates #391 Change-Id: I6e1de96cf0750ccba53dabff670aca0c56dffb7c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	19189d7018	wgengine/router: add a addrFamily type [linux] In prep for more netlink-ification. Change-Id: I7c34a04001988107dc2583597aa4f26ddb887e91	3 years ago
Brad Fitzpatrick	7c40a5d440	wgengine/router: refactor in prep for Linux netlink-ification Pull out the list of policy routing rules to a data structure now shared between the add & delete paths, but to also be shared by the netlink paths in a future change. Updates #391 Change-Id: I119ab1c246f141d639006c808b61c585c3d67924 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	aad46bd9ff	wgengine/router: stop cleaning up old dev rules on Linux Anybody using that one old, unreleased version of Tailscale from over a year ago should've rebooted their machine by now to get various non-Tailscale security updates. :) Change-Id: If9e043cb008b20fcd6ddfd03756b3b23a9d7aeb5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d36c0d3566	wgengine/router: add debug test to enumerate rules No non-test changes. Updates #391 Change-Id: Ia88610c08e07a119d002e58250463cb4659b9f54 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	dc2fbf5877	wgengine/router: start using netlink instead of 'ip' on Linux Converts up, down, add/del addresses, add/del routes. Not yet done: rules. Updates #391 Change-Id: I02554ca07046d18f838e04a626ba99bbd35266fb Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	9310713bfb	all: fix some js/wasm compilation issues Change-Id: I05a3a4835e225a1e413ec3540a7c7e4a2d477084 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	53199738fb	wgengine: don't try to delete legacy netfilter rules on synology. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	27799a1a96	wgengine: only use AmbientCaps on DSM7+ Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	14f9c75293	wgengine/router: ignore Linux ip route error adding dup route Updates #3060 Updates #391 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
nicksherron	f01ff18b6f	all: fix spelling mistakes Signed-off-by: nicksherron <nsherron90@gmail.com>	3 years ago
Brad Fitzpatrick	4c68b7df7c	tstest: add MemLogger bytes.Buffer wrapper with Logf method We use it tons of places. Updated three at least in this PR. Another use in next commit. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Denton Gentry	6731f934a6	Revert "wgengine: actively log FlushDNS." This log is quite verbose, it was only to be left in for one unstable build to help debug a user issue. This reverts commit `1dd2552032`. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Denton Gentry	1dd2552032	wgengine: actively log FlushDNS. Intended to help in resolving customer issue with DNS caching. We currently exec `ipconfig /flushdns` from two places: - SetDNS(), which logs before invoking - here in router_windows, which doesn't We'd like to see a positive indication in logs that flushdns is being run. As this log is expected to be spammy, it is proposed to leave this in just long enough to do an unstable 1.13.x build and then revert it. They won't run an unsigned image that I build. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Maisem Ali	5c383bdf5d	wgengine/router: pass in AmbientCaps when calling `ip rule` Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Josh Bleecher Snyder	a5da4ed981	all: gofmt with Go 1.17 This adds "//go:build" lines and tidies up existing "// +build" lines. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	e4fecfe31d	wgengine/{monitor,router}: restore Linux ip rules when systemd deletes them Thanks. Fixes #1591 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ed8587f90d	wgengine/router: take a link monitor Prep for #1591 which will need to make Linux's router react to changes that the link monitor observes. The router package already depended on the monitor package transitively. Now it's explicit. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	ec52760a3d	wgengine/router_windows: support toggling local lan access when using exit nodes. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Fletcher Nichol	a49df5cfda	wgenine/router: fix OpenBSD route creation The route creation for the `tun` device was augmented in #1469 but didn't account for adding IPv4 vs. IPv6 routes. There are 2 primary changes as a result: * Ensure that either `-inet` or `-inet6` was used in the [`route(8)`](https://man.openbsd.org/route) command * Use either the `localAddr4` or `localAddr6` for the gateway argument depending which destination network is being added The basis for the approach is based on the implementation from `router_userspace_bsd.go`, including the `inet()` helper function. Fixes #2048 References #1469 Signed-off-by: Fletcher Nichol <fnichol@nichol.ca>	3 years ago
Josh Bleecher Snyder	1ece91cede	go.mod: upgrade wireguard-windows, de-fork wireguard-go Pull in the latest version of wireguard-windows. Switch to upstream wireguard-go. This requires reverting all of our import paths. Unfortunately, this has to happen at the same time. The wireguard-go change is very low risk, as that commit matches our fork almost exactly. (The only changes are import paths, CI files, and a go.mod entry.) So if there are issues as a result of this commit, the first place to look is wireguard-windows changes. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	25df067dd0	all: adapt to opaque netaddr types This commit is a mishmash of automated edits using gofmt: gofmt -r 'netaddr.IPPort{IP: a, Port: b} -> netaddr.IPPortFrom(a, b)' -w . gofmt -r 'netaddr.IPPrefix{IP: a, Port: b} -> netaddr.IPPrefixFrom(a, b)' -w . gofmt -r 'a.IP.Is4 -> a.IP().Is4' -w . gofmt -r 'a.IP.As16 -> a.IP().As16' -w . gofmt -r 'a.IP.Is6 -> a.IP().Is6' -w . gofmt -r 'a.IP.As4 -> a.IP().As4' -w . gofmt -r 'a.IP.String -> a.IP().String' -w . And regexps: \w(.)\.Port = (.) -> $1 = $1.WithPort($2) \w(.)\.IP = (.) -> $1 = $1.WithIP($2) And lots of manual fixups. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	47ebd1e9a2	wgengine/router: use net.IP.Equal instead of bytes.Equal to compare IPs Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	f91c2dfaca	wgengine/router: remove unused field Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	9360f36ebd	all: use lower-case letters at the start of error message Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	20e04418ff	net/dns: add GOOS build tags Fixes #1786 Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Maisem Ali	590792915a	wgengine/router{win}: ignore broadcast routes added by Windows when removing routes. Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Maisem Ali	4f3203556d	wgengine/router: add the Tailscale ULA route on darwin. Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Maisem Ali	1b9d8771dc	ipn/ipnlocal,wgengine/router,cmd/tailscale: add flag to allow local lan access when routing traffic via an exit node. For #1527 Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
David Anderson	19eca34f47	wgengine/router: fix FreeBSD configuration failure on the v6 /48. On FreeBSD, we add the interface IP as a /48 to work around a kernel bug, so we mustn't then try to add a /48 route to the Tailscale ULA, since that will fail as a dupe. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	4a64d2a603	net/dns: some post-review cleanups. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	68f76e9aa1	net/dns: add GetBaseConfig to OSConfigurator interface. Part of #953, required to make split DNS work on more basic platforms. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	de6dc4c510	net/dns: add a Primary field to OSConfig. Currently ignored. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago

1 2 3 4

189 Commits (c434e47f2dd345a91ba3f9555d83d818db3b8ec6)