tailscale

Commit Graph

Author	SHA1	Message	Date
James Tucker	2226bd99fa	wgengine/netstack: always set TCP keepalive Setting keepalive ensures that idle connections will eventually be closed. In userspace mode, any application configured TCP keepalive is effectively swallowed by the host kernel, and is not easy to detect. Failure to close connections when a peer tailscaled goes offline or restarts may result in an otherwise indefinite connection for any protocol endpoint that does not initiate new traffic. This patch does not take any new opinion on a sensible default for the keepalive timers, though as noted in the TODO, doing so likely deserves further consideration. Update #4522 Signed-off-by: James Tucker <james@tailscale.com> (cherry picked from commit `1aa75b1c9e`)	2 years ago
Maisem Ali	3a7f71df63	wgengine/monitor: do not ignore changes to pdp_ip* One current theory (among other things) on battery consumption is that magicsock is resorting to using the IPv6 over LTE even on WiFi. One thing that could explain this is that we do not get link change updates for the LTE modem as we ignore them in this list. This commit makes us not ignore changes to `pdp_ip` as a test. Updates #3363 Signed-off-by: Maisem Ali <maisem@tailscale.com> (cherry picked from commit `80ba161c40`)	2 years ago
Maisem Ali	2265587d38	wgengine/{,magicsock}: add metrics for rebinds and restuns Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	910ae68e0b	util/mak: move tailssh's mapSet into a new package for reuse elsewhere Change-Id: Idfe95db82275fd2be6ca88f245830731a0d5aecf Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	53588f632d	Revert "wgengine/router,util/kmod: load & log xt_mark" This reverts commit `8d6793fd70`. Reason: breaks Android build (cgo/pthreads addition) We can try again next cycle. Change-Id: I5e7e1730a8bf399a8acfce546a6d22e11fb835d5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
James Tucker	8d6793fd70	wgengine/router,util/kmod: load & log xt_mark Attempt to load the xt_mark kernel module when it is not present. If the load fails, log error information. It may be tempting to promote this failure to an error once it has been in use for some time, so as to avoid reaching an error with the iptables invocation, however, there are conditions under which the two stages may disagree - this change adds more useful breadcrumbs. Example new output from tailscaled running under my WSL2: ``` router: ensure module xt_mark: "/usr/sbin/modprobe xt_mark" failed: exit status 1; modprobe: FATAL: Module xt_mark not found in directory /lib/modules/5.10.43.3-microsoft-standard-WSL2 ``` Background: There are two places to lookup modules, one is `/proc/modules` "old", the other is `/sys/module/` "new". There was query_modules(2) in linux <2.6, alas, it is gone. In a docker container in the default configuration, you would get /proc/modules and /sys/module/ both populated. lsmod may work file, modprobe will fail with EPERM at `finit_module()` for an unpriviliged container. In a priviliged container the load may succeed, if some conditions are met. This condition should be avoided, but the code landing in this change does not attempt to avoid this scenario as it is both difficult to detect, and has a very uncertain impact. In an nspawn container `/proc/modules` is populated, but `/sys/module` does not exist. Modern `lsmod` versions will fail to gather most module information, without sysfs being populated with module information. In WSL2 modules are likely missing, as the in-use kernel typically is not provided by the distribution filesystem, and WSL does not mount in a module filesystem of its own. Notably the WSL2 kernel supports iptables marks without listing the xt_mark module in /sys/module, and /proc/modules is empty. On a recent kernel, we can ask the capabilities system about SYS_MODULE, that will help to disambiguate between the non-privileged container case and just being root. On older kernels these calls may fail. Update #4329 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Maisem Ali	136f30fc92	wgengine/monitor: split the unexpected stringification log line It unfortuantely gets truncated because it's too long, split it into 3 different log lines to circumvent truncation. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	8e40bfc6ea	wgengine/monitor: ignore OS-specific uninteresting interfaces Currently we ignore these interfaces in the darwin osMon but then would consider it interesting when checking if anything had changed. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	0ce67ccda6	wgengine/router: make supportsV6NAT check catch more cases Updates #4459 Change-Id: Ic27621569d2739298e652769d10e38608c6012be Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	3ffd88a84a	wgengine/monitor: do not set timeJumped on iOS/Android In `(Mon).Start` we don't run a timer to update `(Mon).lastWall` on iOS and Android as their sleep patterns are bespoke. However, in the debounce goroutine we would notice that the the wall clock hadn't been updated since the last event would assume that a time jump had occurred. This would result in non-events being considered as major-change events. This commit makes it so that `(*Mon).timeJumped` is never set to `true` on iOS and Android. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	16f3520089	all: add arbitrary capability support Updates #4217 RELNOTE=start of WhoIsResponse capability support Change-Id: I6522998a911fe49e2f003077dad6164c017eed9b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	8ee044ea4a	ssh/tailssh: make the SSH server a singleton, register with LocalBackend Remove the weird netstack -> tailssh dependency and instead have tailssh register itself with ipnlocal when linked. This makes tailssh.server a singleton, so we can have a global map of all sessions. Updates #3802 Change-Id: Iad5caec3a26a33011796878ab66b8e7b49339f29 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	da14e024a8	tailcfg, ssh/tailssh: optionally support SSH public keys in wire policy And clean up logging. Updates #3802 Change-Id: I756dc2d579a16757537142283d791f1d0319f4f0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	3ae701f0eb	net/tsaddr, wgengine/netstack: add IPv6 range that forwards to site-relative IPv4 This defines a new magic IPv6 prefix, fd7a:115c:a1e0:b1a::/64, a subset of our existing /48, where the final 32 bits are an IPv4 address, and the middle 32 bits are a user-chosen "site ID". (which must currently be 0000:00xx; the top 3 bytes must be zero for now) e.g., I can say my home LAN's "site ID" is "0000:00bb" and then advertise its 10.2.0.0/16 IPv4 range via IPv6, like: tailscale up --advertise-routes=fd7a:115c:a1e0:b1a::bb:10.2.0.0/112 (112 being /128 minuse the /96 v6 prefix length) Then people in my tailnet can: $ curl '[fd7a:115c:a1e0:b1a::bb:10.2.0.230]' <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" .... Updates #3616, etc RELNOTE=initial support for TS IPv6 addresses to route v4 "via" specific nodes Change-Id: I9b49b6ad10410a24b5866b9fbc69d3cae1f600ef Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
James Tucker	f4aad61e67	wgengine/monitor: ignore duplicate RTM_NEWADDRs Ignoring the events at this layer is the simpler path for right now, a broader change should follow to suppress irrelevant change events in a higher layer so as to avoid related problems with other monitoring paths on other platforms. This approach may also carry a small risk that it applies an at-most-once invariant low in the chain that could be assumed otherwise higher in the code. I adjusted the newAddrMessage type to include interface index rather than a label, as labels are not always supplied, and in particular on my test hosts they were consistently missing for ipv6 address messages. I adjusted the newAddrMessage.Addr field to be populated from Attributes.Address rather than Attributes.Local, as again for ipv6 .Local was always empty, and with ipv4 the .Address and .Local contained the same contents in each of my test environments. Update #4282 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	2f69c383a5	wgengine/monitor: add envknob TS_DEBUG_NETLINK While I trust the test behavior, I also want to assert the behavior in a reproduction environment, this envknob gives me the log information I need to do so. Update #4282 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Tom	24bdcbe5c7	net/dns, net/dns/resolver, wgengine: refactor DNS request path (#4364 ) * net/dns, net/dns/resolver, wgengine: refactor DNS request path Previously, method calls into the DNS manager/resolver types handled DNS requests rather than DNS packets. This is fine for UDP as one packet corresponds to one request or response, however will not suit an implementation that supports DNS over TCP. To support PRs implementing this in the future, wgengine delegates all handling/construction of packets to the magic DNS endpoint, to the DNS types themselves. Handling IP packets at this level enables future support for both UDP and TCP. Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
James Tucker	c6ac29bcc4	wgengine/netstack: disable refsvfs2 leak tracking (#4378 ) In addition an envknob (TS_DEBUG_NETSTACK_LEAK_MODE) now provides access to set leak tracking to more useful values. Fixes #4309 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Brad Fitzpatrick	e4d8d5e78b	net/packet, wgengine/netstack: remove workaround for old gvisor ECN bug Fixes #2642 Change-Id: Ic02251d24a4109679645d1c8336e0f961d0cce13 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	6fecc16c3b	ipn/ipnlocal: do not process old status messages received out of order When `setWgengineStatus` is invoked concurrently from multiple goroutines, it is possible that the call invoked with a newer status is processed before a call with an older status. e.g. a status that has endpoints might be followed by a status without endpoints. This causes unnecessary work in the engine and can result in packet loss. This patch adds an `AsOf time.Time` field to the status to specifiy when the status was calculated, which later allows `setWgengineStatus` to ignore any status messages it receives that are older than the one it has already processed. Updates tailscale/corp#2579 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
James Tucker	445c04c938	wgengine: inject packetbuffers rather than bytes (#4220 ) Plumb the outbound injection path to allow passing netstack PacketBuffers down to the tun Read, where they are decref'd to enable buffer re-use. This removes one packet alloc & copy, and reduces GC pressure by pooling outbound injected packets. Fixes #2741 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Brad Fitzpatrick	f2041c9088	all: use strings.Cut even more Change-Id: I943ce72c6f339589235bddbe10d07799c4e37979 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Josh Bleecher Snyder	0868329936	all: use any instead of interface{} My favorite part of generics. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	2 years ago
Josh Bleecher Snyder	5f176f24db	go.mod: upgrade to the latest wireguard-go This pulls in a handful of fixes and an update to Go 1.18. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	2 years ago
Brad Fitzpatrick	61ee72940c	all: use Go 1.18's strings.Cut More remain. Change-Id: I6ec562cc1f687600758deae1c9d7dbd0d04004cb Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Josh Bleecher Snyder	1b57b0380d	wgengine/magicsock: remove final alloc from ReceiveFrom And now that we don't have to play escape analysis and inlining games, simplify the code. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	2 years ago
Josh Bleecher Snyder	08cf54f386	wgengine/magicsock: fix goMajorVersion for 1.18 ts release The version string changed slightly. Adapt. And always check the current Go version to prevent future accidental regressions. I would have missed this one had I not explicitly manually checked it. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	2 years ago
Maisem Ali	07f48a7bfe	wgengine: handle nil netmaps when assigning isSubnetRouter. Fixes tailscale/coral#51 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	26f27a620a	wgengine/router: delete legacy netfilter rule cleanup [Linux] This was just cleanup for an ancient version of Tailscale. Any such machines have upgraded since then. Change-Id: Iadcde05b37c2b867f92e02ec5d2b18bf2b8f653a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	c9eca9451a	ssh: make it build on darwin For local dev testing initially. Product-wise, it'll probably only be workable on the two unsandboxed builds. Updates #3802 Change-Id: Ic352f966e7fb29aff897217d79b383131bf3f92b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	72d8672ef7	tailcfg: make Node.Hostinfo a HostinfoView Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	1b87e025e9	ssh/tailssh: move SSH code from wgengine/netstack to this new package Still largely incomplete, but in a better home now. Updates #3802 Change-Id: I46c5ffdeb12e306879af801b06266839157bc624 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	2db6cd1025	ipn/ipnlocal, wgengine/magicsock, logpolicy: quiet more logs Updates #1548 Change-Id: Ied169f872e93be2857890211f2e018307d4aeadc Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	86a902b201	all: adjust some log verbosity Updates #1548 Change-Id: Ia55f1b5dc7dfea09a08c90324226fb92cd10fa00 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	6eed2811b2	wgengine/netstack: start supporting different SSH users Updates #3802 Change-Id: I44de6897e36b1362cd74c9b10c9cbfeb9abc3dbc Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	bd90781b34	ipn/ipnlocal, wgengine/netstack: use netstack for peerapi server We're finding a bunch of host operating systems/firewalls interact poorly with peerapi. We either get ICMP errors from the host or users need to run commands to allow the peerapi port: https://github.com/tailscale/tailscale/issues/3842#issuecomment-1025133727 ... even though the peerapi should be an internal implementation detail. Rather than fight the host OS & firewalls, this change handles the server side of peerapi entirely in netstack (except on iOS), so it never makes its way to the host OS where it might be messed with. Two main downsides are: 1) netstack isn't as fast, but we don't really need speed for peerapi. And actually, with fewer trips to/from the kernel, we might actually make up for some of the netstack performance loss by staying in userspace. 2) tcpdump / Wireshark etc packet captures will no longer see the peerapi traffic. Oh well. Crawshaw's been wanting to add packet capture server support to tailscaled, so we'll probably do that sooner now. A future change might also then use peerapi for the client-side (except on iOS). Updates #3842 (probably fixes, as well as many exit node issues I bet) Change-Id: Ibc25edbb895dc083d1f07bd3cab614134705aa39 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	730aa1c89c	derp/derphttp, wgengine/magicsock: prefer IPv6 to DERPs when IPv6 works Fixes #3838 Change-Id: Ie47a2a30c7e8e431512824798d2355006d72fb6a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	1af26222b6	go.mod: bump netstack, switch to upstream netstack Now that Go 1.17 has module graph pruning (https://go.dev/doc/go1.17#go-command), we should be able to use upstream netstack without breaking our private repo's build that then depends on the tailscale.com Go module. This is that experiment. Updates #1518 (the original bug to break out netstack to own module) Updates #2642 (this updates netstack, but doesn't remove workaround) Change-Id: I27a252c74a517053462e5250db09f379de8ac8ff Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
David Anderson	7a18fe3dca	wgengine/magicsock: make debugUseDerpRoute an opt.Bool. Can still be constant, just needs the extra methods. Fixes #3812 Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
Brad Fitzpatrick	f3c0023add	wgengine/netstack: add an SSH server experiment Disabled by default. To use, run tailscaled with: TS_SSH_ALLOW_LOGIN=you@bar.com And enable with: $ TAILSCALE_USE_WIP_CODE=true tailscale up --ssh=true Then ssh [any-user]@[your-tailscale-ip] for a root bash shell. (both the "root" and "bash" part are temporary) Updates #3802 Change-Id: I268f8c3c95c8eed5f3231d712a5dc89615a406f0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	41fd4eab5c	envknob: add new package for all the strconv.ParseBool(os.Getenv(..)) A new package can also later record/report which knobs are checked and set. It also makes the code cleaner & easier to grep for env knobs. Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	c64af5e676	wgengine/netstack: clear TCP ECN bits before giving to gvisor Updates #2642 Change-Id: Ic219442a2656dd9dc99ae1dd91e907fd3d924987 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Josh Bleecher Snyder	de4696da10	wgengine/magicsock: fix deadlock on shutdown This fixes a deadlock on shutdown. One goroutine is waiting to send on c.derpRecvCh before unlocking c.mu. The other goroutine is waiting to lock c.mu before receiving from c.derpRecvCh. #3736 has a more detailed explanation of the sequence of events. Fixes #3736 Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	2 years ago
Brad Fitzpatrick	185825df11	wgengine/netstack: add a missing refcount decrement after packet injection Fixes #3762 Updates #3745 (probably fixes?) Change-Id: I1d3f0590fd5b8adfbc9110bc45ff717bb9e79aae Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	790e41645b	wgengine/netstack: add an Impl.Close method for tests Change-Id: Idbb3fd6d749d3e4effdf96de77a1106584822fef Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	166fe3fb12	wgengine/netstack: add missing error logging in a RST case Updates #2642 Change-Id: I9f2f8fd28fc980208b0739eb9caf9db7b0977c09 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	6be48dfcc6	wgengine/netstack: fix netstack ping timeout on darwin -W is milliseconds on darwin, not seconds, and empirically it's milliseconds after a 1 second base. Change-Id: I2520619e6699d9c505d9645ce4dfee4973555227 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	5404a0557b	wgengine/magicsock: remove a per-DERP-packet map lookup in common case Updates #150 Change-Id: Iffb6eccbe7ca97af97d29be63b7e37d487b3ba28 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	5a317d312d	wgengine/magicsock: enable DERP Return Path Optimization (DRPO) Turning this on at the beginning of the 1.21.x dev cycle, for 1.22. Updates #150 Change-Id: I1de567cfe0be3df5227087de196ab88e60c9eb56 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c6c39930cc	wgengine/magicsock: fix lock ordering deadlock with derphttp Fixes #3726 Change-Id: I32631a44dcc1da3ae47764728ec11ace1c78190d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago

1 2 3 4 5 ...

1102 Commits (c0746cf25c0f555ffd6a14da6c0f411a79170730)