101 Commits (bbe194c80d531c5f88010d4e31e17c060a8125e7)

Author	SHA1	Message	Date
Irbe Krumina	bbe194c80d	cmd/k8s-operator: correctly determine cluster domain (#11512) ... Kubernetes cluster domain defaults to 'cluster.local', but can also be customized. We need to determine cluster domain to set up in-cluster forwarding to our egress proxies. This was previously hardcoded to 'cluster.local', so was the egress proxies were not usable in clusters with custom domains. This PR ensures that we attempt to determine the cluster domain by parsing /etc/resolv.conf. In case the cluster domain cannot be determined from /etc/resolv.conf, we fall back to 'cluster.local'. Updates tailscale/tailscale#10399,tailscale/tailscale#11445 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	2 months ago
Brad Fitzpatrick	7c1d6e35a5	all: use Go 1.22 range-over-int ... Updates #11058 Change-Id: I35e7ef9b90e83cac04ca93fd964ad00ed5b48430 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Irbe Krumina	26f9bbc02b	cmd/k8s-operator,k8s-operator: document tailscale.com Custom Resource Definitions better. (#11665) ... Updates tailscale/tailscale#10880 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	2 months ago
Irbe Krumina	38fb23f120	cmd/k8s-operator,k8s-operator: allow users to configure proxy env vars via ProxyClass (#11743) ... Adds new ProxyClass.spec.statefulSet.pod.{tailscaleContainer,tailscaleInitContainer}.Env field that allow users to provide key, value pairs that will be set as env vars for the respective containers. Allow overriding all containerboot env vars, but warn that this is not supported and might break (in docs + a warning when validating ProxyClass). Updates tailscale/tailscale#10709 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	2 months ago
Irbe Krumina	231e44e742	Revert "cmd/{k8s-nameserver,k8s-operator},k8s-operator: add a kube nameserver, make operator deploy it (#11017)" (#11669) ... Temporarily reverting this PR to avoid releasing half finished featue. This reverts commit 9e2f58f846. Signed-off-by: Irbe Krumina <irbe@tailscale.com>	3 months ago
Irbe Krumina	9b5176c4d9	cmd/k8s-operator: fix failing tests (#11541) ... Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	3 months ago
Irbe Krumina	9e2f58f846	cmd/{k8s-nameserver,k8s-operator},k8s-operator: add a kube nameserver, make operator deploy it (#11017) ... * cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster. Adds a simple nameserver that can respond to A record queries for ts.net DNS names. It can respond to queries from in-memory records, populated from a ConfigMap mounted at /config. It dynamically updates its records as the ConfigMap contents changes. It will respond with NXDOMAIN to queries for any other record types (AAAA to be implemented in the future). It can respond to queries over UDP or TCP. It runs a miekg/dns DNS server with a single registered handler for ts.net domain names. Queries for other domain names will be refused. The intended use of this is: 1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet services exposed via Tailscale operator egress over HTTPS 2) to allow non-tailnet cluster workloads to talk to workloads in the same cluster that have been exposed to tailnet over their MagicDNS names but on their cluster IPs. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com> * cmd/k8s-operator/deploy/crds,k8s-operator: add DNSConfig CustomResource Definition DNSConfig CRD can be used to configure the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster. Signed-off-by: Irbe Krumina <irbe@tailscale.com> * cmd/k8s-operator,k8s-operator: optionally reconcile nameserver resources Adds a new reconciler that reconciles DNSConfig resources. If a DNSConfig is deployed to cluster, the reconciler creates kube nameserver resources. This reconciler is only responsible for creating nameserver resources and not for populating nameserver's records. Signed-off-by: Irbe Krumina <irbe@tailscale.com> * cmd/{k8s-operator,k8s-nameserver}: generate DNSConfig CRD for charts, append to static manifests Signed-off-by: Irbe Krumina <irbe@tailscale.com> --------- Signed-off-by: Irbe Krumina <irbe@tailscale.com>	3 months ago
Irbe Krumina	4cbef20569	cmd/k8s-operator: redact auth key from debug logs (#11523) ... Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	3 months ago
Chris Milson-Tokunaga	b6dfd7443a	Change type of installCRDs (#11478) ... Including the double quotes (`"`) around the value made it appear like the helm chart should expect a string value for `installCRDs`. Signed-off-by: Chris Milson-Tokunaga <chris.w.milson@gmail.com>	3 months ago
Irbe Krumina	b0c3e6f6c5	cmd/k8s-operator,ipn/conf.go: fix --accept-routes for proxies (#11453) ... Fix a bug where all proxies got configured with --accept-routes set to true. The bug was introduced in https://github.com/tailscale/tailscale/pull/11238. Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	3 months ago
Irbe Krumina	95dcc1745b	cmd/k8s-operator: reconcile tailscale Ingresses when their backend Services change. (#11255) ... This is so that if a backend Service gets created after the Ingress, it gets picked up by the operator. Updates tailscale/tailscale#11251 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Anton Tolchanov <1687799+knyar@users.noreply.github.com>	4 months ago
Irbe Krumina	303125d96d	cmd/k8s-operator: configure all proxies with declarative config (#11238) ... Containerboot container created for operator's ingress and egress proxies are now always configured by passing a configfile to tailscaled (tailscaled --config <configfile-path>. It does not run 'tailscale set' or 'tailscale up'. Upgrading existing setups to this version as well as downgrading existing setups at this version works. Updates tailscale/tailscale#10869 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	4 months ago
Irbe Krumina	45d27fafd6	cmd/k8s-operator,k8s-operator,go.{mod,sum},tstest/tools: add Tailscale Kubernetes operator API docs (#11246) ... Add logic to autogenerate CRD docs. .github/workflows/kubemanifests.yaml CI workflow will fail if the doc is out of date with regard to the current CRDs. Docs can be refreshed by running make kube-generate-all. Updates tailscale/tailscale#11023 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	4 months ago
Irbe Krumina	5bd19fd3e3	cmd/k8s-operator,k8s-operator: proxy configuration mechanism via a new ProxyClass custom resource (#11074) ... * cmd/k8s-operator,k8s-operator: introduce proxy configuration mechanism via ProxyClass custom resource. ProxyClass custom resource can be used to specify customizations for the proxy resources created by the operator. Add a reconciler that validates ProxyClass resources and sets a Ready condition to True or False with a corresponding reason and message. This is required because some fields (labels and annotations) require complex validations that cannot be performed at custom resource apply time. Reconcilers that use the ProxyClass to configure proxy resources are expected to verify that the ProxyClass is Ready and not proceed with resource creation if configuration from a ProxyClass that is not yet Ready is required. If a tailscale ingress/egress Service is annotated with a tailscale.com/proxy-class annotation, look up the corresponding ProxyClass and, if it is Ready, apply the configuration from the ProxyClass to the proxy's StatefulSet. If a tailscale Ingress has a tailscale.com/proxy-class annotation and the referenced ProxyClass custom resource is available and Ready, apply configuration from the ProxyClass to the proxy resources that will be created for the Ingress. Add a new .proxyClass field to the Connector spec. If connector.spec.proxyClass is set to a ProxyClass that is available and Ready, apply configuration from the ProxyClass to the proxy resources created for the Connector. Ensure that when Helm chart is packaged, the ProxyClass yaml is added to chart templates. Ensure that static manifest generator adds ProxyClass yaml to operator.yaml. Regenerate operator.yaml Signed-off-by: Irbe Krumina <irbe@tailscale.com>	5 months ago
Irbe Krumina	a6cc2fdc3e	cmd/{containerboot,k8s-operator/deploy/manifests}: optionally allow proxying cluster traffic to a cluster target via ingress proxy (#11036) ... * cmd/containerboot,cmd/k8s-operator/deploy/manifests: optionally forward cluster traffic via ingress proxy. If a tailscale Ingress has tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation, configure the associated ingress proxy to have its tailscale serve proxy to listen on Pod's IP address. This ensures that cluster traffic too can be forwarded via this proxy to the ingress backend(s). In containerboot, if EXPERIMENTAL_PROXY_CLUSTER_TRAFFIC_VIA_INGRESS is set to true and the node is Kubernetes operator ingress proxy configured via Ingress, make sure that traffic from within the cluster can be proxied to the ingress target. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	5 months ago
Irbe Krumina	370ec6b46b	cmd/k8s-operator: don't proceed with Ingress that has no valid backends (#10919) ... Do not provision resources for a tailscale Ingress that has no valid backends. Updates tailscale/tailscale#10910 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	5 months ago
ChandonPierre	2ce596ea7a	cmd/k8s-operator/deploy: allow modifying operator tags via Helm values ... Updates tailscale/tailscale#10659 Signed-off-by: Chandon Pierre <cpierre@coreweave.com>	5 months ago
Joe Tsai	c25968e1c5	all: make use of ctxkey everywhere (#10846) ... Also perform minor cleanups on the ctxkey package itself. Provide guidance on when to use ctxkey.Key[T] over ctxkey.New. Also, allow for interface kinds because the value wrapping trick also happens to fix edge cases with interfaces in Go. Updates #cleanup Signed-off-by: Joe Tsai <joetsai@digital-static.net>	5 months ago
Irbe Krumina	1c3c3d6752	cmd/k8s-operator: warn if unsupported Ingress Exact path type is used. (#10865) ... To reduce the likelihood of breaking users, if we implement stricter Exact path type matching in the future. Updates tailscale/tailscale#10730 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	5 months ago
Irbe Krumina	50b52dbd7d	cmd/k8s-operator: sync StatefulSet labels to their Pods (#10861) ... So that users have predictable label values to use when configuring network policies. Updates tailscale/tailscale#10854 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	5 months ago
Irbe Krumina	d0492fdee5	cmd/k8s-operator: adds a tailscale IngressClass resource, prints warning if class not found. (#10823) ... * cmd/k8s-operator/deploy: deploy a Tailscale IngressClass resource. Some Ingress validating webhooks reject Ingresses with .spec.ingressClassName for which there is no matching IngressClass. Additionally, validate that the expected IngressClass is present, when parsing a tailscale `Ingress`. We currently do not utilize the IngressClass, however we might in the future at which point we might start requiring that the right class for this controller instance actually exists. Updates tailscale/tailscale#10820 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Anton Tolchanov <anton@tailscale.com>	5 months ago
Irbe Krumina	169778e23b	cmd/k8s-operator: minor fix in name gen (#10830) ... Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Irbe Krumina	5cc1bfe82d	cmd/k8s-operator: remove configuration knob for Connector (#10791) ... The configuration knob (that defaulted to Connector being disabled) was added largely because the Connector CRD had to be installed in a separate step. Now when the CRD has been added to both chart and static manifest, we can have it on by default. Updates tailscale/tailscale#10878 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Irbe Krumina	469af614b0	cmd/k8s-operator: fix base truncating for extra long Service names (#10825) ... cmd/k8s-operator: fix base truncating for extra long Service names StatefulSet names for ingress/egress proxies are calculated using Kubernetes name generator and the parent resource name as a base. The name generator also cuts the base, but has a higher max cap. This commit fixes a bug where, if we get a shortened base back from the generator, we cut off too little as the base that we have cut will be passed into the generator again, which will then itself cut less because the base is shorter- so we end up with a too long name again. Updates tailscale/tailscale#10807 Co-authored-by: Maisem Ali <maisem@tailscale.com> Signed-off-by: Irbe Krumina <irbekrm@gmail.com>	6 months ago
Irbe Krumina	35f49ac99e	cmd/k8s-operator: add Connector CRD to Helm chart and static manifests (#10775) ... cmd/k8s-operator: add CRD to chart and static manifest Add functionality to insert CRD to chart at package time. Insert CRD to static manifests as this is where they are currently consumed from. Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Irbe Krumina	05093ea7d9	cmd/k8s-operator,k8s-operator: allow the operator to deploy exit nodes via Connector custom resource (#10724) ... cmd/k8s-operator/deploy/crds,k8s-operator/apis/v1alpha1: allow to define an exit node via Connector CR. Make it possible to define an exit node to be deployed to a Kubernetes cluster via Connector Custom resource. Also changes to Connector API so that one Connector corresponds to one Tailnet node that can be either a subnet router or an exit node or both. The Kubernetes operator parses Connector custom resource and, if .spec.isExitNode is set, configures that Tailscale node deployed for that connector as an exit node. Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Anton Tolchanov <anton@tailscale.com>	6 months ago
Irbe Krumina	38b4eb9419	cmd/k8s-operator/deploy/chart: document passing multiple proxy tags + log level values (#10624) ... Updates #cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Irbe Krumina	1a08ea5990	cmd/k8s-operator: operator can create subnetrouter (#9505) ... * k8s-operator,cmd/k8s-operator,Makefile,scripts,.github/workflows: add Connector kube CRD. Connector CRD allows users to configure the Tailscale Kubernetes operator to deploy a subnet router to expose cluster CIDRs or other CIDRs available from within the cluster to their tailnet. Also adds various CRD related machinery to generate CRD YAML, deep copy implementations etc. Engineers will now have to run 'make kube-generate-all` after changing kube files to ensure that all generated files are up to date. * cmd/k8s-operator,k8s-operator: reconcile Connector resources Reconcile Connector resources, create/delete subnetrouter resources in response to changes to Connector(s). Connector reconciler will not be started unless ENABLE_CONNECTOR env var is set to true. This means that users who don't want to use the alpha Connector custom resource don't have to install the Connector CRD to their cluster. For users who do want to use it the flow is: - install the CRD - install the operator (via Helm chart or using static manifests). For Helm users set .values.enableConnector to true, for static manifest users, set ENABLE_CONNECTOR to true in the static manifest. Updates tailscale/tailscale#502 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Maisem Ali	fb632036e3	cmd/k8s-operator: drop https:// in capName ... Add the new format but keep respecting the old one. Updates #4217 Signed-off-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Irbe Krumina	49fd0a62c9	cmd/k8s-operator: generate static kube manifests from the Helm chart. (#10436) ... * cmd/k8s-operator: generate static manifests from Helm charts This is done to ensure that there is a single source of truth for the operator kube manifests. Also adds linux node selector to the static manifests as this was added as a default to the Helm chart. Static manifests can now be generated by running `go generate tailscale.com/cmd/k8s-operator`. Updates tailscale/tailscale#9222 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	18ceb4e1f6	cmd/{containerboot,k8s-operator}: allow users to define tailnet egress target by FQDN (#10360) ... * cmd/containerboot: proxy traffic to tailnet target defined by FQDN Add a new Service annotation tailscale.com/tailnet-fqdn that users can use to specify a tailnet target for which an egress proxy should be deployed in the cluster. Updates tailscale/tailscale#10280 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Gabriel Martinez	128d3ad1a9	cmd/k8s-operator: helm chart add missing keys (#10296) ... * cmd/k8s-operator: add missing keys to Helm values file Updates #10182 Signed-off-by: Gabriel Martinez <gabrielmartinez@sisti.pt>	7 months ago
Irbe Krumina	66471710f8	cmd/k8s-operator: truncate long StatefulSet name prefixes (#10343) ... Kubernetes can generate StatefulSet names that are too long and result in invalid Pod revision hash label values. Calculate whether a StatefulSet name generated for a Service or Ingress will be too long and if so, truncate it. Updates tailscale/tailscale#10284 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	dd8bc9ba03	cmd/k8s-operator: log user/group impersonated by apiserver proxy (#10334) ... Updates tailscale/tailscale#10127 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	4f80f403be	cmd/k8s-operator: fix chart syntax error (#10333) ... Updates #9222 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	af49bcaa52	cmd/k8s-operator: set different app type for operator with proxy (#10081) ... Updates tailscale/tailscale#9222 plain k8s-operator should have hostinfo.App set to 'k8s-operator', operator with proxy should have it set to 'k8s-operator-proxy'. In proxy mode, we were setting the type after it had already been set to 'k8s-operator' Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
David Anderson	37863205ec	cmd/k8s-operator: strip credentials from client config in noauth mode ... Updates tailscale/corp#15526 Signed-off-by: David Anderson <danderson@tailscale.com>	8 months ago
Rhea Ghosh	970eb5e784	cmd/k8s-operator: sanitize connection headers (#10063) ... Fixes tailscale/corp#15526 Signed-off-by: Rhea Ghosh <rhea@tailscale.com>	8 months ago
Irbe Krumina	c2b87fcb46	cmd/k8s-operator/deploy/chart,.github/workflows: use helm chart API v2 (#10055) ... API v1 is compatible with helm v2 and v2 is not. However, helm v2 (the Tiller deployment mechanism) was deprecated in 2020 and no-one should be using it anymore. This PR also adds a CI lint test for helm chart Updates tailscale/tailscale#9222 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Irbe Krumina	ed1b935238	cmd/k8s-operator: allow to install operator via helm (#9920) ... Initial helm manifests. Updates tailscale/tailscale#9222 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Maisem Ali <maisem@tailscale.com>	8 months ago
Irbe Krumina	e9956419f6	cmd/k8s-operator: allow cleanup of cluster resources for deleted devices (#9917) ... Users should delete proxies by deleting or modifying the k8s cluster resources that they used to tell the operator to create they proxy. With this flow, the tailscale operator will delete the associated device from the control. However, in some cases users might have already deleted the device from the control manually. Updates tailscale/tailscale#9773 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Irbe Krumina	cac290da87	cmd/k8s-operator: users can configure firewall mode for kube operator proxies (#9769) ... * cmd/k8s-operator: users can configure operator to set firewall mode for proxies Users can now pass PROXY_FIREWALL_MODE={nftables,auto,iptables} to operator to make it create ingress/egress proxies with that firewall mode Also makes sure that if an invalid firewall mode gets configured, the operator will not start provisioning proxy resources, but will instead log an error and write an error event to the related Service. Updates tailscale/tailscale#9310 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Maisem Ali	f53c3be07c	cmd/k8s-operator: use our own container image instead of busybox ... We already have sysctl in the `tailscale/tailscale` image, just use that. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	8 months ago
Maisem Ali	1294b89792	cmd/k8s-operator: allow setting same host value for tls and ingress rules ... We were too strict and required the user not specify the host field at all in the ingress rules, but that degrades compatibility with existing helm charts. Relax the constraint so that rule.Host can either be empty, or match the tls.Host[0] value exactly. Fixes #9548 Signed-off-by: Maisem Ali <maisem@tailscale.com>	9 months ago
Maisem Ali	1cb9e33a95	cmd/k8s-operator: update env var in manifest to APISERVER_PROXY ... Replace the deprecated var with the one in docs to avoid confusion. Introduced in 335a5aaf9a. Updates #8317 Fixes #9764 Signed-off-by: Maisem Ali <maisem@tailscale.com>	9 months ago
Brad Fitzpatrick	93c6e1d53b	tstest/deptest: add check that x/exp/{maps,slices} imported as xfoo ... Updates #cleanup Change-Id: I4cbb5e477c739deddf7a46b66f286c9fdb106279 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Irbe Krumina	bdd9eeca90	cmd/k8s-operator: fix reconcile filters (#9533) ... Ensure that when there is an event on a Tailscale managed Ingress or Service child resource, the right parent type gets reconciled Updates tailscale/tailscale#502 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Irbe Krumina	c5b2a365de	cmd/k8s-operator: fix egress service name (#9494) ... Updates https://github.com/tailscale/tailscale/issues/502 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Maisem Ali	5f4d76c18c	cmd/k8s-operator: rename egress annotation ... It was tailscale.com/ts-tailnet-target-ip, which was pretty redundant. Change it to tailscale.com/tailnet-ip. Updates #502 Signed-off-by: Maisem Ali <maisem@tailscale.com>	9 months ago
Maisem Ali	d06b48dd0a	tailcfg: add RawMessage ... This adds a new RawMessage type backed by string instead of the json.RawMessage which is backed by []byte. The byte slice makes the generated views be a lot more defensive than the need to be which we can get around by using a string instead. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	9 months ago