tailscale

Commit Graph

Author	SHA1	Message	Date
Irbe Krumina	3af0f526b8	cmd{containerboot,k8s-operator},util/linuxfw: support ExternalName Services (#11802 ) * cmd/containerboot,util/linuxfw: support proxy backends specified by DNS name Adds support for optionally configuring containerboot to proxy traffic to backends configured by passing TS_EXPERIMENTAL_DEST_DNS_NAME env var to containerboot. Containerboot will periodically (every 10 minutes) attempt to resolve the DNS name and ensure that all traffic sent to the node's tailnet IP gets forwarded to the resolved backend IP addresses. Currently: - if the firewall mode is iptables, traffic will be load balanced accross the backend IP addresses using round robin. There are no health checks for whether the IPs are reachable. - if the firewall mode is nftables traffic will only be forwarded to the first IP address in the list. This is to be improved. * cmd/k8s-operator: support ExternalName Services Adds support for exposing endpoints, accessible from within a cluster to the tailnet via DNS names using ExternalName Services. This can be done by annotating the ExternalName Service with tailscale.com/expose: "true" annotation. The operator will deploy a proxy configured to route tailnet traffic to the backend IPs that service.spec.externalName resolves to. The backend IPs must be reachable from the operator's namespace. Updates tailscale/tailscale#10606 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	1fbaf26106	util/linuxfw: fix chain comparison (#11639 ) Don't compare pointer fields by pointer value, but by the actual value Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Irbe Krumina	92ca770b8d	util/linuxfw: fix MSS clamping in nftables mode (#11588 ) MSS clamping for nftables was mostly not ran due to to an earlier rule in the FORWARD chain issuing accept verdict. This commit places the clamping rule into a chain of its own to ensure that it gets ran. Updates tailscale/tailscale#11002 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Irbe Krumina	5fb721d4ad	util/linuxfw,wgengine/router: skip IPv6 firewall configuration in partial iptables mode (#11546 ) We have hosts that support IPv6, but not IPv6 firewall configuration in iptables mode. We also have hosts that have some support for IPv6 firewall configuration in iptables mode, but do not have iptables filter table. We should: - configure ip rules for all hosts that support IPv6 - only configure firewall rules in iptables mode if the host has iptables filter table. Updates tailscale/tailscale#11540 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
James Tucker	3f7313dbdb	util/linuxfw,wgengine/router: enable IPv6 configuration when netfilter is disabled Updates #11434 Signed-off-by: James Tucker <james@tailscale.com>	8 months ago
Irbe Krumina	90c4067010	util/linuxfw: add container-friendly IPv6 NAT check (#11353 ) Remove IPv6 NAT check when routing is being set up using nftables. This is unnecessary as support for nftables was added after support for IPv6. https://tldp.org/HOWTO/Linux+IPv6-HOWTO/ch18s04.html https://wiki.nftables.org/wiki-nftables/index.php/Building_and_installing_nftables_from_sources Additionally, run an extra check for IPv6 NAT support when the routing is set up with iptables. This is because the earlier checks rely on being able to use modprobe and on /proc/net/ip6_tables_names being populated on start - these conditions are usually not true in container environments. Updates tailscale/tailscale#11344 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Irbe Krumina	097c5ed927	util/linuxfw: insert rather than append nftables DNAT rule (#11303 ) Ensure that the latest DNATNonTailscaleTraffic rule gets inserted on top of any pre-existing rules. Updates tailscale/tailscale#11281 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
James Tucker	0b16620b80	.github/workflows: add privileged tests workflow We had missed regressions from privileged tests not running, now they can run. Updates #cleanup Signed-off-by: James Tucker <james@tailscale.com>	10 months ago
Irbe Krumina	0cdc8e20d6	util/linuxfw: return created chain (#10563 ) Ensure that if getOrCreateChain creates a new chain, it actually returns the created chain Updates tailscale/tailscale#10399 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	12 months ago
Naman Sood	d46a4eced5	util/linuxfw, wgengine: allow ingress to magicsock UDP port on Linux (#10370 ) * util/linuxfw, wgengine: allow ingress to magicsock UDP port on Linux Updates #9084. Currently, we have to tell users to manually open UDP ports on Linux when certain firewalls (like ufw) are enabled. This change automates the process of adding and updating those firewall rules as magicsock changes what port it listens on. Signed-off-by: Naman Sood <mail@nsood.in>	12 months ago
Naman Sood	0a59754eda	linuxfw,wgengine/route,ipn: add c2n and nodeattrs to control linux netfilter Updates tailscale/corp#14029. Signed-off-by: Naman Sood <mail@nsood.in>	12 months ago
Maisem Ali	c3a8e63100	util/linuxfw: add additional nftable detection logic We were previously using the netlink API to see if there are chains/rules that already exist. This works fine in environments where there is either full nftable support or no support at all. However, we have identified certain environments which have partial nftable support and the only feasible way of detecting such an environment is to try to create some of the chains that we need. This adds a check to create a dummy postrouting chain which is immediately deleted. The goal of the check is to ensure we are able to use nftables and that it won't error out later. This check is only done in the path where we detected that the system has no preexisting nftable rules. Updates #5621 Updates #8555 Updates #8762 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	fbfee6a8c0	cmd/containerboot: use linuxfw.NetfilterRunner This migrates containerboot to reuse the NetfilterRunner used by tailscaled instead of manipulating iptables rule itself. This has the added advantage of now working with nftables and we can potentially drop the `iptables` command from the container image in the future. Updates #9310 Co-authored-by: Irbe Krumina <irbe@tailscale.com> Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	05a1f5bf71	util/linuxfw: move detection logic Just a refactor to consolidate the firewall detection logic in a single package so that it can be reused in a later commit by containerboot. Updates #9310 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
James Tucker	ba6ec42f6d	util/linuxfw: add missing input rule to the tailscale tun Add an explicit accept rule for input to the tun interface, as a mirror to the explicit rule to accept output from the tun interface. The rule matches any packet in to our tun interface and accepts it, and the rule is positioned and prioritized such that it should be evaluated prior to conventional ufw/iptables/nft rules. Updates #391 Fixes #7332 Updates #9084 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
James Tucker	2066f9fbb2	util/linuxfw: fix crash in DelSNATRule when no rules are found Appears to be a missing nil handling case. I looked back over other usage of findRule and the others all have nil guards. findRule returns nil when no rules are found matching the arguments. Fixes #9553 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Craig Rodrigues	8683ce78c2	client/web, clientupdate, util/linuxfw, wgengine/magicsock: Use %v verb for errors Replace %w verb with %v verb when logging errors. Use %w only for wrapping errors with fmt.Errorf() Fixes: #9213 Signed-off-by: Craig Rodrigues <rodrigc@crodrigues.org>	1 year ago
Brad Fitzpatrick	1b223566dd	util/linuxfw: fix typo in unexported doc comment And flesh it out and use idiomatic doc style ("whether" for bools) and end in a period while there anyway. Updates #cleanup Change-Id: Ieb82f13969656e2340c3510e7b102dc8e6932611 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
KevinLiang10	b040094b90	util/linuxfw: reorganize nftables rules to allow it to work with ufw This commit tries to mimic the way iptables-nft work with the filewall rules. We follow the convention of using tables like filter, nat and the conventional chains, to make our nftables implementation work with ufw. Updates: #391 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
KevinLiang10	a3c7b21cd1	util/linuxfw: add nftables support This commit adds nftable rule injection for tailscaled. If tailscaled is started with envknob TS_DEBUG_USE_NETLINK_NFTABLES = true, the router will use nftables to manage firewall rules. Updates: #391 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago

20 Commits (9d22ec0ba27bef6dbb029273fa6e68c7894af01b)