Commit Graph

127 Commits (9cdb33e2a470bf8feff88887148bc18a916207d5)

Author SHA1 Message Date
Maisem Ali 1f51bb6891 net/tstun: do SNAT after filterPacketOutboundToWireGuard
In a configuration where the local node (ip1) has a different IP (ip2)
that it uses to communicate with a peer (ip3) we would do UDP flow
tracking on the `ip2->ip3` tuple. When we receive the response from
the peer `ip3->ip2` we would dnat it back to `ip3->ip1` which would
then not match the flow track state and the packet would get dropped.

To fix this, we should do flow tracking on the `ip1->ip3` tuple instead
of `ip2->ip3` which requires doing SNAT after the running filterPacketOutboundToWireGuard.

Updates tailscale/corp#19971, tailscale/corp#8020

Signed-off-by: Maisem Ali <maisem@tailscale.com>
7 months ago
Maisem Ali af97e7a793 tailcfg,all: add/plumb Node.IsJailed
This adds a new bool that can be sent down from control
to do jailing on the client side. Previously this would
only be done from control by modifying the packet filter
we sent down to clients. This would result in a lot of
additional work/CPU on control, we could instead just
do this on the client. This has always been a TODO which
we keep putting off, might as well do it now.

Updates tailscale/corp#19623

Signed-off-by: Maisem Ali <maisem@tailscale.com>
7 months ago
Maisem Ali e67069550b ipn/ipnlocal,net/tstun,wgengine: create and plumb jailed packet filter
This plumbs a packet filter for jailed nodes through to the
tstun.Wrapper; the filter for a jailed node is equivalent to a "shields
up" filter. Currently a no-op as there is no way for control to
tell the client whether a peer is jailed.

Updates tailscale/corp#19623

Co-authored-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Change-Id: I5ccc5f00e197fde15dd567485b2a99d8254391ad
7 months ago
Maisem Ali 5ef178fdca net/tstun: refactor peerConfig to allow storing more details
This refactors the peerConfig struct to allow storing more
details about a peer and not just the masq addresses. To be
used in a follow up change.

As a side effect, this also makes the DNAT logic on the inbound
packet stricter. Previously it would only match against the packets
dst IP, not it also takes the src IP into consideration. The beahvior
is at parity with the SNAT case.

Updates tailscale/corp#19623

Co-authored-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Change-Id: I5f40802bebbf0f055436eb8824e4511d0052772d
7 months ago
Andrew Dunham be663c84c1 net/tstun: rename natConfig to peerConfig
So that we can use this for additional, non-NAT configuration without it
being confusing.

Updates #cleanup

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I1658d59c9824217917a94ee76d2d08f0a682986f
7 months ago
Andrew Dunham 10497acc95 net/tstun: refactor natConfig to not be per-family
This was a holdover from the older, pre-BART days and is no longer
necessary.

Updates #cleanup

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I71b892bab1898077767b9ff51cef33d59c08faf8
7 months ago
Jordan Whited a47ce618bd
net/tstun: implement env var for disabling UDP GRO on Linux (#11924)
Certain device drivers (e.g. vxlan, geneve) do not properly handle
coalesced UDP packets later in the stack, resulting in packet loss.

Updates #11026

Signed-off-by: Jordan Whited <jordan@tailscale.com>
7 months ago
Brad Fitzpatrick 7c1d6e35a5 all: use Go 1.22 range-over-int
Updates #11058

Change-Id: I35e7ef9b90e83cac04ca93fd964ad00ed5b48430
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
8 months ago
Brad Fitzpatrick a1abd12f35 cmd/tailscaled, net/tstun: build for aix/ppc64
At least in userspace-networking mode.

Fixes #11361

Change-Id: I78d33f0f7e05fe9e9ee95b97c99b593f8fe498f2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
8 months ago
Percy Wegmann 8b8b315258 net/tstun: use gaissmai/bart instead of tempfork/device
This implementation uses less memory than tempfork/device,
which helps avoid OOM conditions in the iOS VPN extension when
switching to a Tailnet with ExitNode routing enabled.

Updates tailscale/corp#18514

Signed-off-by: Percy Wegmann <percy@tailscale.com>
9 months ago
Andrew Dunham 62cf83eb92 go.mod: bump gvisor
The `stack.PacketBufferPtr` type no longer exists; replace it with
`*stack.PacketBuffer` instead.

Updates #8043

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ib56ceff09166a042aa3d9b80f50b2aa2d34b3683
9 months ago
Andrew Dunham 3dd8ae2f26 net/tstun: fix spelling of "WireGuard"
Updates #cleanup

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ida7e30f4689bc18f5f7502f53a0adb5ac3c7981a
10 months ago
Andrew Lytvynov 2716250ee8
all: cleanup unused code, part 2 (#10670)
And enable U1000 check in staticcheck.

Updates #cleanup

Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
12 months ago
Andrew Lytvynov 1302bd1181
all: cleanup unused code, part 1 (#10661)
Run `staticcheck` with `U1000` to find unused code. This cleans up about
a half of it. I'll do the other half separately to keep PRs manageable.

Updates #cleanup

Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
12 months ago
Maisem Ali 5297bd2cff cmd/tailscaled,net/tstun: fix data race on start-up in TUN mode
Fixes #7894

Change-Id: Ice3f8019405714dd69d02bc07694f3872bb598b8

Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
1 year ago
Maisem Ali 9d96e05267 net/packet: split off checksum munging into different pkg
The current structure meant that we were embedding netstack in
the tailscale CLI and in the GUIs. This removes that by isolating
the checksum munging to a different pkg which is only called from
`net/tstun`.

Fixes #9756

Signed-off-by: Maisem Ali <maisem@tailscale.com>
1 year ago
Maisem Ali 78a083e144 types/ipproto: drop IPProto from IPProtoVersion
Based on https://github.com/golang/go/wiki/CodeReviewComments#package-names.

Updates #cleanup

Signed-off-by: Maisem Ali <maisem@tailscale.com>
1 year ago
Val 893bdd729c disco,net/tstun,wgengine/magicsock: probe peer MTU
Automatically probe the path MTU to a peer when peer MTU is enabled, but do not
use the MTU information for anything yet.

Updates #311

Signed-off-by: Val <valerie@tailscale.com>
1 year ago
Tom DNetto da1b917575 net/tstun: finish wiring IPv6 NAT support
Updates https://github.com/tailscale/corp/issues/11202
Updates ENG-991
Signed-off-by: Tom DNetto <tom@tailscale.com>
1 year ago
Val c26d91d6bd net/tstun: remove unused function DefaultMTU()
Now that corp is updated, remove the shim code to bridge the rename from
DefaultMTU() to DefaultTUNMTU.

Updates #311

Signed-off-by: Val <valerie@tailscale.com>
1 year ago
Andrea Barisani b5b4298325 go.mod,*: bump gvisor
Updates #9253

Signed-off-by: Andrea Barisani <andrea@inversepath.com>
Signed-off-by: James Tucker <james@tailscale.com>
1 year ago
Val c608660d12 wgengine,net,ipn,disco: split up and define different types of MTU
Prepare for path MTU discovery by splitting up the concept of
DefaultMTU() into the concepts of the Tailscale TUN MTU, MTUs of
underlying network interfaces, minimum "safe" TUN MTU, user configured
TUN MTU, probed path MTU to a peer, and maximum probed MTU. Add a set
of likely MTUs to probe.

Updates #311

Signed-off-by: Val <valerie@tailscale.com>
1 year ago
Brad Fitzpatrick 241c983920 net/tstun: use untyped consts, simplify DefaultMTU func
Updates #cleanup

Change-Id: Ic9ad1d6134818699f777c66a31024e846dfdc5d4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Val 6cc5b272d8 Revert "wgengine,net,ipn,disco: split up and define different types of MTU"
This reverts commit 059051c58a.

Signed-off-by: Val <valerie@tailscale.com>
1 year ago
Val 059051c58a wgengine,net,ipn,disco: split up and define different types of MTU
Prepare for path MTU discovery by splitting up the concept of
DefaultMTU() into the concepts of the Tailscale TUN MTU, MTUs of
underlying network interfaces, minimum "safe" TUN MTU, user configured
TUN MTU, probed path MTU to a peer, and maximum probed MTU. Add a set
of likely MTUs to probe.

Updates #311

Signed-off-by: Val <valerie@tailscale.com>
1 year ago
Maisem Ali 3056a98bbd net/tstun: add better logging of natV4Config
It might as well have been spewing out gibberish. This adds
a nicer output format for us to be able to read and identify
whats going on.

Sample output
```
natV4Config{nativeAddr: 100.83.114.95, listenAddrs: [10.32.80.33], dstMasqAddrs: [10.32.80.33: 407 peers]}
```

Fixes tailscale/corp#14650

Signed-off-by: Maisem Ali <maisem@tailscale.com>
1 year ago
Tom DNetto c08cf2a9c6 all: declare & plumb IPv6 masquerade address for peer
This PR plumbs through awareness of an IPv6 SNAT/masquerade address from the wire protocol
through to the low-level (tstun / wgengine). This PR is the first in two PRs for implementing
IPv6 NAT support to/from peers.

A subsequent PR will implement the data-plane changes to implement IPv6 NAT - this is just plumbing.

Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates ENG-991
1 year ago
Brad Fitzpatrick dc7aa98b76 all: use set.Set consistently instead of map[T]struct{}
I didn't clean up the more idiomatic map[T]bool with true values, at
least yet.  I just converted the relatively awkward struct{}-valued
maps.

Updates #cleanup

Change-Id: I758abebd2bb1f64bc7a9d0f25c32298f4679c14f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Andrea Barisani 0a74d46568 adjust build tags for tamago
Signed-off-by: Andrea Barisani <andrea@inversepath.com>
1 year ago
Brad Fitzpatrick 98a5116434 all: adjust some build tags for plan9
I'm not saying it works, but it compiles.

Updates #5794

Change-Id: I2f3c99732e67fe57a05edb25b758d083417f083e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Brad Fitzpatrick e8551d6b40 all: use Go 1.21 slices, maps instead of x/exp/{slices,maps}
Updates #8419

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Brad Fitzpatrick 1543e233e6 net/tstun, tsnet: make happier on WASI
Also fix a js/wasm issue with tsnet in the process. (same issue as WASI)

Updates #8320
Fixes #8315

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Brad Fitzpatrick 6e967446e4 tsd: add package with System type to unify subsystem init, discovery
This is part of an effort to clean up tailscaled initialization between
tailscaled, tailscaled Windows service, tsnet, and the mac GUI.

Updates #8036

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Maisem Ali 3ae7140690 net/tstun: handle exit nodes in NAT configs
In the case where the exit node requires SNAT, we would SNAT all traffic not just the
traffic meant to go through the exit node. This was a result of the default route being
added to the routing table which would match basically everything.

In this case, we need to account for all peers in the routing table not just the ones
that require NAT.

Fix and add a test.

Updates tailscale/corp#8020

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago
Andrew Dunham 04a3118d45 net/tstun: add tests for captureHook
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I630f852d9f16c951c721b34f2bc4128e68fe9475
2 years ago
Maisem Ali 64bbf1738e tailcfg: make SelfNodeV4MasqAddrForThisPeer a pointer
This makes `omitempty` actually work, and saves bytes in each map response.

Updates tailscale/corp#8020

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago
Tom DNetto 6a627e5a33 net, wgengine/capture: encode NAT addresses in pcap stream
Signed-off-by: Tom DNetto <tom@tailscale.com>
2 years ago
James Tucker 40fa2a420c envknob,net/tstun,wgengine: use TS_DEBUG_MTU consistently
Noted on #5915 TS_DEBUG_MTU was not used consistently everywhere.
Extract the default into a function that can apply this centrally and
use it everywhere.

Added envknob.Lookup{Int,Uint}Sized to make it easier to keep CodeQL
happy when using converted values.

Updates #5915

Signed-off-by: James Tucker <james@tailscale.com>
2 years ago
Maisem Ali 985535aebc net/tstun,wgengine/*: add support for NAT to routes
This adds support to make exit nodes and subnet routers work
when in scenarios where NAT is required.

It also updates the NATConfig to be generated from a `wgcfg.Config` as
that handles merging prefs with the netmap, so it has the required information
about whether an exit node is already configured and whether routes are accepted.

Updates tailscale/corp#8020

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago
Maisem Ali d1d5d52b2c net/tstun/table: add initial RoutingTable implementation
It is based on `*tempfork/device.AllowedIPs`.

Updates tailscale/corp#8020

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago
Jordan Whited 27e37cf9b3
go.mod, net/tstun, wgengine/magicsock: update wireguard-go (#7712)
This commit updates the wireguard-go dependency to pull in fixes for
the tun package, specifically 052af4a and aad7fca.

Signed-off-by: Jordan Whited <jordan@tailscale.com>
2 years ago
Maisem Ali d2fd101eb4 net/tstun: only log natConfig on changes
Updates tailscale/corp#8020

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago
Maisem Ali 0bf8c8e710 net/tstun: use p.Buffer() in more places
Updates tailscale/corp#8020

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago
Maisem Ali bb31fd7d1c net/tstun: add inital support for NAT v4
This adds support in tstun to utitilize the SelfNodeV4MasqAddrForThisPeer and
perform the necessary modifications to the packet as it passes through tstun.

Currently this only handles ICMP, UDP and TCP traffic.
Subnet routers and Exit Nodes are also unsupported.

Updates tailscale/corp#8020

Co-authored-by: Melanie Warrick <warrick@tailscale.com>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago
Maisem Ali 535fad16f8 net/tstun: rename filterIn/filterOut methods to be more descriptive
Updates tailscale/corp#8020

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago
Tom DNetto 2ca6dd1f1d wgengine: start logging DISCO frames to pcap stream
Signed-off-by: Tom DNetto <tom@tailscale.com>
2 years ago
Tom DNetto 99b9d7a621 all: implement pcap streaming for datapath debugging
Updates: tailscale/corp#8470

Signed-off-by: Tom DNetto <tom@tailscale.com>
2 years ago
Will Norris 71029cea2d all: update copyright and license headers
This updates all source files to use a new standard header for copyright
and license declaration.  Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.

This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.

Updates #6865

Signed-off-by: Will Norris <will@tailscale.com>
2 years ago
andig 5f96d6211a Remove redundant type declaration
Signed-off-by: andig <cpuidle@gmx.de>
2 years ago
Brad Fitzpatrick 6d85a94767 net/{packet,tstun}: fix typo in test helper docs
Change-Id: Ifc1684fe77c7d2585e049e0dfd7340910c47a67a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago