tailscale

Commit Graph

Author	SHA1	Message	Date
julianknodt	506c2fe8e2	cmd/tailscale: make netcheck use active DERP map, delete static copy After allowing for custom DERP maps, it's convenient to be able to see their latency in netcheck. This adds a query to the local tailscaled for the current DERPMap. Updates #1264 Signed-off-by: julianknodt <julianknodt@gmail.com>	4 years ago
Brad Fitzpatrick	3910c1edaf	net/socks5/tssocks: add new package, move SOCKS5 glue out of tailscaled Prep for #1970, #2264, #2268 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	82e15d3450	cmd/tailscaled: log SOCKS5 port when port 0 requested Part of #2158 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	10d7c2583c	net/dnsfallback: don't depend on derpmap.Prod Move derpmap.Prod to a static JSON file (go:generate'd) instead, to make its role explicit. And add a TODO about making dnsfallback use an update-over-time DERP map file instead of a baked-in one. Updates #1264 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
julianknodt	148602a89a	derp,cmd/derper: allow server to verify clients This adds a flag to the DERP server which specifies to verify clients through a local tailscaled. It is opt-in, so should not affect existing clients, and is mainly intended for users who want to run their own DERP servers. It assumes there is a local tailscaled running and will attempt to hit it for peer status information. Updates #1264 Signed-off-by: julianknodt <julianknodt@gmail.com>	4 years ago
Brad Fitzpatrick	38be964c2b	go.mod: update netstack Fixes a atomic alignment crash on 32-bit machines. Fixes #2129 Fixes tailscale/tailscale-synology#66 (same) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Denton Gentry	ad288baaea	net/interfaces: use IPv4 link local if nothing better The only connectivity an AWS Lambda container has is an IPv4 link-local 169.254.x.x address using NAT: 12: vtarget_1@if11: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 7e:1c:3f:00:00:00 brd ff:ff:ff:ff:ff:ff link-netnsid 1 inet 169.254.79.1/32 scope global vtarget_1 valid_lft forever preferred_lft forever If there are no other IPv4/v6 addresses available, and we are running in AWS Lambda, allow IPv4 169.254.x.x addresses to be used. ---- Similarly, a Google Cloud Run container's only connectivity is a Unique Local Address fddf:3978:feb1:d745::c001/128. If there are no other addresses available then allow IPv6 Unique Local Addresses to be used. We actually did this in an earlier release, but now refactor it to work the same way as the IPv4 link-local support is being done. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	4 years ago
Brad Fitzpatrick	03311bb0d6	hostinfo: add hostinfo package, move stuff out of controlclient And make it cheaper, so other parts of the code can check the environment. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	ac07ff43bf	cmd/tailscaled: start after NetworkManager and systemd-resolved. The dependency is a "soft" ordering dependency only, meaning that tailscaled will start after those services if those services were going to be run anyway, but doesn't force either of them to run. That's why it's safe to specify this dependency unconditionally, even for systems that don't run those services. Updates #2127. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Christine Dodrill	8b2b899989	tstest/integration: test Alpine Linux (#2098 ) Alpine Linux[1] is a minimal Linux distribution built around musl libc. It boots very quickly, requires very little ram and is as close as you can get to an ideal citizen for testing Tailscale on musl. Alpine has a Tailscale package already[2], but this patch also makes it easier for us to provide an Alpine Linux package off of pkgs in the future. Alpine only offers Tailscale on the rolling-release edge branch. [1]: https://alpinelinux.org/ [2]: https://pkgs.alpinelinux.org/packages?name=tailscale&branch=edge Updates #1988 Signed-off-by: Christine Dodrill <xe@tailscale.com>	4 years ago
Maisem Ali	f944614c5c	cmd/tailscale/web: add support for QNAP Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Matt Layher	6956645ec8	go.mod: bump github.com/mdlayher/netlink to v1.4.1 Signed-off-by: Matt Layher <mdlayher@gmail.com>	4 years ago
Adrian Dewhurst	6d6cf88d82	control/controlclient: use our fork of certstore The cyolosecurity fork of certstore did not update its module name and thus can only be used with a replace directive. This interferes with installing using `go install` so I created a tailscale fork with an updated module name. Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>	4 years ago
Josh Bleecher Snyder	1ece91cede	go.mod: upgrade wireguard-windows, de-fork wireguard-go Pull in the latest version of wireguard-windows. Switch to upstream wireguard-go. This requires reverting all of our import paths. Unfortunately, this has to happen at the same time. The wireguard-go change is very low risk, as that commit matches our fork almost exactly. (The only changes are import paths, CI files, and a go.mod entry.) So if there are issues as a result of this commit, the first place to look is wireguard-windows changes. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	a86a0361a7	go.mod: upgrade all deps At the start of a dev cycle we'll upgrade all dependencies. Done with: $ for Dep in $(cat go.mod \| perl -ne '/(\S+) v/ and print "$1\n"'); do go get $Dep@upgrade; done Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	5666663370	net/packet: use netaddr AppendTo methods This lets us remote the types/strbuilder package, which had only a single user. And it's faster. name old time/op new time/op delta String/tcp4-8 175ns ± 0% 58ns ± 1% -66.95% (p=0.000 n=10+9) String/tcp6-8 226ns ± 1% 136ns ± 1% -39.85% (p=0.000 n=10+10) String/udp4-8 175ns ± 1% 58ns ± 1% -67.01% (p=0.000 n=10+9) String/udp6-8 230ns ± 1% 140ns ± 0% -39.32% (p=0.000 n=10+9) String/icmp4-8 164ns ± 0% 50ns ± 1% -69.89% (p=0.000 n=10+10) String/icmp6-8 217ns ± 1% 129ns ± 0% -40.46% (p=0.000 n=10+10) String/igmp-8 196ns ± 0% 56ns ± 1% -71.32% (p=0.000 n=10+10) String/unknown-8 2.06ns ± 1% 2.06ns ± 2% ~ (p=0.985 n=10+10) name old alloc/op new alloc/op delta String/tcp4-8 32.0B ± 0% 32.0B ± 0% ~ (all equal) String/tcp6-8 168B ± 0% 96B ± 0% -42.86% (p=0.000 n=10+10) String/udp4-8 32.0B ± 0% 32.0B ± 0% ~ (all equal) String/udp6-8 168B ± 0% 96B ± 0% -42.86% (p=0.000 n=10+10) String/icmp4-8 32.0B ± 0% 32.0B ± 0% ~ (all equal) String/icmp6-8 104B ± 0% 64B ± 0% -38.46% (p=0.000 n=10+10) String/igmp-8 48.0B ± 0% 48.0B ± 0% ~ (all equal) String/unknown-8 0.00B 0.00B ~ (all equal) name old allocs/op new allocs/op delta String/tcp4-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) String/tcp6-8 3.00 ± 0% 1.00 ± 0% -66.67% (p=0.000 n=10+10) String/udp4-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) String/udp6-8 3.00 ± 0% 1.00 ± 0% -66.67% (p=0.000 n=10+10) String/icmp4-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) String/icmp6-8 3.00 ± 0% 1.00 ± 0% -66.67% (p=0.000 n=10+10) String/igmp-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) String/unknown-8 0.00 0.00 ~ (all equal) Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Maisem Ali	234cc87f48	cmd/tailscaled: use the wf package instead of wireguard-windows/firewall Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Josh Bleecher Snyder	25df067dd0	all: adapt to opaque netaddr types This commit is a mishmash of automated edits using gofmt: gofmt -r 'netaddr.IPPort{IP: a, Port: b} -> netaddr.IPPortFrom(a, b)' -w . gofmt -r 'netaddr.IPPrefix{IP: a, Port: b} -> netaddr.IPPrefixFrom(a, b)' -w . gofmt -r 'a.IP.Is4 -> a.IP().Is4' -w . gofmt -r 'a.IP.As16 -> a.IP().As16' -w . gofmt -r 'a.IP.Is6 -> a.IP().Is6' -w . gofmt -r 'a.IP.As4 -> a.IP().As4' -w . gofmt -r 'a.IP.String -> a.IP().String' -w . And regexps: \w(.)\.Port = (.) -> $1 = $1.WithPort($2) \w(.)\.IP = (.) -> $1 = $1.WithIP($2) And lots of manual fixups. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	36a26e6a71	internal/deephash: rename from deepprint Yes, it printed, but that was an implementation detail for hashing. And coming optimization will make it print even less. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	9360f36ebd	all: use lower-case letters at the start of error message Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Avery Pennarun	19c3e6cc9e	types/logger: rate limited: more hysteresis, better messages. - Switch to our own simpler token bucket, since x/time/rate is missing necessary stuff (can't provide your own time func; can't check the current bucket contents) and it's overkill anyway. - Add tests that actually include advancing time. - Don't remove the rate limit on a message until there's enough room to print at least two more of them. When we do, we'll also print how many we dropped, as a contextual reminder that some were previously lost. (This is more like how the Linux kernel does it.) - Reformat the [RATE LIMITED] messages to be shorter, and to not corrupt original message. Instead, we print the message, then print its format string. - Use %q instead of \"%s\", for more accurate parsing later, if the format string contained quotes. Fixes #1772 Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Josh Bleecher Snyder	20e04418ff	net/dns: add GOOS build tags Fixes #1786 Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	3c543c103a	wgengine/magicsock: unify initial bind and rebind We had two separate code paths for the initial UDP listener bind and any subsequent rebinds. IPv6 got left out of the rebind code. Rather than duplicate it there, unify the two code paths. Then improve the resulting code: * Rebind had nested listen attempts to try the user-specified port first, and then fall back to :0 if that failed. Convert that into a loop. * Initial bind tried only the user-specified port. Rebind tried the user-specified port and 0. But there are actually three ports of interest: The one the user specified, the most recent port in use, and 0. We now try all three in order, as appropriate. * In the extremely rare case in which binding to port 0 fails, use a dummy net.PacketConn whose reads block until close. This will keep the wireguard-go receive func goroutine alive. As a pleasant side-effect of this, if we decide that we need to resuscitate #1796, it will now be much easier. Fixes #1799 Co-authored-by: David Anderson <danderson@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	8fb66e20a4	wgengine/magicsock: remove DefaultPort const Assume it'll stay at 0 forever, so hard-code it and delete code conditional on it being non-0. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
David Anderson	25ce9885a2	net/dns: don't use NM+resolved for NM >=1.26.6. NetworkManager fixed the bug that forced us to use NetworkManager if it's programming systemd-resolved, and in the same release also made NetworkManager ignore DNS settings provided for unmanaged interfaces... Which breaks what we used to do. So, with versions 1.26.6 and above, we MUST NOT use NetworkManager to indirectly program systemd-resolved, but thankfully we can talk to resolved directly and get the right outcome. Fixes #1788 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Aleksandar Pesic	7c985e4944	ipn/ipnlocal: add file sharing to windows shell Updates: tailscale/winmin#33 Signed-off-by: Aleksandar Pesic <peske.nis@gmail.com>	4 years ago
Brad Fitzpatrick	91c9c33036	cmd/tailscaled: don't block ipnserver startup behind engine init on Windows With this change, the ipnserver's safesocket.Listen (the localhost tcp.Listen) happens right away, before any synchronous TUN/DNS/Engine/etc setup work, which might be slow, especially on early boot on Windows. Because the safesocket.Listen starts up early, that means localhost TCP dials (the safesocket.Connect from the GUI) complete successfully and thus the GUI avoids the MessageBox error. (I verified that pacifies it, even without a Listener.Accept; I'd feared that Windows localhost was maybe special and avoided the normal listener backlog). Once the GUI can then connect immediately without errors, the various timeouts then matter less, because the backend is no longer trying to race against the GUI's timeout. So keep retrying on errors for a minute, or 10 minutes if the system just booted in the past 10 minutes. This should fix the problem with Windows 10 desktops auto-logging in and starting the Tailscale frontend which was then showing a MessageBox error about failing to connect to tailscaled, which was slow coming up because the Windows networking stack wasn't up yet. Fingers crossed. Fixes #1313 (previously #1187, etc) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Alex Brainman	7689213aaa	cmd/tailscaled: add subcommands to install and remove tailscaled Windows service This change implements Windows version of install-system-daemon and uninstall-system-daemon subcommands. When running the commands the user will install or remove Tailscale Windows service. Updates #1232 Signed-off-by: Alex Brainman <alex.brainman@gmail.com>	4 years ago
Brad Fitzpatrick	f99e63bb17	ipn: don't Logout when Windows GUI disconnects Logout used to be a no-op, so the ipnserver previously synthensized a Logout on disconnect. Now that Logout actually invalidates the node key that was forcing all GUI closes to log people out. Instead, add a method to LocalBackend to specifically mean "the Windows GUI closed, please forget all the state". Fixes tailscale/corp#1591 (ignoring the notification issues, tracked elsewhere) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	eb6115e295	cmd/tailscaled: let SOCKS5 dial non-Tailscale addrs in userspace mode Fixes #1617 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Naman Sood	5ea53891fe	cmd/tailscaled: populate netstack variable to use dialer in SOCKS5 Signed-off-by: Naman Sood <mail@nsood.in>	4 years ago
Brad Fitzpatrick	db5e269463	client/tailscale/apitype: move local API types to new apitype package They were scattered/duplicated in misc places before. It can't be in the client package itself for circular dep reasons. This new package is basically tailcfg but for localhost communications, instead of to control. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	854d5d36a1	net/dns: return error from NewOSManager, use it to initialize NM. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	5480189313	net/dns: implement a DNS override workaround for legacy resolvconf. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	958782c737	cmd/{tailscale,tailscaled}: use netstack for subnet routing on Synology Updates #707 Fixes #451 Fixes tailscale/tailscale-synology#52 (just make it work by default) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	950fc28887	ipn, paths, cmd/tailscaled: remove LegacyConfigPath, relaynode migration It is time. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	d488678fdc	cmd/tailscaled, wgengine{,/netstack}: add netstack hybrid mode, add to Windows For #707 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	1f99f889e1	ipn/{ipnlocal,localapi}: add localapi handler to dial/proxy file PUTs Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	bc4381447f	net/tstun: return the real interface name at device creation. This is usually the same as the requested interface, but on some unixes can vary based on device number allocation, and on Windows it's the GUID instead of the pretty name, since everything relating to configuration wants the GUID. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	7d84ee6c98	net/dns: unify the OS manager and internal resolver. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	4c61ebacf4	wgengine: move DNS configuration out of wgengine/router. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Josh Bleecher Snyder	b3ceca1dd7	wgengine/...: split into multiple receive functions Upstream wireguard-go has changed its receive model. NewDevice now accepts a conn.Bind interface. The conn.Bind is stateless; magicsock.Conns are stateful. To work around this, we add a connBind type that supports cheap teardown and bring-up, backed by a Conn. The new conn.Bind allows us to specify a set of receive functions, rather than having to shoehorn everything into ReceiveIPv4 and ReceiveIPv6. This lets us plumbing DERP messages directly into wireguard-go, instead of having to mux them via ReceiveIPv4. One consequence of the new conn.Bind layer is that closing the wireguard-go device is now indistinguishable from the routine bring-up and tear-down normally experienced by a conn.Bind. We thus have to explicitly close the magicsock.Conn when the close the wireguard-go device. One downside of this change is that we are reliant on wireguard-go to call receiveDERP to process DERP messages. This is fine for now, but is perhaps something we should fix in the future. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
David Anderson	f77ba75d6c	wgengine/router: move DNS cleanup into the DNS package. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	39b9ab3522	cmd/tailscaled: rename isUserspace to useNetstack The bool was already called useNetstack at the caller. isUserspace (to mean netstack) is confusing next to wgengine.NewUserspaceEngine, as that's a different type of 'userspace'. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	90f82b6946	net/dns/resolver: add live reconfig, plumb through to ipnlocal. The resolver still only supports a single upstream config, and ipn/wgengine still have to split up the DNS config, but this moves closer to unifying the DNS configs. As a handy side-effect of the refactor, IPv6 MagicDNS records exist now. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	d99f5b1596	net/dns/resolver: factor the resolver out into a sub-package. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Maisem Ali	1c98c5f103	cmd/tailscaled: remove tailscaled binary on uninstall-system-daemon Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Brad Fitzpatrick	41e4e02e57	net/{packet,tstun}: send peerapi port in TSMP pongs For discovery when an explicit hostname/IP is known. We'll still also send it via control for finding peers by a list. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	0fb738760f	wgengine: make Tun optional again, default to fake. This makes setup more explicit in prod codepaths, without requiring a bunch of arguments or helpers for tests and userspace mode. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	93a4aa697c	wgengine: default Router to a no-op router. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago

1 2 3 4 5

201 Commits (9b063b86c3390a29dd1abbd820e432fa2b043159)