1278 Commits (8c2fcef453eeaec16203c6cfe724c1d686a509ef)

Author	SHA1	Message	Date
Adrian Dewhurst	86aa0485a6	ipn/ipnlocal, util/syspolicy: make run exit node a preference option ... Previously, the "RunExitNode" policy merely controlled the visibility of the "run as exit node" menu item, not the setting itself. This migrates that setting to a preference option named "AdvertiseExitNode". Updates ENG-2138 Change-Id: Ia6a125beb6b4563d380c6162637ce4088f1117a0 Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>	11 months ago
Andrew Lytvynov	e25f114916	ipn,cmd/tailscale/cli: support hierarchical MaskedPrefs (#10507) ... Some fields if `ipn.Prefs` are structs. `ipn.MaskedPrefs` has a single level of boolean `*Set` flags, which doesn't map well to nested structs within `ipn.Prefs`. Change `MaskedPrefs` and `ApplyEdits` to support `FooSet` struct fields that map to a nested struct of `ipn.Prefs` like `AutoUpdates`. Each struct field in `MaskedPrefs` is just a bundle of more `Set` bool fields or other structs. This allows you to have a `Set` flag for any arbitrarily-nested field of `ipn.Prefs`. Also, make `ApplyEdits` match fields between `Prefs` and `MaskedPrefs` by name instead of order, to make it a bit less finicky. It's probably slower but `ipn.ApplyEdits` should not be in any hot path. As a result, `AutoUpdate.Check` and `AutoUpdate.Apply` fields don't clobber each other when set individually. Updates #16247 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	11 months ago
Adrian Dewhurst	f706a3abd0	ipn/ipnlocal, util/syspolicy: add auto update policy ... Due to the Sparkle preference naming convention, macsys already has a policy key named "ApplyUpdates" that merely shows or hides the menu item that controls if auto updates are installed, rather than directly controlling the setting. For other platforms, we are going to use "InstallUpdates" instead because it seemed better than the other options that were considered. Updates ENG-2127 Updates tailscale/corp#16247 Change-Id: Ia6a125beb6b4563d380c6162637ce4088f1117a0 Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>	11 months ago
Adrian Dewhurst	1a4d423328	ipn/ipnlocal: add additional syspolicy enforcement ... This adds support for enforcing exit node LAN access, DNS and subnet routes. Adding new preference policies was getting repetitive, so this turns some of the boilerplate into a table. Updates tailscale/corp#15585 Updates ENG-2240 Change-Id: Iabd3c42b0ae120b3145fac066c5caa7fc4d67824 Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>	11 months ago
Adrian Dewhurst	af32d1c120	ipn/ipnlocal: better enforce system policies ... Previously, policies affected the default prefs for a new profile, but that does not affect existing profiles. This change ensures that policies are applied whenever preferences are loaded or changed, so a CLI or GUI client that does not respect the policies will still be overridden. Exit node IP is dropped from this PR as it was implemented elsewhere in #10172. Fixes tailscale/corp#15585 Change-Id: Ide4c3a4b00a64e43f506fa1fab70ef591407663f Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>	11 months ago
Sonia Appasamy	ac6f671c54	ipn/localapi: use clientupdate.CanAutoUpdate from serveUpdateCheck ... Fixes #10486 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	11 months ago
Naman Sood	0a59754eda	linuxfw,wgengine/route,ipn: add c2n and nodeattrs to control linux netfilter ... Updates tailscale/corp#14029. Signed-off-by: Naman Sood <mail@nsood.in>	11 months ago
Matt Layher	a217f1fccf	all: fix nilness issues ... Signed-off-by: Matt Layher <mdlayher@gmail.com>	11 months ago
Sonia Appasamy	7a4ba609d9	client/web: show features based on platform support ... Hiding/disabling UI features when not available on the running client. Updates #10261 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	11 months ago
Sonia Appasamy	bcc9b44cb1	client/web: hide admin panel links for non-tailscale control servers ... Updates #10261 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	11 months ago
Claire Wang	8af503b0c5	syspolicy: add exit node related policies (#10172) ... Adds policy keys ExitNodeID and ExitNodeIP. Uses the policy keys to determine the exit node in preferences. Fixes tailscale/corp#15683 Signed-off-by: Claire Wang <claire@tailscale.com>	11 months ago
Sonia Appasamy	bc4e303846	ipn/ipnstate: add AllowedIPs to PeerStatus ... Adds AllowedIPs to PeerStatus, allowing for easier lookup of the routes allowed to be routed to a node. Will be using the AllowedIPs of the self node from the web client interface to display approval status of advertised routes. Updates #10261 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	11 months ago
Andrew Lytvynov	ac4b416c5b	cmd/tailscale,ipn/ipnlocal: pass available update as health message (#10420) ... To be consistent with the formatting of other warnings, pass available update health message instead of handling ClientVersion in he CLI. Fixes #10312 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	11 months ago
Tom DNetto	8a660a6513	ipn/ipnlocal: update hostinfo when app connector state is toggled ... Updates: https://github.com/tailscale/corp/issues/16041 Signed-off-by: Tom DNetto <tom@tailscale.com>	11 months ago
Andrew Lytvynov	5a9e935597	clientupdate: implement update for Unraid (#10344) ... Use the [`plugin` CLI](https://forums.unraid.net/topic/72240-solved-is-there-a-way-to-installuninstall-plugins-from-script/#comment-676870) to fetch and apply the update. Updates https://github.com/tailscale/tailscale/issues/10184 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	11 months ago
Tom DNetto	611e0a5bcc	appc,ipn/local: support wildcard when matching app-connectors ... Updates: ENG-2453 Signed-off-by: Tom DNetto <tom@tailscale.com>	12 months ago
Marwan Sulaiman	2dc0645368	ipn/ipnlocal,cmd/tailscale: persist tailnet name in user profile ... This PR starts to persist the NetMap tailnet name in SetPrefs so that tailscaled clients can use this value to disambiguate fast user switching from one tailnet to another that are under the same exact login. We will also try to backfill this information during backend starts and profile switches so that users don't have to re-authenticate their profile. The first client to use this new information is the CLI in 'tailscale switch -list' which now uses text/tabwriter to display the ID, Tailnet, and Account. Since account names are ambiguous, we allow the user to pass 'tailscale switch ID' to specify the exact tailnet they want to switch to. Updates #9286 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	12 months ago
Ox Cart	719ee4415e	ssh/tailssh: use control server time instead of local time ... This takes advantage of existing functionality in ipn/ipnlocal to adjust the local clock based on periodic time signals from the control server. This way, when checking things like SSHRule expirations, calculations are protected incorrectly set local clocks. Fixes tailscale/corp#15796 Signed-off-by: Percy Wegmann <percy@tailscale.com>	12 months ago
Sonia Appasamy	bd534b971a	{client/web},{ipn/ipnlocal}: replace localapi debug-web-client endpoint ... This change removes the existing debug-web-client localapi endpoint and replaces it with functions passed directly to the web.ServerOpts when constructing a web.ManageServerMode client. The debug-web-client endpoint previously handled making noise requests to the control server via the /machine/webclient/ endpoints. The noise requests must be made from tailscaled, which has the noise connection open. But, now that the full client is served from tailscaled, we no longer need to proxy this request over the localapi. Updates tailscale/corp#14335 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	12 months ago
Brad Fitzpatrick	cca27ef96a	ipn/ipnlocal: add c2n method to check on TLS cert fetch status ... So the control plane can delete TXT records more aggressively after client's done with ACME fetch. Updates tailscale/corp#15848 Change-Id: I4f1140305bee11ee3eee93d4fec3aef2bd6c5a7e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	12 months ago
Tyler Smalley	90eb5379f4	ipn/ipnlocal: log and don't return full file serve error (#10174) ... Previously we would return the full error from Stat or Open, possibily exposing the full file path. This change will log the error and return the generic error message "an error occurred reading the file or directory". Updates tailscale/corp#15485 Signed-off-by: Tyler Smalley <tyler@tailscale.com>	12 months ago
Brad Fitzpatrick	3bd382f369	wgengine/magicsock: add DERP homeless debug mode for testing ... In DERP homeless mode, a DERP home connection is not sought or maintained and the local node is not reachable. Updates #3363 Updates tailscale/corp#396 Change-Id: Ibc30488ac2e3cfe4810733b96c2c9f10a51b8331 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	12 months ago
Sonia Appasamy	055394f3be	ipn/ipnlocal: add mutex to webClient struct ... Adds a new sync.Mutex field to the webClient struct, rather than using the general LocalBackend mutex. Since webClientGetOrInit (previously WebClientInit) gets called on every connection, we want to avoid holding the lock on LocalBackend just to check if the server is initialized. Moves all web_client.go funcs over to using the webClient.mu field. Updates tailscale/corp#14335 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	12 months ago
Sonia Appasamy	6f7a1b51a8	ipn/ipnlocal: rename SetWebLocalClient to ConfigureWebClient ... For consistency with the "WebClient" naming of the other functions here. Also fixed a doc typo. A #cleanup Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	12 months ago
Will Norris	9b537f7c97	ipn: remove the preview-webclient node capability ... Now that 1.54 has released, and the new web client will be included in 1.56, we can remove the need for the node capability. This means that all 1.55 unstable builds, and then eventually the 1.56 build, will work without setting the node capability. The web client still requires the "webclient" user pref, so this does NOT mean that the web client will be on by default for all devices. Updates tailscale/corp#14335 Signed-off-by: Will Norris <will@tailscale.com>	12 months ago
Will Norris	1cb8d2ffdd	ipn/ipnlocal: only call serve handler if non-nil ... return early if handler is nil. Go ahead and return the error from handler, though in this case the caller isn't doing anything with it (which has always been the case). Updates #10177 Updates #10251 Signed-off-by: Will Norris <will@tailscale.com>	12 months ago
Will Norris	b7918341f9	ipn/ipnlocal: call serve handler for local traffic ... Tailscale serve maintains a set of listeners so that serve traffic from the local device can be properly served when running in kernel networking mode. #10177 refactored that logic so that it could be reused by the internal web client as well. However, in my refactoring I missed actually calling the serve handler to handle the traffic. Updates #10177 Signed-off-by: Will Norris <will@tailscale.com>	12 months ago
Will Norris	79719f05a9	ipn/ipnlocal: remove web client listeners after close ... This prevents a panic in some cases where WebClientShutdown is called multiple times. Updates tailscale/corp#14335 Signed-off-by: Will Norris <will@tailscale.com>	12 months ago
Andrew Lytvynov	955e2fcbfb	ipn/ipnlocal: run "tailscale update" via systemd-run on Linux (#10229) ... When we run tailscled under systemd, restarting the unit kills all child processes, including "tailscale update". And during update, the package manager will restart the tailscaled unit. Specifically on Debian-based distros, interrupting `apt-get install` can get the system into a wedged state which requires the user to manually run `dpkg --configure` to recover. To avoid all this, use `systemd-run` where available to run the `tailscale update` process. This launches it in a separate temporary unit and doesn't kill it when parent unit is restarted. Also, detect when `apt-get install` complains about aborted update and try to restore the system by running `dpkg --configure tailscale`. This could help if the system unexpectedly shuts down during our auto-update. Fixes https://github.com/tailscale/corp/issues/15771 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	12 months ago
Brad Fitzpatrick	1825d2337b	ipn/ipnlocal: respect ExitNodeAllowLANAccess on iOS (#10230) ... Updates tailscale/corp#15783 Change-Id: I1082fbfff61a241ebd3b8275be0f45e329b67561 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	12 months ago
Brad Fitzpatrick	103c00a175	ipn/ipnlocal: clean up c2n handling's big switch, add a mux table ... Updates #cleanup Change-Id: I29ec03db91e7831a3a66a63dcf6ff8e3f72ab045 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	12 months ago
Joe Tsai	975c5f7684	taildrop: lazily perform full deletion scan after first taildrop use (#10137) ... Simply reading the taildrop directory can pop up security dialogs on platforms like macOS. Avoid this by only performing garbage collection of partial and deleted files after the first received taildrop file, which would have prompted the security dialog window. Updates tailscale/corp#14772 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	12 months ago
Jordan Whited	e848736927	control/controlknobs,wgengine/magicsock: implement SilentDisco toggle (#10195) ... This change exposes SilentDisco as a control knob, and plumbs it down to magicsock.endpoint. No changes are being made to magicsock.endpoint disco behavior, yet. Updates #540 Signed-off-by: Jordan Whited <jordan@tailscale.com> Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>	12 months ago
James Tucker	c54d680682	ipn,tailconfig: clean up unreleased and removed app connector service ... This was never released, and is replaced by HostInfo.AppConnector. Updates tailscale/corp#15437 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
James Tucker	0b6636295e	tailcfg,ipn/ipnlocal: add hostinfo field to replace service entry ... Updates tailscale/corp#15437 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Andrew Lytvynov	1f4a38ed49	clientupdate: add support for QNAP (#10179) ... Use the `qpkg_cli` to check for updates and install them. There are a couple special things about this compare to other updaters: * qpkg_cli can tell you when upgrade is available, but not what the version is * qpkg_cli --add Tailscale works for new installs, upgrades and reinstalling existing version; even reinstall of existing version takes a while Updates #10178 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	1 year ago
James Tucker	45be37cb01	ipn/ipnlocal: ensure that hostinfo is updated on app connector preference changes ... Some conditional paths may otherwise skip the hostinfo update, so kick it off asynchronously as other code paths do. Updates tailscale/corp#15437 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
James Tucker	933d201bba	ipn/policy: mark AppConnector service as interesting ... Updates #15437 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Naman Sood	e57fd9cda4	ipn/{ipnlocal,ipnstate,localapi}: add localapi endpoints for client self-update (#10188) ... * ipn/{ipnlocal,ipnstate,localapi}: add localapi endpoints for client self-update Updates #10187. Signed-off-by: Naman Sood <mail@nsood.in> * depaware Updates #10187. Signed-off-by: Naman Sood <mail@nsood.in> * address review feedback Signed-off-by: Naman Sood <mail@nsood.in> --------- Signed-off-by: Naman Sood <mail@nsood.in>	1 year ago
Andrew Lytvynov	55cd5c575b	ipn/localapi: only perform local-admin check in serveServeConfig (#10163) ... On unix systems, the check involves executing sudo, which is slow. Instead of doing it for every incoming request, move the logic into localapi serveServeConfig handler and do it as needed. Updates tailscale/corp#15405 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	1 year ago
Jordan Whited	12d5c99b04	client/tailscale,ipn/{ipnlocal,localapi}: check UDP GRO config (#10071) ... Updates tailscale/corp#9990 Signed-off-by: Jordan Whited <jordan@tailscale.com>	1 year ago
Will Norris	09de240934	ipn/ipnlocal: allow connecting to local web client ... The local web client has the same characteristic as tailscale serve, in that it needs a local listener to allow for connections from the local machine itself when running in kernel networking mode. This change renames and adapts the existing serveListener to allow it to be used by the web client as well. Updates tailscale/corp#14335 Signed-off-by: Will Norris <will@tailscale.com>	1 year ago
Andrew Lytvynov	bff786520e	clientupdate,ipn/ipnlocal: fix c2n update on freebsd (#10168) ... The c2n part was broken because we were not looking up the tailscale binary for that GOOS. The rest of the update was failing at the `pkg upgrade` confirmation prompt. We also need to manually restart tailscaled after update. Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	1 year ago
Tom DNetto	11a20f371a	ipn/ipnlocal: fix nil control client panic while updating TKA head ... As part of tailnet-lock netmap processing, the LocalBackend mutex is unlocked so we can potentially make a network call. Its possible (during shutdown or while the control client is being reset) for b.cc to become nil before the lock is picked up again. Fixes: #9554 Signed-off-by: Tom DNetto <tom@tailscale.com>	1 year ago
Tom DNetto	3496d62ed3	ipn/ipnlocal: add empty address to the app-connector localNets set ... App connectors handle DNS requests for app domains over PeerAPI, but a safety check verifies the requesting peer has at least permission to send traffic to 0.0.0.0:53 (or 2000:: for IPv6) before handling the DNS request. The correct filter rules are synthesized by the coordination server and sent down, but the address needs to be part of the 'local net' for the filter package to even bother checking the filter rules, so we set them here. See: https://github.com/tailscale/corp/issues/11961 for more information. Signed-off-by: Tom DNetto <tom@tailscale.com> Updates: ENG-2405	1 year ago
Charlotte Brandhorst-Satzkorn	f937cb6794	tailcfg,ipn,appc: add c2n endpoint for appc domain routes ... This change introduces a c2n endpoint that returns a map of domains to a slice of resolved IP addresses for the domain. Fixes tailscale/corp#15657 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	1 year ago
Andrew Lytvynov	9b158db2c6	ipn/localapi: require root or sudo+operator access for SetServeConfig (#10142) ... For an operator user, require them to be able to `sudo tailscale` to use `tailscale serve`. This is similar to the Windows elevated token check. Updates tailscale/corp#15405 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	1 year ago
Will Norris	6b956b49e0	client/web: add some security checks for full client ... Require that requests to servers in manage mode are made to the Tailscale IP (either ipv4 or ipv6) or quad-100. Also set various security headers on those responses. These might be too restrictive, but we can relax them as needed. Allow requests to /ok (even in manage mode) with no checks. This will be used for the connectivity check from a login client to see if the management client is reachable. Updates tailscale/corp#14335 Signed-off-by: Will Norris <will@tailscale.com>	1 year ago
Aaron Klotz	fbc18410ad	ipn/ipnauth: improve the Windows token administrator check ... (*Token).IsAdministrator is supposed to return true even when the user is running with a UAC limited token. The idea is that, for the purposes of this check, we don't care whether the user is *currently* running with full Admin rights, we just want to know whether the user can *potentially* do so. We accomplish this by querying for the token's "linked token," which should be the fully-elevated variant, and checking its group memberships. We also switch ipn/ipnserver/(*Server).connIsLocalAdmin to use the elevation check to preserve those semantics for tailscale serve; I want the IsAdministrator check to be used for less sensitive things like toggling auto-update on and off. Fixes #10036 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	1 year ago
Will Norris	658971d7c0	ipn/ipnlocal: serve web client on quad100 if enabled ... if the user pref and nodecap for the new web client are enabled, serve the client over requests to 100.100.100.100. Today, that is just a static page that lists the local Tailcale IP addresses. For now, this will render the readonly full management client, with an "access" button that sends the user through check mode. After completing check mode, they will still be in the read-only view, since they are not accessing the client over Tailscale. Instead, quad100 should serve the lobby client that has a "manage" button that will open the management client on the Tailscale IP (and trigger check mode). That is something we'll fix in a subsequent PR in the web client code itself. Updates tailscale/corp#14335 Signed-off-by: Will Norris <will@tailscale.com>	1 year ago