tailscale

Commit Graph

Author	SHA1	Message	Date
Maisem Ali	fe95d81b43	ipn/ipnlocal,wgengine/netstack: move LocalBackend specifc serving logic to LocalBackend The netstack code had a bunch of logic to figure out if the LocalBackend should handle an incoming connection and then would call the function directly on LocalBackend. Move that logic to LocalBackend and refactor the methods to return conn handlers. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Denton Gentry	5b110685fb	wgengine/netstack: increase maxInFlightConnectionAttempts Address reports of subnet router instability when running in `--tun=userspace-networking` mode. Fixes https://github.com/tailscale/corp/issues/12184 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	1 year ago
Andrew Dunham	2a9d46c38f	wgengine/magicsock: prefer private endpoints to public ones Switch our best address selection to use a scoring-based approach, where we boost each address based on whether it's a private IP or IPv6. For users in cloud environments, this biases endpoint selection towards using an endpoint that is less likely to cost the user money, and should be less surprising to users. This also involves updating the tests to not use private IPv4 addresses; other than that change, the behaviour should be identical for existing endpoints. Updates #8097 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I069e3b399daea28be66b81f7e44fc27b2943d8af	2 years ago
Denton Gentry	399a80785e	wgengine/netstack: use ping6 on BSD platforms Various BSD-derived operating systems including macOS and FreeBSD require that ping6 be used for IPv6 destinations. The "ping" command does not understand an IPv6 destination. FreeBSD 13.x and later do handle IPv6 in the regular ping command, but also retain a ping6 command. We use ping6 on all versions of FreeBSD. Fixes https://github.com/tailscale/tailscale/issues/8225 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	2 years ago
Brad Fitzpatrick	6e967446e4	tsd: add package with System type to unify subsystem init, discovery This is part of an effort to clean up tailscaled initialization between tailscaled, tailscaled Windows service, tsnet, and the mac GUI. Updates #8036 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	4d7927047c	wgengine/magicsock: annotate, skip flaky TestIsWireGuardOnlyPickEndpointByPing Updates #8037 Updates #7826 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Charlotte Brandhorst-Satzkorn	ddb4040aa0	wgengine/magicsock: add address selection for wireguard only endpoints (#7979 ) This change introduces address selection for wireguard only endpoints. If a endpoint has not been used before, an address is randomly selected to be used based on information we know about, such as if they are able to use IPv4 or IPv6. When an address is initially selected, we also initiate a new ICMP ping to the endpoints addresses to determine which endpoint offers the best latency. This information is then used to update which endpoint we should be using based on the best possible route. If the latency is the same for a IPv4 and an IPv6 address, IPv6 will be used. Updates #7826 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	2 years ago
Andrew Dunham	bcf7b63d7e	wgengine/magicsock: add hysteresis to endpoint selection Avoid selecting an endpoint as "better" than the current endpoint if the total latency improvement is less than 1%. This adds some hysteresis to avoid flapping between endpoints for a minimal improvement in latency. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: If8312e1768ea65c4b4d4e13d8de284b3825d7a73	2 years ago
Mihai Parparita	7330aa593e	all: avoid repeated default interface lookups On some platforms (notably macOS and iOS) we look up the default interface to bind outgoing connections to. This is both duplicated work and results in logspam when the default interface is not available (i.e. when a phone has no connectivity, we log an error and thus cause more things that we will try to upload and fail). Fixed by passing around a netmon.Monitor to more places, so that we can use its cached interface state. Fixes #7850 Updates #7621 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Mihai Parparita	4722f7e322	all: move network monitoring from wgengine/monitor to net/netmon We're using it in more and more places, and it's not really specific to our use of Wireguard (and does more just link/interface monitoring). Also removes the separate interface we had for it in sockstats -- it's a small enough package (we already pull in all of its dependencies via other paths) that it's not worth the extra complexity. Updates #7621 Updates #7850 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Andrew Dunham	f85dc6f97c	ci: add more lints (#7909 ) This is a follow-up to #7905 that adds two more linters and fixes the corresponding findings. As per the previous PR, this only flags things that are "obviously" wrong, and fixes the issues found. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I8739bdb7bc4f75666a7385a7a26d56ec13741b7c	2 years ago
Andrew Dunham	280255acae	various: add golangci-lint, fix issues (#7905 ) This adds an initial and intentionally minimal configuration for golang-ci, fixes the issues reported, and adds a GitHub Action to check new pull requests against this linter configuration. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I8f38fbc315836a19a094d0d3e986758b9313f163	2 years ago
Brad Fitzpatrick	d5a870b4dc	wgengine/monitor: add --monitor-duration flag to opt-in TestMonitorMode TestMonitorMode skips by default, without the --monitor flag, and then it previously ran forever. This adds an option --monitor-duration flag that defaults to zero (run forever) but if non-zero bounds how long the tests runs. This means you can then also use e.g. `go test --cpuprofile` and capture a CPU/mem profile for a minute or two. Updates #7621 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	80b138f0df	wgengine/magicsock: keep advertising endpoints after we stop discovering them Previously, when updating endpoints we would immediately stop advertising any endpoint that wasn't discovered during determineEndpoints. This could result in, for example, a case where we performed an incremental netcheck, didn't get any of our three STUN packets back, and then dropped our STUN endpoint from the set of advertised endpoints... which would result in clients falling back to a DERP connection until the next call to determineEndpoints. Instead, let's cache endpoints that we've discovered and continue reporting them to clients until a timeout expires. In the above case where we temporarily don't have a discovered STUN endpoint, we would continue reporting the old value, then re-discover the STUN endpoint again and continue reporting it as normal, so clients never see a withdrawal. Updates tailscale/coral#108 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I42de72e7418ab328a6c732bdefc74549708cf8b9	2 years ago
Brad Fitzpatrick	4b49ca4a12	wgengine/magicsock: update comments on what implements conn.Bind The comment still said *magicsock.Conn implemented wireguard-go conn.Bind. That wasn't accurate anymore. A doc #cleanup. Change-Id: I7fd003b939497889cc81147bfb937b93e4f6865c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	10f1c90f4d	wgengine/magicsock, types/nettype, etc: finish ReadFromUDPAddrPort netip migration So we're staying within the netip.Addr/AddrPort consistently and avoiding allocs/conversions to the legacy net addr types. Updates #5162 Change-Id: I59feba60d3de39f773e68292d759766bac98c917 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	29f7df9d8f	wgengine/magicsock, etc: remove mostly unused WriteTo methods Updates #2331 Updates #5162 Change-Id: I8291884425481eeaedde38a54adfd8ed7292a497 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
James Tucker	20f17d6e7b	wgengine/magicsock: reenable magicsock tests on Windows These tests are passing locally and on CI. They had failed earlier in the day when first fixing up CI, and it is not immediately clear why. I have cycled IPv6 support locally, but this should not have a substantial effect. Updates #7876 Signed-off-by: James Tucker <jftucker@gmail.com>	2 years ago
James Tucker	8dec1a8724	.github/workflows: reenable Windows CI, disable broken tests We accidentally switched to ./tool/go in `4022796484` which resulted in no longer running Windows builds, as this is attempting to run a bash script. I was unable to quickly fix the various tests that have regressed, so instead I've added skips referencing #7876, which we need to back and fix. Updates #7262 Updates #7876 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Brad Fitzpatrick	6866aaeab3	wgengine/magicsock: factor out receiveIPv4 & receiveIPv6 common code Updates #2331 Change-Id: I801df38b217f5d17203e8dc3b8654f44747e0f4b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	228d0c6aea	net/netcheck: use dnscache.Resolver when resolving DERP IPs This also adds a bunch of tests for this function to ensure that we're returning the proper IP(s) in all cases. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I0d9d57170dbab5f2bf07abdf78ecd17e0e635399	2 years ago
Maisem Ali	64bbf1738e	tailcfg: make SelfNodeV4MasqAddrForThisPeer a pointer This makes `omitempty` actually work, and saves bytes in each map response. Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Mihai Parparita	edb02b63f8	net/sockstats: pass in logger to sockstats.WithSockStats Using log.Printf may end up being printed out to the console, which is not desirable. I noticed this when I was investigating some client logs with `sockstats: trace "NetcheckClient" was overwritten by another`. That turns to be harmless/expected (the netcheck client will fall back to the DERP client in some cases, which does its own sockstats trace). However, the log output could be visible to users if running the `tailscale netcheck` CLI command, which would be needlessly confusing. Updates tailscale/corp#9230 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
James Tucker	e09c434e5d	wgengine/magicsock: remove locking sync requirements on conn disco keys The lazy initialization of the disco key is not necessary, and contributes to unnecessary locking and state checking. Updates #cleanup Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	e1b71c83ac	wgengine/magicsock: remove unused fields on discoInfo Updates #cleanup Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	a257b2f88b	wgengine/magicsock: add immutability documentation to endpointDisco Updates #7825 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	fb18af5564	wgengine/netstack: fix data-race on startup Running tailscaled with the race detector enabled immediately fires on this field, as it is updated after first read. Updates #cleanup Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Charlotte Brandhorst-Satzkorn	c573bef0aa	tailcfg,wgengine: add initial support for WireGuard only peers A peer can have IsWireGuardOnly, which means it will not support DERP or Disco, and it must have Endpoints filled in order to be usable. In the present implementation only the first Endpoint will be used as the bestAddr. Updates tailscale/corp#10351 Co-authored-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com> Co-authored-by: James Tucker <james@tailscale.com> Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	6cfcb3cae4	wgengine/magicsock: fix synchronization of endpoint disco fields Identified in review in #7821 endpoint.discoKey and endpoint.discoShort are often accessed without first taking endpoint.mu. The arrangement with endpoint.mu is inconvenient for a good number of those call-sites, so it is instead replaced with an atomic pointer to carry both pieces of disco info. This will also help with #7821 that wants to add explicit checks/guards to disable disco behaviors when disco keys are missing which is necessarily implicitly mostly covered by this change. Updates #7821 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Tom DNetto	6a627e5a33	net, wgengine/capture: encode NAT addresses in pcap stream Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
valscale	7bfb7744b7	derp,magicsock: add debug envknobs for HTTP and derp server name (#7744 ) Make developing derp easier by: 1. Creating an envknob telling clients to use HTTP to connect to derp servers, so devs don't have to acquire a valid TLS cert. 2. Creating an envknob telling clients which derp server to connect to, so devs don't have to edit the ACLs in the admin console to add a custom DERP map. 3. Explaining how the -dev and -a command lines args to derper interact. To use this: 1. Run derper with -dev. 2. Run tailscaled with TS_DEBUG_USE_DERP_HTTP=1 and TS_DEBUG_USE_DERP_ADDR=localhost This will result in the client connecting to derp via HTTP on port 3340. Fixes #7700 Signed-off-by: Val <valerie@tailscale.com>	2 years ago
Jordan Whited	f475e5550c	net/neterror, wgengine/magicsock: use UDP GSO and GRO on Linux (#7791 ) This commit implements UDP offloading for Linux. GSO size is passed to and from the kernel via socket control messages. Support is probed at runtime. UDP GSO is dependent on checksum offload support on the egress netdev. UDP GSO will be disabled in the event sendmmsg() returns EIO, which is a strong signal that the egress netdev does not support checksum offload. Updates tailscale/corp#8734 Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Andrew Dunham	8d3acc9235	util/sysresources, magicsock: scale DERP buffer based on system memory This adds the util/sysresources package, which currently only contains a function to return the total memory size of the current system. Then, we modify magicsock to scale the number of buffered DERP messages based on the system's available memory, ensuring that we never use a value lower than the previous constant of 32. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ib763c877de4d0d4ee88869078e7d512f6a3a148d	2 years ago
James Tucker	40fa2a420c	envknob,net/tstun,wgengine: use TS_DEBUG_MTU consistently Noted on #5915 TS_DEBUG_MTU was not used consistently everywhere. Extract the default into a function that can apply this centrally and use it everywhere. Added envknob.Lookup{Int,Uint}Sized to make it easier to keep CodeQL happy when using converted values. Updates #5915 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Will Norris	e99c7c3ee5	sockstats: add labels for netlog and sockstatlog packages Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Maisem Ali	985535aebc	net/tstun,wgengine/*: add support for NAT to routes This adds support to make exit nodes and subnet routers work when in scenarios where NAT is required. It also updates the NATConfig to be generated from a `wgcfg.Config` as that handles merging prefs with the netmap, so it has the required information about whether an exit node is already configured and whether routes are accepted. Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
James Tucker	c628132b34	wgengine/netstack: do not send packets to netstack after close Use the local context on Impl to check for shut down state in order to drop rather than inject packets after close has begun. Netstack sets endpoint.dispatcher to nil during shutdown. After the recent adjustment in `920ec69241` we now wait for netstack to fully shutdown before we release tests. This means that we may continue to accept packets and attempt to inject them, which we must prevent in order to avoid nil pointer panic. References google/gvisor#8765 Fixes #7715 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Jordan Whited	27e37cf9b3	go.mod, net/tstun, wgengine/magicsock: update wireguard-go (#7712 ) This commit updates the wireguard-go dependency to pull in fixes for the tun package, specifically 052af4a and aad7fca. Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Maisem Ali	920ec69241	tsnet,wgenegine/netstack: add test and fix resource leaks We were not closing the http.Server and were also not waiting for netstack to fully close. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
valscale	74eb99aed1	derp, derphttp, magicsock: send new unknown peer frame when destination is unknown (#7552 ) * wgengine/magicsock: add envknob to send CallMeMaybe to non-existent peer For testing older client version responses to the PeerGone packet format change. Updates #4326 Signed-off-by: Val <valerie@tailscale.com> * derp: remove dead sclient struct member replaceLimiter Leftover from an previous solution to the duplicate client problem. Updates #2751 Signed-off-by: Val <valerie@tailscale.com> * derp, derp/derphttp, wgengine/magicsock: add new PeerGone message type Not Here Extend the PeerGone message type by adding a reason byte. Send a PeerGone "Not Here" message when an endpoint sends a disco message to a peer that this server has no record of. Fixes #4326 Signed-off-by: Val <valerie@tailscale.com> --------- Signed-off-by: Val <valerie@tailscale.com>	2 years ago
Maisem Ali	bb31fd7d1c	net/tstun: add inital support for NAT v4 This adds support in tstun to utitilize the SelfNodeV4MasqAddrForThisPeer and perform the necessary modifications to the packet as it passes through tstun. Currently this only handles ICMP, UDP and TCP traffic. Subnet routers and Exit Nodes are also unsupported. Updates tailscale/corp#8020 Co-authored-by: Melanie Warrick <warrick@tailscale.com> Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	535fad16f8	net/tstun: rename filterIn/filterOut methods to be more descriptive Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Will Norris	57a008a1e1	all: pass log IDs as the proper type rather than strings This change focuses on the backend log ID, which is the mostly commonly used in the client. Tests which don't seem to make use of the log ID just use the zero value. Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Maisem Ali	b0cb39cda1	tsnet: only intercept TCP flows that have listeners Previously, it would accept all TCP connections and then close the ones it did not care about. Make it only ever accept the connections that it cares about. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Andrew Dunham	be107f92d3	wgengine/magicsock: track per-endpoint changes in ringbuffer This change adds a ringbuffer to each magicsock endpoint that keeps a fixed set of "changes"–debug information about what updates have been made to that endpoint. Additionally, this adds a LocalAPI endpoint and associated "debug peer-status" CLI subcommand to fetch the set of changes for a given IP or hostname. Updates tailscale/corp#9364 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I34f726a71bddd0dfa36ec05ebafffb24f6e0516a	2 years ago
Mihai Parparita	6ac6ddbb47	sockstats: switch label to enum Makes it cheaper/simpler to persist values, and encourages reuse of labels as opposed to generating an arbitrary number. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Brad Fitzpatrick	9ff51ca17f	wgengine/netstack: add support for custom UDP flow handlers To be used by tsnet and sniproxy later. Updates #5871 Updates #1748 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	1a30b2d73f	all: use tstest.Replace more Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Andrew Dunham	3f8e8b04fd	cmd/tailscale, cmd/tailscaled: move portmapper debugging into tailscale CLI The debug flag on tailscaled isn't available in the macOS App Store build, since we don't have a tailscaled binary; move it to the 'tailscale debug' CLI that is available on all platforms instead, accessed over LocalAPI. Updates #7377 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I47bffe4461e036fab577c2e51e173f4003592ff7	2 years ago
Mihai Parparita	3e71e0ef68	net/sockstats: remove explicit dependency on wgengine/monitor Followup to #7177 to avoid adding extra dependencies to the CLI. We instead declare an interface for the link monitor. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago

1 2 3 4 5 ...

1312 Commits (88097b836a1b0631d448dbfba1f55cea05640ab7)