tailscale

Commit Graph

Author	SHA1	Message	Date
Josh Bleecher Snyder	0868329936	all: use any instead of interface{} My favorite part of generics. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	7d9b1de3aa	netcheck,portmapper,magicsock: ignore some UDP write errors on Linux Treat UDP send EPERM errors as a lost UDP packet, not something super fatal. That's just the Linux firewall preventing it from going out. And add a leaf package net/neterror for that (and future) policy that all three packages can share, with tests. Updates #3619 Change-Id: Ibdb838c43ee9efe70f4f25f7fc7fdf4607ba9c1d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	2075c39fd7	net/portmapper: deflake TestPCPIntegration Logging in goroutines after the test completed caused data races and panics. Prevent that. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	a8cc519c70	net/portmapper: improve handling of UPnP parse errors Without the continue, we might overwrite our current meta with a zero meta. Log the error, so that we can check for anything unexpected. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	fddf43f3d1	net/portmapper: fill out PCP/PMP client metrics Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	9787ec6f4a	net/portmapper: add UPnP client metrics Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	40f11c50a1	net/portmapper: make PCP/PMP result codes stringers Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	38d90fa330	net/portmapper: add clientmetrics for PCP/PMP responses Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	999814e9e1	net/portmapper: handle pcp ADDRESS_MISMATCH response These show up a fair amount in our logs. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	1a629a4715	net/portmapper: mark fewer PMP probe failures as unexpected There are lots of lines in the logs of the form: portmapper: unexpected PMP probe response: {OpCode:128 ResultCode:3 SecondsSinceEpoch:NNN MappingValidSeconds:0 InternalPort:0 ExternalPort:0 PublicAddr:0.0.0.0} ResultCode 3 here means a network failure, e.g. the NAT box itself has not obtained a DHCP lease. This is not an indication that something is wrong in the Tailscale client, so use different wording here to reflect that. Keep logging, so that we can analyze and debug the reasons that PMP probes fail. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	758c37b83d	net/netns: thread logf into control functions So that darwin can log there without panicking during tests. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Denton Gentry	5302e4be96	net/portmapper: only print PCP/PMP if VerboseLogs Make UPnP, NAT-PMP, and PCP packet reception logs be [v1] so they will never appear on stdout and instead only go to logtail. ``` $ tailscale netcheck 2021/10/15 22:50:31 portmap: Got PMP response; IP: w.x.y.z, epoch: 1012707 2021/10/15 22:50:31 portmap: Got PCP response: epoch: 1012707 Report: * UDP: true * IPv4: yes, w.x.y.z:1511 * IPv6: no * MappingVariesByDestIP: true * HairPinning: false * PortMapping: NAT-PMP, PCP * Nearest DERP: San Francisco * DERP latency: - sfo: 5.9ms (San Francisco) - sea: 24ms (Seattle) - dfw: 45ms (Dallas) - ord: 53.7ms (Chicago) - nyc: 74.1ms (New York City) - tok: 111.1ms (Tokyo) - lhr: 139.4ms (London) - syd: 152.7ms (Sydney) - fra: 153.1ms (Frankfurt) - sin: 182.1ms (Singapore) - sao: 190.1ms (S_o Paulo) - blr: 218.6ms (Bangalore) ``` Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
David Anderson	060ba86baa	net/portmapper: ignore IGD SSDP responses from !defaultgw Now that we multicast the SSDP query, we can get IGD offers from devices other than the current device's default gateway. We don't want to accidentally bind ourselves to those. Updates #3197 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	4a65b07e34	net/portmapper: also send UPnP SSDP query to the SSDP multicast address. Fixes #3197 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	640134421e	all: update tests to use tstest.MemLogger And give MemLogger a mutex, as one caller had, which does match the logf contract better. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	48bdffd395	net/portmapper: remove GITHUB_ACTIONS check It's now redundant. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	b49d9bc74d	net/portmapper: fix "running a test" condition. Fixes #2686. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	cd426eaf4c	net/portmapper: fix t.Log-after-test-done race in tests Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
julianknodt	b9bd7dbc5d	net/portmapper: log upnp information This logs some basic statistics for UPnP, so that tailscale can better understand what routers are being used and how to connect to them. Signed-off-by: julianknodt <julianknodt@gmail.com>	3 years ago
julianknodt	26b6fe7f02	net/portmapper: add PCP integration test This adds a PCP test to the IGD test server, by hardcoding in a few observed packets from Denton's box. Signed-off-by: julianknodt <julianknodt@gmail.com>	3 years ago
Brad Fitzpatrick	bdb93c5942	net/portmapper: actually test something in TestProbeIntegration And use dynamic port numbers in tests, as Linux on GitHub Actions and Windows in general have things running on these ports. Co-Author: Julian Knodt <julianknodt@gmail.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	e6d4ab2dd6	net/portmapper: add start of self-contained portmapper integration tests Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
julianknodt	98d36ee18d	net/portmapper: add hook for use with prev ip PCP handles external IPs by allowing the client to specify them in the packet, which is more explicit than requiring 2 packets from PMP, so allow for future changes to add it in easily. Signed-off-by: julianknodt <julianknodt@gmail.com>	3 years ago
julianknodt	85304d7392	net/portmapper: check disable flags Signed-off-by: julianknodt <julianknodt@gmail.com>	3 years ago
julianknodt	777b711d96	net/portmapper: add pcp portmapping This adds PCP portmapping, hooking into the existing PMP portmapping. Signed-off-by: julianknodt <julianknodt@gmail.com>	3 years ago
julianknodt	5c98b1b8d0	net/portmapper: move pcp code to separate file This moves all the PCP code to a separate file in preparation for portmapping with PCP. Signed-off-by: julianknodt <julianknodt@gmail.com>	3 years ago
Josh Bleecher Snyder	a5da4ed981	all: gofmt with Go 1.17 This adds "//go:build" lines and tidies up existing "// +build" lines. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	fdc081c291	net/portmapper: fix UPnP probing, work against all ports Prior to Tailscale 1.12 it detected UPnP on any port. Starting with Tailscale 1.11.x, it stopped detecting UPnP on all ports. Then start plumbing its discovered Location header port number to the code that was assuming port 5000. Fixes #2109 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	68df379a7d	net/portmapper: rename ErrGatewayNotFound to ErrGatewayRange, reword text It confused & scared people. And it was just bad. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7b295f3d21	net/portmapper: disable UPnP on iOS for now Updates #2495 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
julianknodt	3a4201e773	net/portmapper: return correct upnp port Previously, this was incorrectly returning the internal port, and using that with the external exposed IP when it did not use WANIPConnection2. In the case when we must provide a port, we return it instead. Noticed this while implementing the integration test for upnp. Signed-off-by: julianknodt <julianknodt@gmail.com>	3 years ago
Brad Fitzpatrick	171ec9f8f4	control/{controlknobs,controlclient}: simplify knobs API, fix controlclient crash From integration tests elsewhere: panic: runtime error: invalid memory address or nil pointer dereference [signal SIGSEGV: segmentation violation code=0x1 addr=0x70 pc=0x845c9b] goroutine 226 [running]: tailscale.com/control/controlclient.(Direct).sendMapRequest(0xc00053e1e0, 0x16670f0, 0xc000353780, 0xffffffffffffffff, 0xc0003e5f10, 0x0, 0x0) /home/runner/go/pkg/mod/tailscale.com@v1.1.1-0.20210715222212-1bb6abc604c1/control/controlclient/direct.go:803 +0x19bb tailscale.com/control/controlclient.(Direct).PollNetMap(...) /home/runner/go/pkg/mod/tailscale.com@v1.1.1-0.20210715222212-1bb6abc604c1/control/controlclient/direct.go:574 tailscale.com/control/controlclient.(Auto).mapRoutine(0xc00052a1e0) /home/runner/go/pkg/mod/tailscale.com@v1.1.1-0.20210715222212-1bb6abc604c1/control/controlclient/auto.go:464 +0x571 created by tailscale.com/control/controlclient.(Auto).Start /home/runner/go/pkg/mod/tailscale.com@v1.1.1-0.20210715222212-1bb6abc604c1/control/controlclient/auto.go:151 +0x65 exit status 2 Also remove types/opt.Bool API addition which is now unnecessary. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
julianknodt	1bb6abc604	net/portmapper: add upnp port mapping Add in UPnP portmapping, using goupnp library in order to get the UPnP client and run the portmapping functions. This rips out anywhere where UPnP used to be in portmapping, and has a flow separate from PMP and PCP. RELNOTE=portmapper now supports UPnP mappings Fixes #682 Updates #2109 Signed-off-by: julianknodt <julianknodt@gmail.com>	3 years ago
Brad Fitzpatrick	92077ae78c	wgengine/magicsock: make portmapping async Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Crawshaw	297b3d6fa4	staticcheck.conf: turn off noisy lint errors Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
Josh Bleecher Snyder	25df067dd0	all: adapt to opaque netaddr types This commit is a mishmash of automated edits using gofmt: gofmt -r 'netaddr.IPPort{IP: a, Port: b} -> netaddr.IPPortFrom(a, b)' -w . gofmt -r 'netaddr.IPPrefix{IP: a, Port: b} -> netaddr.IPPrefixFrom(a, b)' -w . gofmt -r 'a.IP.Is4 -> a.IP().Is4' -w . gofmt -r 'a.IP.As16 -> a.IP().As16' -w . gofmt -r 'a.IP.Is6 -> a.IP().Is6' -w . gofmt -r 'a.IP.As4 -> a.IP().As4' -w . gofmt -r 'a.IP.String -> a.IP().String' -w . And regexps: \w(.)\.Port = (.) -> $1 = $1.WithPort($2) \w(.)\.IP = (.) -> $1 = $1.WithIP($2) And lots of manual fixups. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
David Anderson	6fb5d4080c	net/portmapper: silently handle PCP NOT_AUTHORIZED responses. Fixes #1525. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	44ab0acbdb	net/portmapper, wgengine/monitor: cache gateway IP info until link changes Cuts down allocs & CPU in steady state (on regular STUN probes) when network is unchanging. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	ef7bac2895	tailcfg, net/portmapper, wgengine/magicsock: add NetInfo.HavePortMap Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	63ed4dd6c9	net/portmapper: fix typo Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c64bd587ae	net/portmapper: add NAT-PMP client, move port mapping service probing * move probing out of netcheck into new net/portmapper package * use PCP ANNOUNCE op codes for PCP discovery, rather than causing short-lived (sub-second) side effects with a 1-second-expiring map + delete. * track when we heard things from the router so we can be less wasteful in querying the router's port mapping services in the future * use portmapper from magicsock to map a public port Fixes #1298 Fixes #1080 Fixes #1001 Updates #864 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago

1 2

91 Commits (8130656780a559b21d3ed996e9e4c1aaa64d42cc)