tailscale

Commit Graph

Author	SHA1	Message	Date
Brad Fitzpatrick	da8def8e13	all: remove old +build tags The //go:build syntax was introduced in Go 1.17: https://go.dev/doc/go1.17#build-lines gofmt has kept the +build and go:build lines in sync since then, but enough time has passed. Time to remove them. Done with: perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build') Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Josh Soref	d4811f11a0	all: fix spelling mistakes Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>	2 years ago
Maisem Ali	a9f6cd41fd	all: use syncs.AtomicValue Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	9bb5a038e5	all: use atomic.Pointer Also add some missing docs. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	116f55ff66	all: gofmt for Go 1.19 Updates #5210 Change-Id: Ib02cd5e43d0a8db60c1f09755a8ac7b140b670be Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Aaron Klotz	b005b79236	net/dns, paths, util/winutil: change net/dns/windowsManager NRPT management to support more than 50 domains. AFAICT this isn't documented on MSDN, but based on the issue referenced below, NRPT rules are not working when a rule specifies > 50 domains. This patch modifies our NRPT rule generator to split the list of domains into chunks as necessary, and write a separate rule for each chunk. For compatibility reasons, we continue to use the hard-coded rule ID, but as additional rules are required, we generate new GUIDs. Those GUIDs are stored under the Tailscale registry path so that we know which rules are ours. I made some changes to winutils to add additional helper functions in support of both the code and its test: I added additional registry accessors, and also moved some token accessors from paths to util/winutil. Fixes https://github.com/tailscale/coral/issues/63 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	3 years ago
Brad Fitzpatrick	db85384f9c	cmd/tailscaled: default to userspace-networking mode on gokrazy, set paths One of the current few steps to run Tailscale on gokrazy is to specify the --tun=userspace-networking flag: https://gokrazy.org/userguide/install/tailscale/ Instead, make it the default for now. Later we can change the default to kernel mode if available and fall back to userspace mode like Synology, once #391 is done. Likewise, set default paths for Gokrazy, as its filesystem hierarchy is not the Linux standard one. Instead, use the conventional paths as documented at https://gokrazy.org/userguide/install/tailscale/. Updates #1866 RELNOTE=default to userspace-networking mode on gokrazy Change-Id: I3766159a294738597b4b30629d2860312dbb7609 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	486059589b	all: gofmt -w -s (simplify) tests And it updates the build tag style on a couple files. Change-Id: I84478d822c8de3f84b56fa1176c99d2ea5083237 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	40e13c316c	paths: add missing js/wasm stub Change-Id: Iae4838f5fa1dc0cd491d5a3ac906fd3cdacb173c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	9310713bfb	all: fix some js/wasm compilation issues Change-Id: I05a3a4835e225a1e413ec3540a7c7e4a2d477084 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Aaron Klotz	6425f497b1	ipn/ipnserver paths: add paths.LegacyStateFilePath Moving this information into a centralized place so that it is accessible to code in subsequent commits. Updates #3011 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	3 years ago
Brad Fitzpatrick	5263c8d0b5	paths: skip unix chmod if state directory is already 0700 Updates #2934 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Aaron Klotz	21e9f98fc1	ipn, paths: unconditionally attempt to set state dir perms, but only if the state dir is ours We unconditionally set appropriate perms on the statefile dir. We look at the basename of the statefile dir, and if it is "tailscale", then we set perms as appropriate. Fixes #2925 Updates #2856 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	3 years ago
Aaron Klotz	9ebb5d4205	ipn, paths: ensure that the state directory for Windows has the correct perms ProgramData has a permissive ACL. For us to safely store machine-wide state information, we must set a more restrictive ACL on our state directory. We set the ACL so that only talescaled's user (ie, LocalSystem) and the Administrators group may access our directory. We must include Administrators to ensure that logs continue to be easily accessible; omitting that group would force users to use special tools to log in interactively as LocalSystem, which is not ideal. (Note that the ACL we apply matches the ACL that was used for LocalSystem's AppData\Local). There are two cases where we need to reset perms: One is during migration from the old location to the new. The second case is for clean installations where we are creating the file store for the first time. Updates #2856 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	3 years ago
Brad Fitzpatrick	7d8227e7a6	logpolicy: don't use C:\ProgramData use for tailscale-ipn GUI's log dir tailscale-ipn.exe (the GUI) shouldn't use C:\ProgramData. Also, migrate the earlier misnamed wg32/wg64 conf files if they're present. (That was stopped in `2db877caa3`, but the files exist from fresh 1.14 installs) Updates #2856 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Denton Gentry	280c84e46a	ipn/ipnserver, paths, logpolicy: move Window config files out of %LocalAppData% C:\WINDOWS\system32\config\systemprofile\AppData\Local\ is frequently cleared for almost any reason: Windows updates, System Restore, even various System Cleaner utilities. The server-state.conf file in AppData\Local could be deleted at any time, which would break login until the node is removed from the Admin Panel allowing it to create a new key. Carefully copy any AppData state to ProgramData at startup. If copying the state fails, continue to use AppData so at least there will be connectivity. If there is no state, use ProgramData. We also migrate the log.conf file. Very old versions of Tailscale named the EXE tailscale-ipn, so the log conf was tailscale-ipn.log.conf and more recent versions preserved this filename and cmdName in logs. In this migration we always update the filename to c:\ProgramData\Tailscale\tailscaled.log.conf Updates https://github.com/tailscale/tailscale/issues/2856 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Josh Bleecher Snyder	a5da4ed981	all: gofmt with Go 1.17 This adds "//go:build" lines and tidies up existing "// +build" lines. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Maisem Ali	95e296fd96	cmd/tailscale/web: restrict web access to synology admins. Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Elias Naur	adfe8cf41d	paths: generalize IOSSharedDir to cover Android Also fix an error message while here. Signed-off-by: Elias Naur <mail@eliasnaur.com>	4 years ago
David Crawshaw	85beaa52b3	paths: add synology socket path Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
Brad Fitzpatrick	950fc28887	ipn, paths, cmd/tailscaled: remove LegacyConfigPath, relaynode migration It is time. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c3bee0b722	ipn/ipnlocal: make peerapi work on iOS again It didn't have a storage directory. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	33bc69cf1f	paths: fall back to XDG_DATA_HOME for non-root users' state dir So peerapi has a default state directory, mostly for netstack mode testing. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	54e108ff4e	paths: update some default paths for darwin	4 years ago
Brad Fitzpatrick	a7562be5e1	cmd/tailscaled: move more of the Windows server setup code into tailscaled Updates #1232	4 years ago
Brad Fitzpatrick	f98706bdb3	paths, cmd/tailscaled: on Windows, don't try to migrate from legacy relay.conf Avoids confusing logspam on Windows.	4 years ago
David Anderson	dbc99dc0d2	paths: use /var/db for state on BSDs, and /var/run for sockets. On BSD, /var/db is what linux calls /var/lib. On modern linux, /run and /var/run are the same directory, but on BSD the correct path is /var/run, so use that. Fixes #79 Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
Brad Fitzpatrick	383d86df5f	paths: remove some debug logging I left in	5 years ago
Brad Fitzpatrick	65e7c58aa4	cmd/tailscale, cmd/tailscaled, paths: add paths package for default paths Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago

29 Commits (8049053f86a0b7cc0eca2aef9e14032de8c28d35)