tailscale

Commit Graph

Author	SHA1	Message	Date
Brad Fitzpatrick	27c4dd9a97	Revert "cmd/tailscaled, ipn/{ipnlocal,ipnserver}: let netstack get access to LocalBackend" This reverts commit `2bc518dcb2`. @namansood didn't end up needing it in his `770aa71ffb`.	4 years ago
Brad Fitzpatrick	2bc518dcb2	cmd/tailscaled, ipn/{ipnlocal,ipnserver}: let netstack get access to LocalBackend Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	d491adbf09	cmd/tailscaled: on Synology, fall back to netstack if needed Updates tailscale/tailscale-synology#35 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	0d0ec7853c	cmd/tailscaled: don't require root on darwin with --tun=userspace-networking Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c0cdca6d06	cmd/tailscaled, logtail: share link monitor from wgengine to logtail Part of overall effort to clean up, unify, use link monitoring more, and make Tailscale quieter when all networks are down. This is especially bad on macOS where we can get killed for not being polite it seems. (But we should be polite in any case) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	38dc6fe758	cmd/tailscaled, wgengine: remove --fake, replace with netstack And add a --socks5-server flag. And fix a race in SOCKS5 replies where the response header was written concurrently with the copy from the backend. Co-authored with Naman Sood. Updates #707 Updates #504 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	ee6475a44d	wgengine: unify NewUserspaceEngine, NewUserspaceEngineAdvanced Also rename EngineConfig to Config to avoid wgengine.EngineConfig stutter. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Naman Sood	517c90d7e5	wgengine, cmd/tailscaled: refactor netstack, forward TCP to hello as demo (#1301 ) Updates #707 Updates #504 Signed-off-by: Naman Sood <mail@nsood.in>	4 years ago
Brad Fitzpatrick	38629b62fc	cmd/tailscaled: on darwin, fail early if not root with nicer message Don't do it on all platforms, as Linux folk might be playing container + capability games.	4 years ago
Brad Fitzpatrick	d7569863b5	cmd/tailscaled: fix up install-system-daemon on darwin, add uninstall too Tangentially related to #987, #177, #594, #925, #505	4 years ago
Brad Fitzpatrick	29b028b9c4	cmd/tailscaled: add subcommand on darwin to install+start tailscaled under launchd Tangentially related to #987, #177, #594, #925.	4 years ago
Brad Fitzpatrick	6680976b50	cmd/tailscaled: pick automatic tun device name on darwin	4 years ago
Brad Fitzpatrick	a7562be5e1	cmd/tailscaled: move more of the Windows server setup code into tailscaled Updates #1232	4 years ago
Brad Fitzpatrick	6099ecf7f4	cmd/tailscaled: run as a service on Windows Updates #1232	4 years ago
Brad Fitzpatrick	6254efb9ef	cmd/tailscale{,d}: move debug subcommand to tailscaled Work on reducing the size of the tailscale binary, which is currently pulling in most of the same code as tailscaled. Updates #1181	4 years ago
Brad Fitzpatrick	eb47cba435	cmd/tailscaled: don't require --state for --cleanup	4 years ago
Brad Fitzpatrick	5aa5db89d6	cmd/tailscaled, wgengine/netstack: add start of gvisor userspace netstack work Not usefully functional yet (mostly a proof of concept), but getting it submitted for some work @namansood is going to do atop this. Updates #707 Updates #634 Updates #48 Updates #835	4 years ago
Brad Fitzpatrick	57dd247376	cmd/tailscaled, logpolicy, logtail: support log levels Log levels can now be specified with "[v1] " or "[v2] " substrings that are then stripped and filtered at the final logger. This follows our existing "[unexpected]" etc convention and doesn't require a wholesale reworking of our logging at the moment. cmd/tailscaled then gets a new --verbose=N flag to take a log level that controls what gets logged to stderr (and thus systemd, syslog, etc). Logtail is unaffected by --verbose. This commit doesn't add annotations to any existing log prints. That is in the next commit. Updates #924 Updates #282 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	54e6c3a290	version: use OSS repo's version when building. When building with redo, also include the git commit hash from the proprietary repo, so that we have a precise commit that identifies all build info (including Go toolchain version). Add a top-level build script demonstrating to downstream distros how to burn the right information into builds. Adjust `tailscale version` to print commit hashes when available. Fixes #841. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	86c271caba	types/logger: move RusagePrefixLog to logger package, disable by default The RusagePrefixLog is rarely useful, hasn't been useful in a long time, is rarely the measurement we need, and is pretty spammy (and syscall-heavy). Disable it by default. We can enable it when we're debugging memory.	4 years ago
Brad Fitzpatrick	8b94a769be	cmd/tailscaled: use the standard flag page instead of getopt Per discussion with @crawshaw. The CLI tool already used std flag anyway. If either of them, it would've made more sense for the CLI to use getopt.	4 years ago
David Anderson	9e26ffecf8	cmd/tailscaled: ignore SIGPIPE. SIGPIPE can be generated when CLIs disconnect from tailscaled. This should not terminate the process. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	d64de1ddf7	Revert "cmd/tailscaled: exit gracefully on SIGPIPE" tailscaled receives a SIGPIPE when CLIs disconnect from it. We shouldn't shut down in that case. This reverts commit `43b271cb26`. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Dmytro Shynkevych	43b271cb26	cmd/tailscaled: exit gracefully on SIGPIPE Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Brad Fitzpatrick	ff8c8db9d3	cmd/tailscaled: log on shutdown signal	4 years ago
Brad Fitzpatrick	4aba86cc03	ipn/ipnserver: make Engine argument a func that tries again for each connection So a backend in server-an-error state (as used by Windows) can try to create a new Engine again each time somebody re-connects, relaunching the GUI app. (The proper fix is actually fixing Windows issues, but this makes things better in the short term) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Dmytro Shynkevych	318751c486	cmd/tailscaled: always flush logs properly Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Brad Fitzpatrick	e589c76e98	cmd/tailscaled: don't require --socket path on windows	4 years ago
Brad Fitzpatrick	c1d9e41bef	cmd/tailscaled: use "Tailscale" as default TUN device name on Windows That's what's used in the Windows GUI version and seems special. If we don't use that, Windows tries to rename it and fails.	4 years ago
Brad Fitzpatrick	f98706bdb3	paths, cmd/tailscaled: on Windows, don't try to migrate from legacy relay.conf Avoids confusing logspam on Windows.	4 years ago
Dmytro Shynkevych	61abab999e	cmd/tailscaled: graceful shutdown (#534 ) Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Avery Pennarun	af9328c1b7	log rate limiting: reformat limiter messages, and use nonempty burst size. - Reformat the warning about a message being rate limited to print the format string, rather than the formatted message. This helps give a clue what "type" of message is being limited. - Change the rate limit warning to be [RATE LIMITED] in all caps. This uses less space on each line, plus is more noticeable. - In tailscaled, change the frequency to be less often (once every 5 seconds per format string) but to allow bursts of up to 5 messages. This greatly reduces the number of messages that are rate limited during startup, but allows us to tighten the limit even further during normal runtime. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	f2db4ac277	cmd/tailscaled: SetGCPercent() if GOGC is not set. This cuts RSS from ~30MB to ~20MB on my machine, after the previous fix to get rid of unnecessary zstd buffers. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	d074ec6571	cmd/tailscaled: eliminate unnecessary use of an init() function. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Wendi Yu	bb55694c95	wgengine: log node IDs when peers are added/removed (#381 ) Also stop logging data sent/received from nodes we're not connected to (ie all those `x`s being logged in the `peers: ` line) Signed-off-by: Wendi <wendi.yu@yahoo.ca>	5 years ago
Wendi Yu	0c69b4e00d	Implement rate limiting on log messages (#356 ) Implement rate limiting on log messages Addresses issue #317, where logs can get spammed with the same message nonstop. Created a rate limiting closure on logging functions, which limits the number of messages being logged per second based on format string. To keep memory usage as constant as possible, the previous cache purging at periodic time intervals has been replaced by an LRU that discards the oldest string when the capacity of the cache is reached. Signed-off-by: Wendi Yu <wendi.yu@yahoo.ca>	5 years ago
David Anderson	1ac570def7	wgengine/router: split out from wgengine. The router implementations are logically separate, with their own API. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	45f2b53aca	all: remove unnecessary trailing newlines in format patterns for consistency And document on logger.Logf that it's unnecessary.	5 years ago
Brad Fitzpatrick	322499473e	cmd/tailscaled, wgengine, ipn: add /debug/ipn handler with world state Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Avery Pennarun	509247bf42	tailscale, tailscaled: update safesocket port number. This makes them able to connect to each other on Windows.	5 years ago
Martin Baillie	8ae3ba0cf5	wgengine: define default tunname for each platform The device name "tailscale0" will be used for all platforms except for OpenBSD where "tun" is enforced by the kernel. `CreateTUN()` in `wireguard-go` will select the next available "tunX" device name on the OpenBSD system. Signed-off-by: Martin Baillie <martin@baillie.email>	5 years ago
Brad Fitzpatrick	65e7c58aa4	cmd/tailscale, cmd/tailscaled, paths: add paths package for default paths Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	0c55777fed	ipn: temporary support for loading legacy relaynode configs. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	15b4d26d92	logpolicy: automatically figure out paths and filenames. The autoselection should pick sensible paths for all of: - Windows (LocalAppData) - Mac (Library/Caches) - Unix user (XDG_CACHE_DIR) - Linux systemd service (CACHE_DIRECTORY) As a last resort, if cache dir lookup fails, plops sufficiently uniquely named files into the current working directory. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	85ac82c386	tailscaled: default to a sock in current dir, for development. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	76819e7432	tailscaled: call the network interface tailscale0, not ts0. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	4460bd638b	safesocket: simplify API. On unix, we want to provide a full path to the desired unix socket. On windows, currently we want to provide a TCP port, but someday we'll also provide a "path-ish" object for a named pipe. For now, simplify the API down to exactly a path and a TCP port. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	62fb652eef	cmd/tailscaled: run off internal state autonomously. With this change, tailscaled can be restarted and reconnect without interaction from `tailscale`, and `tailscale` is merely there to provide login assistance and adjust preferences. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
Brad Fitzpatrick	79295b1138	wgengine: simplify, change some signatures * make RouterGen return an error, not take both tunname and tundev * also remove RouteGen taking a wireguard/device.Device; currently unused * remove derp parameter (it'll work differently) * unexport NewUserspaceRouter in per-OS impls, add documented wrapper Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	dec5d64593	ipn/ipnserver: remove Options.AllowQuit. It was previously used by the MacOS client, but it now does something different. ipnserver should never obey a client's request to exit. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago

1 2

51 Commits (79f02de55f8ef0712f7397a9d7ee7319c55433f7)